* [U-Boot] [PATCH 2/7] usb: gadget: dwc2: change trace level for phy errors managed by uclass
2019-11-12 10:01 [U-Boot] [PATCH 1/7] phy: generic: add error trace to detect PHY issue in uclass Patrick Delaunay
@ 2019-11-12 10:01 ` Patrick Delaunay
2019-11-12 10:01 ` [U-Boot] [PATCH 3/7] board: sunxi: " Patrick Delaunay
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Patrick Delaunay @ 2019-11-12 10:01 UTC (permalink / raw)
To: u-boot
As the error message is now displayed by generic phy functions,
the dev_err can be change to dev_dbg.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
---
drivers/usb/gadget/dwc2_udc_otg.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/gadget/dwc2_udc_otg.c b/drivers/usb/gadget/dwc2_udc_otg.c
index 35f4147840..35495e41fc 100644
--- a/drivers/usb/gadget/dwc2_udc_otg.c
+++ b/drivers/usb/gadget/dwc2_udc_otg.c
@@ -980,7 +980,7 @@ int dwc2_phy_setup(struct udevice *dev, struct phy **array, int *num_phys)
for (i = 0; i < count; i++) {
ret = generic_phy_init(&usb_phys[i]);
if (ret) {
- dev_err(dev, "Can't init USB PHY%d for %s\n",
+ dev_dbg(dev, "Can't init USB PHY%d for %s\n",
i, dev->name);
goto phys_init_err;
}
@@ -989,7 +989,7 @@ int dwc2_phy_setup(struct udevice *dev, struct phy **array, int *num_phys)
for (i = 0; i < count; i++) {
ret = generic_phy_power_on(&usb_phys[i]);
if (ret) {
- dev_err(dev, "Can't power USB PHY%d for %s\n",
+ dev_dbg(dev, "Can't power USB PHY%d for %s\n",
i, dev->name);
goto phys_poweron_err;
}
@@ -1027,7 +1027,7 @@ void dwc2_phy_shutdown(struct udevice *dev, struct phy *usb_phys, int num_phys)
ret = generic_phy_power_off(&usb_phys[i]);
ret |= generic_phy_exit(&usb_phys[i]);
if (ret) {
- dev_err(dev, "Can't shutdown USB PHY%d for %s\n",
+ dev_dbg(dev, "Can't shutdown USB PHY%d for %s\n",
i, dev->name);
}
}
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [U-Boot] [PATCH 3/7] board: sunxi: change trace level for phy errors managed by uclass
2019-11-12 10:01 [U-Boot] [PATCH 1/7] phy: generic: add error trace to detect PHY issue in uclass Patrick Delaunay
2019-11-12 10:01 ` [U-Boot] [PATCH 2/7] usb: gadget: dwc2: change trace level for phy errors managed by uclass Patrick Delaunay
@ 2019-11-12 10:01 ` Patrick Delaunay
2019-11-12 10:01 ` [U-Boot] [PATCH 4/7] usb: host: ohci: " Patrick Delaunay
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Patrick Delaunay @ 2019-11-12 10:01 UTC (permalink / raw)
To: u-boot
As the error message is now displayed by generic phy functions,
the pr_err can be change to pr_idebug.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
---
board/sunxi/board.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index e3b2d13892..95697f4aae 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -705,7 +705,7 @@ int g_dnl_board_usb_cable_connected(void)
ret = generic_phy_init(&phy);
if (ret) {
- pr_err("failed to init %s USB PHY\n", dev->name);
+ pr_debug("failed to init %s USB PHY\n", dev->name);
return ret;
}
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [U-Boot] [PATCH 4/7] usb: host: ohci: change trace level for phy errors managed by uclass
2019-11-12 10:01 [U-Boot] [PATCH 1/7] phy: generic: add error trace to detect PHY issue in uclass Patrick Delaunay
2019-11-12 10:01 ` [U-Boot] [PATCH 2/7] usb: gadget: dwc2: change trace level for phy errors managed by uclass Patrick Delaunay
2019-11-12 10:01 ` [U-Boot] [PATCH 3/7] board: sunxi: " Patrick Delaunay
@ 2019-11-12 10:01 ` Patrick Delaunay
2019-11-12 10:01 ` [U-Boot] [PATCH 5/7] usb: host: ehci-hcd: " Patrick Delaunay
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Patrick Delaunay @ 2019-11-12 10:01 UTC (permalink / raw)
To: u-boot
As the error message is now displayed by generic phy functions,
the dev_err can be change to dev_dbg.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
---
drivers/usb/host/ohci-generic.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/ohci-generic.c b/drivers/usb/host/ohci-generic.c
index 916ea0b955..e8cf26aa48 100644
--- a/drivers/usb/host/ohci-generic.c
+++ b/drivers/usb/host/ohci-generic.c
@@ -38,13 +38,13 @@ static int ohci_setup_phy(struct udevice *dev, int index)
} else {
ret = generic_phy_init(&priv->phy);
if (ret) {
- dev_err(dev, "failed to init usb phy\n");
+ dev_dbg(dev, "failed to init usb phy\n");
return ret;
}
ret = generic_phy_power_on(&priv->phy);
if (ret) {
- dev_err(dev, "failed to power on usb phy\n");
+ dev_dbg(dev, "failed to power on usb phy\n");
return generic_phy_exit(&priv->phy);
}
}
@@ -60,13 +60,13 @@ static int ohci_shutdown_phy(struct udevice *dev)
if (generic_phy_valid(&priv->phy)) {
ret = generic_phy_power_off(&priv->phy);
if (ret) {
- dev_err(dev, "failed to power off usb phy\n");
+ dev_dbg(dev, "failed to power off usb phy\n");
return ret;
}
ret = generic_phy_exit(&priv->phy);
if (ret) {
- dev_err(dev, "failed to power off usb phy\n");
+ dev_dbg(dev, "failed to power off usb phy\n");
return ret;
}
}
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [U-Boot] [PATCH 5/7] usb: host: ehci-hcd: change trace level for phy errors managed by uclass
2019-11-12 10:01 [U-Boot] [PATCH 1/7] phy: generic: add error trace to detect PHY issue in uclass Patrick Delaunay
` (2 preceding siblings ...)
2019-11-12 10:01 ` [U-Boot] [PATCH 4/7] usb: host: ohci: " Patrick Delaunay
@ 2019-11-12 10:01 ` Patrick Delaunay
2019-11-12 10:01 ` [U-Boot] [PATCH 6/7] usb: dwc3: " Patrick Delaunay
2019-11-12 10:01 ` [U-Boot] [PATCH 7/7] ata: dwc-ahci: " Patrick Delaunay
5 siblings, 0 replies; 7+ messages in thread
From: Patrick Delaunay @ 2019-11-12 10:01 UTC (permalink / raw)
To: u-boot
As the error message is now displayed by generic phy functions,
the pr_err can be change to pr_debug.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
---
drivers/usb/host/ehci-hcd.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 85918e85be..0f5a8ada31 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1697,13 +1697,13 @@ int ehci_setup_phy(struct udevice *dev, struct phy *phy, int index)
} else {
ret = generic_phy_init(phy);
if (ret) {
- dev_err(dev, "failed to init usb phy\n");
+ dev_dbg(dev, "failed to init usb phy\n");
return ret;
}
ret = generic_phy_power_on(phy);
if (ret) {
- dev_err(dev, "failed to power on usb phy\n");
+ dev_dbg(dev, "failed to power on usb phy\n");
return generic_phy_exit(phy);
}
}
@@ -1721,13 +1721,13 @@ int ehci_shutdown_phy(struct udevice *dev, struct phy *phy)
if (generic_phy_valid(phy)) {
ret = generic_phy_power_off(phy);
if (ret) {
- dev_err(dev, "failed to power off usb phy\n");
+ dev_dbg(dev, "failed to power off usb phy\n");
return ret;
}
ret = generic_phy_exit(phy);
if (ret) {
- dev_err(dev, "failed to power off usb phy\n");
+ dev_dbg(dev, "failed to power off usb phy\n");
return ret;
}
}
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [U-Boot] [PATCH 6/7] usb: dwc3: change trace level for phy errors managed by uclass
2019-11-12 10:01 [U-Boot] [PATCH 1/7] phy: generic: add error trace to detect PHY issue in uclass Patrick Delaunay
` (3 preceding siblings ...)
2019-11-12 10:01 ` [U-Boot] [PATCH 5/7] usb: host: ehci-hcd: " Patrick Delaunay
@ 2019-11-12 10:01 ` Patrick Delaunay
2019-11-12 10:01 ` [U-Boot] [PATCH 7/7] ata: dwc-ahci: " Patrick Delaunay
5 siblings, 0 replies; 7+ messages in thread
From: Patrick Delaunay @ 2019-11-12 10:01 UTC (permalink / raw)
To: u-boot
As the error message is now displayed by generic phy functions,
the pr_err can be change to pr_debug.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
---
drivers/usb/dwc3/core.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 23af60c98d..9342321320 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -832,8 +832,8 @@ int dwc3_setup_phy(struct udevice *dev, struct phy **array, int *num_phys)
for (i = 0; i < count; i++) {
ret = generic_phy_init(&usb_phys[i]);
if (ret) {
- pr_err("Can't init USB PHY%d for %s\n",
- i, dev->name);
+ pr_debug("Can't init USB PHY%d for %s\n",
+ i, dev->name);
goto phys_init_err;
}
}
@@ -841,8 +841,8 @@ int dwc3_setup_phy(struct udevice *dev, struct phy **array, int *num_phys)
for (i = 0; i < count; i++) {
ret = generic_phy_power_on(&usb_phys[i]);
if (ret) {
- pr_err("Can't power USB PHY%d for %s\n",
- i, dev->name);
+ pr_debug("Can't power USB PHY%d for %s\n",
+ i, dev->name);
goto phys_poweron_err;
}
}
@@ -878,8 +878,8 @@ int dwc3_shutdown_phy(struct udevice *dev, struct phy *usb_phys, int num_phys)
ret = generic_phy_power_off(&usb_phys[i]);
ret |= generic_phy_exit(&usb_phys[i]);
if (ret) {
- pr_err("Can't shutdown USB PHY%d for %s\n",
- i, dev->name);
+ pr_debug("Can't shutdown USB PHY%d for %s\n",
+ i, dev->name);
}
}
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [U-Boot] [PATCH 7/7] ata: dwc-ahci: change trace level for phy errors managed by uclass
2019-11-12 10:01 [U-Boot] [PATCH 1/7] phy: generic: add error trace to detect PHY issue in uclass Patrick Delaunay
` (4 preceding siblings ...)
2019-11-12 10:01 ` [U-Boot] [PATCH 6/7] usb: dwc3: " Patrick Delaunay
@ 2019-11-12 10:01 ` Patrick Delaunay
5 siblings, 0 replies; 7+ messages in thread
From: Patrick Delaunay @ 2019-11-12 10:01 UTC (permalink / raw)
To: u-boot
As the error message is now displayed by generic phy functions,
the pr_err can be change to pr_debug.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
---
drivers/ata/dwc_ahci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/dwc_ahci.c b/drivers/ata/dwc_ahci.c
index 017650ae46..3c2a3ac201 100644
--- a/drivers/ata/dwc_ahci.c
+++ b/drivers/ata/dwc_ahci.c
@@ -62,13 +62,13 @@ static int dwc_ahci_probe(struct udevice *dev)
ret = generic_phy_init(&phy);
if (ret) {
- pr_err("unable to initialize the sata phy\n");
+ pr_debug("unable to initialize the sata phy\n");
return ret;
}
ret = generic_phy_power_on(&phy);
if (ret) {
- pr_err("unable to power on the sata phy\n");
+ pr_debug("unable to power on the sata phy\n");
return ret;
}
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread