* [U-Boot] [PATCH] configs: am3517_evm: Use default OMAP3 memory settings
@ 2018-10-21 15:34 Adam Ford
2018-11-17 13:32 ` [U-Boot] " Tom Rini
0 siblings, 1 reply; 2+ messages in thread
From: Adam Ford @ 2018-10-21 15:34 UTC (permalink / raw)
To: u-boot
The AM3517 is mostly am omap3, so this partch removes the custom
memory configurations and just uses the default common entries
for omap3 and armv7.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 0463e42048..4e7e5209d4 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -12,16 +12,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-/*
- * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 0x800FFFC0--0x80100000 should not be used for any
- * other needs.
- */
-
-#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
-
#include <configs/ti_omap3_common.h>
#undef CONFIG_DM_I2C_COMPAT
@@ -176,8 +166,6 @@
/* Physical Memory Map */
#define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024)
-#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE 0x800
/* FLASH and environment organization */
@@ -203,10 +191,6 @@
#undef CONFIG_SPL_TEXT_BASE
#define CONFIG_SPL_TEXT_BASE 0x40200000
-#undef CONFIG_SPL_BSS_START_ADDR
-#define CONFIG_SPL_BSS_START_ADDR 0x80000000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
-
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
--
2.17.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-11-17 13:32 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-10-21 15:34 [U-Boot] [PATCH] configs: am3517_evm: Use default OMAP3 memory settings Adam Ford
2018-11-17 13:32 ` [U-Boot] " Tom Rini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox