* [U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC2 support @ 2018-10-14 16:49 ` Meul, Dirk 2018-10-15 7:44 ` Marek Szyprowski 2018-10-15 14:19 ` Lukasz Majewski 0 siblings, 2 replies; 6+ messages in thread From: Meul, Dirk @ 2018-10-14 16:49 UTC (permalink / raw) To: u-boot Odroid HC2 board is based on Odroid XU4 board, like the Odroid HC1. The linux kernel does not provide a hc2 DTB so the hc1 DTB is also used for the Odroid HC2. Signed-off-by: Dirk Meul <dirk.meul@rwth-aachen.de> --- board/samsung/common/exynos5-dt-types.c | 16 +++++++++++++--- board/samsung/common/exynos5-dt.c | 4 ++-- configs/odroid-xu3_defconfig | 2 +- include/samsung/exynos5-dt-types.h | 2 ++ 4 files changed, 18 insertions(+), 6 deletions(-) diff --git a/board/samsung/common/exynos5-dt-types.c b/board/samsung/common/exynos5-dt-types.c index 4473968db6..7a86e91877 100644 --- a/board/samsung/common/exynos5-dt-types.c +++ b/board/samsung/common/exynos5-dt-types.c @@ -24,14 +24,15 @@ static const struct udevice_id board_ids[] = { }; /** - * Odroix XU3/XU4/HC1 board revisions (from HC1_MAIN_REV0.1_20170630.pdf): + * Odroix XU3/XU4/HC1/HC2 board revisions (from HC1+_HC2_MAIN_REV0.1_20171017.pdf): * Rev ADCmax Board * 0.1 0 XU3 0.1 * 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT (probe I2C0:0x40 / INA231) * 0.3 1280 XU4 0.1 * 0.4 739 XU4 0.2 * 0.5 1016 XU4+Air0.1 (Passive cooling) - * 0.6 1308 XU4S 0.1 (HC1) + * 0.6 1309 XU4-HC1 0.1 + * 0.7 1470 XU4-HC1+ 0.1 (HC2) * Use +1% for ADC value tolerance in the array below, the code loops until * the measured ADC value is lower than then ADCmax from the array. */ @@ -39,7 +40,8 @@ struct odroid_rev_info odroid_info[] = { { EXYNOS5_BOARD_ODROID_XU3_REV01, 1, 10, "xu3" }, { EXYNOS5_BOARD_ODROID_XU3_REV02, 2, 375, "xu3" }, { EXYNOS5_BOARD_ODROID_XU4_REV01, 1, 1293, "xu4" }, - { EXYNOS5_BOARD_ODROID_HC1_REV01, 1, 1321, "hc1" }, + { EXYNOS5_BOARD_ODROID_HC1_REV01, 1, 1322, "hc1" }, + { EXYNOS5_BOARD_ODROID_HC2_REV01, 1, 1484, "hc1" }, { EXYNOS5_BOARD_ODROID_UNKNOWN, 0, 4095, "unknown" }, }; @@ -144,6 +146,14 @@ bool board_is_odroidhc1(void) return false; } +bool board_is_odroidhc2(void) +{ + if (gd->board_type == EXYNOS5_BOARD_ODROID_HC2_REV01) + return true; + + return false; +} + bool board_is_generic(void) { if (gd->board_type == EXYNOS5_BOARD_GENERIC) diff --git a/board/samsung/common/exynos5-dt.c b/board/samsung/common/exynos5-dt.c index 8c3a9ea564..c183965b92 100644 --- a/board/samsung/common/exynos5-dt.c +++ b/board/samsung/common/exynos5-dt.c @@ -179,7 +179,7 @@ char *get_dfu_alt_system(char *interface, char *devstr) { char *info = "Not supported!"; - if (board_is_odroidxu4() || board_is_odroidhc1()) + if (board_is_odroidxu4() || board_is_odroidhc1() || board_is_odroidhc2()) return info; return env_get("dfu_alt_system"); @@ -192,7 +192,7 @@ char *get_dfu_alt_boot(char *interface, char *devstr) char *alt_boot; int dev_num; - if (board_is_odroidxu4() || board_is_odroidhc1()) + if (board_is_odroidxu4() || board_is_odroidhc1() || board_is_odroidhc2()) return info; dev_num = simple_strtoul(devstr, NULL, 10); diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig index 258b9781cc..d5c7cc7129 100644 --- a/configs/odroid-xu3_defconfig +++ b/configs/odroid-xu3_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_SYS_TEXT_BASE=0x43E00000 CONFIG_ARCH_EXYNOS5=y -CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1" +CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1/HC2" CONFIG_DISTRO_DEFAULTS=y CONFIG_NR_DRAM_BANKS=8 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/include/samsung/exynos5-dt-types.h b/include/samsung/exynos5-dt-types.h index 8e11af30d1..8fe08fe211 100644 --- a/include/samsung/exynos5-dt-types.h +++ b/include/samsung/exynos5-dt-types.h @@ -9,6 +9,7 @@ enum { EXYNOS5_BOARD_ODROID_XU3_REV02, EXYNOS5_BOARD_ODROID_XU4_REV01, EXYNOS5_BOARD_ODROID_HC1_REV01, + EXYNOS5_BOARD_ODROID_HC2_REV01, EXYNOS5_BOARD_ODROID_UNKNOWN, EXYNOS5_BOARD_COUNT, @@ -25,5 +26,6 @@ bool board_is_generic(void); bool board_is_odroidxu3(void); bool board_is_odroidxu4(void); bool board_is_odroidhc1(void); +bool board_is_odroidhc2(void); #endif -- 2.17.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC2 support 2018-10-14 16:49 ` [U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC2 support Meul, Dirk @ 2018-10-15 7:44 ` Marek Szyprowski 2018-10-15 14:19 ` Lukasz Majewski 1 sibling, 0 replies; 6+ messages in thread From: Marek Szyprowski @ 2018-10-15 7:44 UTC (permalink / raw) To: u-boot Hi All, On 2018-10-14 18:49, Meul, Dirk wrote: > Odroid HC2 board is based on Odroid XU4 board, like the Odroid HC1. > > The linux kernel does not provide a hc2 DTB so the hc1 DTB is also used > for the Odroid HC2. > > Signed-off-by: Dirk Meul <dirk.meul@rwth-aachen.de> I don't have access to HC2, but the code looks reasonable and does similar things I did while adding support for Odroid HC1. Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > board/samsung/common/exynos5-dt-types.c | 16 +++++++++++++--- > board/samsung/common/exynos5-dt.c | 4 ++-- > configs/odroid-xu3_defconfig | 2 +- > include/samsung/exynos5-dt-types.h | 2 ++ > 4 files changed, 18 insertions(+), 6 deletions(-) > > diff --git a/board/samsung/common/exynos5-dt-types.c > b/board/samsung/common/exynos5-dt-types.c > index 4473968db6..7a86e91877 100644 > --- a/board/samsung/common/exynos5-dt-types.c > +++ b/board/samsung/common/exynos5-dt-types.c > @@ -24,14 +24,15 @@ static const struct udevice_id board_ids[] = { > }; > > /** > - * Odroix XU3/XU4/HC1 board revisions (from > HC1_MAIN_REV0.1_20170630.pdf): > + * Odroix XU3/XU4/HC1/HC2 board revisions (from > HC1+_HC2_MAIN_REV0.1_20171017.pdf): > * Rev ADCmax Board > * 0.1 0 XU3 0.1 > * 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT (probe I2C0:0x40 / > INA231) > * 0.3 1280 XU4 