* [U-Boot] [PATCH 1/3] configs: kirkwood: Convert Allied Telesis boards to DM_SPI
@ 2018-11-21 9:22 Chris Packham
2018-11-21 9:22 ` [U-Boot] [PATCH 2/3] configs: kirkwood: ds109: Convert " Chris Packham
` (3 more replies)
0 siblings, 4 replies; 9+ messages in thread
From: Chris Packham @ 2018-11-21 9:22 UTC (permalink / raw)
To: u-boot
Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
---
configs/SBx81LIFKW_defconfig | 2 ++
configs/SBx81LIFXCAT_defconfig | 2 ++
2 files changed, 4 insertions(+)
diff --git a/configs/SBx81LIFKW_defconfig b/configs/SBx81LIFKW_defconfig
index 99526c185e20..e0ce1595c5ee 100644
--- a/configs/SBx81LIFKW_defconfig
+++ b/configs/SBx81LIFKW_defconfig
@@ -28,6 +28,7 @@ CONFIG_SYS_I2C_MVTWSI=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
# CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
@@ -40,4 +41,5 @@ CONFIG_MII=y
CONFIG_DM_RTC=y
CONFIG_RTC_MV=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_KIRKWOOD_SPI=y
diff --git a/configs/SBx81LIFXCAT_defconfig b/configs/SBx81LIFXCAT_defconfig
index a0abe23ed328..4a6e05844fec 100644
--- a/configs/SBx81LIFXCAT_defconfig
+++ b/configs/SBx81LIFXCAT_defconfig
@@ -32,6 +32,7 @@ CONFIG_I2C_MUX_PCA954x=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
# CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
@@ -42,4 +43,5 @@ CONFIG_MV88E61XX_PHY_PORTS=0x003
CONFIG_MV88E61XX_FIXED_PORTS=0x300
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_KIRKWOOD_SPI=y
--
2.19.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [U-Boot] [PATCH 2/3] configs: kirkwood: ds109: Convert to DM_SPI
2018-11-21 9:22 [U-Boot] [PATCH 1/3] configs: kirkwood: Convert Allied Telesis boards to DM_SPI Chris Packham
@ 2018-11-21 9:22 ` Chris Packham
2018-11-22 8:37 ` Stefan Roese
2018-11-30 14:39 ` Stefan Roese
2018-11-21 9:22 ` [U-Boot] [PATCH 3/3] configs: kirkwood: dreamplug: " Chris Packham
` (2 subsequent siblings)
3 siblings, 2 replies; 9+ messages in thread
From: Chris Packham @ 2018-11-21 9:22 UTC (permalink / raw)
To: u-boot
Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
---
configs/ds109_defconfig | 2 ++
include/configs/ds109.h | 1 -
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/configs/ds109_defconfig b/configs/ds109_defconfig
index 23f1886a249a..352403e57385 100644
--- a/configs/ds109_defconfig
+++ b/configs/ds109_defconfig
@@ -23,6 +23,7 @@ CONFIG_MVSATA_IDE=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
# CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_STMICRO=y
@@ -32,6 +33,7 @@ CONFIG_DM_RTC=y
CONFIG_RTC_MV=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_KIRKWOOD_SPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
diff --git a/include/configs/ds109.h b/include/configs/ds109.h
index c06f0058deb5..2c7928e88c1c 100644
--- a/include/configs/ds109.h
+++ b/include/configs/ds109.h
@@ -38,7 +38,6 @@
#endif
#ifdef CONFIG_CMD_SF
-#define CONFIG_HARD_SPI 1
#define CONFIG_ENV_SPI_BUS 0
#define CONFIG_ENV_SPI_CS 0
#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
--
2.19.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [U-Boot] [PATCH 2/3] configs: kirkwood: ds109: Convert to DM_SPI
2018-11-21 9:22 ` [U-Boot] [PATCH 2/3] configs: kirkwood: ds109: Convert " Chris Packham
@ 2018-11-22 8:37 ` Stefan Roese
2018-11-30 14:39 ` Stefan Roese
1 sibling, 0 replies; 9+ messages in thread
From: Stefan Roese @ 2018-11-22 8:37 UTC (permalink / raw)
To: u-boot
On 21.11.18 10:22, Chris Packham wrote:
> Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.
>
> Signed-off-by: Chris Packham <judge.packham@gmail.com>
> ---
>
> configs/ds109_defconfig | 2 ++
> include/configs/ds109.h | 1 -
> 2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/configs/ds109_defconfig b/configs/ds109_defconfig
> index 23f1886a249a..352403e57385 100644
> --- a/configs/ds109_defconfig
> +++ b/configs/ds109_defconfig
> @@ -23,6 +23,7 @@ CONFIG_MVSATA_IDE=y
> CONFIG_DM_I2C=y
> CONFIG_SYS_I2C_MVTWSI=y
> # CONFIG_MMC is not set
> +CONFIG_DM_SPI_FLASH=y
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_BAR=y
> CONFIG_SPI_FLASH_STMICRO=y
> @@ -32,6 +33,7 @@ CONFIG_DM_RTC=y
> CONFIG_RTC_MV=y
> CONFIG_SYS_NS16550=y
> CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> CONFIG_KIRKWOOD_SPI=y
> CONFIG_USB=y
> CONFIG_USB_EHCI_HCD=y
> diff --git a/include/configs/ds109.h b/include/configs/ds109.h
> index c06f0058deb5..2c7928e88c1c 100644
> --- a/include/configs/ds109.h
> +++ b/include/configs/ds109.h
> @@ -38,7 +38,6 @@
> #endif
>
> #ifdef CONFIG_CMD_SF
> -#define CONFIG_HARD_SPI 1
> #define CONFIG_ENV_SPI_BUS 0
> #define CONFIG_ENV_SPI_CS 0
> #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
>
Reviewed-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH 2/3] configs: kirkwood: ds109: Convert to DM_SPI
2018-11-21 9:22 ` [U-Boot] [PATCH 2/3] configs: kirkwood: ds109: Convert " Chris Packham
2018-11-22 8:37 ` Stefan Roese
@ 2018-11-30 14:39 ` Stefan Roese
1 sibling, 0 replies; 9+ messages in thread
From: Stefan Roese @ 2018-11-30 14:39 UTC (permalink / raw)
To: u-boot
On 21.11.18 10:22, Chris Packham wrote:
> Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.
>
> Signed-off-by: Chris Packham <judge.packham@gmail.com>
Applied to u-boot-marvell/master.
Thanks,
Stefan
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH 3/3] configs: kirkwood: dreamplug: Convert to DM_SPI
2018-11-21 9:22 [U-Boot] [PATCH 1/3] configs: kirkwood: Convert Allied Telesis boards to DM_SPI Chris Packham
2018-11-21 9:22 ` [U-Boot] [PATCH 2/3] configs: kirkwood: ds109: Convert " Chris Packham
@ 2018-11-21 9:22 ` Chris Packham
2018-11-22 8:38 ` Stefan Roese
2018-11-30 14:39 ` Stefan Roese
2018-11-22 8:37 ` [U-Boot] [PATCH 1/3] configs: kirkwood: Convert Allied Telesis boards " Stefan Roese
2018-11-30 14:38 ` Stefan Roese
3 siblings, 2 replies; 9+ messages in thread
From: Chris Packham @ 2018-11-21 9:22 UTC (permalink / raw)
To: u-boot
Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
---
configs/dreamplug_defconfig | 2 ++
include/configs/dreamplug.h | 1 -
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig
index 76c768006d35..d3263cf9cd3f 100644
--- a/configs/dreamplug_defconfig
+++ b/configs/dreamplug_defconfig
@@ -26,6 +26,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_DM=y
CONFIG_MVSATA_IDE=y
# CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_MVGBE=y
@@ -34,6 +35,7 @@ CONFIG_DM_RTC=y
CONFIG_RTC_MV=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_KIRKWOOD_SPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h
index 1c94bf9fa1bf..f4d717213ce1 100644
--- a/include/configs/dreamplug.h
+++ b/include/configs/dreamplug.h
@@ -35,7 +35,6 @@
#endif
#ifdef CONFIG_CMD_SF
-#define CONFIG_HARD_SPI 1
#define CONFIG_ENV_SPI_BUS 0
#define CONFIG_ENV_SPI_CS 0
#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
--
2.19.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH 3/3] configs: kirkwood: dreamplug: Convert to DM_SPI
2018-11-21 9:22 ` [U-Boot] [PATCH 3/3] configs: kirkwood: dreamplug: " Chris Packham
@ 2018-11-22 8:38 ` Stefan Roese
2018-11-30 14:39 ` Stefan Roese
1 sibling, 0 replies; 9+ messages in thread
From: Stefan Roese @ 2018-11-22 8:38 UTC (permalink / raw)
To: u-boot
On 21.11.18 10:22, Chris Packham wrote:
> Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.
>
> Signed-off-by: Chris Packham <judge.packham@gmail.com>
> ---
>
> configs/dreamplug_defconfig | 2 ++
> include/configs/dreamplug.h | 1 -
> 2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig
> index 76c768006d35..d3263cf9cd3f 100644
> --- a/configs/dreamplug_defconfig
> +++ b/configs/dreamplug_defconfig
> @@ -26,6 +26,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
> CONFIG_DM=y
> CONFIG_MVSATA_IDE=y
> # CONFIG_MMC is not set
> +CONFIG_DM_SPI_FLASH=y
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_MACRONIX=y
> CONFIG_MVGBE=y
> @@ -34,6 +35,7 @@ CONFIG_DM_RTC=y
> CONFIG_RTC_MV=y
> CONFIG_SYS_NS16550=y
> CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> CONFIG_KIRKWOOD_SPI=y
> CONFIG_USB=y
> CONFIG_USB_EHCI_HCD=y
> diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h
> index 1c94bf9fa1bf..f4d717213ce1 100644
> --- a/include/configs/dreamplug.h
> +++ b/include/configs/dreamplug.h
> @@ -35,7 +35,6 @@
> #endif
>
> #ifdef CONFIG_CMD_SF
> -#define CONFIG_HARD_SPI 1
> #define CONFIG_ENV_SPI_BUS 0
> #define CONFIG_ENV_SPI_CS 0
> #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
>
Reviewed-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH 3/3] configs: kirkwood: dreamplug: Convert to DM_SPI
2018-11-21 9:22 ` [U-Boot] [PATCH 3/3] configs: kirkwood: dreamplug: " Chris Packham
2018-11-22 8:38 ` Stefan Roese
@ 2018-11-30 14:39 ` Stefan Roese
1 sibling, 0 replies; 9+ messages in thread
From: Stefan Roese @ 2018-11-30 14:39 UTC (permalink / raw)
To: u-boot
On 21.11.18 10:22, Chris Packham wrote:
> Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.
>
> Signed-off-by: Chris Packham <judge.packham@gmail.com>
Applied to u-boot-marvell/master.
Thanks,
Stefan
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH 1/3] configs: kirkwood: Convert Allied Telesis boards to DM_SPI
2018-11-21 9:22 [U-Boot] [PATCH 1/3] configs: kirkwood: Convert Allied Telesis boards to DM_SPI Chris Packham
2018-11-21 9:22 ` [U-Boot] [PATCH 2/3] configs: kirkwood: ds109: Convert " Chris Packham
2018-11-21 9:22 ` [U-Boot] [PATCH 3/3] configs: kirkwood: dreamplug: " Chris Packham
@ 2018-11-22 8:37 ` Stefan Roese
2018-11-30 14:38 ` Stefan Roese
3 siblings, 0 replies; 9+ messages in thread
From: Stefan Roese @ 2018-11-22 8:37 UTC (permalink / raw)
To: u-boot
On 21.11.18 10:22, Chris Packham wrote:
> Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.
>
> Signed-off-by: Chris Packham <judge.packham@gmail.com>
> ---
>
> configs/SBx81LIFKW_defconfig | 2 ++
> configs/SBx81LIFXCAT_defconfig | 2 ++
> 2 files changed, 4 insertions(+)
>
> diff --git a/configs/SBx81LIFKW_defconfig b/configs/SBx81LIFKW_defconfig
> index 99526c185e20..e0ce1595c5ee 100644
> --- a/configs/SBx81LIFKW_defconfig
> +++ b/configs/SBx81LIFKW_defconfig
> @@ -28,6 +28,7 @@ CONFIG_SYS_I2C_MVTWSI=y
> CONFIG_I2C_MUX=y
> CONFIG_I2C_MUX_PCA954x=y
> # CONFIG_MMC is not set
> +CONFIG_DM_SPI_FLASH=y
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_STMICRO=y
> # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
> @@ -40,4 +41,5 @@ CONFIG_MII=y
> CONFIG_DM_RTC=y
> CONFIG_RTC_MV=y
> CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> CONFIG_KIRKWOOD_SPI=y
> diff --git a/configs/SBx81LIFXCAT_defconfig b/configs/SBx81LIFXCAT_defconfig
> index a0abe23ed328..4a6e05844fec 100644
> --- a/configs/SBx81LIFXCAT_defconfig
> +++ b/configs/SBx81LIFXCAT_defconfig
> @@ -32,6 +32,7 @@ CONFIG_I2C_MUX_PCA954x=y
> CONFIG_LED=y
> CONFIG_LED_GPIO=y
> # CONFIG_MMC is not set
> +CONFIG_DM_SPI_FLASH=y
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_STMICRO=y
> # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
> @@ -42,4 +43,5 @@ CONFIG_MV88E61XX_PHY_PORTS=0x003
> CONFIG_MV88E61XX_FIXED_PORTS=0x300
> CONFIG_MII=y
> CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> CONFIG_KIRKWOOD_SPI=y
>
Reviewed-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH 1/3] configs: kirkwood: Convert Allied Telesis boards to DM_SPI
2018-11-21 9:22 [U-Boot] [PATCH 1/3] configs: kirkwood: Convert Allied Telesis boards to DM_SPI Chris Packham
` (2 preceding siblings ...)
2018-11-22 8:37 ` [U-Boot] [PATCH 1/3] configs: kirkwood: Convert Allied Telesis boards " Stefan Roese
@ 2018-11-30 14:38 ` Stefan Roese
3 siblings, 0 replies; 9+ messages in thread
From: Stefan Roese @ 2018-11-30 14:38 UTC (permalink / raw)
To: u-boot
On 21.11.18 10:22, Chris Packham wrote:
> Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.
>
> Signed-off-by: Chris Packham <judge.packham@gmail.com>
Applied to u-boot-marvell/master.
Thanks,
Stefan
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2018-11-30 14:39 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-11-21 9:22 [U-Boot] [PATCH 1/3] configs: kirkwood: Convert Allied Telesis boards to DM_SPI Chris Packham
2018-11-21 9:22 ` [U-Boot] [PATCH 2/3] configs: kirkwood: ds109: Convert " Chris Packham
2018-11-22 8:37 ` Stefan Roese
2018-11-30 14:39 ` Stefan Roese
2018-11-21 9:22 ` [U-Boot] [PATCH 3/3] configs: kirkwood: dreamplug: " Chris Packham
2018-11-22 8:38 ` Stefan Roese
2018-11-30 14:39 ` Stefan Roese
2018-11-22 8:37 ` [U-Boot] [PATCH 1/3] configs: kirkwood: Convert Allied Telesis boards " Stefan Roese
2018-11-30 14:38 ` Stefan Roese
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox