[U-Boot] [PATCH v3 0/7] ACPI: Generate SPCR table

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

This is a series to enable SPCR table generation in U-Boot.

This table is useful to get early console in Linux for debugging purposes.
The benefit of using it is not only for x86, but also for arm64 community
(actually they introduced support in Linux kernel).

This implementation has been tested on Intel Edison with enabled ACPI support.

Known issue(s):
 - if the serial parameters are changed at run time, SPCR is not regenerated,
   thus, might not produce what user excepts
   (this is more likely design issue of U-Boot itself)

Changelog v3:
- addressed Simon's and Alexander's comments
- fix most known issues

Changelog v2:
- drop WIP state
- test on most recent U-Boot and Linux kernel

Andy Shevchenko (7):
  dm: serial: Add ->getconfig() callback
  dm: serial: Introduce ->getinfo() callback
  serial: ns16550: Group reg_* members of ns16550_platdata
  serial: ns16550: Read reg-io-width from device tree
  serial: ns16550: Provide ->getinfo() implementation
  x86: acpi: Add SPCR table description
  x86: acpi: Generate SPCR table

 arch/x86/include/asm/acpi_table.h |  51 +++++++++++++
 arch/x86/lib/acpi_table.c         | 118 ++++++++++++++++++++++++++++++
 drivers/serial/ns16550.c          |  21 ++++++
 drivers/serial/sandbox.c          |  34 +++++++++
 drivers/serial/serial-uclass.c    |  37 ++++++++++
 include/common.h                  |   4 +
 include/ns16550.h                 |   4 +-
 include/serial.h                  |  66 ++++++++++++++++-
 test/dm/serial.c                  |  12 +++
 9 files changed, 343 insertions(+), 4 deletions(-)

--
2.19.1