0.1 > * 0.4 739 XU4 0.2 > * 0.5 1016 XU4+Air0.1 (Passive cooling) > - * 0.6 1308 XU4S 0.1 (HC1) > + * 0.6 1309 XU4-HC1 0.1 > + * 0.7 1470 XU4-HC1+ 0.1 (HC2) > * Use +1% for ADC value tolerance in the array below, the code loops > until > * the measured ADC value is lower than then ADCmax from the array. > */ > @@ -39,7 +40,8 @@ struct odroid_rev_info odroid_info[] = { > { EXYNOS5_BOARD_ODROID_XU3_REV01, 1, 10, "xu3" }, > { EXYNOS5_BOARD_ODROID_XU3_REV02, 2, 375, "xu3" }, > { EXYNOS5_BOARD_ODROID_XU4_REV01, 1, 1293, "xu4" }, > - { EXYNOS5_BOARD_ODROID_HC1_REV01, 1, 1321, "hc1" }, > + { EXYNOS5_BOARD_ODROID_HC1_REV01, 1, 1322, "hc1" }, > + { EXYNOS5_BOARD_ODROID_HC2_REV01, 1, 1484, "hc1" }, > { EXYNOS5_BOARD_ODROID_UNKNOWN, 0, 4095, "unknown" }, > }; > > @@ -144,6 +146,14 @@ bool board_is_odroidhc1(void) > return false; > } > > +bool board_is_odroidhc2(void) > +{ > + if (gd->board_type == EXYNOS5_BOARD_ODROID_HC2_REV01) > + return true; > + > + return false; > +} > + > bool board_is_generic(void) > { > if (gd->board_type == EXYNOS5_BOARD_GENERIC) > diff --git a/board/samsung/common/exynos5-dt.c > b/board/samsung/common/exynos5-dt.c > index 8c3a9ea564..c183965b92 100644 > --- a/board/samsung/common/exynos5-dt.c > +++ b/board/samsung/common/exynos5-dt.c > @@ -179,7 +179,7 @@ char *get_dfu_alt_system(char *interface, char > *devstr) > { > char *info = "Not supported!"; > > - if (board_is_odroidxu4() || board_is_odroidhc1()) > + if (board_is_odroidxu4() || board_is_odroidhc1() || > board_is_odroidhc2()) > return info; > > return env_get("dfu_alt_system"); > @@ -192,7 +192,7 @@ char *get_dfu_alt_boot(char *interface, char *devstr) > char *alt_boot; > int dev_num; > > - if (board_is_odroidxu4() || board_is_odroidhc1()) > + if (board_is_odroidxu4() || board_is_odroidhc1() || > board_is_odroidhc2()) > return info; > > dev_num = simple_strtoul(devstr, NULL, 10); > diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig > index 258b9781cc..d5c7cc7129 100644 > --- a/configs/odroid-xu3_defconfig > +++ b/configs/odroid-xu3_defconfig > @@ -2,7 +2,7 @@ CONFIG_ARM=y > CONFIG_ARCH_EXYNOS=y > CONFIG_SYS_TEXT_BASE=0x43E00000 > CONFIG_ARCH_EXYNOS5=y > -CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1" > +CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1/HC2" > CONFIG_DISTRO_DEFAULTS=y > CONFIG_NR_DRAM_BANKS=8 > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > diff --git a/include/samsung/exynos5-dt-types.h > b/include/samsung/exynos5-dt-types.h > index 8e11af30d1..8fe08fe211 100644 > --- a/include/samsung/exynos5-dt-types.h > +++ b/include/samsung/exynos5-dt-types.h > @@ -9,6 +9,7 @@ enum { > EXYNOS5_BOARD_ODROID_XU3_REV02, > EXYNOS5_BOARD_ODROID_XU4_REV01, > EXYNOS5_BOARD_ODROID_HC1_REV01, > + EXYNOS5_BOARD_ODROID_HC2_REV01, > EXYNOS5_BOARD_ODROID_UNKNOWN, > > EXYNOS5_BOARD_COUNT, > @@ -25,5 +26,6 @@ bool board_is_generic(void); > bool board_is_odroidxu3(void); > bool board_is_odroidxu4(void); > bool board_is_odroidhc1(void); > +bool board_is_odroidhc2(void); > > #endif > -- > 2.17.1 > > Best regards -- Marek Szyprowski, PhD Samsung R&D Institute Poland ^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC2 support 2018-10-14 16:49 ` [U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC2 support Meul, Dirk 2018-10-15 7:44 ` Marek Szyprowski @ 2018-10-15 14:19 ` Lukasz Majewski 2018-10-17 6:26 ` Minkyu Kang 1 sibling, 1 reply; 6+ messages in thread From: Lukasz Majewski @ 2018-10-15 14:19 UTC (permalink / raw) To: u-boot Hi Dirk, > Odroid HC2 board is based on Odroid XU4 board, like the Odroid HC1. > > The linux kernel does not provide a hc2 DTB so the hc1 DTB is also > used for the Odroid HC2. > > Signed-off-by: Dirk Meul <dirk.meul@rwth-aachen.de> > --- > board/samsung/common/exynos5-dt-types.c | 16 +++++++++++++--- > board/samsung/common/exynos5-dt.c | 4 ++-- > configs/odroid-xu3_defconfig | 2 +- > include/samsung/exynos5-dt-types.h | 2 ++ > 4 files changed, 18 insertions(+), 6 deletions(-) > > diff --git a/board/samsung/common/exynos5-dt-types.c > b/board/samsung/common/exynos5-dt-types.c index > 4473968db6..7a86e91877 100644 --- > a/board/samsung/common/exynos5-dt-types.c +++ > b/board/samsung/common/exynos5-dt-types.c @@ -24,14 +24,15 @@ static > const struct udevice_id board_ids[] = { }; > > /** > - * Odroix XU3/XU4/HC1 board revisions (from > HC1_MAIN_REV0.1_20170630.pdf): > + * Odroix XU3/XU4/HC1/HC2 board revisions (from > HC1+_HC2_MAIN_REV0.1_20171017.pdf): > * Rev ADCmax Board > * 0.1 0 XU3 0.1 > * 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT (probe I2C0:0x40 / > INA231) > * 0.3 1280 XU4 0.1 > * 0.4 739 XU4 0.2 > * 0.5 1016 XU4+Air0.1 (Passive cooling) > - * 0.6 1308 XU4S 0.1 (HC1) > + * 0.6 1309 XU4-HC1 0.1 > + * 0.7 1470 XU4-HC1+ 0.1 (HC2) > * Use +1% for ADC value tolerance in the array below, the code > loops until > * the measured ADC value is lower than then ADCmax from the array. > */ > @@ -39,7 +40,8 @@ struct odroid_rev_info odroid_info[] = { > { EXYNOS5_BOARD_ODROID_XU3_REV01, 1, 10, "xu3" }, > { EXYNOS5_BOARD_ODROID_XU3_REV02, 2, 375, "xu3" }, > { EXYNOS5_BOARD_ODROID_XU4_REV01, 1, 1293, "xu4" }, > - { EXYNOS5_BOARD_ODROID_HC1_REV01, 1, 1321, "hc1" }, > + { EXYNOS5_BOARD_ODROID_HC1_REV01, 1, 1322, "hc1" }, > + { EXYNOS5_BOARD_ODROID_HC2_REV01, 1, 1484, "hc1" }, > { EXYNOS5_BOARD_ODROID_UNKNOWN, 0, 4095, "unknown" }, > }; > > @@ -144,6 +146,14 @@ bool board_is_odroidhc1(void) > return false; > } > > +bool board_is_odroidhc2(void) > +{ > + if (gd->board_type == EXYNOS5_BOARD_ODROID_HC2_REV01) > + return true; > + > + return false; > +} > + > bool board_is_generic(void) > { > if (gd->board_type == EXYNOS5_BOARD_GENERIC) > diff --git a/board/samsung/common/exynos5-dt.c > b/board/samsung/common/exynos5-dt.c index 8c3a9ea564..c183965b92 > 100644 --- a/board/samsung/common/exynos5-dt.c > +++ b/board/samsung/common/exynos5-dt.c > @@ -179,7 +179,7 @@ char *get_dfu_alt_system(char *interface, char > *devstr) { > char *info = "Not supported!"; > > - if (board_is_odroidxu4() || board_is_odroidhc1()) > + if (board_is_odroidxu4() || board_is_odroidhc1() || > board_is_odroidhc2()) return info; > > return env_get("dfu_alt_system"); > @@ -192,7 +192,7 @@ char *get_dfu_alt_boot(char *interface, char > *devstr) char *alt_boot; > int dev_num; > > - if (board_is_odroidxu4() || board_is_odroidhc1()) > + if (board_is_odroidxu4() || board_is_odroidhc1() || > board_is_odroidhc2()) return info; > > dev_num = simple_strtoul(devstr, NULL, 10); > diff --git a/configs/odroid-xu3_defconfig > b/configs/odroid-xu3_defconfig index 258b9781cc..d5c7cc7129 100644 > --- a/configs/odroid-xu3_defconfig > +++ b/configs/odroid-xu3_defconfig > @@ -2,7 +2,7 @@ CONFIG_ARM=y > CONFIG_ARCH_EXYNOS=y > CONFIG_SYS_TEXT_BASE=0x43E00000 > CONFIG_ARCH_EXYNOS5=y > -CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1" > +CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1/HC2" > CONFIG_DISTRO_DEFAULTS=y > CONFIG_NR_DRAM_BANKS=8 > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > diff --git a/include/samsung/exynos5-dt-types.h > b/include/samsung/exynos5-dt-types.h index 8e11af30d1..8fe08fe211 > 100644 --- a/include/samsung/exynos5-dt-types.h > +++ b/include/samsung/exynos5-dt-types.h > @@ -9,6 +9,7 @@ enum { > EXYNOS5_BOARD_ODROID_XU3_REV02, > EXYNOS5_BOARD_ODROID_XU4_REV01, > EXYNOS5_BOARD_ODROID_HC1_REV01, > + EXYNOS5_BOARD_ODROID_HC2_REV01, > EXYNOS5_BOARD_ODROID_UNKNOWN, > > EXYNOS5_BOARD_COUNT, > @@ -25,5 +26,6 @@ bool board_is_generic(void); > bool board_is_odroidxu3(void); > bool board_is_odroidxu4(void); > bool board_is_odroidhc1(void); > +bool board_is_odroidhc2(void); > > #endif > -- > 2.17.1 > > Reviewed-by: Lukasz Majewski <lukma@denx.de> Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181015/999024c1/attachment.sig> ^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC2 support 2018-10-15 14:19 ` Lukasz Majewski @ 2018-10-17 6:26 ` Minkyu Kang 2018-10-18 18:44 ` Dirk Meul 0 siblings, 1 reply; 6+ messages in thread From: Minkyu Kang @ 2018-10-17 6:26 UTC (permalink / raw) To: u-boot Dear Dirk Meul, On 15/10/18 23:19, Lukasz Majewski wrote: > Hi Dirk, > >> Odroid HC2 board is based on Odroid XU4 board, like the Odroid HC1. >> >> The linux kernel does not provide a hc2 DTB so the hc1 DTB is also >> used for the Odroid HC2. >> >> Signed-off-by: Dirk Meul <dirk.meul@rwth-aachen.de> >> --- >> board/samsung/common/exynos5-dt-types.c | 16 +++++++++++++--- >> board/samsung/common/exynos5-dt.c | 4 ++-- >> configs/odroid-xu3_defconfig | 2 +- >> include/samsung/exynos5-dt-types.h | 2 ++ >> 4 files changed, 18 insertions(+), 6 deletions(-) >> I failed to apply your patch. Could you please check and resend? checking file board/samsung/common/exynos5-dt-types.c Hunk #2 FAILED at 40. Hunk #3 succeeded at 145 with fuzz 1. 1 out of 3 hunks FAILED checking file board/samsung/common/exynos5-dt.c Hunk #1 FAILED at 179. Hunk #2 FAILED at 192. 2 out of 2 hunks FAILED checking file configs/odroid-xu3_defconfig checking file include/samsung/exynos5-dt-types.h Hunk #1 FAILED at 9. 1 out of 2 hunks FAILED Thanks, Minkyu Kang. ^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC2 support 2018-10-17 6:26 ` Minkyu Kang @ 2018-10-18 18:44 ` Dirk Meul 2018-10-22 10:16 ` Minkyu Kang 0 siblings, 1 reply; 6+ messages in thread From: Dirk Meul @ 2018-10-18 18:44 UTC (permalink / raw) To: u-boot Odroid HC2 board is based on Odroid XU4 board, like the Odroid HC1. The linux kernel does not provide a hc2 DTB so the hc1 DTB is also used for the Odroid HC2. Signed-off-by: Dirk Meul <dirk.meul@rwth-aachen.de> --- board/samsung/common/exynos5-dt-types.c | 16 +++++++++++++--- board/samsung/common/exynos5-dt.c | 4 ++-- configs/odroid-xu3_defconfig | 2 +- include/samsung/exynos5-dt-types.h | 2 ++ 4 files changed, 18 insertions(+), 6 deletions(-) diff --git a/board/samsung/common/exynos5-dt-types.c b/board/samsung/common/exynos5-dt-types.c index 4473968db6..7a86e91877 100644 --- a/board/samsung/common/exynos5-dt-types.c +++ b/board/samsung/common/exynos5-dt-types.c @@ -24,14 +24,15 @@ static const struct udevice_id board_ids[] = { }; /** - * Odroix XU3/XU4/HC1 board revisions (from HC1_MAIN_REV0.1_20170630.pdf): + * Odroix XU3/XU4/HC1/HC2 board revisions (from HC1+_HC2_MAIN_REV0.1_20171017.pdf): * Rev ADCmax Board * 0.1 0 XU3 0.1 * 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT (probe I2C0:0x40 / INA231) * 0.3 1280 XU4 0.1 * 0.4 739 XU4 0.2 * 0.5 1016 XU4+Air0.1 (Passive cooling) - * 0.6 1308 XU4S 0.1 (HC1) + * 0.6 1309 XU4-HC1 0.1 + * 0.7 1470 XU4-HC1+ 0.1 (HC2) * Use +1% for ADC value tolerance in the array below, the code loops until * the measured ADC value is lower than then ADCmax from the array. */ @@ -39,7 +40,8 @@ struct odroid_rev_info odroid_info[] = { { EXYNOS5_BOARD_ODROID_XU3_REV01, 1, 10, "xu3" }, { EXYNOS5_BOARD_ODROID_XU3_REV02, 2, 375, "xu3" }, { EXYNOS5_BOARD_ODROID_XU4_REV01, 1, 1293, "xu4" }, - { EXYNOS5_BOARD_ODROID_HC1_REV01, 1, 1321, "hc1" }, + { EXYNOS5_BOARD_ODROID_HC1_REV01, 1, 1322, "hc1" }, + { EXYNOS5_BOARD_ODROID_HC2_REV01, 1, 1484, "hc1" }, { EXYNOS5_BOARD_ODROID_UNKNOWN, 0, 4095, "unknown" }, }; @@ -144,6 +146,14 @@ bool board_is_odroidhc1(void) return false; } +bool board_is_odroidhc2(void) +{ + if (gd->board_type == EXYNOS5_BOARD_ODROID_HC2_REV01) + return true; + + return false; +} + bool board_is_generic(void) { if (gd->board_type == EXYNOS5_BOARD_GENERIC) diff --git a/board/samsung/common/exynos5-dt.c b/board/samsung/common/exynos5-dt.c index 8c3a9ea564..c183965b92 100644 --- a/board/samsung/common/exynos5-dt.c +++ b/board/samsung/common/exynos5-dt.c @@ -179,7 +179,7 @@ char *get_dfu_alt_system(char *interface, char *devstr) { char *info = "Not supported!"; - if (board_is_odroidxu4() || board_is_odroidhc1()) + if (board_is_odroidxu4() || board_is_odroidhc1() || board_is_odroidhc2()) return info; return env_get("dfu_alt_system"); @@ -192,7 +192,7 @@ char *get_dfu_alt_boot(char *interface, char *devstr) char *alt_boot; int dev_num; - if (board_is_odroidxu4() || board_is_odroidhc1()) + if (board_is_odroidxu4() || board_is_odroidhc1() || board_is_odroidhc2()) return info; dev_num = simple_strtoul(devstr, NULL, 10); diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig index 258b9781cc..d5c7cc7129 100644 --- a/configs/odroid-xu3_defconfig +++ b/configs/odroid-xu3_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_SYS_TEXT_BASE=0x43E00000 CONFIG_ARCH_EXYNOS5=y -CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1" +CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1/HC2" CONFIG_DISTRO_DEFAULTS=y CONFIG_NR_DRAM_BANKS=8 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/include/samsung/exynos5-dt-types.h b/include/samsung/exynos5-dt-types.h index 8e11af30d1..8fe08fe211 100644 --- a/include/samsung/exynos5-dt-types.h +++ b/include/samsung/exynos5-dt-types.h @@ -9,6 +9,7 @@ enum { EXYNOS5_BOARD_ODROID_XU3_REV02, EXYNOS5_BOARD_ODROID_XU4_REV01, EXYNOS5_BOARD_ODROID_HC1_REV01, + EXYNOS5_BOARD_ODROID_HC2_REV01, EXYNOS5_BOARD_ODROID_UNKNOWN, EXYNOS5_BOARD_COUNT, @@ -25,5 +26,6 @@ bool board_is_generic(void); bool board_is_odroidxu3(void); bool board_is_odroidxu4(void); bool board_is_odroidhc1(void); +bool board_is_odroidhc2(void); #endif -- 2.17.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC2 support 2018-10-18 18:44 ` Dirk Meul @ 2018-10-22 10:16 ` Minkyu Kang 0 siblings, 0 replies; 6+ messages in thread From: Minkyu Kang @ 2018-10-22 10:16 UTC (permalink / raw) To: u-boot Dear Dirk Meul, On 19/10/18 03:44, Dirk Meul wrote: > Odroid HC2 board is based on Odroid XU4 board, like the Odroid HC1. > > The linux kernel does not provide a hc2 DTB so the hc1 DTB is also used > for the Odroid HC2. > > Signed-off-by: Dirk Meul <dirk.meul@rwth-aachen.de> > --- > board/samsung/common/exynos5-dt-types.c | 16 +++++++++++++--- > board/samsung/common/exynos5-dt.c | 4 ++-- > configs/odroid-xu3_defconfig | 2 +- > include/samsung/exynos5-dt-types.h | 2 ++ > 4 files changed, 18 insertions(+), 6 deletions(-) > Please send a v2 patch. Thanks, Minkyu Kang. ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-10-22 10:16 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CGME20181014164954epcas3p4ca9cc783b64a38d286f54a08b67fafdd@epcas3p4.samsung.com>
2018-10-14 16:49 ` [U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC2 support Meul, Dirk
2018-10-15 7:44 ` Marek Szyprowski
2018-10-15 14:19 ` Lukasz Majewski
2018-10-17 6:26 ` Minkyu Kang
2018-10-18 18:44 ` Dirk Meul
2018-10-22 10:16 ` Minkyu Kang
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox