From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [PATCH v2 06/23] siemens: pxm2: Enable DM_SPI, DM_SPI_FLASH
Date: Wed, 27 May 2020 18:26:20 +0530 [thread overview]
Message-ID: <20200527125637.149189-7-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20200527125637.149189-1-jagan@amarulasolutions.com>
Enable DM_SPI, DM_SPI_FLASH for siemens pxm2 board.
Build is fine, but not tested.
Cc: Samuel Egli <samuel.egli@siemens.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- new patch
configs/pxm2_defconfig | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig
index 67de086c0b..51c60b6a5c 100644
--- a/configs/pxm2_defconfig
+++ b/configs/pxm2_defconfig
@@ -59,10 +59,12 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(spl),128k(spl.backup1),128k(spl.backup2),128k(spl.backup3),1920k(u-boot),128k(uboot.env),5120k(kernel_a),5120k(kernel_b),8192k(mtdoops),-(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_DEFAULT_DEVICE_TREE="am335x-pxm50"
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_ENV=y
CONFIG_DFU_NAND=y
@@ -70,6 +72,7 @@ CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
@@ -77,6 +80,7 @@ CONFIG_PHY_ATHEROS=y
CONFIG_MII=y
CONFIG_DRIVER_TI_CPSW=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_OMAP3_SPI=y
CONFIG_USB=y
CONFIG_USB_MUSB_HOST=y
--
2.25.1
next prev parent reply other threads:[~2020-05-27 12:56 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-27 12:56 [PATCH v2 00/23] spi: dm-conversion (part1) Jagan Teki
2020-05-27 12:56 ` [PATCH v2 01/23] configs: igep00x0: Enable DM_SPI Jagan Teki
2020-06-03 16:14 ` Enric Balletbo i Serra
2020-06-11 9:26 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 02/23] am335x: sl50: " Jagan Teki
2020-06-03 16:14 ` Enric Balletbo i Serra
2020-06-11 9:28 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 03/23] am335x: baltos: " Jagan Teki
2020-06-13 18:01 ` Jagan Teki
2020-06-14 18:37 ` Yegor Yefremov
2020-06-18 16:23 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 04/23] am335x: igep003x: " Jagan Teki
2020-06-13 18:02 ` Jagan Teki
2020-07-07 15:27 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 05/23] siemens: draco: Enable DM_SPI, DM_SPI_FLASH Jagan Teki
2020-06-13 18:03 ` Jagan Teki
2020-07-07 15:28 ` Jagan Teki
2020-05-27 12:56 ` Jagan Teki [this message]
2020-06-13 18:05 ` [PATCH v2 06/23] siemens: pxm2: " Jagan Teki
2020-07-07 15:29 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 07/23] siemens: rut: " Jagan Teki
2020-06-13 18:06 ` Jagan Teki
2020-07-07 15:29 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 08/23] compulab: Drop cm_t54 Jagan Teki
2020-06-13 18:07 ` Jagan Teki
2020-07-07 15:34 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 09/23] compulab: Drop cm_t35 Jagan Teki
2020-06-13 18:11 ` Jagan Teki
2020-07-07 15:36 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 10/23] overo: Drop omap3 overo Jagan Teki
2020-06-13 18:13 ` Jagan Teki
2020-07-07 15:40 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 11/23] pandora: Drop omap3 pandora Jagan Teki
2020-05-28 9:41 ` Gražvydas Ignotas
2020-05-29 12:39 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 12/23] logicpd: Drop omap3 zoom1 Jagan Teki
2020-06-13 18:15 ` Jagan Teki
2020-06-16 12:59 ` Nishanth Menon
2020-07-07 15:43 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 13/23] quipos: Drop omap3 cairo Jagan Teki
2020-06-13 18:17 ` Jagan Teki
2020-07-07 15:45 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 14/23] gumstix: Drop duovero Jagan Teki
2020-06-13 18:19 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 15/23] ti: Drop panda board Jagan Teki
2020-06-05 4:31 ` Lokesh Vutla
2020-06-13 18:23 ` Jagan Teki
2020-06-13 19:32 ` Peter Robinson
2020-06-13 19:35 ` Jagan Teki
2020-06-13 19:39 ` Tom Rini
2020-06-13 19:43 ` Jagan Teki
2020-06-13 23:15 ` Peter Robinson
2020-06-13 23:23 ` Tom Rini
2020-05-27 12:56 ` [PATCH v2 16/23] ti: Drop sdp4430 board Jagan Teki
2020-06-13 18:21 ` Jagan Teki
2020-07-07 15:48 ` Jagan Teki
2020-07-07 16:00 ` Tom Rini
2020-07-08 6:42 ` Jagan Teki
2020-07-08 17:55 ` Tom Rini
2020-05-27 12:56 ` [PATCH v2 17/23] ti: Drop omap5 uevm Jagan Teki
2020-06-05 4:32 ` Lokesh Vutla
2020-06-13 18:24 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 18/23] birdland: Drop bav335x Jagan Teki
2020-06-13 18:26 ` Jagan Teki
2020-07-07 15:51 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 19/23] gumstix: Drop pepper Jagan Teki
2020-06-13 18:27 ` Jagan Teki
2020-07-07 15:53 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 20/23] phytec: Drop pcm051 Jagan Teki
2020-05-27 14:10 ` Lars Poeschel
2020-05-29 12:40 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 21/23] silica: Drop pengwyn Jagan Teki
2020-06-13 18:28 ` Jagan Teki
2020-07-07 15:55 ` Jagan Teki
2020-05-27 12:56 ` [PATCH v2 22/23] spi: omap3: Drop nondm code Jagan Teki
2020-05-27 12:56 ` [PATCH v2 23/23] doc: driver-model: Update SPI migration status Jagan Teki
2020-05-27 13:27 ` [PATCH v2 00/23] spi: dm-conversion (part1) Simon Glass
2020-05-27 15:55 ` Jagan Teki
2020-05-28 3:08 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200527125637.149189-7-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox