[U-Boot] [PATCH v2 28/32] spi: omap3: Drop non-dm code

[Jagan Teki <jagan@amarulasolutions.com>]

Drop the non-dm code, those board which uses non-dm need
to define DM_SPI. u-boot build trigger the warning for
the same.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 Makefile                |   2 +-
 drivers/spi/Makefile    |   2 +-
 drivers/spi/omap3_spi.c | 126 ----------------------------------------
 3 files changed, 2 insertions(+), 128 deletions(-)

diff --git a/Makefile b/Makefile
index 3be3bb3118..00f0117b16 100644
--- a/Makefile
+++ b/Makefile
@@ -920,7 +920,7 @@ ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
 endif
 ifeq ($(CONFIG_DM_SPI),)
 ifeq ($(filter $(CONFIG_DAVINCI_SPI) $(CONFIG_KIRKWOOD_SPI) $(CONFIG_MPC8XXX_SPI) \
-	       $(CONFIG_MXC_SPI) $(CONFIG_TI_QSPI),y),y)
+	       $(CONFIG_MXC_SPI) $(CONFIG_OMAP3_SPI) $(CONFIG_TI_QSPI),y),y)
 	@echo "===================== WARNING ======================"
 	@echo "This board uses SPI driver from drivers/spi/ without"
 	@echo "enabling CONFIG_DM_SPI. Please enable CONFIG_DM_SPI"
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index c682b014e7..6b8b92434c 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o
 obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
 obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
 obj-$(CONFIG_MXC_SPI) += mxc_spi.o
+obj-$(CONFIG_OMAP3_SPI) += omap3_spi.o
 obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o
 obj-$(CONFIG_SOFT_SPI) += soft_spi.o
 obj-$(CONFIG_SPI_MEM) += spi-mem.o
@@ -35,7 +36,6 @@ obj-$(CONFIG_MPC8XX_SPI) += mpc8xx_spi.o
 obj-$(CONFIG_MT7621_SPI) += mt7621_spi.o
 obj-$(CONFIG_MVEBU_A3700_SPI) += mvebu_a3700_spi.o
 obj-$(CONFIG_ATCSPI200_SPI) += atcspi200_spi.o
-obj-$(CONFIG_OMAP3_SPI) += omap3_spi.o
 obj-$(CONFIG_PIC32_SPI) += pic32_spi.o
 obj-$(CONFIG_PL022_SPI) += pl022_spi.o
 obj-$(CONFIG_RENESAS_RPC_SPI) += renesas_rpc_spi.o
diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index c7fcf050a5..5e267d88d7 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -108,9 +108,6 @@ struct mcspi {
 };
 
 struct omap3_spi_priv {
-#ifndef CONFIG_DM_SPI
-	struct spi_slave slave;
-#endif
 	struct mcspi *regs;
 	unsigned int cs;
 	unsigned int freq;
@@ -454,128 +451,6 @@ static void _omap3_spi_claim_bus(struct omap3_spi_priv *priv)
 	writel(conf, &priv->regs->modulctrl);
 }
 
-#ifndef CONFIG_DM_SPI
-
-static inline struct omap3_spi_priv *to_omap3_spi(struct spi_slave *slave)
-{
-	return container_of(slave, struct omap3_spi_priv, slave);
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
-	struct omap3_spi_priv *priv = to_omap3_spi(slave);
-
-	free(priv);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
-	struct omap3_spi_priv *priv = to_omap3_spi(slave);
-
-	spi_reset(priv->regs);
-
-	_omap3_spi_claim_bus(priv);
-	_omap3_spi_set_wordlen(priv);
-	_omap3_spi_set_mode(priv);
-	_omap3_spi_set_speed(priv);
-
-	return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
-	struct omap3_spi_priv *priv = to_omap3_spi(slave);
-
-	writel(OMAP3_MCSPI_MODULCTRL_MS, &priv->regs->modulctrl);
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
-				     unsigned int max_hz, unsigned int mode)
-{
-	struct omap3_spi_priv *priv;
-	struct mcspi *regs;
-
-	/*
-	 * OMAP3 McSPI (MultiChannel SPI) has 4 busses (modules)
-	 * with different number of chip selects (CS, channels):
-	 * McSPI1 has 4 CS (bus 0, cs 0 - 3)
-	 * McSPI2 has 2 CS (bus 1, cs 0 - 1)
-	 * McSPI3 has 2 CS (bus 2, cs 0 - 1)
-	 * McSPI4 has 1 CS (bus 3, cs 0)
-	 */
-
-	switch (bus) {
-	case 0:
-		 regs = (struct mcspi *)OMAP3_MCSPI1_BASE;
-		 break;
-#ifdef OMAP3_MCSPI2_BASE
-	case 1:
-		 regs = (struct mcspi *)OMAP3_MCSPI2_BASE;
-		 break;
-#endif
-#ifdef OMAP3_MCSPI3_BASE
-	case 2:
-		 regs = (struct mcspi *)OMAP3_MCSPI3_BASE;
-		 break;
-#endif
-#ifdef OMAP3_MCSPI4_BASE
-	case 3:
-		 regs = (struct mcspi *)OMAP3_MCSPI4_BASE;
-		 break;
-#endif
-	default:
-		 printf("SPI error: unsupported bus %i.  Supported busses 0 - 3\n", bus);
-		 return NULL;
-	}
-
-	if (((bus == 0) && (cs > 3)) ||
-	    ((bus == 1) && (cs > 1)) ||
-	    ((bus == 2) && (cs > 1)) ||
-	    ((bus == 3) && (cs > 0))) {
-		printf("SPI error: unsupported chip select %i on bus %i\n", cs, bus);
-		return NULL;
-	}
-
-	if (max_hz > OMAP3_MCSPI_MAX_FREQ) {
-		printf("SPI error: unsupported frequency %i Hz. Max frequency is 48 MHz\n",
-		       max_hz);
-		return NULL;
-	}
-
-	if (mode > SPI_MODE_3) {
-		printf("SPI error: unsupported SPI mode %i\n", mode);
-		return NULL;
-	}
-
-	priv = spi_alloc_slave(struct omap3_spi_priv, bus, cs);
-	if (!priv) {
-		printf("SPI error: malloc of SPI structure failed\n");
-		return NULL;
-	}
-
-	priv->regs = regs;
-	priv->cs = cs;
-	priv->freq = max_hz;
-	priv->mode = mode;
-	priv->wordlen = priv->slave.wordlen;
-#if 0
-	/* Please migrate to DM_SPI support for this feature. */
-	priv->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN;
-#endif
-
-	return &priv->slave;
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
-	     const void *dout, void *din, unsigned long flags)
-{
-	struct omap3_spi_priv *priv = to_omap3_spi(slave);
-
-	return _spi_xfer(priv, bitlen, dout, din, flags);
-}
-
-#else
-
 static int omap3_spi_claim_bus(struct udevice *dev)
 {
 	struct udevice *bus = dev->parent;
@@ -700,4 +575,3 @@ U_BOOT_DRIVER(omap3_spi) = {
 	.ops    = &omap3_spi_ops,
 	.priv_auto_alloc_size = sizeof(struct omap3_spi_priv),
 };
-#endif
-- 
2.18.0.321.gffc6fa0e3