[PATCH v2 12/23] logicpd: Drop omap3 zoom1

[Jagan Teki <jagan@amarulasolutions.com>]

OF_CONTROL, DM_SPI and other driver model migration deadlines
are expired for this board.

Drop it.

Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- none

 arch/arm/mach-omap2/omap3/Kconfig |   8 --
 board/logicpd/zoom1/Kconfig       |  12 ---
 board/logicpd/zoom1/MAINTAINERS   |   6 --
 board/logicpd/zoom1/Makefile      |   6 --
 board/logicpd/zoom1/config.mk     |  14 ---
 board/logicpd/zoom1/zoom1.c       | 148 ------------------------------
 board/logicpd/zoom1/zoom1.h       | 122 ------------------------
 configs/omap3_zoom1_defconfig     |  41 ---------
 doc/README.omap3                  |   5 -
 include/configs/omap3_zoom1.h     | 131 --------------------------
 10 files changed, 493 deletions(-)
 delete mode 100644 board/logicpd/zoom1/Kconfig
 delete mode 100644 board/logicpd/zoom1/MAINTAINERS
 delete mode 100644 board/logicpd/zoom1/Makefile
 delete mode 100644 board/logicpd/zoom1/config.mk
 delete mode 100644 board/logicpd/zoom1/zoom1.c
 delete mode 100644 board/logicpd/zoom1/zoom1.h
 delete mode 100644 configs/omap3_zoom1_defconfig
 delete mode 100644 include/configs/omap3_zoom1.h

diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig
index 18068be076..7421fe5e6c 100644
--- a/arch/arm/mach-omap2/omap3/Kconfig
+++ b/arch/arm/mach-omap2/omap3/Kconfig
@@ -68,13 +68,6 @@ config TARGET_OMAP3_IGEP00X0
 	select OMAP3_GPIO_6
 	imply CMD_DM
 
-config TARGET_OMAP3_ZOOM1
-	bool "TI Zoom1"
-	select DM
-	select DM_GPIO
-	select DM_SERIAL
-	imply CMD_DM
-
 config TARGET_AM3517_CRANE
 	bool "am3517_crane"
 
@@ -154,7 +147,6 @@ source "board/ti/beagle/Kconfig"
 source "board/timll/devkit8000/Kconfig"
 source "board/ti/evm/Kconfig"
 source "board/isee/igep00x0/Kconfig"
-source "board/logicpd/zoom1/Kconfig"
 source "board/ti/am3517crane/Kconfig"
 source "board/corscience/tricorder/Kconfig"
 source "board/logicpd/omap3som/Kconfig"
diff --git a/board/logicpd/zoom1/Kconfig b/board/logicpd/zoom1/Kconfig
deleted file mode 100644
index d76cb663f7..0000000000
--- a/board/logicpd/zoom1/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_OMAP3_ZOOM1
-
-config SYS_BOARD
-	default "zoom1"
-
-config SYS_VENDOR
-	default "logicpd"
-
-config SYS_CONFIG_NAME
-	default "omap3_zoom1"
-
-endif
diff --git a/board/logicpd/zoom1/MAINTAINERS b/board/logicpd/zoom1/MAINTAINERS
deleted file mode 100644
index 338b965deb..0000000000
--- a/board/logicpd/zoom1/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-ZOOM1 BOARD
-M:	Nishanth Menon <nm@ti.com>
-S:	Maintained
-F:	board/logicpd/zoom1/
-F:	include/configs/omap3_zoom1.h
-F:	configs/omap3_zoom1_defconfig
diff --git a/board/logicpd/zoom1/Makefile b/board/logicpd/zoom1/Makefile
deleted file mode 100644
index e73b42e702..0000000000
--- a/board/logicpd/zoom1/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-obj-y	:= zoom1.o
diff --git a/board/logicpd/zoom1/config.mk b/board/logicpd/zoom1/config.mk
deleted file mode 100644
index a8e4f52e7b..0000000000
--- a/board/logicpd/zoom1/config.mk
+++ /dev/null
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2006-2008
-# Texas Instruments, <www.ti.com>
-#
-# Zoom MDK uses OMAP3 (ARM-CortexA8) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c
deleted file mode 100644
index 53dc9762f8..0000000000
--- a/board/logicpd/zoom1/zoom1.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2004-2008
- * Texas Instruments, <www.ti.com>
- *
- * Author :
- *	Nishanth Menon <nm@ti.com>
- *
- * Derived from Beagle Board and 3430 SDP code by
- *	Sunil Kumar <sunilsaini05@gmail.com>
- *	Shashi Ranjan <shashiranjanmca05@gmail.com>
- *	Richard Woodruff <r-woodruff2@ti.com>
- *	Syed Mohammed Khasim <khasim@ti.com>
- *
- */
-#include <common.h>
-#include <dm.h>
-#include <env.h>
-#include <init.h>
-#include <net.h>
-#include <ns16550.h>
-#include <netdev.h>
-#include <twl4030.h>
-#include <linux/mtd/omap_gpmc.h>
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-types.h>
-#include "zoom1.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * gpmc_cfg is initialized by gpmc_init and we use it here.
- * GPMC definitions for Ethenet Controller LAN9211
- */
-static const u32 gpmc_lab_enet[] = {
-	ZOOM1_ENET_GPMC_CONF1,
-	ZOOM1_ENET_GPMC_CONF2,
-	ZOOM1_ENET_GPMC_CONF3,
-	ZOOM1_ENET_GPMC_CONF4,
-	ZOOM1_ENET_GPMC_CONF5,
-	ZOOM1_ENET_GPMC_CONF6,
-	/*CONF7- computed as params */
-};
-
-static const struct ns16550_platdata zoom1_serial = {
-	.base = OMAP34XX_UART3,
-	.reg_shift = 2,
-	.clock = V_NS16550_CLK,
-	.fcr = UART_FCR_DEFVAL,
-};
-
-U_BOOT_DEVICE(zoom1_uart) = {
-	"ns16550_serial",
-	&zoom1_serial
-};
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
-	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-	/* CS1 is Ethernet LAN9211 */
-	enable_gpmc_cs_config(gpmc_lab_enet, &gpmc_cfg->cs[1],
-			      DEBUG_BASE, GPMC_SIZE_16M);
-	/* board id for Linux */
-	gd->bd->bi_arch_number = MACH_TYPE_OMAP_LDP;
-	/* boot param addr */
-	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
-	return 0;
-}
-
-/*
- * Routine: misc_init_r
- * Description: Configure zoom board specific configurations
- */
-int misc_init_r(void)
-{
-	twl4030_power_init();
-	twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
-	omap_die_id_display();
-
-	/*
-	 * Board Reset
-	 * The board is reset by holding the red button on the
-	 * top right front face for eight seconds.
-	 */
-	twl4030_power_reset_init();
-
-	return 0;
-}
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- *		hardware. Many pins need to be moved from protect to primary
- *		mode.
- */
-void set_muxconf_regs(void)
-{
-	/* platform specific muxes */
-	MUX_ZOOM1_MDK();
-}
-
-#ifdef CONFIG_MMC
-int board_mmc_init(bd_t *bis)
-{
-	return omap_mmc_init(0, 0, 0, -1, -1);
-}
-
-void board_mmc_power_init(void)
-{
-	twl4030_power_mmc_init(0);
-}
-#endif
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-
-#ifdef CONFIG_SMC911X
-#define STR_ENV_ETHADDR	"ethaddr"
-
-	struct eth_device *dev;
-	uchar eth_addr[6];
-
-	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-	if (!eth_env_get_enetaddr(STR_ENV_ETHADDR, eth_addr)) {
-		dev = eth_get_dev_by_index(0);
-		if (dev) {
-			eth_env_set_enetaddr(STR_ENV_ETHADDR, dev->enetaddr);
-		} else {
-			printf("zoom1: Couldn't get eth device\n");
-			rc = -1;
-		}
-	}
-#endif
-
-	return rc;
-}
-#endif
diff --git a/board/logicpd/zoom1/zoom1.h b/board/logicpd/zoom1/zoom1.h
deleted file mode 100644
index 63847616cf..0000000000
--- a/board/logicpd/zoom1/zoom1.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2008
- * Texas Instruments
- * Nishanth Menon <nm@ti.com>
- *
- * Derived from: board/omap3/beagle/beagle.h
- * Dirk Behme <dirk.behme@gmail.com>
- */
-#ifndef _BOARD_ZOOM1_H_
-#define _BOARD_ZOOM1_H_
-
-const omap3_sysinfo sysinfo = {
-	DDR_STACKED,
-	"OMAP3 Zoom MDK Rev 1",
-	"NAND",
-};
-
-#define ZOOM1_ENET_GPMC_CONF1  0x00611000
-#define ZOOM1_ENET_GPMC_CONF2  0x001F1F01
-#define ZOOM1_ENET_GPMC_CONF3  0x00080803
-#define ZOOM1_ENET_GPMC_CONF4  0x1D091D09
-#define ZOOM1_ENET_GPMC_CONF5  0x041D1F1F
-#define ZOOM1_ENET_GPMC_CONF6  0x1D0904C4
-
-/*
- * IEN	- Input Enable
- * IDIS	- Input Disable
- * PTD	- Pull type Down
- * PTU	- Pull type Up
- * DIS	- Pull type selection is inactive
- * EN	- Pull type selection is active
- * M0	- Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-#define MUX_ZOOM1_MDK() \
- /*SDRC*/\
-	MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)) /*SDRC_D0*/\
-	MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)) /*SDRC_D1*/\
-	MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)) /*SDRC_D2*/\
-	MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)) /*SDRC_D3*/\
-	MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)) /*SDRC_D4*/\
-	MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)) /*SDRC_D5*/\
-	MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)) /*SDRC_D6*/\
-	MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)) /*SDRC_D7*/\
-	MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)) /*SDRC_D8*/\
-	MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)) /*SDRC_D9*/\
-	MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)) /*SDRC_D10*/\
-	MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)) /*SDRC_D11*/\
-	MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)) /*SDRC_D12*/\
-	MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)) /*SDRC_D13*/\
-	MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)) /*SDRC_D14*/\
-	MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)) /*SDRC_D15*/\
-	MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)) /*SDRC_D16*/\
-	MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)) /*SDRC_D17*/\
-	MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)) /*SDRC_D18*/\
-	MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)) /*SDRC_D19*/\
-	MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)) /*SDRC_D20*/\
-	MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)) /*SDRC_D21*/\
-	MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)) /*SDRC_D22*/\
-	MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)) /*SDRC_D23*/\
-	MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)) /*SDRC_D24*/\
-	MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)) /*SDRC_D25*/\
-	MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)) /*SDRC_D26*/\
-	MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)) /*SDRC_D27*/\
-	MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)) /*SDRC_D28*/\
-	MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)) /*SDRC_D29*/\
-	MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)) /*SDRC_D30*/\
-	MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)) /*SDRC_D31*/\
-	MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)) /*SDRC_CLK*/\
-	MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS0*/\
-	MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS1*/\
-	MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS2*/\
-	MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS3*/\
- /*GPMC*/\
-	MUX_VAL(CP(GPMC_A1),		(IDIS | PTD | DIS | M0)) /*GPMC_A1*/\
-	MUX_VAL(CP(GPMC_A2),		(IDIS | PTD | DIS | M0)) /*GPMC_A2*/\
-	MUX_VAL(CP(GPMC_A3),		(IDIS | PTD | DIS | M0)) /*GPMC_A3*/\
-	MUX_VAL(CP(GPMC_A4),		(IDIS | PTD | DIS | M0)) /*GPMC_A4*/\
-	MUX_VAL(CP(GPMC_A5),		(IDIS | PTD | DIS | M0)) /*GPMC_A5*/\
-	MUX_VAL(CP(GPMC_A6),		(IDIS | PTD | DIS | M0)) /*GPMC_A6*/\
-	MUX_VAL(CP(GPMC_A7),		(IDIS | PTD | DIS | M0)) /*GPMC_A7*/\
-	MUX_VAL(CP(GPMC_A8),		(IDIS | PTD | DIS | M0)) /*GPMC_A8*/\
-	MUX_VAL(CP(GPMC_A9),		(IDIS | PTD | DIS | M0)) /*GPMC_A9*/\
-	MUX_VAL(CP(GPMC_A10),		(IDIS | PTD | DIS | M0)) /*GPMC_A10*/\
-	MUX_VAL(CP(GPMC_D0),		(IEN  | PTD | DIS | M0)) /*GPMC_D0*/\
-	MUX_VAL(CP(GPMC_D1),		(IEN  | PTD | DIS | M0)) /*GPMC_D1*/\
-	MUX_VAL(CP(GPMC_D2),		(IEN  | PTD | DIS | M0)) /*GPMC_D2*/\
-	MUX_VAL(CP(GPMC_D3),		(IEN  | PTD | DIS | M0)) /*GPMC_D3*/\
-	MUX_VAL(CP(GPMC_D4),		(IEN  | PTD | DIS | M0)) /*GPMC_D4*/\
-	MUX_VAL(CP(GPMC_D5),		(IEN  | PTD | DIS | M0)) /*GPMC_D5*/\
-	MUX_VAL(CP(GPMC_D6),		(IEN  | PTD | DIS | M0)) /*GPMC_D6*/\
-	MUX_VAL(CP(GPMC_D7),		(IEN  | PTD | DIS | M0)) /*GPMC_D7*/\
-	MUX_VAL(CP(GPMC_D8),		(IEN  | PTD | DIS | M0)) /*GPMC_D8*/\
-	MUX_VAL(CP(GPMC_D9),		(IEN  | PTD | DIS | M0)) /*GPMC_D9*/\
-	MUX_VAL(CP(GPMC_D10),		(IEN  | PTD | DIS | M0)) /*GPMC_D10*/\
-	MUX_VAL(CP(GPMC_D11),		(IEN  | PTD | DIS | M0)) /*GPMC_D11*/\
-	MUX_VAL(CP(GPMC_D12),		(IEN  | PTD | DIS | M0)) /*GPMC_D12*/\
-	MUX_VAL(CP(GPMC_D13),		(IEN  | PTD | DIS | M0)) /*GPMC_D13*/\
-	MUX_VAL(CP(GPMC_D14),		(IEN  | PTD | DIS | M0)) /*GPMC_D14*/\
-	MUX_VAL(CP(GPMC_D15),		(IEN  | PTD | DIS | M0)) /*GPMC_D15*/\
-	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS0*/\
-	MUX_VAL(CP(GPMC_NCS1),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS1*/\
-	MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTU | DIS | M7)) /*GPMC_nCS2*/\
-	MUX_VAL(CP(GPMC_NCS3),		(IEN  | PTU | DIS | M4)) /*GPMC_nCS3 -> GPIO54*/\
-	MUX_VAL(CP(GPMC_NCS4),		(IDIS | PTU | DIS | M4)) /*GPMC_nCS4 -> GPIO 55*/\
-	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTD | DIS | M4)) /*GPMC_nCS5 -> GPIO 56*/\
-	MUX_VAL(CP(GPMC_NCS6),		(IEN  | PTD | DIS | M7)) /*GPMC_nCS6*/\
-	MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTU | EN  | M1)) /*GPMC_nCS7 -> GPMC_IO_DIR*/\
-	MUX_VAL(CP(GPMC_CLK),		(IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\
-	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
-	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
-	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
-	MUX_VAL(CP(GPMC_NWP),		(IDIS | PTU | DIS | M0)) /*GPMC_nWP*/\
-	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\
-	MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTD | DIS | M0)) /*GPMC_nBE1*/\
-	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTD | EN  | M0)) /*GPMC_WAIT0*/\
-	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M0)) /*GPMC_WAIT1*/\
-	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M0)) /*GPMC_WAIT2*/\
-	MUX_VAL(CP(GPMC_WAIT3),		(IEN  | PTU | EN  | M0)) /*GPMC_WAIT3*/
-
-#endif /* _BOARD_ZOOM_H_ */
diff --git a/configs/omap3_zoom1_defconfig b/configs/omap3_zoom1_defconfig
deleted file mode 100644
index 17b36350e6..0000000000
--- a/configs/omap3_zoom1_defconfig
+++ /dev/null
@@ -1,41 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_TARGET_OMAP3_ZOOM1=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_CMD_IMI is not set
-CONFIG_CMD_ASKENV=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_NAND_LOCK_UNLOCK=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs)"
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_TWL4030_LED=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0x08000000
-CONFIG_SMC911X_32_BIT=y
-CONFIG_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-CONFIG_USB_MUSB_UDC=y
-CONFIG_USB_OMAP3=y
-CONFIG_TWL4030_USB=y
-CONFIG_USB_GADGET=y
-CONFIG_FAT_WRITE=y
-CONFIG_OF_LIBFDT=y
diff --git a/doc/README.omap3 b/doc/README.omap3
index bf99cff848..5f2af88334 100644
--- a/doc/README.omap3
+++ b/doc/README.omap3
@@ -41,11 +41,6 @@ make
 make omap3_evm_config
 make
 
-* Zoom MDK:
-
-make omap3_zoom1_config
-make
-
 * Zoom 2:
 
 make omap3_zoom2_config
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
deleted file mode 100644
index 24884b26fb..0000000000
--- a/include/configs/omap3_zoom1.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2006-2008
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <x0khasim@ti.com>
- * Nishanth Menon <nm@ti.com>
- *
- * Configuration settings for the TI OMAP3430 Zoom MDK board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/cpu.h>		/* get chip and board defs */
-#include <asm/arch/omap.h>
-#include <configs/ti_omap3_common.h>
-
-/* Remove SPL boot option - we do not support that on LDP yet */
-
-/* Generic NAND definition conflicts with debug_base */
-#undef CONFIG_SYS_NAND_BASE
-
-#define CONFIG_REVISION_TAG		1
-
-/*
- * Hardware drivers
- */
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE		1
-#define CONFIG_USB_TTY			1
-/* Change these to suit your needs */
-#define CONFIG_USBD_VENDORID		0x0451
-#define CONFIG_USBD_PRODUCTID		0x5678
-#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
-#define CONFIG_USBD_PRODUCT_NAME	"Zoom1"
-
-#if defined(CONFIG_CMD_NAND)
-/* NAND: SPL falcon mode configs */
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x280000
-#endif
-#endif
-
-/*
- * TWL4030
- */
-
-/*
- * Board NAND Info.
- */
-#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
-							/* to access nand at */
-							/* CS0 */
-
-/* Environment information */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"loadaddr=0x82000000\0" \
-	"fdtaddr=0x80f80000\0" \
-	"bootfile=uImage\0" \
-	"fdtfile=omap3-ldp.dtb\0" \
-	"bootdir=/\0" \
-	"bootpart=0:1\0" \
-	"usbtty=cdc_acm\0" \
-	"console=ttyO2,115200n8\0" \
-	"mmcdev=0\0" \
-	"videomode=1024x768 at 60,vxres=1024,vyres=768\0" \
-	"videospec=omapfb:vram:2M,vram:4M\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"video=${videospec},mode:${videomode} " \
-		"root=/dev/mmcblk0p2 rw " \
-		"rootfstype=ext3 rootwait\0" \
-	"nandargs=setenv bootargs console=${console} " \
-		"video=${videospec},mode:${videomode} " \
-		"root=/dev/mtdblock4 rw " \
-		"rootfstype=jffs2\0" \
-	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source ${loadaddr}\0" \
-	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-	"loadzimage=setenv bootfile zImage; if run loadimage; then run loadfdt;fi\0"\
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"bootm ${loadaddr}\0" \
-	"mmczboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"bootz ${loadaddr} - ${fdtaddr}\0" \
-	"nandboot=echo Booting from nand ...; " \
-		"run nandargs; " \
-		"nand read ${loadaddr} 280000 400000; " \
-		"bootm ${loadaddr}\0" \
-
-#define CONFIG_BOOTCOMMAND \
-	"mmc dev ${mmcdev}; if mmc rescan; then " \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"else " \
-			"if run loadimage; then " \
-				"run mmcboot; " \
-			"else if run loadzimage; then " \
-				"run mmczboot; " \
-			"else run nandboot; " \
-			"fi; fi;" \
-		"fi; " \
-	"else run nandboot; fi"
-
-/*
- * Miscellaneous configurable options
- */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-/* **** PISMO SUPPORT *** */
-#if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE		NAND_BASE
-#endif
-
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
-
-#define ONENAND_ENV_OFFSET		0x260000 /* environment starts here */
-
-#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-
-#endif				/* __CONFIG_H */
-- 
2.25.1