From: sbabic at denx.de <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/3] ARM: imx6q_logic: Enable SPL_DM with SPL_OF_CONTROL
Date: Sat, 20 Jul 2019 08:45:30 +0000 (UTC) [thread overview]
Message-ID: <20190720084533.219FBC21C6A@lists.denx.de> (raw)
In-Reply-To: <20190523191132.17439-2-aford173@gmail.com>
> With the spl code correctly returning either MMC1 or MMC2,
> this board can not boot either from internal eMMC (MMC1) or
> the uSD card on the baseboard (MMC2) using the device tree.
> Signed-off-by: Adam Ford <aford173@gmail.com>
> diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig
> index 0bb2fc6bbf..07cdeb821b 100644
> --- a/configs/imx6q_logic_defconfig
> +++ b/configs/imx6q_logic_defconfig
> @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x17800000
> CONFIG_SPL_GPIO_SUPPORT=y
> CONFIG_SPL_LIBCOMMON_SUPPORT=y
> CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> CONFIG_TARGET_MX6LOGICPD=y
> CONFIG_SPL_MMC_SUPPORT=y
> CONFIG_SPL_SERIAL_SUPPORT=y
> @@ -54,12 +55,16 @@ CONFIG_CMD_MTDPARTS=y
> CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
> CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:2m(spl),2m(uboot),1m(env),16m(kernel),1m(dtb),-(fs)"
> CONFIG_CMD_UBI=y
> +CONFIG_SPL_OF_CONTROL=y
> CONFIG_DEFAULT_DEVICE_TREE="imx6q-logicpd"
> CONFIG_ENV_IS_IN_FAT=y
> CONFIG_ENV_IS_IN_NAND=y
> CONFIG_ENV_FAT_INTERFACE="mmc"
> CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
> CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> +CONFIG_SPL_DM=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> +CONFIG_SPL_OF_TRANSLATE=y
> CONFIG_PCF8575_GPIO=y
> CONFIG_LED=y
> CONFIG_LED_GPIO=y
> @@ -82,6 +87,7 @@ CONFIG_DM_REGULATOR_GPIO=y
> CONFIG_MXC_UART=y
> CONFIG_USB=y
> CONFIG_DM_USB=y
> +# CONFIG_SPL_DM_USB is not set
> CONFIG_USB_GADGET=y
> CONFIG_USB_GADGET_MANUFACTURER="FSL"
> CONFIG_USB_GADGET_VENDOR_NUM=0x0525
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2019-07-20 8:45 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-23 19:11 [U-Boot] [PATCH 1/3] spl: imx6: Let spl_boot_device return USDHC1 or USDHC2 Adam Ford
2019-05-23 19:11 ` [U-Boot] [PATCH 2/3] ARM: imx6q_logic: Enable SPL_DM with SPL_OF_CONTROL Adam Ford
2019-07-20 8:45 ` sbabic at denx.de [this message]
2019-05-23 19:11 ` [U-Boot] [PATCH 3/3] ARM: imx6q_logic: With SPL_OF_CONTROL enabled, remove MMC init Adam Ford
2019-07-20 9:06 ` sbabic at denx.de
2019-07-15 13:58 ` [U-Boot] [PATCH 1/3] spl: imx6: Let spl_boot_device return USDHC1 or USDHC2 Adam Ford
2019-07-15 14:01 ` Stefano Babic
2019-07-20 8:57 ` sbabic at denx.de
2019-08-07 23:43 ` Ricardo Salveti
2019-08-08 13:13 ` Adam Ford
2019-08-08 14:01 ` Ricardo Salveti
2019-08-09 0:58 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190720084533.219FBC21C6A@lists.denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox