[U-Boot] [PATCH] mx6sabresd: Reduce overall SPL size

[U-Boot] [PATCH] mx6sabresd: Reduce overall SPL size

[Fabio Estevam]

Currently the SPL binary is 67 kB, which leaves only 1 kB of free
internal RAM space.

The following options can be safely removed to save some precious
SPL space:

- CONFIG_SPL_FS_EXT4: u-boot-dtb.img is stored in raw sector via dd
command (at offset 69 kB)
- CONFIG_SPL_I2C_SUPPORT: I2C is not used during SPL
- CONFIG_SPL_OS_BOOT: no need to make Falcon mode supported
by default

After this change the SPL binary size gets down to 51 kB.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
 configs/mx6sabresd_defconfig | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig
index 9400805831..84862feb8b 100644
--- a/configs/mx6sabresd_defconfig
+++ b/configs/mx6sabresd_defconfig
@@ -23,9 +23,6 @@ CONFIG_BOUNCE_BUFFER=y
 CONFIG_SPL_TEXT_BASE=0x00908000
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_FIT_IMAGE_TINY=y
-CONFIG_SPL_FS_EXT4=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_USB_HOST_SUPPORT=y
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
-- 
2.17.1

[U-Boot] [PATCH] mx6sabresd: Reduce overall SPL size

[Peng Fan]

> Subject: [PATCH] mx6sabresd: Reduce overall SPL size
> 
> Currently the SPL binary is 67 kB, which leaves only 1 kB of free internal RAM
> space.
> 
> The following options can be safely removed to save some precious SPL space:
> 
> - CONFIG_SPL_FS_EXT4: u-boot-dtb.img is stored in raw sector via dd
> command (at offset 69 kB)
> - CONFIG_SPL_I2C_SUPPORT: I2C is not used during SPL
> - CONFIG_SPL_OS_BOOT: no need to make Falcon mode supported by default
> 
> After this change the SPL binary size gets down to 51 kB.
> 
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> ---
>  configs/mx6sabresd_defconfig | 3 ---
>  1 file changed, 3 deletions(-)
> 
> diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig
> index 9400805831..84862feb8b 100644
> --- a/configs/mx6sabresd_defconfig
> +++ b/configs/mx6sabresd_defconfig
> @@ -23,9 +23,6 @@ CONFIG_BOUNCE_BUFFER=y
>  CONFIG_SPL_TEXT_BASE=0x00908000
>  CONFIG_SPL_SEPARATE_BSS=y
>  CONFIG_SPL_FIT_IMAGE_TINY=y
> -CONFIG_SPL_FS_EXT4=y
> -CONFIG_SPL_I2C_SUPPORT=y
> -CONFIG_SPL_OS_BOOT=y
>  CONFIG_SPL_USB_HOST_SUPPORT=y
>  CONFIG_SPL_USB_GADGET=y
>  CONFIG_SPL_USB_SDP_SUPPORT=y

Reviewed-by: Peng Fan <peng.fan@nxp.com>

> --
> 2.17.1

[U-Boot] [PATCH] mx6sabresd: Reduce overall SPL size

[sbabic at denx.de]

> Currently the SPL binary is 67 kB, which leaves only 1 kB of free
> internal RAM space.
> The following options can be safely removed to save some precious
> SPL space:
> - CONFIG_SPL_FS_EXT4: u-boot-dtb.img is stored in raw sector via dd
> command (at offset 69 kB)
> - CONFIG_SPL_I2C_SUPPORT: I2C is not used during SPL
> - CONFIG_SPL_OS_BOOT: no need to make Falcon mode supported
> by default
> After this change the SPL binary size gets down to 51 kB.
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> Reviewed-by: Peng Fan <peng.fan@nxp.com>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================