* [U-Boot] [GIT] Pull request: u-boot-dfu (13.12.2018)
@ 2018-12-12 22:58 Lukasz Majewski
2018-12-12 23:04 ` Marek Vasut
0 siblings, 1 reply; 6+ messages in thread
From: Lukasz Majewski @ 2018-12-12 22:58 UTC (permalink / raw)
To: u-boot
Dear Marek,
The following changes since commit 51b24944fdbfa760aa87a1ad812355e1df9c9355:
usb: musb: Remove legacy CONFIG_USB_DA8XX (2018-12-12 15:23:04 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-dfu.git
for you to fetch changes up to 8a3755462f65c032528af70c6582abf89f91b2bc:
configs: am335x_boneblack_vboot: enable DM_USB and RNDIS boot in SPl (2018-12-12 15:35:08 +0100)
----------------------------------------------------------------
Jean-Jacques Hiblot (20):
usb: dwc3-generic: make it compatible with "ti, keystone-dwc3"
board: ks2_evm: Enable the USB clocks if DM_USB is used
ARM: dts: k2g-evm: enable USB0 and USB1
PHY: Add phy driver for the keystone USB PHY
usb: host: replace xhci-keystone driver by the generic dwc3 driver
configs: k2g_evm: Enable DFU on K2G EVM
spl: drivers: Link usb common library to SPL if USB gadget is enabled
spl: net: dm: usb: bind the gadget before attempting to load the image
phy: omap_usb2: Add support for am437x
dwc3-generic: Add support for the am437x
board: ti: am43xx: turn on USB clocks
dts: Add a u-boot specific dtsi file for the am4372
dts: am4372: Enable USB1 in SPL
configs: am43xx_evm: Enable DM_USB and DM_USB_GADGET
configs: am43xx: Enable RNDIS support in SPL
usb: musb-new: Allow the diver not to use the set_phy_power() callback
usb: musb-new: Add support for DM_USB
arm: am33xx: Register USB controllers if DM_USB is used but not OF_CONTROL
configs: am335x_evm: Do not disable DM_USB in SPL
configs: am335x_boneblack_vboot: enable DM_USB and RNDIS boot in SPl
arch/arm/dts/am4372-generic-u-boot.dtsi | 2 +
arch/arm/dts/am4372-u-boot.dtsi | 40 ++++++++++++++++++
arch/arm/dts/am437x-gp-evm-u-boot.dtsi | 2 +
arch/arm/dts/am437x-idk-evm-u-boot.dtsi | 2 +
arch/arm/dts/am437x-sk-evm-u-boot.dtsi | 2 +
arch/arm/dts/keystone-k2g-evm.dts | 28 +++++++++++++
arch/arm/dts/keystone-k2g.dtsi | 56 +++++++++++++++++++++++++
arch/arm/include/asm/omap_musb.h | 8 ++++
arch/arm/mach-omap2/am33xx/board.c | 58 ++++++++++++++++++++++----
board/ti/am43xx/board.c | 22 ++++++++++
board/ti/ks2_evm/board.c | 12 ++++++
common/Makefile | 3 ++
common/spl/spl_net.c | 4 +-
configs/am335x_boneblack_vboot_defconfig | 10 +++++
configs/am43xx_evm_defconfig | 19 +++++++++
configs/k2e_evm_defconfig | 7 ++++
configs/k2e_hs_evm_defconfig | 7 ++++
configs/k2g_evm_defconfig | 12 ++++++
configs/k2g_hs_evm_defconfig | 12 ++++++
configs/k2hk_evm_defconfig | 7 ++++
configs/k2hk_hs_evm_defconfig | 7 ++++
configs/k2l_evm_defconfig | 7 ++++
configs/k2l_hs_evm_defconfig | 7 ++++
drivers/Makefile | 1 +
drivers/phy/Kconfig | 10 +++++
drivers/phy/Makefile | 1 +
drivers/phy/keystone-usb-phy.c | 109 +++++++++++++++++++++++++++++++++++++++++++++++++
drivers/phy/omap-usb2-phy.c | 45 +++++++++++++++-----
drivers/usb/dwc3/dwc3-generic.c | 2 +
drivers/usb/host/Makefile | 1 -
drivers/usb/host/xhci-keystone.c | 240 -----------------------------------------------------------------------------------------------------------
drivers/usb/musb-new/am35x.c | 8 ++--
drivers/usb/musb-new/musb_dsps.c | 8 ++--
drivers/usb/musb-new/musb_gadget.c | 11 +++++
drivers/usb/musb-new/musb_uboot.c | 4 +-
drivers/usb/musb-new/ti-musb.c | 181 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------
include/configs/am335x_evm.h | 1 -
include/configs/ti_armv7_keystone2.h | 17 +++++---
38 files changed, 649 insertions(+), 324 deletions(-)
create mode 100644 arch/arm/dts/am4372-u-boot.dtsi
create mode 100644 drivers/phy/keystone-usb-phy.c
delete mode 100644 drivers/usb/host/xhci-keystone.c
Travis-Ci: https://travis-ci.org/lmajewski/u-boot-dfu/builds/467026476
This is the last instalment of patches from Jean-Jacques
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181212/64773d41/attachment.sig>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [GIT] Pull request: u-boot-dfu (13.12.2018)
2018-12-12 22:58 [U-Boot] [GIT] Pull request: u-boot-dfu (13.12.2018) Lukasz Majewski
@ 2018-12-12 23:04 ` Marek Vasut
2018-12-13 8:13 ` Lukasz Majewski
0 siblings, 1 reply; 6+ messages in thread
From: Marek Vasut @ 2018-12-12 23:04 UTC (permalink / raw)
To: u-boot
On 12/12/2018 11:58 PM, Lukasz Majewski wrote:
> Dear Marek,
This looks quite heavy after RC1 . How thoroughly was this tested ?
> The following changes since commit 51b24944fdbfa760aa87a1ad812355e1df9c9355:
>
> usb: musb: Remove legacy CONFIG_USB_DA8XX (2018-12-12 15:23:04 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-dfu.git
>
> for you to fetch changes up to 8a3755462f65c032528af70c6582abf89f91b2bc:
>
> configs: am335x_boneblack_vboot: enable DM_USB and RNDIS boot in SPl (2018-12-12 15:35:08 +0100)
>
> ----------------------------------------------------------------
> Jean-Jacques Hiblot (20):
> usb: dwc3-generic: make it compatible with "ti, keystone-dwc3"
> board: ks2_evm: Enable the USB clocks if DM_USB is used
> ARM: dts: k2g-evm: enable USB0 and USB1
> PHY: Add phy driver for the keystone USB PHY
> usb: host: replace xhci-keystone driver by the generic dwc3 driver
> configs: k2g_evm: Enable DFU on K2G EVM
> spl: drivers: Link usb common library to SPL if USB gadget is enabled
> spl: net: dm: usb: bind the gadget before attempting to load the image
> phy: omap_usb2: Add support for am437x
> dwc3-generic: Add support for the am437x
> board: ti: am43xx: turn on USB clocks
> dts: Add a u-boot specific dtsi file for the am4372
> dts: am4372: Enable USB1 in SPL
> configs: am43xx_evm: Enable DM_USB and DM_USB_GADGET
> configs: am43xx: Enable RNDIS support in SPL
> usb: musb-new: Allow the diver not to use the set_phy_power() callback
> usb: musb-new: Add support for DM_USB
> arm: am33xx: Register USB controllers if DM_USB is used but not OF_CONTROL
> configs: am335x_evm: Do not disable DM_USB in SPL
> configs: am335x_boneblack_vboot: enable DM_USB and RNDIS boot in SPl
>
> arch/arm/dts/am4372-generic-u-boot.dtsi | 2 +
> arch/arm/dts/am4372-u-boot.dtsi | 40 ++++++++++++++++++
> arch/arm/dts/am437x-gp-evm-u-boot.dtsi | 2 +
> arch/arm/dts/am437x-idk-evm-u-boot.dtsi | 2 +
> arch/arm/dts/am437x-sk-evm-u-boot.dtsi | 2 +
> arch/arm/dts/keystone-k2g-evm.dts | 28 +++++++++++++
> arch/arm/dts/keystone-k2g.dtsi | 56 +++++++++++++++++++++++++
> arch/arm/include/asm/omap_musb.h | 8 ++++
> arch/arm/mach-omap2/am33xx/board.c | 58 ++++++++++++++++++++++----
> board/ti/am43xx/board.c | 22 ++++++++++
> board/ti/ks2_evm/board.c | 12 ++++++
> common/Makefile | 3 ++
> common/spl/spl_net.c | 4 +-
> configs/am335x_boneblack_vboot_defconfig | 10 +++++
> configs/am43xx_evm_defconfig | 19 +++++++++
> configs/k2e_evm_defconfig | 7 ++++
> configs/k2e_hs_evm_defconfig | 7 ++++
> configs/k2g_evm_defconfig | 12 ++++++
> configs/k2g_hs_evm_defconfig | 12 ++++++
> configs/k2hk_evm_defconfig | 7 ++++
> configs/k2hk_hs_evm_defconfig | 7 ++++
> configs/k2l_evm_defconfig | 7 ++++
> configs/k2l_hs_evm_defconfig | 7 ++++
> drivers/Makefile | 1 +
> drivers/phy/Kconfig | 10 +++++
> drivers/phy/Makefile | 1 +
> drivers/phy/keystone-usb-phy.c | 109 +++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/phy/omap-usb2-phy.c | 45 +++++++++++++++-----
> drivers/usb/dwc3/dwc3-generic.c | 2 +
> drivers/usb/host/Makefile | 1 -
> drivers/usb/host/xhci-keystone.c | 240 -----------------------------------------------------------------------------------------------------------
> drivers/usb/musb-new/am35x.c | 8 ++--
> drivers/usb/musb-new/musb_dsps.c | 8 ++--
> drivers/usb/musb-new/musb_gadget.c | 11 +++++
> drivers/usb/musb-new/musb_uboot.c | 4 +-
> drivers/usb/musb-new/ti-musb.c | 181 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------
> include/configs/am335x_evm.h | 1 -
> include/configs/ti_armv7_keystone2.h | 17 +++++---
> 38 files changed, 649 insertions(+), 324 deletions(-)
> create mode 100644 arch/arm/dts/am4372-u-boot.dtsi
> create mode 100644 drivers/phy/keystone-usb-phy.c
> delete mode 100644 drivers/usb/host/xhci-keystone.c
>
> Travis-Ci: https://travis-ci.org/lmajewski/u-boot-dfu/builds/467026476
>
> This is the last instalment of patches from Jean-Jacques
>
> Best regards,
>
> Lukasz Majewski
>
> --
>
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
>
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [GIT] Pull request: u-boot-dfu (13.12.2018)
2018-12-12 23:04 ` Marek Vasut
@ 2018-12-13 8:13 ` Lukasz Majewski
2018-12-13 9:06 ` Lokesh Vutla
0 siblings, 1 reply; 6+ messages in thread
From: Lukasz Majewski @ 2018-12-13 8:13 UTC (permalink / raw)
To: u-boot
Hi Marek,
> On 12/12/2018 11:58 PM, Lukasz Majewski wrote:
> > Dear Marek,
>
> This looks quite heavy after RC1 . How thoroughly was this tested ?
I've run:
./tools/buildman/buildman.py --branch=HEAD k2 omap am335x am43 dra7
trats2 odroid-xu3 --detail --verbose --show_errors --force-build
--count=20 --output-dir=../BUILD/
on it without any issues (DTS warnings were there - as expected).
Nonetheless, this is the second "instalment" of Jean-Jacques work and
shall IMHO be treated as a one part with the code already included to
main line.
I do not expect so much changes to DFU/UDC tree from now on - hence we
can focus on fixes.
>
> > The following changes since commit
> > 51b24944fdbfa760aa87a1ad812355e1df9c9355:
> >
> > usb: musb: Remove legacy CONFIG_USB_DA8XX (2018-12-12 15:23:04
> > +0100)
> >
> > are available in the git repository at:
> >
> > git://git.denx.de/u-boot-dfu.git
> >
> > for you to fetch changes up to
> > 8a3755462f65c032528af70c6582abf89f91b2bc:
> >
> > configs: am335x_boneblack_vboot: enable DM_USB and RNDIS boot in
> > SPl (2018-12-12 15:35:08 +0100)
> >
> > ----------------------------------------------------------------
> > Jean-Jacques Hiblot (20):
> > usb: dwc3-generic: make it compatible with "ti, keystone-dwc3"
> > board: ks2_evm: Enable the USB clocks if DM_USB is used
> > ARM: dts: k2g-evm: enable USB0 and USB1
> > PHY: Add phy driver for the keystone USB PHY
> > usb: host: replace xhci-keystone driver by the generic dwc3
> > driver configs: k2g_evm: Enable DFU on K2G EVM
> > spl: drivers: Link usb common library to SPL if USB gadget is
> > enabled spl: net: dm: usb: bind the gadget before attempting to
> > load the image phy: omap_usb2: Add support for am437x
> > dwc3-generic: Add support for the am437x
> > board: ti: am43xx: turn on USB clocks
> > dts: Add a u-boot specific dtsi file for the am4372
> > dts: am4372: Enable USB1 in SPL
> > configs: am43xx_evm: Enable DM_USB and DM_USB_GADGET
> > configs: am43xx: Enable RNDIS support in SPL
> > usb: musb-new: Allow the diver not to use the set_phy_power()
> > callback usb: musb-new: Add support for DM_USB
> > arm: am33xx: Register USB controllers if DM_USB is used but
> > not OF_CONTROL configs: am335x_evm: Do not disable DM_USB in SPL
> > configs: am335x_boneblack_vboot: enable DM_USB and RNDIS boot
> > in SPl
> >
> > arch/arm/dts/am4372-generic-u-boot.dtsi | 2 +
> > arch/arm/dts/am4372-u-boot.dtsi | 40 ++++++++++++++++++
> > arch/arm/dts/am437x-gp-evm-u-boot.dtsi | 2 +
> > arch/arm/dts/am437x-idk-evm-u-boot.dtsi | 2 +
> > arch/arm/dts/am437x-sk-evm-u-boot.dtsi | 2 +
> > arch/arm/dts/keystone-k2g-evm.dts | 28 +++++++++++++
> > arch/arm/dts/keystone-k2g.dtsi | 56
> > +++++++++++++++++++++++++ arch/arm/include/asm/omap_musb.h
> > | 8 ++++ arch/arm/mach-omap2/am33xx/board.c | 58
> > ++++++++++++++++++++++---- board/ti/am43xx/board.c
> > | 22 ++++++++++ board/ti/ks2_evm/board.c | 12
> > ++++++ common/Makefile | 3 ++
> > common/spl/spl_net.c | 4 +-
> > configs/am335x_boneblack_vboot_defconfig | 10 +++++
> > configs/am43xx_evm_defconfig | 19 +++++++++
> > configs/k2e_evm_defconfig | 7 ++++
> > configs/k2e_hs_evm_defconfig | 7 ++++
> > configs/k2g_evm_defconfig | 12 ++++++
> > configs/k2g_hs_evm_defconfig | 12 ++++++
> > configs/k2hk_evm_defconfig | 7 ++++
> > configs/k2hk_hs_evm_defconfig | 7 ++++
> > configs/k2l_evm_defconfig | 7 ++++
> > configs/k2l_hs_evm_defconfig | 7 ++++
> > drivers/Makefile | 1 +
> > drivers/phy/Kconfig | 10 +++++
> > drivers/phy/Makefile | 1 +
> > drivers/phy/keystone-usb-phy.c | 109
> > +++++++++++++++++++++++++++++++++++++++++++++++++
> > drivers/phy/omap-usb2-phy.c | 45 +++++++++++++++-----
> > drivers/usb/dwc3/dwc3-generic.c | 2 +
> > drivers/usb/host/Makefile | 1 -
> > drivers/usb/host/xhci-keystone.c | 240
> > -----------------------------------------------------------------------------------------------------------
> > drivers/usb/musb-new/am35x.c | 8 ++--
> > drivers/usb/musb-new/musb_dsps.c | 8 ++--
> > drivers/usb/musb-new/musb_gadget.c | 11 +++++
> > drivers/usb/musb-new/musb_uboot.c | 4 +-
> > drivers/usb/musb-new/ti-musb.c | 181
> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------
> > include/configs/am335x_evm.h | 1 -
> > include/configs/ti_armv7_keystone2.h | 17 +++++--- 38 files
> > changed, 649 insertions(+), 324 deletions(-) create mode 100644
> > arch/arm/dts/am4372-u-boot.dtsi create mode 100644
> > drivers/phy/keystone-usb-phy.c delete mode 100644
> > drivers/usb/host/xhci-keystone.c
> >
> > Travis-Ci:
> > https://travis-ci.org/lmajewski/u-boot-dfu/builds/467026476
> >
> > This is the last instalment of patches from Jean-Jacques
> >
> > Best regards,
> >
> > Lukasz Majewski
> >
> > --
> >
> > DENX Software Engineering GmbH, Managing Director: Wolfgang
> > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > lukma at denx.de
>
>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181213/e576f706/attachment.sig>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [GIT] Pull request: u-boot-dfu (13.12.2018)
2018-12-13 8:13 ` Lukasz Majewski
@ 2018-12-13 9:06 ` Lokesh Vutla
2018-12-13 13:24 ` Marek Vasut
0 siblings, 1 reply; 6+ messages in thread
From: Lokesh Vutla @ 2018-12-13 9:06 UTC (permalink / raw)
To: u-boot
Hi Marek, Lukasz,
On 13/12/18 1:43 PM, Lukasz Majewski wrote:
> Hi Marek,
>
>> On 12/12/2018 11:58 PM, Lukasz Majewski wrote:
>>> Dear Marek,
>>
>> This looks quite heavy after RC1 . How thoroughly was this tested ?
>
> I've run:
>
> ./tools/buildman/buildman.py --branch=HEAD k2 omap am335x am43 dra7
> trats2 odroid-xu3 --detail --verbose --show_errors --force-build
> --count=20 --output-dir=../BUILD/
>
> on it without any issues (DTS warnings were there - as expected).
>
>
> Nonetheless, this is the second "instalment" of Jean-Jacques work and
> shall IMHO be treated as a one part with the code already included to
> main line.
>
> I do not expect so much changes to DFU/UDC tree from now on - hence we
> can focus on fixes.
>
>>
>>> The following changes since commit
>>> 51b24944fdbfa760aa87a1ad812355e1df9c9355:
>>>
>>> usb: musb: Remove legacy CONFIG_USB_DA8XX (2018-12-12 15:23:04
>>> +0100)
>>>
>>> are available in the git repository at:
>>>
>>> git://git.denx.de/u-boot-dfu.git
>>>
>>> for you to fetch changes up to
>>> 8a3755462f65c032528af70c6582abf89f91b2bc:
FWIW, I did verify 8a3755462f65c032528af70c6582abf89f91b2bc on AM437x-gp evem.
MMC Boot and DFU at u-boot prompt: https://pastebin.ubuntu.com/p/gmT33ksrFC/
USB Host Boot: https://pastebin.ubuntu.com/p/zyn8PNdJ5V/
Thanks and regards,
Lokesh
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [GIT] Pull request: u-boot-dfu (13.12.2018)
2018-12-13 9:06 ` Lokesh Vutla
@ 2018-12-13 13:24 ` Marek Vasut
2018-12-13 13:36 ` Lukasz Majewski
0 siblings, 1 reply; 6+ messages in thread
From: Marek Vasut @ 2018-12-13 13:24 UTC (permalink / raw)
To: u-boot
On 12/13/2018 10:06 AM, Lokesh Vutla wrote:
> Hi Marek, Lukasz,
>
> On 13/12/18 1:43 PM, Lukasz Majewski wrote:
>> Hi Marek,
>>
>>> On 12/12/2018 11:58 PM, Lukasz Majewski wrote:
>>>> Dear Marek,
>>>
>>> This looks quite heavy after RC1 . How thoroughly was this tested ?
>>
>> I've run:
>>
>> ./tools/buildman/buildman.py --branch=HEAD k2 omap am335x am43 dra7
>> trats2 odroid-xu3 --detail --verbose --show_errors --force-build
>> --count=20 --output-dir=../BUILD/
>>
>> on it without any issues (DTS warnings were there - as expected).
>>
>>
>> Nonetheless, this is the second "instalment" of Jean-Jacques work and
>> shall IMHO be treated as a one part with the code already included to
>> main line.
>>
>> I do not expect so much changes to DFU/UDC tree from now on - hence we
>> can focus on fixes.
>>
>>>
>>>> The following changes since commit
>>>> 51b24944fdbfa760aa87a1ad812355e1df9c9355:
>>>>
>>>> usb: musb: Remove legacy CONFIG_USB_DA8XX (2018-12-12 15:23:04
>>>> +0100)
>>>>
>>>> are available in the git repository at:
>>>>
>>>> git://git.denx.de/u-boot-dfu.git
>>>>
>>>> for you to fetch changes up to
>>>> 8a3755462f65c032528af70c6582abf89f91b2bc:
>
>
> FWIW, I did verify 8a3755462f65c032528af70c6582abf89f91b2bc on AM437x-gp
> evem.
>
> MMC Boot and DFU at u-boot prompt:
> https://pastebin.ubuntu.com/p/gmT33ksrFC/
> USB Host Boot: https://pastebin.ubuntu.com/p/zyn8PNdJ5V/
Pulled, but I expect only fixes after this one.
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [GIT] Pull request: u-boot-dfu (13.12.2018)
2018-12-13 13:24 ` Marek Vasut
@ 2018-12-13 13:36 ` Lukasz Majewski
0 siblings, 0 replies; 6+ messages in thread
From: Lukasz Majewski @ 2018-12-13 13:36 UTC (permalink / raw)
To: u-boot
Hi Marek,
> On 12/13/2018 10:06 AM, Lokesh Vutla wrote:
> > Hi Marek, Lukasz,
> >
> > On 13/12/18 1:43 PM, Lukasz Majewski wrote:
> >> Hi Marek,
> >>
> >>> On 12/12/2018 11:58 PM, Lukasz Majewski wrote:
> >>>> Dear Marek,
> >>>
> >>> This looks quite heavy after RC1 . How thoroughly was this
> >>> tested ?
> >>
> >> I've run:
> >>
> >> ./tools/buildman/buildman.py --branch=HEAD k2 omap am335x am43 dra7
> >> trats2 odroid-xu3 --detail --verbose --show_errors --force-build
> >> --count=20 --output-dir=../BUILD/
> >>
> >> on it without any issues (DTS warnings were there - as expected).
> >>
> >>
> >> Nonetheless, this is the second "instalment" of Jean-Jacques work
> >> and shall IMHO be treated as a one part with the code already
> >> included to main line.
> >>
> >> I do not expect so much changes to DFU/UDC tree from now on -
> >> hence we can focus on fixes.
> >>
> >>>
> >>>> The following changes since commit
> >>>> 51b24944fdbfa760aa87a1ad812355e1df9c9355:
> >>>>
> >>>> usb: musb: Remove legacy CONFIG_USB_DA8XX (2018-12-12 15:23:04
> >>>> +0100)
> >>>>
> >>>> are available in the git repository at:
> >>>>
> >>>> git://git.denx.de/u-boot-dfu.git
> >>>>
> >>>> for you to fetch changes up to
> >>>> 8a3755462f65c032528af70c6582abf89f91b2bc:
> >
> >
> > FWIW, I did verify 8a3755462f65c032528af70c6582abf89f91b2bc on
> > AM437x-gp evem.
> >
> > MMC Boot and DFU at u-boot prompt:
> > https://pastebin.ubuntu.com/p/gmT33ksrFC/
> > USB Host Boot: https://pastebin.ubuntu.com/p/zyn8PNdJ5V/
>
> Pulled, but I expect only fixes after this one.
>
Roger :-)
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181213/d9c5d18d/attachment.sig>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-12-13 13:36 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-12-12 22:58 [U-Boot] [GIT] Pull request: u-boot-dfu (13.12.2018) Lukasz Majewski
2018-12-12 23:04 ` Marek Vasut
2018-12-13 8:13 ` Lukasz Majewski
2018-12-13 9:06 ` Lokesh Vutla
2018-12-13 13:24 ` Marek Vasut
2018-12-13 13:36 ` Lukasz Majewski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox