From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 09/32] spi: mpc8xxx: Replace defines with enums
Date: Sun, 25 Nov 2018 22:58:30 +0530 [thread overview]
Message-ID: <20181125172853.20491-10-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20181125172853.20491-1-jagan@amarulasolutions.com>
From: Mario Six <mario.six@gdsys.cc>
Replace pre-processor defines with proper enums, and use the BIT macro
where applicable.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
---
drivers/spi/mpc8xxx_spi.c | 26 +++++++++++++++++++-------
1 file changed, 19 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c
index 91b639f1e6..7b2ab1e4af 100644
--- a/drivers/spi/mpc8xxx_spi.c
+++ b/drivers/spi/mpc8xxx_spi.c
@@ -10,13 +10,25 @@
#include <spi.h>
#include <asm/mpc8xxx_spi.h>
-#define SPI_EV_NE (0x80000000 >> 22) /* Receiver Not Empty */
-#define SPI_EV_NF (0x80000000 >> 23) /* Transmitter Not Full */
-
-#define SPI_MODE_LOOP (0x80000000 >> 1) /* Loopback mode */
-#define SPI_MODE_REV (0x80000000 >> 5) /* Reverse mode - MSB first */
-#define SPI_MODE_MS (0x80000000 >> 6) /* Always master */
-#define SPI_MODE_EN (0x80000000 >> 7) /* Enable interface */
+enum {
+ SPI_EV_NE = BIT(31 - 22), /* Receiver Not Empty */
+ SPI_EV_NF = BIT(31 - 23), /* Transmitter Not Full */
+};
+
+enum {
+ SPI_MODE_LOOP = BIT(31 - 1), /* Loopback mode */
+ SPI_MODE_CI = BIT(31 - 2), /* Clock invert */
+ SPI_MODE_CP = BIT(31 - 3), /* Clock phase */
+ SPI_MODE_DIV16 = BIT(31 - 4), /* Divide clock source by 16 */
+ SPI_MODE_REV = BIT(31 - 5), /* Reverse mode - MSB first */
+ SPI_MODE_MS = BIT(31 - 6), /* Always master */
+ SPI_MODE_EN = BIT(31 - 7), /* Enable interface */
+
+ SPI_MODE_LEN_MASK = 0xf00000,
+ SPI_MODE_PM_MASK = 0xf0000,
+
+ SPI_COM_LST = BIT(31 - 9),
+};
#define SPI_TIMEOUT 1000
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2018-11-25 17:28 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-25 17:28 [U-Boot] [PATCH v2 00/32] spi: DM_SPI migration timeout, remainder(2) Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 01/32] spi: davinci: Full dm conversion Jagan Teki
2018-11-26 13:32 ` Adam Ford
2018-11-26 18:19 ` Jagan Teki
2018-11-26 19:12 ` Adam Ford
2018-11-25 17:28 ` [U-Boot] [PATCH v2 02/32] spi: kirkwood: " Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 03/32] spi: ti_qspi: " Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 04/32] spi: mpc8xxx: Use short type names Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 05/32] spi: mpc8xxx: Fix comments Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 06/32] spi: mpc8xxx: Rename camel-case variables Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 07/32] spi: mpc8xxx: Fix space after cast Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 08/32] spi: mpc8xxx: Fix function names in strings Jagan Teki
2018-11-25 17:28 ` Jagan Teki [this message]
2018-11-25 17:28 ` [U-Boot] [PATCH v2 10/32] spi: mpc8xxx: Use IO accessors Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 11/32] spi: mpc8xxx: Simplify if Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 12/32] spi: mpc8xxx: Get rid of is_read Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 13/32] spi: mpc8xxx: Simplify logic a bit Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 14/32] spi: mpc8xxx: Reduce scope of loop variables Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 15/32] spi: mpc8xxx: Make code more readable Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 16/32] spi: mpc8xxx: Rename variable Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 17/32] spi: mpc8xxx: Document LEN setting better Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 18/32] spi: mpc8xxx: Re-order transfer setup Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 19/32] spi: mpc8xxx: Fix if check Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 20/32] spi: mpc8xxx: Use get_timer Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 21/32] spi: mpc8xxx: Convert to DM Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 22/32] spi: Zap cf_spi driver-related code Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 23/32] spi: Zap lpc32xx_ssp " Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 24/32] spi: Zap mxs_spi " Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 25/32] spi: Zap sh_spi " Jagan Teki
2018-11-25 18:06 ` Marek Vasut
2018-11-27 6:05 ` Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 26/32] spi: Zap soft_spi_legacy " Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 27/32] spi: mxc: Drop non-dm code Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 28/32] spi: omap3: " Jagan Teki
2018-11-26 19:36 ` Adam Ford
2018-11-25 17:28 ` [U-Boot] [PATCH v2 29/32] spi: atmel: " Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 30/32] spi: Zap fsl_espi driver-related code Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 31/32] spi: fsl_dspi: Drop non-dm code Jagan Teki
2018-11-25 17:28 ` [U-Boot] [PATCH v2 32/32] dm: MIGRATION: spi: Update SPI driver status Jagan Teki
2018-12-11 1:03 ` Simon Glass
2018-11-26 7:18 ` [U-Boot] [PATCH v2 00/32] spi: DM_SPI migration timeout, remainder(2) Peng Fan
2018-11-27 5:51 ` Jagan Teki
2018-11-27 12:10 ` Marek Vasut
2018-11-28 4:24 ` Heiko Schocher
2018-11-28 4:36 ` Tom Rini
2018-11-27 14:39 ` Stefano Babic
2018-11-27 16:13 ` Tom Rini
2018-11-28 9:33 ` Stefano Babic
2018-11-28 14:59 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181125172853.20491-10-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox