* [PATCH 0/2] board: amlogic: move boards doc into doc/board/amlogic @ 2020-06-11 13:28 Neil Armstrong 2020-06-11 13:28 ` [PATCH 1/2] " Neil Armstrong 2020-06-11 13:28 ` [PATCH 2/2] board: amlogic: add board doc files to MAINTAINERS Neil Armstrong 0 siblings, 2 replies; 7+ messages in thread From: Neil Armstrong @ 2020-06-11 13:28 UTC (permalink / raw) To: u-boot As asked by Tom, this moves all the Amlogic board documentation into doc/board/amlogic into RsT and proper index with feature matrix. Neil Armstrong (2): board: amlogic: move boards doc into doc/board/amlogic board: amlogic: add board doc files to MAINTAINERS MAINTAINERS | 1 + board/amlogic/p200/MAINTAINERS | 3 + board/amlogic/p201/MAINTAINERS | 1 + board/amlogic/p212/MAINTAINERS | 4 + board/amlogic/q200/MAINTAINERS | 1 + board/amlogic/s400/MAINTAINERS | 1 + board/amlogic/sei510/MAINTAINERS | 1 + board/amlogic/sei610/MAINTAINERS | 1 + board/amlogic/u200/MAINTAINERS | 1 + board/amlogic/w400/MAINTAINERS | 4 + doc/board/amlogic/index.rst | 95 +++++++++ .../board/amlogic/khadas-vim.rst | 138 +++++++------ .../board/amlogic/khadas-vim2.rst | 138 ++++++------- .../board/amlogic/khadas-vim3.rst | 189 +++++++++-------- .../board/amlogic/khadas-vim3l.rst | 189 +++++++++-------- .../board/amlogic/libretech-ac.rst | 142 ++++++------- .../board/amlogic/libretech-cc.rst | 139 +++++++------ .../board/amlogic/nanopi-k2.rst | 136 +++++++------ .../board/amlogic/odroid-c2.rst | 50 +++-- .../board/amlogic/odroid-n2.rst | 187 +++++++++-------- .../README.p200 => doc/board/amlogic/p200.rst | 136 ++++++------- .../README.p201 => doc/board/amlogic/p201.rst | 136 ++++++------- .../README.p212 => doc/board/amlogic/p212.rst | 136 ++++++------- .../README.q200 => doc/board/amlogic/q200.rst | 136 ++++++------- .../s400/README => doc/board/amlogic/s400.rst | 150 +++++++------- .../README => doc/board/amlogic/sei510.rst | 190 ++++++++--------- .../README => doc/board/amlogic/sei610.rst | 185 +++++++++-------- .../u200/README => doc/board/amlogic/u200.rst | 188 ++++++++--------- .../README.w400 => doc/board/amlogic/w400.rst | 192 +++++++++--------- doc/board/index.rst | 1 + 30 files changed, 1502 insertions(+), 1369 deletions(-) create mode 100644 doc/board/amlogic/index.rst rename board/amlogic/p212/README.khadas-vim => doc/board/amlogic/khadas-vim.rst (24%) rename board/amlogic/q200/README.khadas-vim2 => doc/board/amlogic/khadas-vim2.rst (26%) rename board/amlogic/w400/README.khadas-vim3 => doc/board/amlogic/khadas-vim3.rst (20%) rename board/amlogic/w400/README.khadas-vim3l => doc/board/amlogic/khadas-vim3l.rst (19%) rename board/amlogic/p212/README.libretech-ac => doc/board/amlogic/libretech-ac.rst (21%) rename board/amlogic/p212/README.libretech-cc => doc/board/amlogic/libretech-cc.rst (46%) rename board/amlogic/p200/README.nanopi-k2 => doc/board/amlogic/nanopi-k2.rst (24%) rename board/amlogic/p200/README.odroid-c2 => doc/board/amlogic/odroid-c2.rst (56%) rename board/amlogic/w400/README.odroid-n2 => doc/board/amlogic/odroid-n2.rst (19%) rename board/amlogic/p200/README.p200 => doc/board/amlogic/p200.rst (24%) rename board/amlogic/p201/README.p201 => doc/board/amlogic/p201.rst (24%) rename board/amlogic/p212/README.p212 => doc/board/amlogic/p212.rst (24%) rename board/amlogic/q200/README.q200 => doc/board/amlogic/q200.rst (24%) rename board/amlogic/s400/README => doc/board/amlogic/s400.rst (21%) rename board/amlogic/sei510/README => doc/board/amlogic/sei510.rst (14%) rename board/amlogic/sei610/README => doc/board/amlogic/sei610.rst (16%) rename board/amlogic/u200/README => doc/board/amlogic/u200.rst (17%) rename board/amlogic/w400/README.w400 => doc/board/amlogic/w400.rst (17%) -- 2.22.0 ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/2] board: amlogic: move boards doc into doc/board/amlogic 2020-06-11 13:28 [PATCH 0/2] board: amlogic: move boards doc into doc/board/amlogic Neil Armstrong @ 2020-06-11 13:28 ` Neil Armstrong 2020-06-12 10:55 ` Heinrich Schuchardt 2020-06-16 4:35 ` Anand Moon 2020-06-11 13:28 ` [PATCH 2/2] board: amlogic: add board doc files to MAINTAINERS Neil Armstrong 1 sibling, 2 replies; 7+ messages in thread From: Neil Armstrong @ 2020-06-11 13:28 UTC (permalink / raw) To: u-boot Move the natural text Amlogic board README files to doc/board/amlogic into reStructuredText and : - add reStructuredText markup for bash code - fix secondary titles markup - move board support into global support matrix Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- doc/board/amlogic/index.rst | 95 +++++++++ .../board/amlogic/khadas-vim.rst | 138 +++++++------ .../board/amlogic/khadas-vim2.rst | 138 ++++++------- .../board/amlogic/khadas-vim3.rst | 189 +++++++++-------- .../board/amlogic/khadas-vim3l.rst | 189 +++++++++-------- .../board/amlogic/libretech-ac.rst | 142 ++++++------- .../board/amlogic/libretech-cc.rst | 139 +++++++------ .../board/amlogic/nanopi-k2.rst | 136 +++++++------ .../board/amlogic/odroid-c2.rst | 50 +++-- .../board/amlogic/odroid-n2.rst | 187 +++++++++-------- .../README.p200 => doc/board/amlogic/p200.rst | 136 ++++++------- .../README.p201 => doc/board/amlogic/p201.rst | 136 ++++++------- .../README.p212 => doc/board/amlogic/p212.rst | 136 ++++++------- .../README.q200 => doc/board/amlogic/q200.rst | 136 ++++++------- .../s400/README => doc/board/amlogic/s400.rst | 150 +++++++------- .../README => doc/board/amlogic/sei510.rst | 190 ++++++++--------- .../README => doc/board/amlogic/sei610.rst | 185 +++++++++-------- .../u200/README => doc/board/amlogic/u200.rst | 188 ++++++++--------- .../README.w400 => doc/board/amlogic/w400.rst | 192 +++++++++--------- doc/board/index.rst | 1 + 20 files changed, 1484 insertions(+), 1369 deletions(-) create mode 100644 doc/board/amlogic/index.rst rename board/amlogic/p212/README.khadas-vim => doc/board/amlogic/khadas-vim.rst (24%) rename board/amlogic/q200/README.khadas-vim2 => doc/board/amlogic/khadas-vim2.rst (26%) rename board/amlogic/w400/README.khadas-vim3 => doc/board/amlogic/khadas-vim3.rst (20%) rename board/amlogic/w400/README.khadas-vim3l => doc/board/amlogic/khadas-vim3l.rst (19%) rename board/amlogic/p212/README.libretech-ac => doc/board/amlogic/libretech-ac.rst (21%) rename board/amlogic/p212/README.libretech-cc => doc/board/amlogic/libretech-cc.rst (46%) rename board/amlogic/p200/README.nanopi-k2 => doc/board/amlogic/nanopi-k2.rst (24%) rename board/amlogic/p200/README.odroid-c2 => doc/board/amlogic/odroid-c2.rst (56%) rename board/amlogic/w400/README.odroid-n2 => doc/board/amlogic/odroid-n2.rst (19%) rename board/amlogic/p200/README.p200 => doc/board/amlogic/p200.rst (24%) rename board/amlogic/p201/README.p201 => doc/board/amlogic/p201.rst (24%) rename board/amlogic/p212/README.p212 => doc/board/amlogic/p212.rst (24%) rename board/amlogic/q200/README.q200 => doc/board/amlogic/q200.rst (24%) rename board/amlogic/s400/README => doc/board/amlogic/s400.rst (21%) rename board/amlogic/sei510/README => doc/board/amlogic/sei510.rst (14%) rename board/amlogic/sei610/README => doc/board/amlogic/sei610.rst (16%) rename board/amlogic/u200/README => doc/board/amlogic/u200.rst (17%) rename board/amlogic/w400/README.w400 => doc/board/amlogic/w400.rst (17%) diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst new file mode 100644 index 0000000000..3730419167 --- /dev/null +++ b/doc/board/amlogic/index.rst @@ -0,0 +1,95 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Amlogic +======= + +Hardware Support Matrix +----------------------- + +An up-do-date matrix is also available on: http://linux-meson.com + +This matrix concerns the actual source code version. + ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| | S905 | S905X | S912 | A113X | S905X2 | S922X | S905X3 | +| | | S805X | S905D | | S905D2 | A311D | S905D3 | +| | | | | | S905Y2 | | | ++===============================+===========+==============+==============+============+============+=============+==============+ +| Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 | +| | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L | +| | P200 | LibreTech-CC | | | | | | +| | P201 | LibreTech-AC | | | | | | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| Pinctrl/GPIO | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| Clock Control | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| PWM | No | No | No | No | No | No | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| Reset Control | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| Infrared Decoder | No | No | No | No | No | No | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| Ethernet | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| Multi-core | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| Fuse access | **Yes** | **Yes** |**Yes** |**Yes** |**Yes** |**Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| SPI (FC) | **Yes** | **Yes** | **Yes** | **Yes** |**Yes** | **Yes** | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| SPI (CC) | No | No | No | No | No | No | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| I2C | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| USB | **Yes** | **Yes** | **Yes** | No | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| USB OTG | No | **Yes** | **Yes** | No | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| eMMC | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| SDCard | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| NAND | No | No | No | No | No | No | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| ADC | **Yes** | **Yes** | **Yes** | No | No | No | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| CVBS Output | **Yes** | **Yes** | **Yes** | *N/A* | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| HDMI Output | **Yes** | **Yes** | **Yes** | *N/A* | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| CEC | No | No | No | *N/A* | No | No | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| Thermal Sensor | No | No | No | No | No | No | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| LCD/LVDS Output | No | *N/A* | No | No | No | No | No | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ +| SoC (version) information | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ + +Board Documentation +------------------- + +.. toctree:: + :maxdepth: 1 + + khadas-vim2 + khadas-vim3l + khadas-vim3 + khadas-vim + libretech-ac + libretech-cc + nanopi-k2 + odroid-c2 + odroid-n2 + p200 + p201 + p212 + q200 + s400 + sei510 + sei610 + u200 + w400 diff --git a/board/amlogic/p212/README.khadas-vim b/doc/board/amlogic/khadas-vim.rst similarity index 24% rename from board/amlogic/p212/README.khadas-vim rename to doc/board/amlogic/khadas-vim.rst index ccf933861b..397382c375 100644 --- a/board/amlogic/p212/README.khadas-vim +++ b/doc/board/amlogic/khadas-vim.rst @@ -1,5 +1,5 @@ U-Boot for Khadas VIM -======================= +====================== Khadas VIM is an Open Source DIY Box manufactured by Shenzhen Wesion Technology Co., Ltd with the following specifications: @@ -16,86 +16,84 @@ Technology Co., Ltd with the following specifications: - SDIO Wifi Module, Bluetooth - Two channels IR receiver -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - U-Boot compilation -================== +------------------ + +.. code-block:: bash - > export CROSS_COMPILE=aarch64-none-elf- - > make khadas-vim_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make khadas-vim_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/khadas/u-boot -b Vim vim-u-boot - > cd vim-u-boot - > make kvim_defconfig - > make CROSS_COMPILE=aarch64-none-elf- - > export FIPDIR=$PWD/fip +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/khadas/u-boot -b Vim vim-u-boot + $ cd vim-u-boot + $ make kvim_defconfig + $ make CROSS_COMPILE=aarch64-none-elf- + $ export FIPDIR=$PWD/fip Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/gxl/bl2.bin fip/ + $ cp $FIPDIR/gxl/acs.bin fip/ + $ cp $FIPDIR/gxl/bl21.bin fip/ + $ cp $FIPDIR/gxl/bl30.bin fip/ + $ cp $FIPDIR/gxl/bl301.bin fip/ + $ cp $FIPDIR/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc and then write the image to SD with: - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/q200/README.khadas-vim2 b/doc/board/amlogic/khadas-vim2.rst similarity index 26% rename from board/amlogic/q200/README.khadas-vim2 rename to doc/board/amlogic/khadas-vim2.rst index 595998c4fa..c57d96d8b0 100644 --- a/board/amlogic/q200/README.khadas-vim2 +++ b/doc/board/amlogic/khadas-vim2.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0+ + U-Boot for Khadas VIM2 ======================= @@ -17,86 +19,84 @@ Technology Co., Ltd with the following specifications: - SDIO Wifi Module, Bluetooth - Two channels IR receiver -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - U-Boot compilation -================== +------------------ + +.. code-block:: bash - > export CROSS_COMPILE=aarch64-none-elf- - > make khadas-vim2_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make khadas-vim2_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/khadas/u-boot -b khadas-vim-v2015.01 vim-u-boot - > cd vim-u-boot - > make kvim2_defconfig - > make - > export FIPDIR=$PWD/fip +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/khadas/u-boot -b khadas-vim-v2015.01 vim-u-boot + $ cd vim-u-boot + $ make kvim2_defconfig + $ make + $ export FIPDIR=$PWD/fip Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/gxl/bl2.bin fip/ + $ cp $FIPDIR/gxl/acs.bin fip/ + $ cp $FIPDIR/gxl/bl21.bin fip/ + $ cp $FIPDIR/gxl/bl30.bin fip/ + $ cp $FIPDIR/gxl/bl301.bin fip/ + $ cp $FIPDIR/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc and then write the image to SD with: - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/w400/README.khadas-vim3 b/doc/board/amlogic/khadas-vim3.rst similarity index 20% rename from board/amlogic/w400/README.khadas-vim3 rename to doc/board/amlogic/khadas-vim3.rst index 399bf49295..161ccc3ca3 100644 --- a/board/amlogic/w400/README.khadas-vim3 +++ b/doc/board/amlogic/khadas-vim3.rst @@ -16,116 +16,115 @@ Technology Co., Ltd. with the following specifications: Schematics are available on the manufacturer website. -Currently the U-Boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - ADC +U-Boot compilation +------------------ -u-boot compilation -================== +.. code-block:: bash - > export CROSS_COMPILE=aarch64-none-elf- - > make khadas-vim3_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make khadas-vim3_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > DIR=vim3-u-boot - > git clone --depth 1 \ + $ DIR=vim3-u-boot + $ git clone --depth 1 \ https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \ $DIR - > cd vim3-u-boot - > make kvim3_defconfig - > make - > export UBOOTDIR=$PWD + $ cd vim3-u-boot + $ make kvim3_defconfig + $ make + $ export UBOOTDIR=$PWD Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/khadas/kvim3/firmware/acs.bin fip/ - > cp $UBOOTDIR/fip/g12b/bl2.bin fip/ - > cp $UBOOTDIR/fip/g12b/bl30.bin fip/ - > cp $UBOOTDIR/fip/g12b/bl31.img fip/ - > cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ - > cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ - > cp $UBOOTDIR/fip/g12b/lpddr3_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ - > cp $UBOOTDIR/fip/g12b/piei.fw fip/ - > cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ - > cp u-boot.bin fip/bl33.bin - - > sh fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > sh fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 --compress lz4 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --ddrfw8 fip/aml_ddr.fw \ - --ddrfw9 fip/lpddr3_1d.fw \ - --level v3 + +.. code-block:: bash + + $ mkdir fip + + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/khadas/kvim3/firmware/acs.bin fip/ + $ cp $UBOOTDIR/fip/g12b/bl2.bin fip/ + $ cp $UBOOTDIR/fip/g12b/bl30.bin fip/ + $ cp $UBOOTDIR/fip/g12b/bl31.img fip/ + $ cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ + $ cp $UBOOTDIR/fip/g12b/lpddr3_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/piei.fw fip/ + $ cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 --compress lz4 + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --ddrfw9 fip/lpddr3_1d.fw \ + --level v3 and then write the image to SD with: - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/w400/README.khadas-vim3l b/doc/board/amlogic/khadas-vim3l.rst similarity index 19% rename from board/amlogic/w400/README.khadas-vim3l rename to doc/board/amlogic/khadas-vim3l.rst index b2d9abbfd9..9368359d5b 100644 --- a/board/amlogic/w400/README.khadas-vim3l +++ b/doc/board/amlogic/khadas-vim3l.rst @@ -16,116 +16,113 @@ Technology Co., Ltd. with the following specifications: Schematics are available on the manufacturer website. -Currently the U-Boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - ADC - -u-boot compilation -================== +U-Boot compilation +------------------ - > export CROSS_COMPILE=aarch64-none-elf- - > make khadas-vim3l_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make khadas-vim3l_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > DIR=vim3l-u-boot - > git clone --depth 1 \ + $ DIR=vim3l-u-boot + $ git clone --depth 1 \ https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \ $DIR - > cd vim3l-u-boot - > make kvim3l_defconfig - > make - > export UBOOTDIR=$PWD + $ cd vim3l-u-boot + $ make kvim3l_defconfig + $ make + $ export UBOOTDIR=$PWD Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/khadas/kvim3l/firmware/acs.bin fip/ - > cp $UBOOTDIR/fip/g12a/bl2.bin fip/ - > cp $UBOOTDIR/fip/g12a/bl30.bin fip/ - > cp $UBOOTDIR/fip/g12a/bl31.img fip/ - > cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/ - > cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/ - > cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/ - > cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/ - > cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/ - > cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/ - > cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/ - > cp $UBOOTDIR/fip/g12a/piei.fw fip/ - > cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/ - > cp u-boot.bin fip/bl33.bin - - > sh fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > sh fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 --compress lz4 - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --ddrfw8 fip/aml_ddr.fw \ - --ddrfw9 fip/lpddr3_1d.fw \ - --level v3 + +.. code-block:: bash + + $ mkdir fip + + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/khadas/kvim3l/firmware/acs.bin fip/ + $ cp $UBOOTDIR/fip/g12a/bl2.bin fip/ + $ cp $UBOOTDIR/fip/g12a/bl30.bin fip/ + $ cp $UBOOTDIR/fip/g12a/bl31.img fip/ + $ cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/ + $ cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/piei.fw fip/ + $ cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 --compress lz4 + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --ddrfw9 fip/lpddr3_1d.fw \ + --level v3 and then write the image to SD with: - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/p212/README.libretech-ac b/doc/board/amlogic/libretech-ac.rst similarity index 21% rename from board/amlogic/p212/README.libretech-ac rename to doc/board/amlogic/libretech-ac.rst index 3f713ec326..31fe4985e7 100644 --- a/board/amlogic/p212/README.libretech-ac +++ b/doc/board/amlogic/libretech-ac.rst @@ -16,87 +16,93 @@ with the following specifications: Schematics are available on the manufacturer website. -Currently the U-Boot port supports the following devices: - - serial - - eMMC - - Ethernet - - USB - U-Boot compilation -================== +------------------ + +.. code-block:: bash - > export CROSS_COMPILE=aarch64-none-elf- - > make libretech-ac_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make libretech-ac_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b libretech-ac amlogic-u-boot - > cd amlogic-u-boot - > wget https://raw.githubusercontent.com/BayLibre/u-boot/libretech-cc/fip/blx_fix.sh - > make libretech_ac_defconfig - > make - > export UBOOTDIR=$PWD +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b libretech-ac amlogic-u-boot + $ cd amlogic-u-boot + $ wget https://raw.githubusercontent.com/BayLibre/u-boot/libretech-cc/fip/blx_fix.sh + $ make libretech_ac_defconfig + $ make + $ export UBOOTDIR=$PWD Download the latest Amlogic Buildroot package, and extract it : - > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz - > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180418/bootloader - > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180418 + +.. code-block:: bash + + $ wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz + $ tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180418/bootloader + $ export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180418 Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/bl21.bin fip/ - > cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/acs.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl2/bin/gxl/bl2.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl30/bin/gxl/bl30.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl31/bin/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > sh $UBOOTDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $BRDIR/bootloader/uboot-repo/fip/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > sh $UBOOTDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc + +.. code-block:: bash + + $ mkdir fip + + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/bl21.bin fip/ + $ cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/acs.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl2/bin/gxl/bl2.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl30/bin/gxl/bl30.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl31/bin/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh $UBOOTDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ $BRDIR/bootloader/uboot-repo/fip/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ sh $UBOOTDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc and then write the image to SD with: - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/p212/README.libretech-cc b/doc/board/amlogic/libretech-cc.rst similarity index 46% rename from board/amlogic/p212/README.libretech-cc rename to doc/board/amlogic/libretech-cc.rst index 74434d4435..5657f2c887 100644 --- a/board/amlogic/p212/README.libretech-cc +++ b/doc/board/amlogic/libretech-cc.rst @@ -16,26 +16,17 @@ with the following specifications: Schematics are available on the manufacturer website. -Currently the U-Boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - U-Boot compilation -================== +------------------ + +.. code-block:: bash - > export CROSS_COMPILE=aarch64-none-elf- - > make libretech-cc_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make libretech-cc_defconfig + $ make Image creation -============== +-------------- To boot the system, u-boot must be combined with several earlier stage bootloaders: @@ -53,74 +44,82 @@ for convenience at <https://github.com/BayLibre/u-boot/releases/> Download and extract the libretech-cc release from there, and set FIPDIR to point to the `fip` subdirectory. - > export FIPDIR=/path/to/extracted/fip +.. code-block:: bash + + $ export FIPDIR=/path/to/extracted/fip Alternatively, you can obtain the original vendor u-boot tree which contains the required blobs and sources, and build yourself. Note that old compilers are required for this to build. The compilers here are suggested by Amlogic, and they are 32-bit x86 binaries. - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot - > cd amlogic-u-boot - > make libretech_cc_defconfig - > make - > export FIPDIR=$PWD/fip +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot + $ cd amlogic-u-boot + $ make libretech_cc_defconfig + $ make + $ export FIPDIR=$PWD/fip Once you have the binaries available (either through the prebuilt download, or having built the vendor u-boot yourself), you can then proceed to glue everything together. Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/gxl/bl2.bin fip/ + $ cp $FIPDIR/gxl/acs.bin fip/ + $ cp $FIPDIR/gxl/bl21.bin fip/ + $ cp $FIPDIR/gxl/bl30.bin fip/ + $ cp $FIPDIR/gxl/bl301.bin fip/ + $ cp $FIPDIR/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc and then write the image to SD with: - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 Note that Amlogic provides aml_encrypt_gxl as a 32-bit x86 binary with no source code. Should you prefer to avoid that, there are open source reverse diff --git a/board/amlogic/p200/README.nanopi-k2 b/doc/board/amlogic/nanopi-k2.rst similarity index 24% rename from board/amlogic/p200/README.nanopi-k2 rename to doc/board/amlogic/nanopi-k2.rst index c8dec3569b..b8147de61c 100644 --- a/board/amlogic/p200/README.nanopi-k2 +++ b/doc/board/amlogic/nanopi-k2.rst @@ -16,83 +16,87 @@ with the following specifications: Schematics are available on the manufacturer website. -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet +U-Boot compilation +------------------ -u-boot compilation -================== +.. code-block:: bash - > export CROSS_COMPILE=aarch64-none-elf- - > make nanopi-k2_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make nanopi-k2_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot - > git clone https://github.com/friendlyarm/u-boot.git -b nanopi-k2-v2015.01 amlogic-u-boot - > cd amlogic-u-boot - > sed -i 's/aarch64-linux-gnu-/aarch64-none-elf-/' Makefile - > sed -i 's/arm-linux-/arm-none-eabi-/' arch/arm/cpu/armv8/gxb/firmware/scp_task/Makefile - > make nanopi-k2_defconfig - > make - > export FIPDIR=$PWD/fip +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot + $ git clone https://github.com/friendlyarm/u-boot.git -b nanopi-k2-v2015.01 amlogic-u-boot + $ cd amlogic-u-boot + $ sed -i 's/aarch64-linux-gnu-/aarch64-none-elf-/' Makefile + $ sed -i 's/arm-linux-/arm-none-eabi-/' arch/arm/cpu/armv8/gxb/firmware/scp_task/Makefile + $ make nanopi-k2_defconfig + $ make + $ export FIPDIR=$PWD/fip Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxb/bl2.bin fip/ - > cp $FIPDIR/gxb/acs.bin fip/ - > cp $FIPDIR/gxb/bl21.bin fip/ - > cp $FIPDIR/gxb/bl30.bin fip/ - > cp $FIPDIR/gxb/bl301.bin fip/ - > cp $FIPDIR/gxb/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $FIPDIR/fip_create \ - --bl30 fip/bl30_new.bin \ - --bl31 fip/bl31.img \ - --bl33 fip/bl33.bin \ - fip/fip.bin - - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > cat fip/bl2_new.bin fip/fip.bin > fip/boot_new.bin - - > $FIPDIR/gxb/aml_encrypt_gxb --bootsig \ - --input fip/boot_new.bin - --output fip/u-boot.bin + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/gxb/bl2.bin fip/ + $ cp $FIPDIR/gxb/acs.bin fip/ + $ cp $FIPDIR/gxb/bl21.bin fip/ + $ cp $FIPDIR/gxb/bl30.bin fip/ + $ cp $FIPDIR/gxb/bl301.bin fip/ + $ cp $FIPDIR/gxb/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ $FIPDIR/fip_create \ + --bl30 fip/bl30_new.bin \ + --bl31 fip/bl31.img \ + --bl33 fip/bl33.bin \ + fip/fip.bin + + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ cat fip/bl2_new.bin fip/fip.bin > fip/boot_new.bin + + $ $FIPDIR/gxb/aml_encrypt_gxb --bootsig \ + --input fip/boot_new.bin + --output fip/u-boot.bin and then write the image to SD with: - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin of=$DEV conv=fsync,notrunc bs=512 seek=1 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin of=$DEV conv=fsync,notrunc bs=512 seek=1 diff --git a/board/amlogic/p200/README.odroid-c2 b/doc/board/amlogic/odroid-c2.rst similarity index 56% rename from board/amlogic/p200/README.odroid-c2 rename to doc/board/amlogic/odroid-c2.rst index 3b9f80df29..7b518fc26a 100644 --- a/board/amlogic/p200/README.odroid-c2 +++ b/doc/board/amlogic/odroid-c2.rst @@ -16,50 +16,46 @@ Co. Ltd with the following specifications: Schematics are available on the manufacturer website. -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - ADC +U-Boot compilation +------------------ -u-boot compilation -================== +.. code-block:: bash - > export CROSS_COMPILE=aarch64-none-elf- - > make odroid-c2_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make odroid-c2_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > DIR=odroid-c2 - > git clone --depth 1 \ +.. code-block:: bash + + $ DIR=odroid-c2 + $ git clone --depth 1 \ https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \ $DIR - > $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \ + $ $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \ --bl301 $DIR/fip/gxb/bl301.bin \ --bl31 $DIR/fip/gxb/bl31.bin \ --bl33 u-boot.bin \ $DIR/fip.bin - > $DIR/fip/fip_create --dump $DIR/fip.bin - > cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin - > $DIR/fip/gxb/aml_encrypt_gxb --bootsig \ + $ $DIR/fip/fip_create --dump $DIR/fip.bin + $ cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin + $ $DIR/fip/gxb/aml_encrypt_gxb --bootsig \ --input $DIR/boot_new.bin \ --output $DIR/u-boot.img - > dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96 + $ dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96 and then write the image to SD with: - > DEV=/dev/your_sd_device - > BL1=$DIR/sd_fuse/bl1.bin.hardkernel - > dd if=$BL1 of=$DEV conv=fsync bs=1 count=442 - > dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1 - > dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ BL1=$DIR/sd_fuse/bl1.bin.hardkernel + $ dd if=$BL1 of=$DEV conv=fsync bs=1 count=442 + $ dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1 + $ dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97 diff --git a/board/amlogic/w400/README.odroid-n2 b/doc/board/amlogic/odroid-n2.rst similarity index 19% rename from board/amlogic/w400/README.odroid-n2 rename to doc/board/amlogic/odroid-n2.rst index 8142eebea0..b7b9cccfa8 100644 --- a/board/amlogic/w400/README.odroid-n2 +++ b/doc/board/amlogic/odroid-n2.rst @@ -15,115 +15,114 @@ Co. Ltd with the following specifications: Schematics are available on the manufacturer website. -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - ADC +U-Boot compilation +------------------ -u-boot compilation -================== +.. code-block:: bash - > export CROSS_COMPILE=aarch64-none-elf- - > make odroid-n2_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make odroid-n2_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > DIR=odroid-n2 - > git clone --depth 1 \ + $ DIR=odroid-n2 + $ git clone --depth 1 \ https://github.com/hardkernel/u-boot.git -b odroidn2-v2015.01 \ $DIR - > cd odroid-n2 - > make odroidn2_defconfig - > make - > export UBOOTDIR=$PWD + $ cd odroid-n2 + $ make odroidn2_defconfig + $ make + $ export UBOOTDIR=$PWD Go back to mainline U-Boot source tree then : - > mkdir fip - - > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/hardkernel/odroidn2/firmware/acs.bin fip/ - > cp $UBOOTDIR/fip/g12b/bl2.bin fip/ - > cp $UBOOTDIR/fip/g12b/bl30.bin fip/ - > cp $UBOOTDIR/fip/g12b/bl31.img fip/ - > cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ - > cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ - > cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ - > cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ - > cp $UBOOTDIR/fip/g12b/piei.fw fip/ - > cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ - > cp u-boot.bin fip/bl33.bin - - > sh fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > sh fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 --compress lz4 - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --ddrfw8 fip/aml_ddr.fw \ - --level v3 + +.. code-block:: bash + + $ mkdir fip + + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/hardkernel/odroidn2/firmware/acs.bin fip/ + $ cp $UBOOTDIR/fip/g12b/bl2.bin fip/ + $ cp $UBOOTDIR/fip/g12b/bl30.bin fip/ + $ cp $UBOOTDIR/fip/g12b/bl31.img fip/ + $ cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ + $ cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ + $ cp $UBOOTDIR/fip/g12b/piei.fw fip/ + $ cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 --compress lz4 + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --level v3 and then write the image to SD with: - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/p200/README.p200 b/doc/board/amlogic/p200.rst similarity index 24% rename from board/amlogic/p200/README.p200 rename to doc/board/amlogic/p200.rst index 84d5ca5356..b6103b25fe 100644 --- a/board/amlogic/p200/README.p200 +++ b/doc/board/amlogic/p200.rst @@ -17,86 +17,84 @@ specifications: Schematics are available from Amlogic on demand. -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC +U-Boot compilation +------------------ -u-boot compilation -================== +.. code-block:: bash - > export CROSS_COMPILE=aarch64-none-elf- - > make p200_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make p200_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot - > cd amlogic-u-boot - > make gxb_p200_v1_defconfig - > make - > export FIPDIR=$PWD/fip +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot + $ cd amlogic-u-boot + $ make gxb_p200_v1_defconfig + $ make + $ export FIPDIR=$PWD/fip Go back to mainline U-boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/gxl/bl2.bin fip/ + $ cp $FIPDIR/gxl/acs.bin fip/ + $ cp $FIPDIR/gxl/bl21.bin fip/ + $ cp $FIPDIR/gxl/bl30.bin fip/ + $ cp $FIPDIR/gxl/bl301.bin fip/ + $ cp $FIPDIR/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc and then write the image to SD with: - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/p201/README.p201 b/doc/board/amlogic/p201.rst similarity index 24% rename from board/amlogic/p201/README.p201 rename to doc/board/amlogic/p201.rst index 4bb5e95905..da14f84ac2 100644 --- a/board/amlogic/p201/README.p201 +++ b/doc/board/amlogic/p201.rst @@ -17,86 +17,84 @@ specifications: Schematics are available from Amlogic on demand. -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC +U-Boot compilation +------------------ -u-boot compilation -================== +.. code-block:: bash - > export CROSS_COMPILE=aarch64-none-elf- - > make p201_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make p201_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot - > cd amlogic-u-boot - > make gxb_p201_v1_defconfig - > make - > export FIPDIR=$PWD/fip +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot + $ cd amlogic-u-boot + $ make gxb_p201_v1_defconfig + $ make + $ export FIPDIR=$PWD/fip Go back to mainline U-boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/gxl/bl2.bin fip/ + $ cp $FIPDIR/gxl/acs.bin fip/ + $ cp $FIPDIR/gxl/bl21.bin fip/ + $ cp $FIPDIR/gxl/bl30.bin fip/ + $ cp $FIPDIR/gxl/bl301.bin fip/ + $ cp $FIPDIR/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc and then write the image to SD with: - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/p212/README.p212 b/doc/board/amlogic/p212.rst similarity index 24% rename from board/amlogic/p212/README.p212 rename to doc/board/amlogic/p212.rst index 3776f24493..c6c375077d 100644 --- a/board/amlogic/p212/README.p212 +++ b/doc/board/amlogic/p212.rst @@ -17,86 +17,84 @@ specifications: Schematics are available from Amlogic on demand. -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC +U-Boot compilation +------------------ -u-boot compilation -================== +.. code-block:: bash - > export CROSS_COMPILE=aarch64-none-elf- - > make p212_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make p212_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot - > cd amlogic-u-boot - > make gxl_p212_v1_defconfig - > make - > export FIPDIR=$PWD/fip +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot + $ cd amlogic-u-boot + $ make gxl_p212_v1_defconfig + $ make + $ export FIPDIR=$PWD/fip Go back to mainline U-boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/gxl/bl2.bin fip/ + $ cp $FIPDIR/gxl/acs.bin fip/ + $ cp $FIPDIR/gxl/bl21.bin fip/ + $ cp $FIPDIR/gxl/bl30.bin fip/ + $ cp $FIPDIR/gxl/bl301.bin fip/ + $ cp $FIPDIR/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc and then write the image to SD with: - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/q200/README.q200 b/doc/board/amlogic/q200.rst similarity index 24% rename from board/amlogic/q200/README.q200 rename to doc/board/amlogic/q200.rst index d4142c88bd..58ebe52a2a 100644 --- a/board/amlogic/q200/README.q200 +++ b/doc/board/amlogic/q200.rst @@ -16,86 +16,84 @@ specifications: - SDIO Wifi Module, Bluetooth - IR receiver -Currently the u-boot port supports the following devices: - - serial - - eMMC, microSD - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC - U-Boot compilation -================== +------------------ + +.. code-block:: bash - > export CROSS_COMPILE=aarch64-none-elf- - > make khadas-vim2_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make khadas-vim2_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot - > cd amlogic-u-boot - > make gxm_q200_v1_defconfig - > make - > export FIPDIR=$PWD/fip +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot + $ cd amlogic-u-boot + $ make gxm_q200_v1_defconfig + $ make + $ export FIPDIR=$PWD/fip Go back to mainline U-Boot source tree then : - > mkdir fip - - > cp $FIPDIR/gxl/bl2.bin fip/ - > cp $FIPDIR/gxl/acs.bin fip/ - > cp $FIPDIR/gxl/bl21.bin fip/ - > cp $FIPDIR/gxl/bl30.bin fip/ - > cp $FIPDIR/gxl/bl301.bin fip/ - > cp $FIPDIR/gxl/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/gxl/bl2.bin fip/ + $ cp $FIPDIR/gxl/acs.bin fip/ + $ cp $FIPDIR/gxl/bl21.bin fip/ + $ cp $FIPDIR/gxl/bl30.bin fip/ + $ cp $FIPDIR/gxl/bl301.bin fip/ + $ cp $FIPDIR/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc and then write the image to SD with: - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/s400/README b/doc/board/amlogic/s400.rst similarity index 21% rename from board/amlogic/s400/README rename to doc/board/amlogic/s400.rst index a48db22a42..a1d5cac633 100644 --- a/board/amlogic/s400/README +++ b/doc/board/amlogic/s400.rst @@ -17,93 +17,91 @@ specifications: Schematics are available from Amlogic on demand. -Currently the u-boot port supports the following devices: - - serial - - eMMC - - Ethernet - - I2C - - Regulators - - Reset controller - - Clock controller - - USB Host - - ADC +U-Boot compilation +------------------ -u-boot compilation -================== +.. code-block:: bash - > export CROSS_COMPILE=aarch64-none-elf- - > make s400_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make s400_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot - > cd amlogic-u-boot - > make axg_s400_v1_defconfig - > make - > export FIPDIR=$PWD/fip +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot + $ cd amlogic-u-boot + $ make axg_s400_v1_defconfig + $ make + $ export FIPDIR=$PWD/fip Go back to mainline U-boot source tree then : - > mkdir fip - - > cp $FIPDIR/axg/bl2.bin fip/ - > cp $FIPDIR/axg/acs.bin fip/ - > cp $FIPDIR/axg/bl21.bin fip/ - > cp $FIPDIR/axg/bl30.bin fip/ - > cp $FIPDIR/axg/bl301.bin fip/ - > cp $FIPDIR/axg/bl31.img fip/ - > cp u-boot.bin fip/bl33.bin - - > $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 - - > $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 - > $FIPDIR/axg/aml_encrypt_axg --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $FIPDIR/axg/aml_encrypt_axg --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc --level v3 + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/axg/bl2.bin fip/ + $ cp $FIPDIR/axg/acs.bin fip/ + $ cp $FIPDIR/axg/bl21.bin fip/ + $ cp $FIPDIR/axg/bl30.bin fip/ + $ cp $FIPDIR/axg/bl301.bin fip/ + $ cp $FIPDIR/axg/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + $ $FIPDIR/axg/aml_encrypt_axg --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $FIPDIR/axg/aml_encrypt_axg --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc --level v3 and then write the image to SD with: - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/sei510/README b/doc/board/amlogic/sei510.rst similarity index 14% rename from board/amlogic/sei510/README rename to doc/board/amlogic/sei510.rst index d9358aa501..08adfd16c4 100644 --- a/board/amlogic/sei510/README +++ b/doc/board/amlogic/sei510.rst @@ -1,5 +1,5 @@ U-Boot for Amlogic SEI510 -======================= +========================= SEI510 is a customer board manufactured by SEI Robotics with the following specifications: @@ -13,110 +13,116 @@ specifications: - Infrared receiver - SDIO WiFi Module -Currently the u-boot port supports the following devices: - - serial - - Ethernet - - Regulators - - Clock controller +U-Boot compilation +------------------ -u-boot compilation -================== +.. code-block:: bash - > export CROSS_COMPILE=aarch64-none-elf- - > make sei510_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make sei510_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot - > cd amlogic-u-boot - > make g12a_u200_v1_defconfig - > make - > export UBOOTDIR=$PWD +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot + $ cd amlogic-u-boot + $ make g12a_u200_v1_defconfig + $ make + $ export UBOOTDIR=$PWD Download the latest Amlogic Buildroot package, and extract it : - > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz - > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader - > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706 - > export FIPDIR=$BRDIR/bootloader/uboot-repo/fip + +.. code-block:: bash + + $ wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz + $ tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader + $ export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706 + $ export FIPDIR=$BRDIR/bootloader/uboot-repo/fip Go back to mainline U-Boot source tree then : - > mkdir fip - - > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/ - > cp $FIPDIR/g12a/ddr3_1d.fw fip/ - > cp $FIPDIR/g12a/ddr4_1d.fw fip/ - > cp $FIPDIR/g12a/ddr4_2d.fw fip/ - > cp $FIPDIR/g12a/diag_lpddr4.fw fip/ - > cp $FIPDIR/g12a/lpddr4_1d.fw fip/ - > cp $FIPDIR/g12a/lpddr4_2d.fw fip/ - > cp $FIPDIR/g12a/piei.fw fip/ - > cp u-boot.bin fip/bl33.bin - - > sh fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > sh fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 - > $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $FIPDIR/g12a/aml_encrypt_g12a --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --level v3 + +.. code-block:: bash + + $ mkdir fip + + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/ + $ cp $FIPDIR/g12a/ddr3_1d.fw fip/ + $ cp $FIPDIR/g12a/ddr4_1d.fw fip/ + $ cp $FIPDIR/g12a/ddr4_2d.fw fip/ + $ cp $FIPDIR/g12a/diag_lpddr4.fw fip/ + $ cp $FIPDIR/g12a/lpddr4_1d.fw fip/ + $ cp $FIPDIR/g12a/lpddr4_2d.fw fip/ + $ cp $FIPDIR/g12a/piei.fw fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $FIPDIR/g12a/aml_encrypt_g12a --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --level v3 and then write the image to SD with: - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/sei610/README b/doc/board/amlogic/sei610.rst similarity index 16% rename from board/amlogic/sei610/README rename to doc/board/amlogic/sei610.rst index d96a94b5e9..14a953ed11 100644 --- a/board/amlogic/sei610/README +++ b/doc/board/amlogic/sei610.rst @@ -15,104 +15,117 @@ specifications: - Infrared receiver - SDIO WiFi Module -u-boot compilation -================== +U-Boot compilation +------------------ - > export CROSS_COMPILE=aarch64-none-elf- - > make sei610_defconfig - > make +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make sei610_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-4.9-g12a-201904 amlogic-u-boot - > cd amlogic-u-boot - > make sm1_ac200_v1_defconfig - > make - > export UBOOTDIR=$PWD +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-4.9-g12a-201904 amlogic-u-boot + $ cd amlogic-u-boot + $ make sm1_ac200_v1_defconfig + $ make + $ export UBOOTDIR=$PWD Download the latest Amlogic Buildroot package, and extract it : - > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/buildroot-openlinux-A113-201901.tgz - > tar xfz buildroot-openlinux-A113-201901.tgz buildroot-openlinux-A113-201901/bootloader - > export BRDIR=$PWD/buildroot-openlinux-A113-201901 - > export FIPDIR=$BRDIR/bootloader/uboot-repo/fip + +.. code-block:: bash + + $ wget http://openlinux2.amlogic.com:8000/ARM/filesystem/buildroot-openlinux-A113-201901.tgz + $ tar xfz buildroot-openlinux-A113-201901.tgz buildroot-openlinux-A113-201901/bootloader + $ export BRDIR=$PWD/buildroot-openlinux-A113-201901 + $ export FIPDIR=$BRDIR/bootloader/uboot-repo/fip Go back to mainline U-Boot source tree then : - > mkdir fip - - > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/ - > cp $FIPDIR/g12a/ddr3_1d.fw fip/ - > cp $FIPDIR/g12a/ddr4_1d.fw fip/ - > cp $FIPDIR/g12a/ddr4_2d.fw fip/ - > cp $FIPDIR/g12a/diag_lpddr4.fw fip/ - > cp $FIPDIR/g12a/lpddr4_1d.fw fip/ - > cp $FIPDIR/g12a/lpddr4_2d.fw fip/ - > cp $FIPDIR/g12a/piei.fw fip/ - > cp u-boot.bin fip/bl33.bin - - > sh fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > sh fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 - > $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $FIPDIR/g12a/aml_encrypt_g12a --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --level v3 + + +.. code-block:: bash + + $ mkdir fip + + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/ + $ cp $FIPDIR/g12a/ddr3_1d.fw fip/ + $ cp $FIPDIR/g12a/ddr4_1d.fw fip/ + $ cp $FIPDIR/g12a/ddr4_2d.fw fip/ + $ cp $FIPDIR/g12a/diag_lpddr4.fw fip/ + $ cp $FIPDIR/g12a/lpddr4_1d.fw fip/ + $ cp $FIPDIR/g12a/lpddr4_2d.fw fip/ + $ cp $FIPDIR/g12a/piei.fw fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $FIPDIR/g12a/aml_encrypt_g12a --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --level v3 and then write the image to SD with: - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/u200/README b/doc/board/amlogic/u200.rst similarity index 17% rename from board/amlogic/u200/README rename to doc/board/amlogic/u200.rst index a4080eb299..f099d9db17 100644 --- a/board/amlogic/u200/README +++ b/doc/board/amlogic/u200.rst @@ -18,110 +18,116 @@ specifications: Schematics are available from Amlogic on demand. -Currently the u-boot port supports the following devices: - - serial - - Ethernet - - Regulators - - Clock controller +U-Boot compilation +------------------ -u-boot compilation -================== +.. code-block:: bash - > export CROSS_COMPILE=aarch64-none-elf- - > make u200_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make u200_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot - > cd amlogic-u-boot - > make g12a_u200_v1_defconfig - > make - > export UBOOTDIR=$PWD +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot + $ cd amlogic-u-boot + $ make g12a_u200_v1_defconfig + $ make + $ export UBOOTDIR=$PWD Download the latest Amlogic Buildroot package, and extract it : - > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz - > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader - > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706 - > export FIPDIR=$BRDIR/bootloader/uboot-repo/fip + +.. code-block:: bash + + $ wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz + $ tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader + $ export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706 + $ export FIPDIR=$BRDIR/bootloader/uboot-repo/fip Go back to mainline U-Boot source tree then : - > mkdir fip - - > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/ - > cp $FIPDIR/g12a/ddr3_1d.fw fip/ - > cp $FIPDIR/g12a/ddr4_1d.fw fip/ - > cp $FIPDIR/g12a/ddr4_2d.fw fip/ - > cp $FIPDIR/g12a/diag_lpddr4.fw fip/ - > cp $FIPDIR/g12a/lpddr4_1d.fw fip/ - > cp $FIPDIR/g12a/lpddr4_2d.fw fip/ - > cp $FIPDIR/g12a/piei.fw fip/ - > cp u-boot.bin fip/bl33.bin - - > sh fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > sh fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 - > $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $FIPDIR/g12a/aml_encrypt_g12a --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --level v3 + +.. code-block:: bash + + $ mkdir fip + + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/ + $ cp $FIPDIR/g12a/ddr3_1d.fw fip/ + $ cp $FIPDIR/g12a/ddr4_1d.fw fip/ + $ cp $FIPDIR/g12a/ddr4_2d.fw fip/ + $ cp $FIPDIR/g12a/diag_lpddr4.fw fip/ + $ cp $FIPDIR/g12a/lpddr4_1d.fw fip/ + $ cp $FIPDIR/g12a/lpddr4_2d.fw fip/ + $ cp $FIPDIR/g12a/piei.fw fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + $ $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $FIPDIR/g12a/aml_encrypt_g12a --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --level v3 and then write the image to SD with: - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/w400/README.w400 b/doc/board/amlogic/w400.rst similarity index 17% rename from board/amlogic/w400/README.w400 rename to doc/board/amlogic/w400.rst index c129717a11..f9b636ecee 100644 --- a/board/amlogic/w400/README.w400 +++ b/doc/board/amlogic/w400.rst @@ -18,112 +18,118 @@ specifications: Schematics are available from Amlogic on demand. -Currently the u-boot port supports the following devices: - - serial - - Ethernet - - Regulators - - Clock controller +U-Boot compilation +------------------ -u-boot compilation -================== +.. code-block:: bash - > export CROSS_COMPILE=aarch64-none-elf- - > make w400_defconfig - > make + $ export CROSS_COMPILE=aarch64-none-elf- + $ make w400_defconfig + $ make Image creation -============== +-------------- Amlogic doesn't provide sources for the firmware and for tools needed to create the bootloader image, so it is necessary to obtain them from the git tree published by the board vendor: - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH - > git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot - > cd amlogic-u-boot - > make g12b_w400_v1_defconfig - > make - > export UBOOTDIR=$PWD +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot + $ cd amlogic-u-boot + $ make g12b_w400_v1_defconfig + $ make + $ export UBOOTDIR=$PWD Download the latest Amlogic Buildroot package, and extract it : - > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz - > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader - > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706 - > export FIPDIR=$BRDIR/bootloader/uboot-repo/fip + +.. code-block:: bash + + $ wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz + $ tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader + $ export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706 + $ export FIPDIR=$BRDIR/bootloader/uboot-repo/fip Go back to mainline U-Boot source tree then : - > mkdir fip - - > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ - > cp $UBOOTDIR/build/board/amlogic/g12b_w400_v1/firmware/acs.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12b/bl2.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12b/bl30.bin fip/ - > cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12b/bl31.img fip/ - > cp $FIPDIR/g12b/ddr3_1d.fw fip/ - > cp $FIPDIR/g12b/ddr4_1d.fw fip/ - > cp $FIPDIR/g12b/ddr4_2d.fw fip/ - > cp $FIPDIR/g12b/diag_lpddr4.fw fip/ - > cp $FIPDIR/g12b/lpddr4_1d.fw fip/ - > cp $FIPDIR/g12b/lpddr4_2d.fw fip/ - > cp $FIPDIR/g12b/piei.fw fip/ - > cp $FIPDIR/g12b/aml_ddr.fw fip/ - > cp u-boot.bin fip/bl33.bin - - > sh fip/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 - - > sh fip/blx_fix.sh \ - fip/bl2.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/acs.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - > $FIPDIR/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ - --output fip/bl30_new.bin.g12a.enc \ - --level v3 - > $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ - --output fip/bl30_new.bin.enc \ - --level v3 --type bl30 - > $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ - --output fip/bl31.img.enc \ - --level v3 --type bl31 - > $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ - --output fip/bl33.bin.enc \ - --level v3 --type bl33 - > $FIPDIR/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ - --output fip/bl2.n.bin.sig - > $FIPDIR/g12b/aml_encrypt_g12b --bootmk \ - --output fip/u-boot.bin \ - --bl2 fip/bl2.n.bin.sig \ - --bl30 fip/bl30_new.bin.enc \ - --bl31 fip/bl31.img.enc \ - --bl33 fip/bl33.bin.enc \ - --ddrfw1 fip/ddr4_1d.fw \ - --ddrfw2 fip/ddr4_2d.fw \ - --ddrfw3 fip/ddr3_1d.fw \ - --ddrfw4 fip/piei.fw \ - --ddrfw5 fip/lpddr4_1d.fw \ - --ddrfw6 fip/lpddr4_2d.fw \ - --ddrfw7 fip/diag_lpddr4.fw \ - --ddrfw8 fip/aml_ddr.fw \ - --level v3 + +.. code-block:: bash + + $ mkdir fip + + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/amlogic/g12b_w400_v1/firmware/acs.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12b/bl2.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12b/bl30.bin fip/ + $ cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12b/bl31.img fip/ + $ cp $FIPDIR/g12b/ddr3_1d.fw fip/ + $ cp $FIPDIR/g12b/ddr4_1d.fw fip/ + $ cp $FIPDIR/g12b/ddr4_2d.fw fip/ + $ cp $FIPDIR/g12b/diag_lpddr4.fw fip/ + $ cp $FIPDIR/g12b/lpddr4_1d.fw fip/ + $ cp $FIPDIR/g12b/lpddr4_2d.fw fip/ + $ cp $FIPDIR/g12b/piei.fw fip/ + $ cp $FIPDIR/g12b/aml_ddr.fw fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + $ $FIPDIR/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $FIPDIR/g12b/aml_encrypt_g12b --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --level v3 and then write the image to SD with: - > DEV=/dev/your_sd_device - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/index.rst b/doc/board/index.rst index 01b233f737..dc683f0acb 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -8,6 +8,7 @@ Board-specific doc actions/index AndesTech/index + amlogic/index atmel/index coreboot/index emulation/index -- 2.22.0 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 1/2] board: amlogic: move boards doc into doc/board/amlogic 2020-06-11 13:28 ` [PATCH 1/2] " Neil Armstrong @ 2020-06-12 10:55 ` Heinrich Schuchardt 2020-06-15 13:20 ` Neil Armstrong 2020-06-16 4:35 ` Anand Moon 1 sibling, 1 reply; 7+ messages in thread From: Heinrich Schuchardt @ 2020-06-12 10:55 UTC (permalink / raw) To: u-boot On 6/11/20 3:28 PM, Neil Armstrong wrote: > Move the natural text Amlogic board README files to doc/board/amlogic > into reStructuredText and : > - add reStructuredText markup for bash code > - fix secondary titles markup > - move board support into global support matrix > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Thanks for moving this to the HTML documentation. Please, add an SPDX license identifier to each file, e.g. .. SPDX-License-Identifier: GPL-2.0+ make htmldocs shows no problems Best regards Heinrich ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/2] board: amlogic: move boards doc into doc/board/amlogic 2020-06-12 10:55 ` Heinrich Schuchardt @ 2020-06-15 13:20 ` Neil Armstrong 0 siblings, 0 replies; 7+ messages in thread From: Neil Armstrong @ 2020-06-15 13:20 UTC (permalink / raw) To: u-boot Hi, On 12/06/2020 12:55, Heinrich Schuchardt wrote: > On 6/11/20 3:28 PM, Neil Armstrong wrote: >> Move the natural text Amlogic board README files to doc/board/amlogic >> into reStructuredText and : >> - add reStructuredText markup for bash code >> - fix secondary titles markup >> - move board support into global support matrix >> >> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > > Thanks for moving this to the HTML documentation. > > Please, add an SPDX license identifier to each file, e.g. > .. SPDX-License-Identifier: GPL-2.0+ Indeed, forgot this.. thanks ! Neil > > make htmldocs shows no problems > > Best regards > > Heinrich > ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/2] board: amlogic: move boards doc into doc/board/amlogic 2020-06-11 13:28 ` [PATCH 1/2] " Neil Armstrong 2020-06-12 10:55 ` Heinrich Schuchardt @ 2020-06-16 4:35 ` Anand Moon 2020-06-16 7:40 ` Neil Armstrong 1 sibling, 1 reply; 7+ messages in thread From: Anand Moon @ 2020-06-16 4:35 UTC (permalink / raw) To: u-boot Hi Neil, On Thu, 11 Jun 2020 at 19:20, Neil Armstrong <narmstrong@baylibre.com> wrote: > > Move the natural text Amlogic board README files to doc/board/amlogic > into reStructuredText and : > - add reStructuredText markup for bash code > - fix secondary titles markup > - move board support into global support matrix > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Can you also update the following information for flashing u-boot image for eMMC # Binaries should be available in fip directory : fip/ | ... |------ u-boot.bin (for eMMC) |------ u-boot.bin.sd.bin (for SDCard) And the following for eMMC [0] https://github.com/BayLibre/u-boot/tree/readme#install-on-emmc So that it's clear which image should be used for particular booting device. -Anand > --- > doc/board/amlogic/index.rst | 95 +++++++++ > .../board/amlogic/khadas-vim.rst | 138 +++++++------ > .../board/amlogic/khadas-vim2.rst | 138 ++++++------- > .../board/amlogic/khadas-vim3.rst | 189 +++++++++-------- > .../board/amlogic/khadas-vim3l.rst | 189 +++++++++-------- > .../board/amlogic/libretech-ac.rst | 142 ++++++------- > .../board/amlogic/libretech-cc.rst | 139 +++++++------ > .../board/amlogic/nanopi-k2.rst | 136 +++++++------ > .../board/amlogic/odroid-c2.rst | 50 +++-- > .../board/amlogic/odroid-n2.rst | 187 +++++++++-------- > .../README.p200 => doc/board/amlogic/p200.rst | 136 ++++++------- > .../README.p201 => doc/board/amlogic/p201.rst | 136 ++++++------- > .../README.p212 => doc/board/amlogic/p212.rst | 136 ++++++------- > .../README.q200 => doc/board/amlogic/q200.rst | 136 ++++++------- > .../s400/README => doc/board/amlogic/s400.rst | 150 +++++++------- > .../README => doc/board/amlogic/sei510.rst | 190 ++++++++--------- > .../README => doc/board/amlogic/sei610.rst | 185 +++++++++-------- > .../u200/README => doc/board/amlogic/u200.rst | 188 ++++++++--------- > .../README.w400 => doc/board/amlogic/w400.rst | 192 +++++++++--------- > doc/board/index.rst | 1 + > 20 files changed, 1484 insertions(+), 1369 deletions(-) > create mode 100644 doc/board/amlogic/index.rst > rename board/amlogic/p212/README.khadas-vim => doc/board/amlogic/khadas-vim.rst (24%) > rename board/amlogic/q200/README.khadas-vim2 => doc/board/amlogic/khadas-vim2.rst (26%) > rename board/amlogic/w400/README.khadas-vim3 => doc/board/amlogic/khadas-vim3.rst (20%) > rename board/amlogic/w400/README.khadas-vim3l => doc/board/amlogic/khadas-vim3l.rst (19%) > rename board/amlogic/p212/README.libretech-ac => doc/board/amlogic/libretech-ac.rst (21%) > rename board/amlogic/p212/README.libretech-cc => doc/board/amlogic/libretech-cc.rst (46%) > rename board/amlogic/p200/README.nanopi-k2 => doc/board/amlogic/nanopi-k2.rst (24%) > rename board/amlogic/p200/README.odroid-c2 => doc/board/amlogic/odroid-c2.rst (56%) > rename board/amlogic/w400/README.odroid-n2 => doc/board/amlogic/odroid-n2.rst (19%) > rename board/amlogic/p200/README.p200 => doc/board/amlogic/p200.rst (24%) > rename board/amlogic/p201/README.p201 => doc/board/amlogic/p201.rst (24%) > rename board/amlogic/p212/README.p212 => doc/board/amlogic/p212.rst (24%) > rename board/amlogic/q200/README.q200 => doc/board/amlogic/q200.rst (24%) > rename board/amlogic/s400/README => doc/board/amlogic/s400.rst (21%) > rename board/amlogic/sei510/README => doc/board/amlogic/sei510.rst (14%) > rename board/amlogic/sei610/README => doc/board/amlogic/sei610.rst (16%) > rename board/amlogic/u200/README => doc/board/amlogic/u200.rst (17%) > rename board/amlogic/w400/README.w400 => doc/board/amlogic/w400.rst (17%) > > diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst > new file mode 100644 > index 0000000000..3730419167 > --- /dev/null > +++ b/doc/board/amlogic/index.rst > @@ -0,0 +1,95 @@ > +.. SPDX-License-Identifier: GPL-2.0+ > + > +Amlogic > +======= > + > +Hardware Support Matrix > +----------------------- > + > +An up-do-date matrix is also available on: http://linux-meson.com > + > +This matrix concerns the actual source code version. > + > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| | S905 | S905X | S912 | A113X | S905X2 | S922X | S905X3 | > +| | | S805X | S905D | | S905D2 | A311D | S905D3 | > +| | | | | | S905Y2 | | | > ++===============================+===========+==============+==============+============+============+=============+==============+ > +| Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 | > +| | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L | > +| | P200 | LibreTech-CC | | | | | | > +| | P201 | LibreTech-AC | | | | | | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| Pinctrl/GPIO | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| Clock Control | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| PWM | No | No | No | No | No | No | No | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| Reset Control | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| Infrared Decoder | No | No | No | No | No | No | No | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| Ethernet | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| Multi-core | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| Fuse access | **Yes** | **Yes** |**Yes** |**Yes** |**Yes** |**Yes** | **Yes** | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| SPI (FC) | **Yes** | **Yes** | **Yes** | **Yes** |**Yes** | **Yes** | No | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| SPI (CC) | No | No | No | No | No | No | No | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| I2C | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| USB | **Yes** | **Yes** | **Yes** | No | **Yes** | **Yes** | **Yes** | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| USB OTG | No | **Yes** | **Yes** | No | **Yes** | **Yes** | **Yes** | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| eMMC | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| SDCard | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| NAND | No | No | No | No | No | No | No | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| ADC | **Yes** | **Yes** | **Yes** | No | No | No | No | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| CVBS Output | **Yes** | **Yes** | **Yes** | *N/A* | **Yes** | **Yes** | **Yes** | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| HDMI Output | **Yes** | **Yes** | **Yes** | *N/A* | **Yes** | **Yes** | **Yes** | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| CEC | No | No | No | *N/A* | No | No | No | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| Thermal Sensor | No | No | No | No | No | No | No | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| LCD/LVDS Output | No | *N/A* | No | No | No | No | No | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > +| SoC (version) information | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | > ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > + > +Board Documentation > +------------------- > + > +.. toctree:: > + :maxdepth: 1 > + > + khadas-vim2 > + khadas-vim3l > + khadas-vim3 > + khadas-vim > + libretech-ac > + libretech-cc > + nanopi-k2 > + odroid-c2 > + odroid-n2 > + p200 > + p201 > + p212 > + q200 > + s400 > + sei510 > + sei610 > + u200 > + w400 > diff --git a/board/amlogic/p212/README.khadas-vim b/doc/board/amlogic/khadas-vim.rst > similarity index 24% > rename from board/amlogic/p212/README.khadas-vim > rename to doc/board/amlogic/khadas-vim.rst > index ccf933861b..397382c375 100644 > --- a/board/amlogic/p212/README.khadas-vim > +++ b/doc/board/amlogic/khadas-vim.rst > @@ -1,5 +1,5 @@ > U-Boot for Khadas VIM > -======================= > +====================== > > Khadas VIM is an Open Source DIY Box manufactured by Shenzhen Wesion > Technology Co., Ltd with the following specifications: > @@ -16,86 +16,84 @@ Technology Co., Ltd with the following specifications: > - SDIO Wifi Module, Bluetooth > - Two channels IR receiver > > -Currently the u-boot port supports the following devices: > - - serial > - - eMMC, microSD > - - Ethernet > - - I2C > - - Regulators > - - Reset controller > - - Clock controller > - - USB Host > - - ADC > - > U-Boot compilation > -================== > +------------------ > + > +.. code-block:: bash > > - > export CROSS_COMPILE=aarch64-none-elf- > - > make khadas-vim_defconfig > - > make > + $ export CROSS_COMPILE=aarch64-none-elf- > + $ make khadas-vim_defconfig > + $ make > > Image creation > -============== > +-------------- > > Amlogic doesn't provide sources for the firmware and for tools needed > to create the bootloader image, so it is necessary to obtain them from > the git tree published by the board vendor: > > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > - > git clone https://github.com/khadas/u-boot -b Vim vim-u-boot > - > cd vim-u-boot > - > make kvim_defconfig > - > make CROSS_COMPILE=aarch64-none-elf- > - > export FIPDIR=$PWD/fip > +.. code-block:: bash > + > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > + $ git clone https://github.com/khadas/u-boot -b Vim vim-u-boot > + $ cd vim-u-boot > + $ make kvim_defconfig > + $ make CROSS_COMPILE=aarch64-none-elf- > + $ export FIPDIR=$PWD/fip > > Go back to mainline U-Boot source tree then : > - > mkdir fip > - > - > cp $FIPDIR/gxl/bl2.bin fip/ > - > cp $FIPDIR/gxl/acs.bin fip/ > - > cp $FIPDIR/gxl/bl21.bin fip/ > - > cp $FIPDIR/gxl/bl30.bin fip/ > - > cp $FIPDIR/gxl/bl301.bin fip/ > - > cp $FIPDIR/gxl/bl31.img fip/ > - > cp u-boot.bin fip/bl33.bin > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl30.bin \ > - fip/zero_tmp \ > - fip/bl30_zero.bin \ > - fip/bl301.bin \ > - fip/bl301_zero.bin \ > - fip/bl30_new.bin \ > - bl30 > - > - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl2_acs.bin \ > - fip/zero_tmp \ > - fip/bl2_zero.bin \ > - fip/bl21.bin \ > - fip/bl21_zero.bin \ > - fip/bl2_new.bin \ > - bl2 > - > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig > - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ > - --output fip/u-boot.bin \ > - --bl2 fip/bl2.n.bin.sig \ > - --bl30 fip/bl30_new.bin.enc \ > - --bl31 fip/bl31.img.enc \ > - --bl33 fip/bl33.bin.enc > + > +.. code-block:: bash > + > + $ mkdir fip > + > + $ cp $FIPDIR/gxl/bl2.bin fip/ > + $ cp $FIPDIR/gxl/acs.bin fip/ > + $ cp $FIPDIR/gxl/bl21.bin fip/ > + $ cp $FIPDIR/gxl/bl30.bin fip/ > + $ cp $FIPDIR/gxl/bl301.bin fip/ > + $ cp $FIPDIR/gxl/bl31.img fip/ > + $ cp u-boot.bin fip/bl33.bin > + > + $ $FIPDIR/blx_fix.sh \ > + fip/bl30.bin \ > + fip/zero_tmp \ > + fip/bl30_zero.bin \ > + fip/bl301.bin \ > + fip/bl301_zero.bin \ > + fip/bl30_new.bin \ > + bl30 > + > + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > + > + $ $FIPDIR/blx_fix.sh \ > + fip/bl2_acs.bin \ > + fip/zero_tmp \ > + fip/bl2_zero.bin \ > + fip/bl21.bin \ > + fip/bl21_zero.bin \ > + fip/bl2_new.bin \ > + bl2 > + > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig > + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ > + --output fip/u-boot.bin \ > + --bl2 fip/bl2.n.bin.sig \ > + --bl30 fip/bl30_new.bin.enc \ > + --bl31 fip/bl31.img.enc \ > + --bl33 fip/bl33.bin.enc > > and then write the image to SD with: > > - > DEV=/dev/your_sd_device > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > +.. code-block:: bash > + > + $ DEV=/dev/your_sd_device > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > diff --git a/board/amlogic/q200/README.khadas-vim2 b/doc/board/amlogic/khadas-vim2.rst > similarity index 26% > rename from board/amlogic/q200/README.khadas-vim2 > rename to doc/board/amlogic/khadas-vim2.rst > index 595998c4fa..c57d96d8b0 100644 > --- a/board/amlogic/q200/README.khadas-vim2 > +++ b/doc/board/amlogic/khadas-vim2.rst > @@ -1,3 +1,5 @@ > +.. SPDX-License-Identifier: GPL-2.0+ > + > U-Boot for Khadas VIM2 > ======================= > > @@ -17,86 +19,84 @@ Technology Co., Ltd with the following specifications: > - SDIO Wifi Module, Bluetooth > - Two channels IR receiver > > -Currently the u-boot port supports the following devices: > - - serial > - - eMMC, microSD > - - Ethernet > - - I2C > - - Regulators > - - Reset controller > - - Clock controller > - - USB Host > - - ADC > - > U-Boot compilation > -================== > +------------------ > + > +.. code-block:: bash > > - > export CROSS_COMPILE=aarch64-none-elf- > - > make khadas-vim2_defconfig > - > make > + $ export CROSS_COMPILE=aarch64-none-elf- > + $ make khadas-vim2_defconfig > + $ make > > Image creation > -============== > +-------------- > > Amlogic doesn't provide sources for the firmware and for tools needed > to create the bootloader image, so it is necessary to obtain them from > the git tree published by the board vendor: > > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > - > git clone https://github.com/khadas/u-boot -b khadas-vim-v2015.01 vim-u-boot > - > cd vim-u-boot > - > make kvim2_defconfig > - > make > - > export FIPDIR=$PWD/fip > +.. code-block:: bash > + > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > + $ git clone https://github.com/khadas/u-boot -b khadas-vim-v2015.01 vim-u-boot > + $ cd vim-u-boot > + $ make kvim2_defconfig > + $ make > + $ export FIPDIR=$PWD/fip > > Go back to mainline U-Boot source tree then : > - > mkdir fip > - > - > cp $FIPDIR/gxl/bl2.bin fip/ > - > cp $FIPDIR/gxl/acs.bin fip/ > - > cp $FIPDIR/gxl/bl21.bin fip/ > - > cp $FIPDIR/gxl/bl30.bin fip/ > - > cp $FIPDIR/gxl/bl301.bin fip/ > - > cp $FIPDIR/gxl/bl31.img fip/ > - > cp u-boot.bin fip/bl33.bin > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl30.bin \ > - fip/zero_tmp \ > - fip/bl30_zero.bin \ > - fip/bl301.bin \ > - fip/bl301_zero.bin \ > - fip/bl30_new.bin \ > - bl30 > - > - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl2_acs.bin \ > - fip/zero_tmp \ > - fip/bl2_zero.bin \ > - fip/bl21.bin \ > - fip/bl21_zero.bin \ > - fip/bl2_new.bin \ > - bl2 > - > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig > - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ > - --output fip/u-boot.bin \ > - --bl2 fip/bl2.n.bin.sig \ > - --bl30 fip/bl30_new.bin.enc \ > - --bl31 fip/bl31.img.enc \ > - --bl33 fip/bl33.bin.enc > + > +.. code-block:: bash > + > + $ mkdir fip > + > + $ cp $FIPDIR/gxl/bl2.bin fip/ > + $ cp $FIPDIR/gxl/acs.bin fip/ > + $ cp $FIPDIR/gxl/bl21.bin fip/ > + $ cp $FIPDIR/gxl/bl30.bin fip/ > + $ cp $FIPDIR/gxl/bl301.bin fip/ > + $ cp $FIPDIR/gxl/bl31.img fip/ > + $ cp u-boot.bin fip/bl33.bin > + > + $ $FIPDIR/blx_fix.sh \ > + fip/bl30.bin \ > + fip/zero_tmp \ > + fip/bl30_zero.bin \ > + fip/bl301.bin \ > + fip/bl301_zero.bin \ > + fip/bl30_new.bin \ > + bl30 > + > + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > + > + $ $FIPDIR/blx_fix.sh \ > + fip/bl2_acs.bin \ > + fip/zero_tmp \ > + fip/bl2_zero.bin \ > + fip/bl21.bin \ > + fip/bl21_zero.bin \ > + fip/bl2_new.bin \ > + bl2 > + > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig > + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ > + --output fip/u-boot.bin \ > + --bl2 fip/bl2.n.bin.sig \ > + --bl30 fip/bl30_new.bin.enc \ > + --bl31 fip/bl31.img.enc \ > + --bl33 fip/bl33.bin.enc > > and then write the image to SD with: > > - > DEV=/dev/your_sd_device > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > +.. code-block:: bash > + > + $ DEV=/dev/your_sd_device > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > diff --git a/board/amlogic/w400/README.khadas-vim3 b/doc/board/amlogic/khadas-vim3.rst > similarity index 20% > rename from board/amlogic/w400/README.khadas-vim3 > rename to doc/board/amlogic/khadas-vim3.rst > index 399bf49295..161ccc3ca3 100644 > --- a/board/amlogic/w400/README.khadas-vim3 > +++ b/doc/board/amlogic/khadas-vim3.rst > @@ -16,116 +16,115 @@ Technology Co., Ltd. with the following specifications: > > Schematics are available on the manufacturer website. > > -Currently the U-Boot port supports the following devices: > - - serial > - - eMMC, microSD > - - Ethernet > - - I2C > - - Regulators > - - Reset controller > - - Clock controller > - - ADC > +U-Boot compilation > +------------------ > > -u-boot compilation > -================== > +.. code-block:: bash > > - > export CROSS_COMPILE=aarch64-none-elf- > - > make khadas-vim3_defconfig > - > make > + $ export CROSS_COMPILE=aarch64-none-elf- > + $ make khadas-vim3_defconfig > + $ make > > Image creation > -============== > +-------------- > > Amlogic doesn't provide sources for the firmware and for tools needed > to create the bootloader image, so it is necessary to obtain them from > the git tree published by the board vendor: > > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > +.. code-block:: bash > + > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > > - > DIR=vim3-u-boot > - > git clone --depth 1 \ > + $ DIR=vim3-u-boot > + $ git clone --depth 1 \ > https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \ > $DIR > > - > cd vim3-u-boot > - > make kvim3_defconfig > - > make > - > export UBOOTDIR=$PWD > + $ cd vim3-u-boot > + $ make kvim3_defconfig > + $ make > + $ export UBOOTDIR=$PWD > > Go back to mainline U-Boot source tree then : > - > mkdir fip > - > - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ > - > cp $UBOOTDIR/build/board/khadas/kvim3/firmware/acs.bin fip/ > - > cp $UBOOTDIR/fip/g12b/bl2.bin fip/ > - > cp $UBOOTDIR/fip/g12b/bl30.bin fip/ > - > cp $UBOOTDIR/fip/g12b/bl31.img fip/ > - > cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ > - > cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ > - > cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ > - > cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ > - > cp $UBOOTDIR/fip/g12b/lpddr3_1d.fw fip/ > - > cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ > - > cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ > - > cp $UBOOTDIR/fip/g12b/piei.fw fip/ > - > cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ > - > cp u-boot.bin fip/bl33.bin > - > - > sh fip/blx_fix.sh \ > - fip/bl30.bin \ > - fip/zero_tmp \ > - fip/bl30_zero.bin \ > - fip/bl301.bin \ > - fip/bl301_zero.bin \ > - fip/bl30_new.bin \ > - bl30 > - > - > sh fip/blx_fix.sh \ > - fip/bl2.bin \ > - fip/zero_tmp \ > - fip/bl2_zero.bin \ > - fip/acs.bin \ > - fip/bl21_zero.bin \ > - fip/bl2_new.bin \ > - bl2 > - > - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ > - --output fip/bl30_new.bin.g12a.enc \ > - --level v3 > - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ > - --output fip/bl30_new.bin.enc \ > - --level v3 --type bl30 > - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ > - --output fip/bl31.img.enc \ > - --level v3 --type bl31 > - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ > - --output fip/bl33.bin.enc \ > - --level v3 --type bl33 --compress lz4 > - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ > - --output fip/bl2.n.bin.sig > - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ > - --output fip/u-boot.bin \ > - --bl2 fip/bl2.n.bin.sig \ > - --bl30 fip/bl30_new.bin.enc \ > - --bl31 fip/bl31.img.enc \ > - --bl33 fip/bl33.bin.enc \ > - --ddrfw1 fip/ddr4_1d.fw \ > - --ddrfw2 fip/ddr4_2d.fw \ > - --ddrfw3 fip/ddr3_1d.fw \ > - --ddrfw4 fip/piei.fw \ > - --ddrfw5 fip/lpddr4_1d.fw \ > - --ddrfw6 fip/lpddr4_2d.fw \ > - --ddrfw7 fip/diag_lpddr4.fw \ > - --ddrfw8 fip/aml_ddr.fw \ > - --ddrfw9 fip/lpddr3_1d.fw \ > - --level v3 > + > +.. code-block:: bash > + > + $ mkdir fip > + > + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ > + $ cp $UBOOTDIR/build/board/khadas/kvim3/firmware/acs.bin fip/ > + $ cp $UBOOTDIR/fip/g12b/bl2.bin fip/ > + $ cp $UBOOTDIR/fip/g12b/bl30.bin fip/ > + $ cp $UBOOTDIR/fip/g12b/bl31.img fip/ > + $ cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ > + $ cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ > + $ cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ > + $ cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ > + $ cp $UBOOTDIR/fip/g12b/lpddr3_1d.fw fip/ > + $ cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ > + $ cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ > + $ cp $UBOOTDIR/fip/g12b/piei.fw fip/ > + $ cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ > + $ cp u-boot.bin fip/bl33.bin > + > + $ sh fip/blx_fix.sh \ > + fip/bl30.bin \ > + fip/zero_tmp \ > + fip/bl30_zero.bin \ > + fip/bl301.bin \ > + fip/bl301_zero.bin \ > + fip/bl30_new.bin \ > + bl30 > + > + $ sh fip/blx_fix.sh \ > + fip/bl2.bin \ > + fip/zero_tmp \ > + fip/bl2_zero.bin \ > + fip/acs.bin \ > + fip/bl21_zero.bin \ > + fip/bl2_new.bin \ > + bl2 > + > + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ > + --output fip/bl30_new.bin.g12a.enc \ > + --level v3 > + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ > + --output fip/bl30_new.bin.enc \ > + --level v3 --type bl30 > + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ > + --output fip/bl31.img.enc \ > + --level v3 --type bl31 > + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ > + --output fip/bl33.bin.enc \ > + --level v3 --type bl33 --compress lz4 > + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ > + --output fip/bl2.n.bin.sig > + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ > + --output fip/u-boot.bin \ > + --bl2 fip/bl2.n.bin.sig \ > + --bl30 fip/bl30_new.bin.enc \ > + --bl31 fip/bl31.img.enc \ > + --bl33 fip/bl33.bin.enc \ > + --ddrfw1 fip/ddr4_1d.fw \ > + --ddrfw2 fip/ddr4_2d.fw \ > + --ddrfw3 fip/ddr3_1d.fw \ > + --ddrfw4 fip/piei.fw \ > + --ddrfw5 fip/lpddr4_1d.fw \ > + --ddrfw6 fip/lpddr4_2d.fw \ > + --ddrfw7 fip/diag_lpddr4.fw \ > + --ddrfw8 fip/aml_ddr.fw \ > + --ddrfw9 fip/lpddr3_1d.fw \ > + --level v3 > > and then write the image to SD with: > > - > DEV=/dev/your_sd_device > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > +.. code-block:: bash > + > + $ DEV=/dev/your_sd_device > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > diff --git a/board/amlogic/w400/README.khadas-vim3l b/doc/board/amlogic/khadas-vim3l.rst > similarity index 19% > rename from board/amlogic/w400/README.khadas-vim3l > rename to doc/board/amlogic/khadas-vim3l.rst > index b2d9abbfd9..9368359d5b 100644 > --- a/board/amlogic/w400/README.khadas-vim3l > +++ b/doc/board/amlogic/khadas-vim3l.rst > @@ -16,116 +16,113 @@ Technology Co., Ltd. with the following specifications: > > Schematics are available on the manufacturer website. > > -Currently the U-Boot port supports the following devices: > - - serial > - - eMMC, microSD > - - Ethernet > - - I2C > - - Regulators > - - Reset controller > - - Clock controller > - - ADC > - > -u-boot compilation > -================== > +U-Boot compilation > +------------------ > > - > export CROSS_COMPILE=aarch64-none-elf- > - > make khadas-vim3l_defconfig > - > make > + $ export CROSS_COMPILE=aarch64-none-elf- > + $ make khadas-vim3l_defconfig > + $ make > > Image creation > -============== > +-------------- > > Amlogic doesn't provide sources for the firmware and for tools needed > to create the bootloader image, so it is necessary to obtain them from > the git tree published by the board vendor: > > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > +.. code-block:: bash > + > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > > - > DIR=vim3l-u-boot > - > git clone --depth 1 \ > + $ DIR=vim3l-u-boot > + $ git clone --depth 1 \ > https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \ > $DIR > > - > cd vim3l-u-boot > - > make kvim3l_defconfig > - > make > - > export UBOOTDIR=$PWD > + $ cd vim3l-u-boot > + $ make kvim3l_defconfig > + $ make > + $ export UBOOTDIR=$PWD > > Go back to mainline U-Boot source tree then : > - > mkdir fip > - > - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ > - > cp $UBOOTDIR/build/board/khadas/kvim3l/firmware/acs.bin fip/ > - > cp $UBOOTDIR/fip/g12a/bl2.bin fip/ > - > cp $UBOOTDIR/fip/g12a/bl30.bin fip/ > - > cp $UBOOTDIR/fip/g12a/bl31.img fip/ > - > cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/ > - > cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/ > - > cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/ > - > cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/ > - > cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/ > - > cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/ > - > cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/ > - > cp $UBOOTDIR/fip/g12a/piei.fw fip/ > - > cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/ > - > cp u-boot.bin fip/bl33.bin > - > - > sh fip/blx_fix.sh \ > - fip/bl30.bin \ > - fip/zero_tmp \ > - fip/bl30_zero.bin \ > - fip/bl301.bin \ > - fip/bl301_zero.bin \ > - fip/bl30_new.bin \ > - bl30 > - > - > sh fip/blx_fix.sh \ > - fip/bl2.bin \ > - fip/zero_tmp \ > - fip/bl2_zero.bin \ > - fip/acs.bin \ > - fip/bl21_zero.bin \ > - fip/bl2_new.bin \ > - bl2 > - > - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ > - --output fip/bl30_new.bin.g12a.enc \ > - --level v3 > - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ > - --output fip/bl30_new.bin.enc \ > - --level v3 --type bl30 > - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ > - --output fip/bl31.img.enc \ > - --level v3 --type bl31 > - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ > - --output fip/bl33.bin.enc \ > - --level v3 --type bl33 --compress lz4 > - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ > - --output fip/bl2.n.bin.sig > - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \ > - --output fip/u-boot.bin \ > - --bl2 fip/bl2.n.bin.sig \ > - --bl30 fip/bl30_new.bin.enc \ > - --bl31 fip/bl31.img.enc \ > - --bl33 fip/bl33.bin.enc \ > - --ddrfw1 fip/ddr4_1d.fw \ > - --ddrfw2 fip/ddr4_2d.fw \ > - --ddrfw3 fip/ddr3_1d.fw \ > - --ddrfw4 fip/piei.fw \ > - --ddrfw5 fip/lpddr4_1d.fw \ > - --ddrfw6 fip/lpddr4_2d.fw \ > - --ddrfw7 fip/diag_lpddr4.fw \ > - --ddrfw8 fip/aml_ddr.fw \ > - --ddrfw9 fip/lpddr3_1d.fw \ > - --level v3 > + > +.. code-block:: bash > + > + $ mkdir fip > + > + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ > + $ cp $UBOOTDIR/build/board/khadas/kvim3l/firmware/acs.bin fip/ > + $ cp $UBOOTDIR/fip/g12a/bl2.bin fip/ > + $ cp $UBOOTDIR/fip/g12a/bl30.bin fip/ > + $ cp $UBOOTDIR/fip/g12a/bl31.img fip/ > + $ cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/ > + $ cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/ > + $ cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/ > + $ cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/ > + $ cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/ > + $ cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/ > + $ cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/ > + $ cp $UBOOTDIR/fip/g12a/piei.fw fip/ > + $ cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/ > + $ cp u-boot.bin fip/bl33.bin > + > + $ sh fip/blx_fix.sh \ > + fip/bl30.bin \ > + fip/zero_tmp \ > + fip/bl30_zero.bin \ > + fip/bl301.bin \ > + fip/bl301_zero.bin \ > + fip/bl30_new.bin \ > + bl30 > + > + $ sh fip/blx_fix.sh \ > + fip/bl2.bin \ > + fip/zero_tmp \ > + fip/bl2_zero.bin \ > + fip/acs.bin \ > + fip/bl21_zero.bin \ > + fip/bl2_new.bin \ > + bl2 > + > + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ > + --output fip/bl30_new.bin.g12a.enc \ > + --level v3 > + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ > + --output fip/bl30_new.bin.enc \ > + --level v3 --type bl30 > + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ > + --output fip/bl31.img.enc \ > + --level v3 --type bl31 > + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ > + --output fip/bl33.bin.enc \ > + --level v3 --type bl33 --compress lz4 > + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ > + --output fip/bl2.n.bin.sig > + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \ > + --output fip/u-boot.bin \ > + --bl2 fip/bl2.n.bin.sig \ > + --bl30 fip/bl30_new.bin.enc \ > + --bl31 fip/bl31.img.enc \ > + --bl33 fip/bl33.bin.enc \ > + --ddrfw1 fip/ddr4_1d.fw \ > + --ddrfw2 fip/ddr4_2d.fw \ > + --ddrfw3 fip/ddr3_1d.fw \ > + --ddrfw4 fip/piei.fw \ > + --ddrfw5 fip/lpddr4_1d.fw \ > + --ddrfw6 fip/lpddr4_2d.fw \ > + --ddrfw7 fip/diag_lpddr4.fw \ > + --ddrfw8 fip/aml_ddr.fw \ > + --ddrfw9 fip/lpddr3_1d.fw \ > + --level v3 > > and then write the image to SD with: > > - > DEV=/dev/your_sd_device > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > +.. code-block:: bash > + > + $ DEV=/dev/your_sd_device > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > diff --git a/board/amlogic/p212/README.libretech-ac b/doc/board/amlogic/libretech-ac.rst > similarity index 21% > rename from board/amlogic/p212/README.libretech-ac > rename to doc/board/amlogic/libretech-ac.rst > index 3f713ec326..31fe4985e7 100644 > --- a/board/amlogic/p212/README.libretech-ac > +++ b/doc/board/amlogic/libretech-ac.rst > @@ -16,87 +16,93 @@ with the following specifications: > > Schematics are available on the manufacturer website. > > -Currently the U-Boot port supports the following devices: > - - serial > - - eMMC > - - Ethernet > - - USB > - > U-Boot compilation > -================== > +------------------ > + > +.. code-block:: bash > > - > export CROSS_COMPILE=aarch64-none-elf- > - > make libretech-ac_defconfig > - > make > + $ export CROSS_COMPILE=aarch64-none-elf- > + $ make libretech-ac_defconfig > + $ make > > Image creation > -============== > +-------------- > > Amlogic doesn't provide sources for the firmware and for tools needed > to create the bootloader image, so it is necessary to obtain them from > the git tree published by the board vendor: > > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > - > git clone https://github.com/BayLibre/u-boot.git -b libretech-ac amlogic-u-boot > - > cd amlogic-u-boot > - > wget https://raw.githubusercontent.com/BayLibre/u-boot/libretech-cc/fip/blx_fix.sh > - > make libretech_ac_defconfig > - > make > - > export UBOOTDIR=$PWD > +.. code-block:: bash > + > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > + $ git clone https://github.com/BayLibre/u-boot.git -b libretech-ac amlogic-u-boot > + $ cd amlogic-u-boot > + $ wget https://raw.githubusercontent.com/BayLibre/u-boot/libretech-cc/fip/blx_fix.sh > + $ make libretech_ac_defconfig > + $ make > + $ export UBOOTDIR=$PWD > > Download the latest Amlogic Buildroot package, and extract it : > - > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz > - > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180418/bootloader > - > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180418 > + > +.. code-block:: bash > + > + $ wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz > + $ tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180418/bootloader > + $ export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180418 > > Go back to mainline U-Boot source tree then : > - > mkdir fip > - > - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ > - > cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/bl21.bin fip/ > - > cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/acs.bin fip/ > - > cp $BRDIR/bootloader/uboot-repo/bl2/bin/gxl/bl2.bin fip/ > - > cp $BRDIR/bootloader/uboot-repo/bl30/bin/gxl/bl30.bin fip/ > - > cp $BRDIR/bootloader/uboot-repo/bl31/bin/gxl/bl31.img fip/ > - > cp u-boot.bin fip/bl33.bin > - > - > sh $UBOOTDIR/blx_fix.sh \ > - fip/bl30.bin \ > - fip/zero_tmp \ > - fip/bl30_zero.bin \ > - fip/bl301.bin \ > - fip/bl301_zero.bin \ > - fip/bl30_new.bin \ > - bl30 > - > - > $BRDIR/bootloader/uboot-repo/fip/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > - > - > sh $UBOOTDIR/blx_fix.sh \ > - fip/bl2_acs.bin \ > - fip/zero_tmp \ > - fip/bl2_zero.bin \ > - fip/bl21.bin \ > - fip/bl21_zero.bin \ > - fip/bl2_new.bin \ > - bl2 > - > - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig > - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bootmk \ > - --output fip/u-boot.bin \ > - --bl2 fip/bl2.n.bin.sig \ > - --bl30 fip/bl30_new.bin.enc \ > - --bl31 fip/bl31.img.enc \ > - --bl33 fip/bl33.bin.enc > + > +.. code-block:: bash > + > + $ mkdir fip > + > + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ > + $ cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/bl21.bin fip/ > + $ cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/acs.bin fip/ > + $ cp $BRDIR/bootloader/uboot-repo/bl2/bin/gxl/bl2.bin fip/ > + $ cp $BRDIR/bootloader/uboot-repo/bl30/bin/gxl/bl30.bin fip/ > + $ cp $BRDIR/bootloader/uboot-repo/bl31/bin/gxl/bl31.img fip/ > + $ cp u-boot.bin fip/bl33.bin > + > + $ sh $UBOOTDIR/blx_fix.sh \ > + fip/bl30.bin \ > + fip/zero_tmp \ > + fip/bl30_zero.bin \ > + fip/bl301.bin \ > + fip/bl301_zero.bin \ > + fip/bl30_new.bin \ > + bl30 > + > + $ $BRDIR/bootloader/uboot-repo/fip/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > + > + $ sh $UBOOTDIR/blx_fix.sh \ > + fip/bl2_acs.bin \ > + fip/zero_tmp \ > + fip/bl2_zero.bin \ > + fip/bl21.bin \ > + fip/bl21_zero.bin \ > + fip/bl2_new.bin \ > + bl2 > + > + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig > + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bootmk \ > + --output fip/u-boot.bin \ > + --bl2 fip/bl2.n.bin.sig \ > + --bl30 fip/bl30_new.bin.enc \ > + --bl31 fip/bl31.img.enc \ > + --bl33 fip/bl33.bin.enc > > and then write the image to SD with: > > - > DEV=/dev/your_sd_device > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > +.. code-block:: bash > + > + $ DEV=/dev/your_sd_device > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > diff --git a/board/amlogic/p212/README.libretech-cc b/doc/board/amlogic/libretech-cc.rst > similarity index 46% > rename from board/amlogic/p212/README.libretech-cc > rename to doc/board/amlogic/libretech-cc.rst > index 74434d4435..5657f2c887 100644 > --- a/board/amlogic/p212/README.libretech-cc > +++ b/doc/board/amlogic/libretech-cc.rst > @@ -16,26 +16,17 @@ with the following specifications: > > Schematics are available on the manufacturer website. > > -Currently the U-Boot port supports the following devices: > - - serial > - - eMMC, microSD > - - Ethernet > - - I2C > - - Regulators > - - Reset controller > - - Clock controller > - - USB Host > - - ADC > - > U-Boot compilation > -================== > +------------------ > + > +.. code-block:: bash > > - > export CROSS_COMPILE=aarch64-none-elf- > - > make libretech-cc_defconfig > - > make > + $ export CROSS_COMPILE=aarch64-none-elf- > + $ make libretech-cc_defconfig > + $ make > > Image creation > -============== > +-------------- > > To boot the system, u-boot must be combined with several earlier stage > bootloaders: > @@ -53,74 +44,82 @@ for convenience at <https://github.com/BayLibre/u-boot/releases/> > Download and extract the libretech-cc release from there, and set FIPDIR to > point to the `fip` subdirectory. > > - > export FIPDIR=/path/to/extracted/fip > +.. code-block:: bash > + > + $ export FIPDIR=/path/to/extracted/fip > > Alternatively, you can obtain the original vendor u-boot tree which > contains the required blobs and sources, and build yourself. > Note that old compilers are required for this to build. The compilers here > are suggested by Amlogic, and they are 32-bit x86 binaries. > > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > - > git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot > - > cd amlogic-u-boot > - > make libretech_cc_defconfig > - > make > - > export FIPDIR=$PWD/fip > +.. code-block:: bash > + > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > + $ git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot > + $ cd amlogic-u-boot > + $ make libretech_cc_defconfig > + $ make > + $ export FIPDIR=$PWD/fip > > Once you have the binaries available (either through the prebuilt download, > or having built the vendor u-boot yourself), you can then proceed to glue > everything together. Go back to mainline U-Boot source tree then : > > - > mkdir fip > - > - > cp $FIPDIR/gxl/bl2.bin fip/ > - > cp $FIPDIR/gxl/acs.bin fip/ > - > cp $FIPDIR/gxl/bl21.bin fip/ > - > cp $FIPDIR/gxl/bl30.bin fip/ > - > cp $FIPDIR/gxl/bl301.bin fip/ > - > cp $FIPDIR/gxl/bl31.img fip/ > - > cp u-boot.bin fip/bl33.bin > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl30.bin \ > - fip/zero_tmp \ > - fip/bl30_zero.bin \ > - fip/bl301.bin \ > - fip/bl301_zero.bin \ > - fip/bl30_new.bin \ > - bl30 > - > - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl2_acs.bin \ > - fip/zero_tmp \ > - fip/bl2_zero.bin \ > - fip/bl21.bin \ > - fip/bl21_zero.bin \ > - fip/bl2_new.bin \ > - bl2 > - > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig > - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ > - --output fip/u-boot.bin \ > - --bl2 fip/bl2.n.bin.sig \ > - --bl30 fip/bl30_new.bin.enc \ > - --bl31 fip/bl31.img.enc \ > - --bl33 fip/bl33.bin.enc > +.. code-block:: bash > + > + $ mkdir fip > + > + $ cp $FIPDIR/gxl/bl2.bin fip/ > + $ cp $FIPDIR/gxl/acs.bin fip/ > + $ cp $FIPDIR/gxl/bl21.bin fip/ > + $ cp $FIPDIR/gxl/bl30.bin fip/ > + $ cp $FIPDIR/gxl/bl301.bin fip/ > + $ cp $FIPDIR/gxl/bl31.img fip/ > + $ cp u-boot.bin fip/bl33.bin > + > + $ $FIPDIR/blx_fix.sh \ > + fip/bl30.bin \ > + fip/zero_tmp \ > + fip/bl30_zero.bin \ > + fip/bl301.bin \ > + fip/bl301_zero.bin \ > + fip/bl30_new.bin \ > + bl30 > + > + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > + > + $ $FIPDIR/blx_fix.sh \ > + fip/bl2_acs.bin \ > + fip/zero_tmp \ > + fip/bl2_zero.bin \ > + fip/bl21.bin \ > + fip/bl21_zero.bin \ > + fip/bl2_new.bin \ > + bl2 > + > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig > + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ > + --output fip/u-boot.bin \ > + --bl2 fip/bl2.n.bin.sig \ > + --bl30 fip/bl30_new.bin.enc \ > + --bl31 fip/bl31.img.enc \ > + --bl33 fip/bl33.bin.enc > > and then write the image to SD with: > > - > DEV=/dev/your_sd_device > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > +.. code-block:: bash > + > + $ DEV=/dev/your_sd_device > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > > Note that Amlogic provides aml_encrypt_gxl as a 32-bit x86 binary with no > source code. Should you prefer to avoid that, there are open source reverse > diff --git a/board/amlogic/p200/README.nanopi-k2 b/doc/board/amlogic/nanopi-k2.rst > similarity index 24% > rename from board/amlogic/p200/README.nanopi-k2 > rename to doc/board/amlogic/nanopi-k2.rst > index c8dec3569b..b8147de61c 100644 > --- a/board/amlogic/p200/README.nanopi-k2 > +++ b/doc/board/amlogic/nanopi-k2.rst > @@ -16,83 +16,87 @@ with the following specifications: > > Schematics are available on the manufacturer website. > > -Currently the u-boot port supports the following devices: > - - serial > - - eMMC, microSD > - - Ethernet > +U-Boot compilation > +------------------ > > -u-boot compilation > -================== > +.. code-block:: bash > > - > export CROSS_COMPILE=aarch64-none-elf- > - > make nanopi-k2_defconfig > - > make > + $ export CROSS_COMPILE=aarch64-none-elf- > + $ make nanopi-k2_defconfig > + $ make > > Image creation > -============== > +-------------- > > Amlogic doesn't provide sources for the firmware and for tools needed > to create the bootloader image, so it is necessary to obtain them from > the git tree published by the board vendor: > > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > - > git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot > - > git clone https://github.com/friendlyarm/u-boot.git -b nanopi-k2-v2015.01 amlogic-u-boot > - > cd amlogic-u-boot > - > sed -i 's/aarch64-linux-gnu-/aarch64-none-elf-/' Makefile > - > sed -i 's/arm-linux-/arm-none-eabi-/' arch/arm/cpu/armv8/gxb/firmware/scp_task/Makefile > - > make nanopi-k2_defconfig > - > make > - > export FIPDIR=$PWD/fip > +.. code-block:: bash > + > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > + $ git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot > + $ git clone https://github.com/friendlyarm/u-boot.git -b nanopi-k2-v2015.01 amlogic-u-boot > + $ cd amlogic-u-boot > + $ sed -i 's/aarch64-linux-gnu-/aarch64-none-elf-/' Makefile > + $ sed -i 's/arm-linux-/arm-none-eabi-/' arch/arm/cpu/armv8/gxb/firmware/scp_task/Makefile > + $ make nanopi-k2_defconfig > + $ make > + $ export FIPDIR=$PWD/fip > > Go back to mainline U-Boot source tree then : > - > mkdir fip > - > - > cp $FIPDIR/gxb/bl2.bin fip/ > - > cp $FIPDIR/gxb/acs.bin fip/ > - > cp $FIPDIR/gxb/bl21.bin fip/ > - > cp $FIPDIR/gxb/bl30.bin fip/ > - > cp $FIPDIR/gxb/bl301.bin fip/ > - > cp $FIPDIR/gxb/bl31.img fip/ > - > cp u-boot.bin fip/bl33.bin > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl30.bin \ > - fip/zero_tmp \ > - fip/bl30_zero.bin \ > - fip/bl301.bin \ > - fip/bl301_zero.bin \ > - fip/bl30_new.bin \ > - bl30 > - > - > $FIPDIR/fip_create \ > - --bl30 fip/bl30_new.bin \ > - --bl31 fip/bl31.img \ > - --bl33 fip/bl33.bin \ > - fip/fip.bin > - > - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl2_acs.bin \ > - fip/zero_tmp \ > - fip/bl2_zero.bin \ > - fip/bl21.bin \ > - fip/bl21_zero.bin \ > - fip/bl2_new.bin \ > - bl2 > - > - > cat fip/bl2_new.bin fip/fip.bin > fip/boot_new.bin > - > - > $FIPDIR/gxb/aml_encrypt_gxb --bootsig \ > - --input fip/boot_new.bin > - --output fip/u-boot.bin > + > +.. code-block:: bash > + > + $ mkdir fip > + > + $ cp $FIPDIR/gxb/bl2.bin fip/ > + $ cp $FIPDIR/gxb/acs.bin fip/ > + $ cp $FIPDIR/gxb/bl21.bin fip/ > + $ cp $FIPDIR/gxb/bl30.bin fip/ > + $ cp $FIPDIR/gxb/bl301.bin fip/ > + $ cp $FIPDIR/gxb/bl31.img fip/ > + $ cp u-boot.bin fip/bl33.bin > + > + $ $FIPDIR/blx_fix.sh \ > + fip/bl30.bin \ > + fip/zero_tmp \ > + fip/bl30_zero.bin \ > + fip/bl301.bin \ > + fip/bl301_zero.bin \ > + fip/bl30_new.bin \ > + bl30 > + > + $ $FIPDIR/fip_create \ > + --bl30 fip/bl30_new.bin \ > + --bl31 fip/bl31.img \ > + --bl33 fip/bl33.bin \ > + fip/fip.bin > + > + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > + > + $ $FIPDIR/blx_fix.sh \ > + fip/bl2_acs.bin \ > + fip/zero_tmp \ > + fip/bl2_zero.bin \ > + fip/bl21.bin \ > + fip/bl21_zero.bin \ > + fip/bl2_new.bin \ > + bl2 > + > + $ cat fip/bl2_new.bin fip/fip.bin > fip/boot_new.bin > + > + $ $FIPDIR/gxb/aml_encrypt_gxb --bootsig \ > + --input fip/boot_new.bin > + --output fip/u-boot.bin > > and then write the image to SD with: > > - > DEV=/dev/your_sd_device > - > dd if=fip/u-boot.bin of=$DEV conv=fsync,notrunc bs=512 seek=1 > +.. code-block:: bash > + > + $ DEV=/dev/your_sd_device > + $ dd if=fip/u-boot.bin of=$DEV conv=fsync,notrunc bs=512 seek=1 > diff --git a/board/amlogic/p200/README.odroid-c2 b/doc/board/amlogic/odroid-c2.rst > similarity index 56% > rename from board/amlogic/p200/README.odroid-c2 > rename to doc/board/amlogic/odroid-c2.rst > index 3b9f80df29..7b518fc26a 100644 > --- a/board/amlogic/p200/README.odroid-c2 > +++ b/doc/board/amlogic/odroid-c2.rst > @@ -16,50 +16,46 @@ Co. Ltd with the following specifications: > > Schematics are available on the manufacturer website. > > -Currently the u-boot port supports the following devices: > - - serial > - - eMMC, microSD > - - Ethernet > - - I2C > - - Regulators > - - Reset controller > - - Clock controller > - - ADC > +U-Boot compilation > +------------------ > > -u-boot compilation > -================== > +.. code-block:: bash > > - > export CROSS_COMPILE=aarch64-none-elf- > - > make odroid-c2_defconfig > - > make > + $ export CROSS_COMPILE=aarch64-none-elf- > + $ make odroid-c2_defconfig > + $ make > > Image creation > -============== > +-------------- > > Amlogic doesn't provide sources for the firmware and for tools needed > to create the bootloader image, so it is necessary to obtain them from > the git tree published by the board vendor: > > - > DIR=odroid-c2 > - > git clone --depth 1 \ > +.. code-block:: bash > + > + $ DIR=odroid-c2 > + $ git clone --depth 1 \ > https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \ > $DIR > - > $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \ > + $ $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \ > --bl301 $DIR/fip/gxb/bl301.bin \ > --bl31 $DIR/fip/gxb/bl31.bin \ > --bl33 u-boot.bin \ > $DIR/fip.bin > - > $DIR/fip/fip_create --dump $DIR/fip.bin > - > cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin > - > $DIR/fip/gxb/aml_encrypt_gxb --bootsig \ > + $ $DIR/fip/fip_create --dump $DIR/fip.bin > + $ cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin > + $ $DIR/fip/gxb/aml_encrypt_gxb --bootsig \ > --input $DIR/boot_new.bin \ > --output $DIR/u-boot.img > - > dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96 > + $ dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96 > > and then write the image to SD with: > > - > DEV=/dev/your_sd_device > - > BL1=$DIR/sd_fuse/bl1.bin.hardkernel > - > dd if=$BL1 of=$DEV conv=fsync bs=1 count=442 > - > dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1 > - > dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97 > +.. code-block:: bash > + > + $ DEV=/dev/your_sd_device > + $ BL1=$DIR/sd_fuse/bl1.bin.hardkernel > + $ dd if=$BL1 of=$DEV conv=fsync bs=1 count=442 > + $ dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1 > + $ dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97 > diff --git a/board/amlogic/w400/README.odroid-n2 b/doc/board/amlogic/odroid-n2.rst > similarity index 19% > rename from board/amlogic/w400/README.odroid-n2 > rename to doc/board/amlogic/odroid-n2.rst > index 8142eebea0..b7b9cccfa8 100644 > --- a/board/amlogic/w400/README.odroid-n2 > +++ b/doc/board/amlogic/odroid-n2.rst > @@ -15,115 +15,114 @@ Co. Ltd with the following specifications: > > Schematics are available on the manufacturer website. > > -Currently the u-boot port supports the following devices: > - - serial > - - eMMC, microSD > - - Ethernet > - - I2C > - - Regulators > - - Reset controller > - - Clock controller > - - ADC > +U-Boot compilation > +------------------ > > -u-boot compilation > -================== > +.. code-block:: bash > > - > export CROSS_COMPILE=aarch64-none-elf- > - > make odroid-n2_defconfig > - > make > + $ export CROSS_COMPILE=aarch64-none-elf- > + $ make odroid-n2_defconfig > + $ make > > Image creation > -============== > +-------------- > > Amlogic doesn't provide sources for the firmware and for tools needed > to create the bootloader image, so it is necessary to obtain them from > the git tree published by the board vendor: > > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > +.. code-block:: bash > + > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > > - > DIR=odroid-n2 > - > git clone --depth 1 \ > + $ DIR=odroid-n2 > + $ git clone --depth 1 \ > https://github.com/hardkernel/u-boot.git -b odroidn2-v2015.01 \ > $DIR > > - > cd odroid-n2 > - > make odroidn2_defconfig > - > make > - > export UBOOTDIR=$PWD > + $ cd odroid-n2 > + $ make odroidn2_defconfig > + $ make > + $ export UBOOTDIR=$PWD > > Go back to mainline U-Boot source tree then : > - > mkdir fip > - > - > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh > - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ > - > cp $UBOOTDIR/build/board/hardkernel/odroidn2/firmware/acs.bin fip/ > - > cp $UBOOTDIR/fip/g12b/bl2.bin fip/ > - > cp $UBOOTDIR/fip/g12b/bl30.bin fip/ > - > cp $UBOOTDIR/fip/g12b/bl31.img fip/ > - > cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ > - > cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ > - > cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ > - > cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ > - > cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ > - > cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ > - > cp $UBOOTDIR/fip/g12b/piei.fw fip/ > - > cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ > - > cp u-boot.bin fip/bl33.bin > - > - > sh fip/blx_fix.sh \ > - fip/bl30.bin \ > - fip/zero_tmp \ > - fip/bl30_zero.bin \ > - fip/bl301.bin \ > - fip/bl301_zero.bin \ > - fip/bl30_new.bin \ > - bl30 > - > - > sh fip/blx_fix.sh \ > - fip/bl2.bin \ > - fip/zero_tmp \ > - fip/bl2_zero.bin \ > - fip/acs.bin \ > - fip/bl21_zero.bin \ > - fip/bl2_new.bin \ > - bl2 > - > - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ > - --output fip/bl30_new.bin.g12a.enc \ > - --level v3 > - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ > - --output fip/bl30_new.bin.enc \ > - --level v3 --type bl30 > - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ > - --output fip/bl31.img.enc \ > - --level v3 --type bl31 > - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ > - --output fip/bl33.bin.enc \ > - --level v3 --type bl33 --compress lz4 > - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ > - --output fip/bl2.n.bin.sig > - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ > - --output fip/u-boot.bin \ > - --bl2 fip/bl2.n.bin.sig \ > - --bl30 fip/bl30_new.bin.enc \ > - --bl31 fip/bl31.img.enc \ > - --bl33 fip/bl33.bin.enc \ > - --ddrfw1 fip/ddr4_1d.fw \ > - --ddrfw2 fip/ddr4_2d.fw \ > - --ddrfw3 fip/ddr3_1d.fw \ > - --ddrfw4 fip/piei.fw \ > - --ddrfw5 fip/lpddr4_1d.fw \ > - --ddrfw6 fip/lpddr4_2d.fw \ > - --ddrfw7 fip/diag_lpddr4.fw \ > - --ddrfw8 fip/aml_ddr.fw \ > - --level v3 > + > +.. code-block:: bash > + > + $ mkdir fip > + > + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh > + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ > + $ cp $UBOOTDIR/build/board/hardkernel/odroidn2/firmware/acs.bin fip/ > + $ cp $UBOOTDIR/fip/g12b/bl2.bin fip/ > + $ cp $UBOOTDIR/fip/g12b/bl30.bin fip/ > + $ cp $UBOOTDIR/fip/g12b/bl31.img fip/ > + $ cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ > + $ cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ > + $ cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ > + $ cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ > + $ cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ > + $ cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ > + $ cp $UBOOTDIR/fip/g12b/piei.fw fip/ > + $ cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ > + $ cp u-boot.bin fip/bl33.bin > + > + $ sh fip/blx_fix.sh \ > + fip/bl30.bin \ > + fip/zero_tmp \ > + fip/bl30_zero.bin \ > + fip/bl301.bin \ > + fip/bl301_zero.bin \ > + fip/bl30_new.bin \ > + bl30 > + > + $ sh fip/blx_fix.sh \ > + fip/bl2.bin \ > + fip/zero_tmp \ > + fip/bl2_zero.bin \ > + fip/acs.bin \ > + fip/bl21_zero.bin \ > + fip/bl2_new.bin \ > + bl2 > + > + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ > + --output fip/bl30_new.bin.g12a.enc \ > + --level v3 > + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ > + --output fip/bl30_new.bin.enc \ > + --level v3 --type bl30 > + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ > + --output fip/bl31.img.enc \ > + --level v3 --type bl31 > + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ > + --output fip/bl33.bin.enc \ > + --level v3 --type bl33 --compress lz4 > + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ > + --output fip/bl2.n.bin.sig > + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ > + --output fip/u-boot.bin \ > + --bl2 fip/bl2.n.bin.sig \ > + --bl30 fip/bl30_new.bin.enc \ > + --bl31 fip/bl31.img.enc \ > + --bl33 fip/bl33.bin.enc \ > + --ddrfw1 fip/ddr4_1d.fw \ > + --ddrfw2 fip/ddr4_2d.fw \ > + --ddrfw3 fip/ddr3_1d.fw \ > + --ddrfw4 fip/piei.fw \ > + --ddrfw5 fip/lpddr4_1d.fw \ > + --ddrfw6 fip/lpddr4_2d.fw \ > + --ddrfw7 fip/diag_lpddr4.fw \ > + --ddrfw8 fip/aml_ddr.fw \ > + --level v3 > > and then write the image to SD with: > > - > DEV=/dev/your_sd_device > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > +.. code-block:: bash > + > + $ DEV=/dev/your_sd_device > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > diff --git a/board/amlogic/p200/README.p200 b/doc/board/amlogic/p200.rst > similarity index 24% > rename from board/amlogic/p200/README.p200 > rename to doc/board/amlogic/p200.rst > index 84d5ca5356..b6103b25fe 100644 > --- a/board/amlogic/p200/README.p200 > +++ b/doc/board/amlogic/p200.rst > @@ -17,86 +17,84 @@ specifications: > > Schematics are available from Amlogic on demand. > > -Currently the u-boot port supports the following devices: > - - serial > - - eMMC, microSD > - - Ethernet > - - I2C > - - Regulators > - - Reset controller > - - Clock controller > - - USB Host > - - ADC > +U-Boot compilation > +------------------ > > -u-boot compilation > -================== > +.. code-block:: bash > > - > export CROSS_COMPILE=aarch64-none-elf- > - > make p200_defconfig > - > make > + $ export CROSS_COMPILE=aarch64-none-elf- > + $ make p200_defconfig > + $ make > > Image creation > -============== > +-------------- > > Amlogic doesn't provide sources for the firmware and for tools needed > to create the bootloader image, so it is necessary to obtain them from > the git tree published by the board vendor: > > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot > - > cd amlogic-u-boot > - > make gxb_p200_v1_defconfig > - > make > - > export FIPDIR=$PWD/fip > +.. code-block:: bash > + > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot > + $ cd amlogic-u-boot > + $ make gxb_p200_v1_defconfig > + $ make > + $ export FIPDIR=$PWD/fip > > Go back to mainline U-boot source tree then : > - > mkdir fip > - > - > cp $FIPDIR/gxl/bl2.bin fip/ > - > cp $FIPDIR/gxl/acs.bin fip/ > - > cp $FIPDIR/gxl/bl21.bin fip/ > - > cp $FIPDIR/gxl/bl30.bin fip/ > - > cp $FIPDIR/gxl/bl301.bin fip/ > - > cp $FIPDIR/gxl/bl31.img fip/ > - > cp u-boot.bin fip/bl33.bin > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl30.bin \ > - fip/zero_tmp \ > - fip/bl30_zero.bin \ > - fip/bl301.bin \ > - fip/bl301_zero.bin \ > - fip/bl30_new.bin \ > - bl30 > - > - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl2_acs.bin \ > - fip/zero_tmp \ > - fip/bl2_zero.bin \ > - fip/bl21.bin \ > - fip/bl21_zero.bin \ > - fip/bl2_new.bin \ > - bl2 > - > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig > - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ > - --output fip/u-boot.bin \ > - --bl2 fip/bl2.n.bin.sig \ > - --bl30 fip/bl30_new.bin.enc \ > - --bl31 fip/bl31.img.enc \ > - --bl33 fip/bl33.bin.enc > + > +.. code-block:: bash > + > + $ mkdir fip > + > + $ cp $FIPDIR/gxl/bl2.bin fip/ > + $ cp $FIPDIR/gxl/acs.bin fip/ > + $ cp $FIPDIR/gxl/bl21.bin fip/ > + $ cp $FIPDIR/gxl/bl30.bin fip/ > + $ cp $FIPDIR/gxl/bl301.bin fip/ > + $ cp $FIPDIR/gxl/bl31.img fip/ > + $ cp u-boot.bin fip/bl33.bin > + > + $ $FIPDIR/blx_fix.sh \ > + fip/bl30.bin \ > + fip/zero_tmp \ > + fip/bl30_zero.bin \ > + fip/bl301.bin \ > + fip/bl301_zero.bin \ > + fip/bl30_new.bin \ > + bl30 > + > + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > + > + $ $FIPDIR/blx_fix.sh \ > + fip/bl2_acs.bin \ > + fip/zero_tmp \ > + fip/bl2_zero.bin \ > + fip/bl21.bin \ > + fip/bl21_zero.bin \ > + fip/bl2_new.bin \ > + bl2 > + > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig > + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ > + --output fip/u-boot.bin \ > + --bl2 fip/bl2.n.bin.sig \ > + --bl30 fip/bl30_new.bin.enc \ > + --bl31 fip/bl31.img.enc \ > + --bl33 fip/bl33.bin.enc > > and then write the image to SD with: > > - > DEV=/dev/your_sd_device > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > +.. code-block:: bash > + > + $ DEV=/dev/your_sd_device > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > diff --git a/board/amlogic/p201/README.p201 b/doc/board/amlogic/p201.rst > similarity index 24% > rename from board/amlogic/p201/README.p201 > rename to doc/board/amlogic/p201.rst > index 4bb5e95905..da14f84ac2 100644 > --- a/board/amlogic/p201/README.p201 > +++ b/doc/board/amlogic/p201.rst > @@ -17,86 +17,84 @@ specifications: > > Schematics are available from Amlogic on demand. > > -Currently the u-boot port supports the following devices: > - - serial > - - eMMC, microSD > - - Ethernet > - - I2C > - - Regulators > - - Reset controller > - - Clock controller > - - USB Host > - - ADC > +U-Boot compilation > +------------------ > > -u-boot compilation > -================== > +.. code-block:: bash > > - > export CROSS_COMPILE=aarch64-none-elf- > - > make p201_defconfig > - > make > + $ export CROSS_COMPILE=aarch64-none-elf- > + $ make p201_defconfig > + $ make > > Image creation > -============== > +-------------- > > Amlogic doesn't provide sources for the firmware and for tools needed > to create the bootloader image, so it is necessary to obtain them from > the git tree published by the board vendor: > > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot > - > cd amlogic-u-boot > - > make gxb_p201_v1_defconfig > - > make > - > export FIPDIR=$PWD/fip > +.. code-block:: bash > + > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot > + $ cd amlogic-u-boot > + $ make gxb_p201_v1_defconfig > + $ make > + $ export FIPDIR=$PWD/fip > > Go back to mainline U-boot source tree then : > - > mkdir fip > - > - > cp $FIPDIR/gxl/bl2.bin fip/ > - > cp $FIPDIR/gxl/acs.bin fip/ > - > cp $FIPDIR/gxl/bl21.bin fip/ > - > cp $FIPDIR/gxl/bl30.bin fip/ > - > cp $FIPDIR/gxl/bl301.bin fip/ > - > cp $FIPDIR/gxl/bl31.img fip/ > - > cp u-boot.bin fip/bl33.bin > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl30.bin \ > - fip/zero_tmp \ > - fip/bl30_zero.bin \ > - fip/bl301.bin \ > - fip/bl301_zero.bin \ > - fip/bl30_new.bin \ > - bl30 > - > - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl2_acs.bin \ > - fip/zero_tmp \ > - fip/bl2_zero.bin \ > - fip/bl21.bin \ > - fip/bl21_zero.bin \ > - fip/bl2_new.bin \ > - bl2 > - > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig > - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ > - --output fip/u-boot.bin \ > - --bl2 fip/bl2.n.bin.sig \ > - --bl30 fip/bl30_new.bin.enc \ > - --bl31 fip/bl31.img.enc \ > - --bl33 fip/bl33.bin.enc > + > +.. code-block:: bash > + > + $ mkdir fip > + > + $ cp $FIPDIR/gxl/bl2.bin fip/ > + $ cp $FIPDIR/gxl/acs.bin fip/ > + $ cp $FIPDIR/gxl/bl21.bin fip/ > + $ cp $FIPDIR/gxl/bl30.bin fip/ > + $ cp $FIPDIR/gxl/bl301.bin fip/ > + $ cp $FIPDIR/gxl/bl31.img fip/ > + $ cp u-boot.bin fip/bl33.bin > + > + $ $FIPDIR/blx_fix.sh \ > + fip/bl30.bin \ > + fip/zero_tmp \ > + fip/bl30_zero.bin \ > + fip/bl301.bin \ > + fip/bl301_zero.bin \ > + fip/bl30_new.bin \ > + bl30 > + > + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > + > + $ $FIPDIR/blx_fix.sh \ > + fip/bl2_acs.bin \ > + fip/zero_tmp \ > + fip/bl2_zero.bin \ > + fip/bl21.bin \ > + fip/bl21_zero.bin \ > + fip/bl2_new.bin \ > + bl2 > + > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig > + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ > + --output fip/u-boot.bin \ > + --bl2 fip/bl2.n.bin.sig \ > + --bl30 fip/bl30_new.bin.enc \ > + --bl31 fip/bl31.img.enc \ > + --bl33 fip/bl33.bin.enc > > and then write the image to SD with: > > - > DEV=/dev/your_sd_device > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > +.. code-block:: bash > + > + $ DEV=/dev/your_sd_device > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > diff --git a/board/amlogic/p212/README.p212 b/doc/board/amlogic/p212.rst > similarity index 24% > rename from board/amlogic/p212/README.p212 > rename to doc/board/amlogic/p212.rst > index 3776f24493..c6c375077d 100644 > --- a/board/amlogic/p212/README.p212 > +++ b/doc/board/amlogic/p212.rst > @@ -17,86 +17,84 @@ specifications: > > Schematics are available from Amlogic on demand. > > -Currently the u-boot port supports the following devices: > - - serial > - - eMMC, microSD > - - Ethernet > - - I2C > - - Regulators > - - Reset controller > - - Clock controller > - - USB Host > - - ADC > +U-Boot compilation > +------------------ > > -u-boot compilation > -================== > +.. code-block:: bash > > - > export CROSS_COMPILE=aarch64-none-elf- > - > make p212_defconfig > - > make > + $ export CROSS_COMPILE=aarch64-none-elf- > + $ make p212_defconfig > + $ make > > Image creation > -============== > +-------------- > > Amlogic doesn't provide sources for the firmware and for tools needed > to create the bootloader image, so it is necessary to obtain them from > the git tree published by the board vendor: > > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot > - > cd amlogic-u-boot > - > make gxl_p212_v1_defconfig > - > make > - > export FIPDIR=$PWD/fip > +.. code-block:: bash > + > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot > + $ cd amlogic-u-boot > + $ make gxl_p212_v1_defconfig > + $ make > + $ export FIPDIR=$PWD/fip > > Go back to mainline U-boot source tree then : > - > mkdir fip > - > - > cp $FIPDIR/gxl/bl2.bin fip/ > - > cp $FIPDIR/gxl/acs.bin fip/ > - > cp $FIPDIR/gxl/bl21.bin fip/ > - > cp $FIPDIR/gxl/bl30.bin fip/ > - > cp $FIPDIR/gxl/bl301.bin fip/ > - > cp $FIPDIR/gxl/bl31.img fip/ > - > cp u-boot.bin fip/bl33.bin > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl30.bin \ > - fip/zero_tmp \ > - fip/bl30_zero.bin \ > - fip/bl301.bin \ > - fip/bl301_zero.bin \ > - fip/bl30_new.bin \ > - bl30 > - > - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl2_acs.bin \ > - fip/zero_tmp \ > - fip/bl2_zero.bin \ > - fip/bl21.bin \ > - fip/bl21_zero.bin \ > - fip/bl2_new.bin \ > - bl2 > - > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig > - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ > - --output fip/u-boot.bin \ > - --bl2 fip/bl2.n.bin.sig \ > - --bl30 fip/bl30_new.bin.enc \ > - --bl31 fip/bl31.img.enc \ > - --bl33 fip/bl33.bin.enc > + > +.. code-block:: bash > + > + $ mkdir fip > + > + $ cp $FIPDIR/gxl/bl2.bin fip/ > + $ cp $FIPDIR/gxl/acs.bin fip/ > + $ cp $FIPDIR/gxl/bl21.bin fip/ > + $ cp $FIPDIR/gxl/bl30.bin fip/ > + $ cp $FIPDIR/gxl/bl301.bin fip/ > + $ cp $FIPDIR/gxl/bl31.img fip/ > + $ cp u-boot.bin fip/bl33.bin > + > + $ $FIPDIR/blx_fix.sh \ > + fip/bl30.bin \ > + fip/zero_tmp \ > + fip/bl30_zero.bin \ > + fip/bl301.bin \ > + fip/bl301_zero.bin \ > + fip/bl30_new.bin \ > + bl30 > + > + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > + > + $ $FIPDIR/blx_fix.sh \ > + fip/bl2_acs.bin \ > + fip/zero_tmp \ > + fip/bl2_zero.bin \ > + fip/bl21.bin \ > + fip/bl21_zero.bin \ > + fip/bl2_new.bin \ > + bl2 > + > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig > + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ > + --output fip/u-boot.bin \ > + --bl2 fip/bl2.n.bin.sig \ > + --bl30 fip/bl30_new.bin.enc \ > + --bl31 fip/bl31.img.enc \ > + --bl33 fip/bl33.bin.enc > > and then write the image to SD with: > > - > DEV=/dev/your_sd_device > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > +.. code-block:: bash > + > + $ DEV=/dev/your_sd_device > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > diff --git a/board/amlogic/q200/README.q200 b/doc/board/amlogic/q200.rst > similarity index 24% > rename from board/amlogic/q200/README.q200 > rename to doc/board/amlogic/q200.rst > index d4142c88bd..58ebe52a2a 100644 > --- a/board/amlogic/q200/README.q200 > +++ b/doc/board/amlogic/q200.rst > @@ -16,86 +16,84 @@ specifications: > - SDIO Wifi Module, Bluetooth > - IR receiver > > -Currently the u-boot port supports the following devices: > - - serial > - - eMMC, microSD > - - Ethernet > - - I2C > - - Regulators > - - Reset controller > - - Clock controller > - - USB Host > - - ADC > - > U-Boot compilation > -================== > +------------------ > + > +.. code-block:: bash > > - > export CROSS_COMPILE=aarch64-none-elf- > - > make khadas-vim2_defconfig > - > make > + $ export CROSS_COMPILE=aarch64-none-elf- > + $ make khadas-vim2_defconfig > + $ make > > Image creation > -============== > +-------------- > > Amlogic doesn't provide sources for the firmware and for tools needed > to create the bootloader image, so it is necessary to obtain them from > the git tree published by the board vendor: > > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot > - > cd amlogic-u-boot > - > make gxm_q200_v1_defconfig > - > make > - > export FIPDIR=$PWD/fip > +.. code-block:: bash > + > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot > + $ cd amlogic-u-boot > + $ make gxm_q200_v1_defconfig > + $ make > + $ export FIPDIR=$PWD/fip > > Go back to mainline U-Boot source tree then : > - > mkdir fip > - > - > cp $FIPDIR/gxl/bl2.bin fip/ > - > cp $FIPDIR/gxl/acs.bin fip/ > - > cp $FIPDIR/gxl/bl21.bin fip/ > - > cp $FIPDIR/gxl/bl30.bin fip/ > - > cp $FIPDIR/gxl/bl301.bin fip/ > - > cp $FIPDIR/gxl/bl31.img fip/ > - > cp u-boot.bin fip/bl33.bin > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl30.bin \ > - fip/zero_tmp \ > - fip/bl30_zero.bin \ > - fip/bl301.bin \ > - fip/bl301_zero.bin \ > - fip/bl30_new.bin \ > - bl30 > - > - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl2_acs.bin \ > - fip/zero_tmp \ > - fip/bl2_zero.bin \ > - fip/bl21.bin \ > - fip/bl21_zero.bin \ > - fip/bl2_new.bin \ > - bl2 > - > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig > - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ > - --output fip/u-boot.bin \ > - --bl2 fip/bl2.n.bin.sig \ > - --bl30 fip/bl30_new.bin.enc \ > - --bl31 fip/bl31.img.enc \ > - --bl33 fip/bl33.bin.enc > + > +.. code-block:: bash > + > + $ mkdir fip > + > + $ cp $FIPDIR/gxl/bl2.bin fip/ > + $ cp $FIPDIR/gxl/acs.bin fip/ > + $ cp $FIPDIR/gxl/bl21.bin fip/ > + $ cp $FIPDIR/gxl/bl30.bin fip/ > + $ cp $FIPDIR/gxl/bl301.bin fip/ > + $ cp $FIPDIR/gxl/bl31.img fip/ > + $ cp u-boot.bin fip/bl33.bin > + > + $ $FIPDIR/blx_fix.sh \ > + fip/bl30.bin \ > + fip/zero_tmp \ > + fip/bl30_zero.bin \ > + fip/bl301.bin \ > + fip/bl301_zero.bin \ > + fip/bl30_new.bin \ > + bl30 > + > + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > + > + $ $FIPDIR/blx_fix.sh \ > + fip/bl2_acs.bin \ > + fip/zero_tmp \ > + fip/bl2_zero.bin \ > + fip/bl21.bin \ > + fip/bl21_zero.bin \ > + fip/bl2_new.bin \ > + bl2 > + > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin > + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig > + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ > + --output fip/u-boot.bin \ > + --bl2 fip/bl2.n.bin.sig \ > + --bl30 fip/bl30_new.bin.enc \ > + --bl31 fip/bl31.img.enc \ > + --bl33 fip/bl33.bin.enc > > and then write the image to SD with: > > - > DEV=/dev/your_sd_device > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > +.. code-block:: bash > + > + $ DEV=/dev/your_sd_device > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > diff --git a/board/amlogic/s400/README b/doc/board/amlogic/s400.rst > similarity index 21% > rename from board/amlogic/s400/README > rename to doc/board/amlogic/s400.rst > index a48db22a42..a1d5cac633 100644 > --- a/board/amlogic/s400/README > +++ b/doc/board/amlogic/s400.rst > @@ -17,93 +17,91 @@ specifications: > > Schematics are available from Amlogic on demand. > > -Currently the u-boot port supports the following devices: > - - serial > - - eMMC > - - Ethernet > - - I2C > - - Regulators > - - Reset controller > - - Clock controller > - - USB Host > - - ADC > +U-Boot compilation > +------------------ > > -u-boot compilation > -================== > +.. code-block:: bash > > - > export CROSS_COMPILE=aarch64-none-elf- > - > make s400_defconfig > - > make > + $ export CROSS_COMPILE=aarch64-none-elf- > + $ make s400_defconfig > + $ make > > Image creation > -============== > +-------------- > > Amlogic doesn't provide sources for the firmware and for tools needed > to create the bootloader image, so it is necessary to obtain them from > the git tree published by the board vendor: > > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot > - > cd amlogic-u-boot > - > make axg_s400_v1_defconfig > - > make > - > export FIPDIR=$PWD/fip > +.. code-block:: bash > + > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot > + $ cd amlogic-u-boot > + $ make axg_s400_v1_defconfig > + $ make > + $ export FIPDIR=$PWD/fip > > Go back to mainline U-boot source tree then : > - > mkdir fip > - > - > cp $FIPDIR/axg/bl2.bin fip/ > - > cp $FIPDIR/axg/acs.bin fip/ > - > cp $FIPDIR/axg/bl21.bin fip/ > - > cp $FIPDIR/axg/bl30.bin fip/ > - > cp $FIPDIR/axg/bl301.bin fip/ > - > cp $FIPDIR/axg/bl31.img fip/ > - > cp u-boot.bin fip/bl33.bin > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl30.bin \ > - fip/zero_tmp \ > - fip/bl30_zero.bin \ > - fip/bl301.bin \ > - fip/bl301_zero.bin \ > - fip/bl30_new.bin \ > - bl30 > - > - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 > - > - > $FIPDIR/blx_fix.sh \ > - fip/bl2_acs.bin \ > - fip/zero_tmp \ > - fip/bl2_zero.bin \ > - fip/bl21.bin \ > - fip/bl21_zero.bin \ > - fip/bl2_new.bin \ > - bl2 > - > - > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl30_new.bin \ > - --output fip/bl30_new.bin.enc \ > - --level v3 --type bl30 > - > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl31.img \ > - --output fip/bl31.img.enc \ > - --level v3 --type bl31 > - > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl33.bin --compress lz4 \ > - --output fip/bl33.bin.enc \ > - --level v3 --type bl33 > - > $FIPDIR/axg/aml_encrypt_axg --bl2sig --input fip/bl2_new.bin \ > - --output f ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/2] board: amlogic: move boards doc into doc/board/amlogic 2020-06-16 4:35 ` Anand Moon @ 2020-06-16 7:40 ` Neil Armstrong 0 siblings, 0 replies; 7+ messages in thread From: Neil Armstrong @ 2020-06-16 7:40 UTC (permalink / raw) To: u-boot Hi, On 16/06/2020 06:35, Anand Moon wrote: > Hi Neil, > > On Thu, 11 Jun 2020 at 19:20, Neil Armstrong <narmstrong@baylibre.com> wrote: >> >> Move the natural text Amlogic board README files to doc/board/amlogic >> into reStructuredText and : >> - add reStructuredText markup for bash code >> - fix secondary titles markup >> - move board support into global support matrix >> >> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > > Can you also update the following information for flashing u-boot image for eMMC > > # Binaries should be available in fip directory : > fip/ > | ... > |------ u-boot.bin (for eMMC) > |------ u-boot.bin.sd.bin (for SDCard) > > And the following for eMMC > > [0] https://github.com/BayLibre/u-boot/tree/readme#install-on-emmc > > So that it's clear which image should be used for particular booting device. Sure, I'll send it as an update after the V2 of this patchset. Neil > > -Anand > >> --- >> doc/board/amlogic/index.rst | 95 +++++++++ >> .../board/amlogic/khadas-vim.rst | 138 +++++++------ >> .../board/amlogic/khadas-vim2.rst | 138 ++++++------- >> .../board/amlogic/khadas-vim3.rst | 189 +++++++++-------- >> .../board/amlogic/khadas-vim3l.rst | 189 +++++++++-------- >> .../board/amlogic/libretech-ac.rst | 142 ++++++------- >> .../board/amlogic/libretech-cc.rst | 139 +++++++------ >> .../board/amlogic/nanopi-k2.rst | 136 +++++++------ >> .../board/amlogic/odroid-c2.rst | 50 +++-- >> .../board/amlogic/odroid-n2.rst | 187 +++++++++-------- >> .../README.p200 => doc/board/amlogic/p200.rst | 136 ++++++------- >> .../README.p201 => doc/board/amlogic/p201.rst | 136 ++++++------- >> .../README.p212 => doc/board/amlogic/p212.rst | 136 ++++++------- >> .../README.q200 => doc/board/amlogic/q200.rst | 136 ++++++------- >> .../s400/README => doc/board/amlogic/s400.rst | 150 +++++++------- >> .../README => doc/board/amlogic/sei510.rst | 190 ++++++++--------- >> .../README => doc/board/amlogic/sei610.rst | 185 +++++++++-------- >> .../u200/README => doc/board/amlogic/u200.rst | 188 ++++++++--------- >> .../README.w400 => doc/board/amlogic/w400.rst | 192 +++++++++--------- >> doc/board/index.rst | 1 + >> 20 files changed, 1484 insertions(+), 1369 deletions(-) >> create mode 100644 doc/board/amlogic/index.rst >> rename board/amlogic/p212/README.khadas-vim => doc/board/amlogic/khadas-vim.rst (24%) >> rename board/amlogic/q200/README.khadas-vim2 => doc/board/amlogic/khadas-vim2.rst (26%) >> rename board/amlogic/w400/README.khadas-vim3 => doc/board/amlogic/khadas-vim3.rst (20%) >> rename board/amlogic/w400/README.khadas-vim3l => doc/board/amlogic/khadas-vim3l.rst (19%) >> rename board/amlogic/p212/README.libretech-ac => doc/board/amlogic/libretech-ac.rst (21%) >> rename board/amlogic/p212/README.libretech-cc => doc/board/amlogic/libretech-cc.rst (46%) >> rename board/amlogic/p200/README.nanopi-k2 => doc/board/amlogic/nanopi-k2.rst (24%) >> rename board/amlogic/p200/README.odroid-c2 => doc/board/amlogic/odroid-c2.rst (56%) >> rename board/amlogic/w400/README.odroid-n2 => doc/board/amlogic/odroid-n2.rst (19%) >> rename board/amlogic/p200/README.p200 => doc/board/amlogic/p200.rst (24%) >> rename board/amlogic/p201/README.p201 => doc/board/amlogic/p201.rst (24%) >> rename board/amlogic/p212/README.p212 => doc/board/amlogic/p212.rst (24%) >> rename board/amlogic/q200/README.q200 => doc/board/amlogic/q200.rst (24%) >> rename board/amlogic/s400/README => doc/board/amlogic/s400.rst (21%) >> rename board/amlogic/sei510/README => doc/board/amlogic/sei510.rst (14%) >> rename board/amlogic/sei610/README => doc/board/amlogic/sei610.rst (16%) >> rename board/amlogic/u200/README => doc/board/amlogic/u200.rst (17%) >> rename board/amlogic/w400/README.w400 => doc/board/amlogic/w400.rst (17%) >> >> diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst >> new file mode 100644 >> index 0000000000..3730419167 >> --- /dev/null >> +++ b/doc/board/amlogic/index.rst >> @@ -0,0 +1,95 @@ >> +.. SPDX-License-Identifier: GPL-2.0+ >> + >> +Amlogic >> +======= >> + >> +Hardware Support Matrix >> +----------------------- >> + >> +An up-do-date matrix is also available on: http://linux-meson.com >> + >> +This matrix concerns the actual source code version. >> + >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| | S905 | S905X | S912 | A113X | S905X2 | S922X | S905X3 | >> +| | | S805X | S905D | | S905D2 | A311D | S905D3 | >> +| | | | | | S905Y2 | | | >> ++===============================+===========+==============+==============+============+============+=============+==============+ >> +| Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 | >> +| | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L | >> +| | P200 | LibreTech-CC | | | | | | >> +| | P201 | LibreTech-AC | | | | | | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| Pinctrl/GPIO | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| Clock Control | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| PWM | No | No | No | No | No | No | No | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| Reset Control | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| Infrared Decoder | No | No | No | No | No | No | No | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| Ethernet | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| Multi-core | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| Fuse access | **Yes** | **Yes** |**Yes** |**Yes** |**Yes** |**Yes** | **Yes** | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| SPI (FC) | **Yes** | **Yes** | **Yes** | **Yes** |**Yes** | **Yes** | No | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| SPI (CC) | No | No | No | No | No | No | No | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| I2C | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| USB | **Yes** | **Yes** | **Yes** | No | **Yes** | **Yes** | **Yes** | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| USB OTG | No | **Yes** | **Yes** | No | **Yes** | **Yes** | **Yes** | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| eMMC | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| SDCard | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| NAND | No | No | No | No | No | No | No | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| ADC | **Yes** | **Yes** | **Yes** | No | No | No | No | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| CVBS Output | **Yes** | **Yes** | **Yes** | *N/A* | **Yes** | **Yes** | **Yes** | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| HDMI Output | **Yes** | **Yes** | **Yes** | *N/A* | **Yes** | **Yes** | **Yes** | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| CEC | No | No | No | *N/A* | No | No | No | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| Thermal Sensor | No | No | No | No | No | No | No | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| LCD/LVDS Output | No | *N/A* | No | No | No | No | No | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> +| SoC (version) information | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | >> ++-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ >> + >> +Board Documentation >> +------------------- >> + >> +.. toctree:: >> + :maxdepth: 1 >> + >> + khadas-vim2 >> + khadas-vim3l >> + khadas-vim3 >> + khadas-vim >> + libretech-ac >> + libretech-cc >> + nanopi-k2 >> + odroid-c2 >> + odroid-n2 >> + p200 >> + p201 >> + p212 >> + q200 >> + s400 >> + sei510 >> + sei610 >> + u200 >> + w400 >> diff --git a/board/amlogic/p212/README.khadas-vim b/doc/board/amlogic/khadas-vim.rst >> similarity index 24% >> rename from board/amlogic/p212/README.khadas-vim >> rename to doc/board/amlogic/khadas-vim.rst >> index ccf933861b..397382c375 100644 >> --- a/board/amlogic/p212/README.khadas-vim >> +++ b/doc/board/amlogic/khadas-vim.rst >> @@ -1,5 +1,5 @@ >> U-Boot for Khadas VIM >> -======================= >> +====================== >> >> Khadas VIM is an Open Source DIY Box manufactured by Shenzhen Wesion >> Technology Co., Ltd with the following specifications: >> @@ -16,86 +16,84 @@ Technology Co., Ltd with the following specifications: >> - SDIO Wifi Module, Bluetooth >> - Two channels IR receiver >> >> -Currently the u-boot port supports the following devices: >> - - serial >> - - eMMC, microSD >> - - Ethernet >> - - I2C >> - - Regulators >> - - Reset controller >> - - Clock controller >> - - USB Host >> - - ADC >> - >> U-Boot compilation >> -================== >> +------------------ >> + >> +.. code-block:: bash >> >> - > export CROSS_COMPILE=aarch64-none-elf- >> - > make khadas-vim_defconfig >> - > make >> + $ export CROSS_COMPILE=aarch64-none-elf- >> + $ make khadas-vim_defconfig >> + $ make >> >> Image creation >> -============== >> +-------------- >> >> Amlogic doesn't provide sources for the firmware and for tools needed >> to create the bootloader image, so it is necessary to obtain them from >> the git tree published by the board vendor: >> >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> - > git clone https://github.com/khadas/u-boot -b Vim vim-u-boot >> - > cd vim-u-boot >> - > make kvim_defconfig >> - > make CROSS_COMPILE=aarch64-none-elf- >> - > export FIPDIR=$PWD/fip >> +.. code-block:: bash >> + >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> + $ git clone https://github.com/khadas/u-boot -b Vim vim-u-boot >> + $ cd vim-u-boot >> + $ make kvim_defconfig >> + $ make CROSS_COMPILE=aarch64-none-elf- >> + $ export FIPDIR=$PWD/fip >> >> Go back to mainline U-Boot source tree then : >> - > mkdir fip >> - >> - > cp $FIPDIR/gxl/bl2.bin fip/ >> - > cp $FIPDIR/gxl/acs.bin fip/ >> - > cp $FIPDIR/gxl/bl21.bin fip/ >> - > cp $FIPDIR/gxl/bl30.bin fip/ >> - > cp $FIPDIR/gxl/bl301.bin fip/ >> - > cp $FIPDIR/gxl/bl31.img fip/ >> - > cp u-boot.bin fip/bl33.bin >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl30.bin \ >> - fip/zero_tmp \ >> - fip/bl30_zero.bin \ >> - fip/bl301.bin \ >> - fip/bl301_zero.bin \ >> - fip/bl30_new.bin \ >> - bl30 >> - >> - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl2_acs.bin \ >> - fip/zero_tmp \ >> - fip/bl2_zero.bin \ >> - fip/bl21.bin \ >> - fip/bl21_zero.bin \ >> - fip/bl2_new.bin \ >> - bl2 >> - >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig >> - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ >> - --output fip/u-boot.bin \ >> - --bl2 fip/bl2.n.bin.sig \ >> - --bl30 fip/bl30_new.bin.enc \ >> - --bl31 fip/bl31.img.enc \ >> - --bl33 fip/bl33.bin.enc >> + >> +.. code-block:: bash >> + >> + $ mkdir fip >> + >> + $ cp $FIPDIR/gxl/bl2.bin fip/ >> + $ cp $FIPDIR/gxl/acs.bin fip/ >> + $ cp $FIPDIR/gxl/bl21.bin fip/ >> + $ cp $FIPDIR/gxl/bl30.bin fip/ >> + $ cp $FIPDIR/gxl/bl301.bin fip/ >> + $ cp $FIPDIR/gxl/bl31.img fip/ >> + $ cp u-boot.bin fip/bl33.bin >> + >> + $ $FIPDIR/blx_fix.sh \ >> + fip/bl30.bin \ >> + fip/zero_tmp \ >> + fip/bl30_zero.bin \ >> + fip/bl301.bin \ >> + fip/bl301_zero.bin \ >> + fip/bl30_new.bin \ >> + bl30 >> + >> + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> + >> + $ $FIPDIR/blx_fix.sh \ >> + fip/bl2_acs.bin \ >> + fip/zero_tmp \ >> + fip/bl2_zero.bin \ >> + fip/bl21.bin \ >> + fip/bl21_zero.bin \ >> + fip/bl2_new.bin \ >> + bl2 >> + >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ >> + --output fip/u-boot.bin \ >> + --bl2 fip/bl2.n.bin.sig \ >> + --bl30 fip/bl30_new.bin.enc \ >> + --bl31 fip/bl31.img.enc \ >> + --bl33 fip/bl33.bin.enc >> >> and then write the image to SD with: >> >> - > DEV=/dev/your_sd_device >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> +.. code-block:: bash >> + >> + $ DEV=/dev/your_sd_device >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> diff --git a/board/amlogic/q200/README.khadas-vim2 b/doc/board/amlogic/khadas-vim2.rst >> similarity index 26% >> rename from board/amlogic/q200/README.khadas-vim2 >> rename to doc/board/amlogic/khadas-vim2.rst >> index 595998c4fa..c57d96d8b0 100644 >> --- a/board/amlogic/q200/README.khadas-vim2 >> +++ b/doc/board/amlogic/khadas-vim2.rst >> @@ -1,3 +1,5 @@ >> +.. SPDX-License-Identifier: GPL-2.0+ >> + >> U-Boot for Khadas VIM2 >> ======================= >> >> @@ -17,86 +19,84 @@ Technology Co., Ltd with the following specifications: >> - SDIO Wifi Module, Bluetooth >> - Two channels IR receiver >> >> -Currently the u-boot port supports the following devices: >> - - serial >> - - eMMC, microSD >> - - Ethernet >> - - I2C >> - - Regulators >> - - Reset controller >> - - Clock controller >> - - USB Host >> - - ADC >> - >> U-Boot compilation >> -================== >> +------------------ >> + >> +.. code-block:: bash >> >> - > export CROSS_COMPILE=aarch64-none-elf- >> - > make khadas-vim2_defconfig >> - > make >> + $ export CROSS_COMPILE=aarch64-none-elf- >> + $ make khadas-vim2_defconfig >> + $ make >> >> Image creation >> -============== >> +-------------- >> >> Amlogic doesn't provide sources for the firmware and for tools needed >> to create the bootloader image, so it is necessary to obtain them from >> the git tree published by the board vendor: >> >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> - > git clone https://github.com/khadas/u-boot -b khadas-vim-v2015.01 vim-u-boot >> - > cd vim-u-boot >> - > make kvim2_defconfig >> - > make >> - > export FIPDIR=$PWD/fip >> +.. code-block:: bash >> + >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> + $ git clone https://github.com/khadas/u-boot -b khadas-vim-v2015.01 vim-u-boot >> + $ cd vim-u-boot >> + $ make kvim2_defconfig >> + $ make >> + $ export FIPDIR=$PWD/fip >> >> Go back to mainline U-Boot source tree then : >> - > mkdir fip >> - >> - > cp $FIPDIR/gxl/bl2.bin fip/ >> - > cp $FIPDIR/gxl/acs.bin fip/ >> - > cp $FIPDIR/gxl/bl21.bin fip/ >> - > cp $FIPDIR/gxl/bl30.bin fip/ >> - > cp $FIPDIR/gxl/bl301.bin fip/ >> - > cp $FIPDIR/gxl/bl31.img fip/ >> - > cp u-boot.bin fip/bl33.bin >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl30.bin \ >> - fip/zero_tmp \ >> - fip/bl30_zero.bin \ >> - fip/bl301.bin \ >> - fip/bl301_zero.bin \ >> - fip/bl30_new.bin \ >> - bl30 >> - >> - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl2_acs.bin \ >> - fip/zero_tmp \ >> - fip/bl2_zero.bin \ >> - fip/bl21.bin \ >> - fip/bl21_zero.bin \ >> - fip/bl2_new.bin \ >> - bl2 >> - >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig >> - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ >> - --output fip/u-boot.bin \ >> - --bl2 fip/bl2.n.bin.sig \ >> - --bl30 fip/bl30_new.bin.enc \ >> - --bl31 fip/bl31.img.enc \ >> - --bl33 fip/bl33.bin.enc >> + >> +.. code-block:: bash >> + >> + $ mkdir fip >> + >> + $ cp $FIPDIR/gxl/bl2.bin fip/ >> + $ cp $FIPDIR/gxl/acs.bin fip/ >> + $ cp $FIPDIR/gxl/bl21.bin fip/ >> + $ cp $FIPDIR/gxl/bl30.bin fip/ >> + $ cp $FIPDIR/gxl/bl301.bin fip/ >> + $ cp $FIPDIR/gxl/bl31.img fip/ >> + $ cp u-boot.bin fip/bl33.bin >> + >> + $ $FIPDIR/blx_fix.sh \ >> + fip/bl30.bin \ >> + fip/zero_tmp \ >> + fip/bl30_zero.bin \ >> + fip/bl301.bin \ >> + fip/bl301_zero.bin \ >> + fip/bl30_new.bin \ >> + bl30 >> + >> + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> + >> + $ $FIPDIR/blx_fix.sh \ >> + fip/bl2_acs.bin \ >> + fip/zero_tmp \ >> + fip/bl2_zero.bin \ >> + fip/bl21.bin \ >> + fip/bl21_zero.bin \ >> + fip/bl2_new.bin \ >> + bl2 >> + >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ >> + --output fip/u-boot.bin \ >> + --bl2 fip/bl2.n.bin.sig \ >> + --bl30 fip/bl30_new.bin.enc \ >> + --bl31 fip/bl31.img.enc \ >> + --bl33 fip/bl33.bin.enc >> >> and then write the image to SD with: >> >> - > DEV=/dev/your_sd_device >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> +.. code-block:: bash >> + >> + $ DEV=/dev/your_sd_device >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> diff --git a/board/amlogic/w400/README.khadas-vim3 b/doc/board/amlogic/khadas-vim3.rst >> similarity index 20% >> rename from board/amlogic/w400/README.khadas-vim3 >> rename to doc/board/amlogic/khadas-vim3.rst >> index 399bf49295..161ccc3ca3 100644 >> --- a/board/amlogic/w400/README.khadas-vim3 >> +++ b/doc/board/amlogic/khadas-vim3.rst >> @@ -16,116 +16,115 @@ Technology Co., Ltd. with the following specifications: >> >> Schematics are available on the manufacturer website. >> >> -Currently the U-Boot port supports the following devices: >> - - serial >> - - eMMC, microSD >> - - Ethernet >> - - I2C >> - - Regulators >> - - Reset controller >> - - Clock controller >> - - ADC >> +U-Boot compilation >> +------------------ >> >> -u-boot compilation >> -================== >> +.. code-block:: bash >> >> - > export CROSS_COMPILE=aarch64-none-elf- >> - > make khadas-vim3_defconfig >> - > make >> + $ export CROSS_COMPILE=aarch64-none-elf- >> + $ make khadas-vim3_defconfig >> + $ make >> >> Image creation >> -============== >> +-------------- >> >> Amlogic doesn't provide sources for the firmware and for tools needed >> to create the bootloader image, so it is necessary to obtain them from >> the git tree published by the board vendor: >> >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> +.. code-block:: bash >> + >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> >> - > DIR=vim3-u-boot >> - > git clone --depth 1 \ >> + $ DIR=vim3-u-boot >> + $ git clone --depth 1 \ >> https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \ >> $DIR >> >> - > cd vim3-u-boot >> - > make kvim3_defconfig >> - > make >> - > export UBOOTDIR=$PWD >> + $ cd vim3-u-boot >> + $ make kvim3_defconfig >> + $ make >> + $ export UBOOTDIR=$PWD >> >> Go back to mainline U-Boot source tree then : >> - > mkdir fip >> - >> - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ >> - > cp $UBOOTDIR/build/board/khadas/kvim3/firmware/acs.bin fip/ >> - > cp $UBOOTDIR/fip/g12b/bl2.bin fip/ >> - > cp $UBOOTDIR/fip/g12b/bl30.bin fip/ >> - > cp $UBOOTDIR/fip/g12b/bl31.img fip/ >> - > cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ >> - > cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ >> - > cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ >> - > cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ >> - > cp $UBOOTDIR/fip/g12b/lpddr3_1d.fw fip/ >> - > cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ >> - > cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ >> - > cp $UBOOTDIR/fip/g12b/piei.fw fip/ >> - > cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ >> - > cp u-boot.bin fip/bl33.bin >> - >> - > sh fip/blx_fix.sh \ >> - fip/bl30.bin \ >> - fip/zero_tmp \ >> - fip/bl30_zero.bin \ >> - fip/bl301.bin \ >> - fip/bl301_zero.bin \ >> - fip/bl30_new.bin \ >> - bl30 >> - >> - > sh fip/blx_fix.sh \ >> - fip/bl2.bin \ >> - fip/zero_tmp \ >> - fip/bl2_zero.bin \ >> - fip/acs.bin \ >> - fip/bl21_zero.bin \ >> - fip/bl2_new.bin \ >> - bl2 >> - >> - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ >> - --output fip/bl30_new.bin.g12a.enc \ >> - --level v3 >> - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ >> - --output fip/bl30_new.bin.enc \ >> - --level v3 --type bl30 >> - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ >> - --output fip/bl31.img.enc \ >> - --level v3 --type bl31 >> - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ >> - --output fip/bl33.bin.enc \ >> - --level v3 --type bl33 --compress lz4 >> - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ >> - --output fip/bl2.n.bin.sig >> - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ >> - --output fip/u-boot.bin \ >> - --bl2 fip/bl2.n.bin.sig \ >> - --bl30 fip/bl30_new.bin.enc \ >> - --bl31 fip/bl31.img.enc \ >> - --bl33 fip/bl33.bin.enc \ >> - --ddrfw1 fip/ddr4_1d.fw \ >> - --ddrfw2 fip/ddr4_2d.fw \ >> - --ddrfw3 fip/ddr3_1d.fw \ >> - --ddrfw4 fip/piei.fw \ >> - --ddrfw5 fip/lpddr4_1d.fw \ >> - --ddrfw6 fip/lpddr4_2d.fw \ >> - --ddrfw7 fip/diag_lpddr4.fw \ >> - --ddrfw8 fip/aml_ddr.fw \ >> - --ddrfw9 fip/lpddr3_1d.fw \ >> - --level v3 >> + >> +.. code-block:: bash >> + >> + $ mkdir fip >> + >> + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ >> + $ cp $UBOOTDIR/build/board/khadas/kvim3/firmware/acs.bin fip/ >> + $ cp $UBOOTDIR/fip/g12b/bl2.bin fip/ >> + $ cp $UBOOTDIR/fip/g12b/bl30.bin fip/ >> + $ cp $UBOOTDIR/fip/g12b/bl31.img fip/ >> + $ cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ >> + $ cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ >> + $ cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ >> + $ cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ >> + $ cp $UBOOTDIR/fip/g12b/lpddr3_1d.fw fip/ >> + $ cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ >> + $ cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ >> + $ cp $UBOOTDIR/fip/g12b/piei.fw fip/ >> + $ cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ >> + $ cp u-boot.bin fip/bl33.bin >> + >> + $ sh fip/blx_fix.sh \ >> + fip/bl30.bin \ >> + fip/zero_tmp \ >> + fip/bl30_zero.bin \ >> + fip/bl301.bin \ >> + fip/bl301_zero.bin \ >> + fip/bl30_new.bin \ >> + bl30 >> + >> + $ sh fip/blx_fix.sh \ >> + fip/bl2.bin \ >> + fip/zero_tmp \ >> + fip/bl2_zero.bin \ >> + fip/acs.bin \ >> + fip/bl21_zero.bin \ >> + fip/bl2_new.bin \ >> + bl2 >> + >> + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ >> + --output fip/bl30_new.bin.g12a.enc \ >> + --level v3 >> + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ >> + --output fip/bl30_new.bin.enc \ >> + --level v3 --type bl30 >> + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ >> + --output fip/bl31.img.enc \ >> + --level v3 --type bl31 >> + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ >> + --output fip/bl33.bin.enc \ >> + --level v3 --type bl33 --compress lz4 >> + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ >> + --output fip/bl2.n.bin.sig >> + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ >> + --output fip/u-boot.bin \ >> + --bl2 fip/bl2.n.bin.sig \ >> + --bl30 fip/bl30_new.bin.enc \ >> + --bl31 fip/bl31.img.enc \ >> + --bl33 fip/bl33.bin.enc \ >> + --ddrfw1 fip/ddr4_1d.fw \ >> + --ddrfw2 fip/ddr4_2d.fw \ >> + --ddrfw3 fip/ddr3_1d.fw \ >> + --ddrfw4 fip/piei.fw \ >> + --ddrfw5 fip/lpddr4_1d.fw \ >> + --ddrfw6 fip/lpddr4_2d.fw \ >> + --ddrfw7 fip/diag_lpddr4.fw \ >> + --ddrfw8 fip/aml_ddr.fw \ >> + --ddrfw9 fip/lpddr3_1d.fw \ >> + --level v3 >> >> and then write the image to SD with: >> >> - > DEV=/dev/your_sd_device >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> +.. code-block:: bash >> + >> + $ DEV=/dev/your_sd_device >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> diff --git a/board/amlogic/w400/README.khadas-vim3l b/doc/board/amlogic/khadas-vim3l.rst >> similarity index 19% >> rename from board/amlogic/w400/README.khadas-vim3l >> rename to doc/board/amlogic/khadas-vim3l.rst >> index b2d9abbfd9..9368359d5b 100644 >> --- a/board/amlogic/w400/README.khadas-vim3l >> +++ b/doc/board/amlogic/khadas-vim3l.rst >> @@ -16,116 +16,113 @@ Technology Co., Ltd. with the following specifications: >> >> Schematics are available on the manufacturer website. >> >> -Currently the U-Boot port supports the following devices: >> - - serial >> - - eMMC, microSD >> - - Ethernet >> - - I2C >> - - Regulators >> - - Reset controller >> - - Clock controller >> - - ADC >> - >> -u-boot compilation >> -================== >> +U-Boot compilation >> +------------------ >> >> - > export CROSS_COMPILE=aarch64-none-elf- >> - > make khadas-vim3l_defconfig >> - > make >> + $ export CROSS_COMPILE=aarch64-none-elf- >> + $ make khadas-vim3l_defconfig >> + $ make >> >> Image creation >> -============== >> +-------------- >> >> Amlogic doesn't provide sources for the firmware and for tools needed >> to create the bootloader image, so it is necessary to obtain them from >> the git tree published by the board vendor: >> >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> +.. code-block:: bash >> + >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> >> - > DIR=vim3l-u-boot >> - > git clone --depth 1 \ >> + $ DIR=vim3l-u-boot >> + $ git clone --depth 1 \ >> https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \ >> $DIR >> >> - > cd vim3l-u-boot >> - > make kvim3l_defconfig >> - > make >> - > export UBOOTDIR=$PWD >> + $ cd vim3l-u-boot >> + $ make kvim3l_defconfig >> + $ make >> + $ export UBOOTDIR=$PWD >> >> Go back to mainline U-Boot source tree then : >> - > mkdir fip >> - >> - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ >> - > cp $UBOOTDIR/build/board/khadas/kvim3l/firmware/acs.bin fip/ >> - > cp $UBOOTDIR/fip/g12a/bl2.bin fip/ >> - > cp $UBOOTDIR/fip/g12a/bl30.bin fip/ >> - > cp $UBOOTDIR/fip/g12a/bl31.img fip/ >> - > cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/ >> - > cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/ >> - > cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/ >> - > cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/ >> - > cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/ >> - > cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/ >> - > cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/ >> - > cp $UBOOTDIR/fip/g12a/piei.fw fip/ >> - > cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/ >> - > cp u-boot.bin fip/bl33.bin >> - >> - > sh fip/blx_fix.sh \ >> - fip/bl30.bin \ >> - fip/zero_tmp \ >> - fip/bl30_zero.bin \ >> - fip/bl301.bin \ >> - fip/bl301_zero.bin \ >> - fip/bl30_new.bin \ >> - bl30 >> - >> - > sh fip/blx_fix.sh \ >> - fip/bl2.bin \ >> - fip/zero_tmp \ >> - fip/bl2_zero.bin \ >> - fip/acs.bin \ >> - fip/bl21_zero.bin \ >> - fip/bl2_new.bin \ >> - bl2 >> - >> - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ >> - --output fip/bl30_new.bin.g12a.enc \ >> - --level v3 >> - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ >> - --output fip/bl30_new.bin.enc \ >> - --level v3 --type bl30 >> - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ >> - --output fip/bl31.img.enc \ >> - --level v3 --type bl31 >> - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ >> - --output fip/bl33.bin.enc \ >> - --level v3 --type bl33 --compress lz4 >> - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ >> - --output fip/bl2.n.bin.sig >> - > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \ >> - --output fip/u-boot.bin \ >> - --bl2 fip/bl2.n.bin.sig \ >> - --bl30 fip/bl30_new.bin.enc \ >> - --bl31 fip/bl31.img.enc \ >> - --bl33 fip/bl33.bin.enc \ >> - --ddrfw1 fip/ddr4_1d.fw \ >> - --ddrfw2 fip/ddr4_2d.fw \ >> - --ddrfw3 fip/ddr3_1d.fw \ >> - --ddrfw4 fip/piei.fw \ >> - --ddrfw5 fip/lpddr4_1d.fw \ >> - --ddrfw6 fip/lpddr4_2d.fw \ >> - --ddrfw7 fip/diag_lpddr4.fw \ >> - --ddrfw8 fip/aml_ddr.fw \ >> - --ddrfw9 fip/lpddr3_1d.fw \ >> - --level v3 >> + >> +.. code-block:: bash >> + >> + $ mkdir fip >> + >> + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ >> + $ cp $UBOOTDIR/build/board/khadas/kvim3l/firmware/acs.bin fip/ >> + $ cp $UBOOTDIR/fip/g12a/bl2.bin fip/ >> + $ cp $UBOOTDIR/fip/g12a/bl30.bin fip/ >> + $ cp $UBOOTDIR/fip/g12a/bl31.img fip/ >> + $ cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/ >> + $ cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/ >> + $ cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/ >> + $ cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/ >> + $ cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/ >> + $ cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/ >> + $ cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/ >> + $ cp $UBOOTDIR/fip/g12a/piei.fw fip/ >> + $ cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/ >> + $ cp u-boot.bin fip/bl33.bin >> + >> + $ sh fip/blx_fix.sh \ >> + fip/bl30.bin \ >> + fip/zero_tmp \ >> + fip/bl30_zero.bin \ >> + fip/bl301.bin \ >> + fip/bl301_zero.bin \ >> + fip/bl30_new.bin \ >> + bl30 >> + >> + $ sh fip/blx_fix.sh \ >> + fip/bl2.bin \ >> + fip/zero_tmp \ >> + fip/bl2_zero.bin \ >> + fip/acs.bin \ >> + fip/bl21_zero.bin \ >> + fip/bl2_new.bin \ >> + bl2 >> + >> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ >> + --output fip/bl30_new.bin.g12a.enc \ >> + --level v3 >> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ >> + --output fip/bl30_new.bin.enc \ >> + --level v3 --type bl30 >> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ >> + --output fip/bl31.img.enc \ >> + --level v3 --type bl31 >> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ >> + --output fip/bl33.bin.enc \ >> + --level v3 --type bl33 --compress lz4 >> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ >> + --output fip/bl2.n.bin.sig >> + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \ >> + --output fip/u-boot.bin \ >> + --bl2 fip/bl2.n.bin.sig \ >> + --bl30 fip/bl30_new.bin.enc \ >> + --bl31 fip/bl31.img.enc \ >> + --bl33 fip/bl33.bin.enc \ >> + --ddrfw1 fip/ddr4_1d.fw \ >> + --ddrfw2 fip/ddr4_2d.fw \ >> + --ddrfw3 fip/ddr3_1d.fw \ >> + --ddrfw4 fip/piei.fw \ >> + --ddrfw5 fip/lpddr4_1d.fw \ >> + --ddrfw6 fip/lpddr4_2d.fw \ >> + --ddrfw7 fip/diag_lpddr4.fw \ >> + --ddrfw8 fip/aml_ddr.fw \ >> + --ddrfw9 fip/lpddr3_1d.fw \ >> + --level v3 >> >> and then write the image to SD with: >> >> - > DEV=/dev/your_sd_device >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> +.. code-block:: bash >> + >> + $ DEV=/dev/your_sd_device >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> diff --git a/board/amlogic/p212/README.libretech-ac b/doc/board/amlogic/libretech-ac.rst >> similarity index 21% >> rename from board/amlogic/p212/README.libretech-ac >> rename to doc/board/amlogic/libretech-ac.rst >> index 3f713ec326..31fe4985e7 100644 >> --- a/board/amlogic/p212/README.libretech-ac >> +++ b/doc/board/amlogic/libretech-ac.rst >> @@ -16,87 +16,93 @@ with the following specifications: >> >> Schematics are available on the manufacturer website. >> >> -Currently the U-Boot port supports the following devices: >> - - serial >> - - eMMC >> - - Ethernet >> - - USB >> - >> U-Boot compilation >> -================== >> +------------------ >> + >> +.. code-block:: bash >> >> - > export CROSS_COMPILE=aarch64-none-elf- >> - > make libretech-ac_defconfig >> - > make >> + $ export CROSS_COMPILE=aarch64-none-elf- >> + $ make libretech-ac_defconfig >> + $ make >> >> Image creation >> -============== >> +-------------- >> >> Amlogic doesn't provide sources for the firmware and for tools needed >> to create the bootloader image, so it is necessary to obtain them from >> the git tree published by the board vendor: >> >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> - > git clone https://github.com/BayLibre/u-boot.git -b libretech-ac amlogic-u-boot >> - > cd amlogic-u-boot >> - > wget https://raw.githubusercontent.com/BayLibre/u-boot/libretech-cc/fip/blx_fix.sh >> - > make libretech_ac_defconfig >> - > make >> - > export UBOOTDIR=$PWD >> +.. code-block:: bash >> + >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> + $ git clone https://github.com/BayLibre/u-boot.git -b libretech-ac amlogic-u-boot >> + $ cd amlogic-u-boot >> + $ wget https://raw.githubusercontent.com/BayLibre/u-boot/libretech-cc/fip/blx_fix.sh >> + $ make libretech_ac_defconfig >> + $ make >> + $ export UBOOTDIR=$PWD >> >> Download the latest Amlogic Buildroot package, and extract it : >> - > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz >> - > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180418/bootloader >> - > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180418 >> + >> +.. code-block:: bash >> + >> + $ wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz >> + $ tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180418.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180418/bootloader >> + $ export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180418 >> >> Go back to mainline U-Boot source tree then : >> - > mkdir fip >> - >> - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ >> - > cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/bl21.bin fip/ >> - > cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/acs.bin fip/ >> - > cp $BRDIR/bootloader/uboot-repo/bl2/bin/gxl/bl2.bin fip/ >> - > cp $BRDIR/bootloader/uboot-repo/bl30/bin/gxl/bl30.bin fip/ >> - > cp $BRDIR/bootloader/uboot-repo/bl31/bin/gxl/bl31.img fip/ >> - > cp u-boot.bin fip/bl33.bin >> - >> - > sh $UBOOTDIR/blx_fix.sh \ >> - fip/bl30.bin \ >> - fip/zero_tmp \ >> - fip/bl30_zero.bin \ >> - fip/bl301.bin \ >> - fip/bl301_zero.bin \ >> - fip/bl30_new.bin \ >> - bl30 >> - >> - > $BRDIR/bootloader/uboot-repo/fip/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> - >> - > sh $UBOOTDIR/blx_fix.sh \ >> - fip/bl2_acs.bin \ >> - fip/zero_tmp \ >> - fip/bl2_zero.bin \ >> - fip/bl21.bin \ >> - fip/bl21_zero.bin \ >> - fip/bl2_new.bin \ >> - bl2 >> - >> - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig >> - > $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bootmk \ >> - --output fip/u-boot.bin \ >> - --bl2 fip/bl2.n.bin.sig \ >> - --bl30 fip/bl30_new.bin.enc \ >> - --bl31 fip/bl31.img.enc \ >> - --bl33 fip/bl33.bin.enc >> + >> +.. code-block:: bash >> + >> + $ mkdir fip >> + >> + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ >> + $ cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/bl21.bin fip/ >> + $ cp $UBOOTDIR/build/board/amlogic/libretech_ac/firmware/acs.bin fip/ >> + $ cp $BRDIR/bootloader/uboot-repo/bl2/bin/gxl/bl2.bin fip/ >> + $ cp $BRDIR/bootloader/uboot-repo/bl30/bin/gxl/bl30.bin fip/ >> + $ cp $BRDIR/bootloader/uboot-repo/bl31/bin/gxl/bl31.img fip/ >> + $ cp u-boot.bin fip/bl33.bin >> + >> + $ sh $UBOOTDIR/blx_fix.sh \ >> + fip/bl30.bin \ >> + fip/zero_tmp \ >> + fip/bl30_zero.bin \ >> + fip/bl301.bin \ >> + fip/bl301_zero.bin \ >> + fip/bl30_new.bin \ >> + bl30 >> + >> + $ $BRDIR/bootloader/uboot-repo/fip/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> + >> + $ sh $UBOOTDIR/blx_fix.sh \ >> + fip/bl2_acs.bin \ >> + fip/zero_tmp \ >> + fip/bl2_zero.bin \ >> + fip/bl21.bin \ >> + fip/bl21_zero.bin \ >> + fip/bl2_new.bin \ >> + bl2 >> + >> + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig >> + $ $BRDIR/bootloader/uboot-repo/fip/gxl/aml_encrypt_gxl --bootmk \ >> + --output fip/u-boot.bin \ >> + --bl2 fip/bl2.n.bin.sig \ >> + --bl30 fip/bl30_new.bin.enc \ >> + --bl31 fip/bl31.img.enc \ >> + --bl33 fip/bl33.bin.enc >> >> and then write the image to SD with: >> >> - > DEV=/dev/your_sd_device >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> +.. code-block:: bash >> + >> + $ DEV=/dev/your_sd_device >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> diff --git a/board/amlogic/p212/README.libretech-cc b/doc/board/amlogic/libretech-cc.rst >> similarity index 46% >> rename from board/amlogic/p212/README.libretech-cc >> rename to doc/board/amlogic/libretech-cc.rst >> index 74434d4435..5657f2c887 100644 >> --- a/board/amlogic/p212/README.libretech-cc >> +++ b/doc/board/amlogic/libretech-cc.rst >> @@ -16,26 +16,17 @@ with the following specifications: >> >> Schematics are available on the manufacturer website. >> >> -Currently the U-Boot port supports the following devices: >> - - serial >> - - eMMC, microSD >> - - Ethernet >> - - I2C >> - - Regulators >> - - Reset controller >> - - Clock controller >> - - USB Host >> - - ADC >> - >> U-Boot compilation >> -================== >> +------------------ >> + >> +.. code-block:: bash >> >> - > export CROSS_COMPILE=aarch64-none-elf- >> - > make libretech-cc_defconfig >> - > make >> + $ export CROSS_COMPILE=aarch64-none-elf- >> + $ make libretech-cc_defconfig >> + $ make >> >> Image creation >> -============== >> +-------------- >> >> To boot the system, u-boot must be combined with several earlier stage >> bootloaders: >> @@ -53,74 +44,82 @@ for convenience at <https://github.com/BayLibre/u-boot/releases/> >> Download and extract the libretech-cc release from there, and set FIPDIR to >> point to the `fip` subdirectory. >> >> - > export FIPDIR=/path/to/extracted/fip >> +.. code-block:: bash >> + >> + $ export FIPDIR=/path/to/extracted/fip >> >> Alternatively, you can obtain the original vendor u-boot tree which >> contains the required blobs and sources, and build yourself. >> Note that old compilers are required for this to build. The compilers here >> are suggested by Amlogic, and they are 32-bit x86 binaries. >> >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> - > git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot >> - > cd amlogic-u-boot >> - > make libretech_cc_defconfig >> - > make >> - > export FIPDIR=$PWD/fip >> +.. code-block:: bash >> + >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> + $ git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot >> + $ cd amlogic-u-boot >> + $ make libretech_cc_defconfig >> + $ make >> + $ export FIPDIR=$PWD/fip >> >> Once you have the binaries available (either through the prebuilt download, >> or having built the vendor u-boot yourself), you can then proceed to glue >> everything together. Go back to mainline U-Boot source tree then : >> >> - > mkdir fip >> - >> - > cp $FIPDIR/gxl/bl2.bin fip/ >> - > cp $FIPDIR/gxl/acs.bin fip/ >> - > cp $FIPDIR/gxl/bl21.bin fip/ >> - > cp $FIPDIR/gxl/bl30.bin fip/ >> - > cp $FIPDIR/gxl/bl301.bin fip/ >> - > cp $FIPDIR/gxl/bl31.img fip/ >> - > cp u-boot.bin fip/bl33.bin >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl30.bin \ >> - fip/zero_tmp \ >> - fip/bl30_zero.bin \ >> - fip/bl301.bin \ >> - fip/bl301_zero.bin \ >> - fip/bl30_new.bin \ >> - bl30 >> - >> - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl2_acs.bin \ >> - fip/zero_tmp \ >> - fip/bl2_zero.bin \ >> - fip/bl21.bin \ >> - fip/bl21_zero.bin \ >> - fip/bl2_new.bin \ >> - bl2 >> - >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig >> - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ >> - --output fip/u-boot.bin \ >> - --bl2 fip/bl2.n.bin.sig \ >> - --bl30 fip/bl30_new.bin.enc \ >> - --bl31 fip/bl31.img.enc \ >> - --bl33 fip/bl33.bin.enc >> +.. code-block:: bash >> + >> + $ mkdir fip >> + >> + $ cp $FIPDIR/gxl/bl2.bin fip/ >> + $ cp $FIPDIR/gxl/acs.bin fip/ >> + $ cp $FIPDIR/gxl/bl21.bin fip/ >> + $ cp $FIPDIR/gxl/bl30.bin fip/ >> + $ cp $FIPDIR/gxl/bl301.bin fip/ >> + $ cp $FIPDIR/gxl/bl31.img fip/ >> + $ cp u-boot.bin fip/bl33.bin >> + >> + $ $FIPDIR/blx_fix.sh \ >> + fip/bl30.bin \ >> + fip/zero_tmp \ >> + fip/bl30_zero.bin \ >> + fip/bl301.bin \ >> + fip/bl301_zero.bin \ >> + fip/bl30_new.bin \ >> + bl30 >> + >> + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> + >> + $ $FIPDIR/blx_fix.sh \ >> + fip/bl2_acs.bin \ >> + fip/zero_tmp \ >> + fip/bl2_zero.bin \ >> + fip/bl21.bin \ >> + fip/bl21_zero.bin \ >> + fip/bl2_new.bin \ >> + bl2 >> + >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ >> + --output fip/u-boot.bin \ >> + --bl2 fip/bl2.n.bin.sig \ >> + --bl30 fip/bl30_new.bin.enc \ >> + --bl31 fip/bl31.img.enc \ >> + --bl33 fip/bl33.bin.enc >> >> and then write the image to SD with: >> >> - > DEV=/dev/your_sd_device >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> +.. code-block:: bash >> + >> + $ DEV=/dev/your_sd_device >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> >> Note that Amlogic provides aml_encrypt_gxl as a 32-bit x86 binary with no >> source code. Should you prefer to avoid that, there are open source reverse >> diff --git a/board/amlogic/p200/README.nanopi-k2 b/doc/board/amlogic/nanopi-k2.rst >> similarity index 24% >> rename from board/amlogic/p200/README.nanopi-k2 >> rename to doc/board/amlogic/nanopi-k2.rst >> index c8dec3569b..b8147de61c 100644 >> --- a/board/amlogic/p200/README.nanopi-k2 >> +++ b/doc/board/amlogic/nanopi-k2.rst >> @@ -16,83 +16,87 @@ with the following specifications: >> >> Schematics are available on the manufacturer website. >> >> -Currently the u-boot port supports the following devices: >> - - serial >> - - eMMC, microSD >> - - Ethernet >> +U-Boot compilation >> +------------------ >> >> -u-boot compilation >> -================== >> +.. code-block:: bash >> >> - > export CROSS_COMPILE=aarch64-none-elf- >> - > make nanopi-k2_defconfig >> - > make >> + $ export CROSS_COMPILE=aarch64-none-elf- >> + $ make nanopi-k2_defconfig >> + $ make >> >> Image creation >> -============== >> +-------------- >> >> Amlogic doesn't provide sources for the firmware and for tools needed >> to create the bootloader image, so it is necessary to obtain them from >> the git tree published by the board vendor: >> >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> - > git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot >> - > git clone https://github.com/friendlyarm/u-boot.git -b nanopi-k2-v2015.01 amlogic-u-boot >> - > cd amlogic-u-boot >> - > sed -i 's/aarch64-linux-gnu-/aarch64-none-elf-/' Makefile >> - > sed -i 's/arm-linux-/arm-none-eabi-/' arch/arm/cpu/armv8/gxb/firmware/scp_task/Makefile >> - > make nanopi-k2_defconfig >> - > make >> - > export FIPDIR=$PWD/fip >> +.. code-block:: bash >> + >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> + $ git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot >> + $ git clone https://github.com/friendlyarm/u-boot.git -b nanopi-k2-v2015.01 amlogic-u-boot >> + $ cd amlogic-u-boot >> + $ sed -i 's/aarch64-linux-gnu-/aarch64-none-elf-/' Makefile >> + $ sed -i 's/arm-linux-/arm-none-eabi-/' arch/arm/cpu/armv8/gxb/firmware/scp_task/Makefile >> + $ make nanopi-k2_defconfig >> + $ make >> + $ export FIPDIR=$PWD/fip >> >> Go back to mainline U-Boot source tree then : >> - > mkdir fip >> - >> - > cp $FIPDIR/gxb/bl2.bin fip/ >> - > cp $FIPDIR/gxb/acs.bin fip/ >> - > cp $FIPDIR/gxb/bl21.bin fip/ >> - > cp $FIPDIR/gxb/bl30.bin fip/ >> - > cp $FIPDIR/gxb/bl301.bin fip/ >> - > cp $FIPDIR/gxb/bl31.img fip/ >> - > cp u-boot.bin fip/bl33.bin >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl30.bin \ >> - fip/zero_tmp \ >> - fip/bl30_zero.bin \ >> - fip/bl301.bin \ >> - fip/bl301_zero.bin \ >> - fip/bl30_new.bin \ >> - bl30 >> - >> - > $FIPDIR/fip_create \ >> - --bl30 fip/bl30_new.bin \ >> - --bl31 fip/bl31.img \ >> - --bl33 fip/bl33.bin \ >> - fip/fip.bin >> - >> - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl2_acs.bin \ >> - fip/zero_tmp \ >> - fip/bl2_zero.bin \ >> - fip/bl21.bin \ >> - fip/bl21_zero.bin \ >> - fip/bl2_new.bin \ >> - bl2 >> - >> - > cat fip/bl2_new.bin fip/fip.bin > fip/boot_new.bin >> - >> - > $FIPDIR/gxb/aml_encrypt_gxb --bootsig \ >> - --input fip/boot_new.bin >> - --output fip/u-boot.bin >> + >> +.. code-block:: bash >> + >> + $ mkdir fip >> + >> + $ cp $FIPDIR/gxb/bl2.bin fip/ >> + $ cp $FIPDIR/gxb/acs.bin fip/ >> + $ cp $FIPDIR/gxb/bl21.bin fip/ >> + $ cp $FIPDIR/gxb/bl30.bin fip/ >> + $ cp $FIPDIR/gxb/bl301.bin fip/ >> + $ cp $FIPDIR/gxb/bl31.img fip/ >> + $ cp u-boot.bin fip/bl33.bin >> + >> + $ $FIPDIR/blx_fix.sh \ >> + fip/bl30.bin \ >> + fip/zero_tmp \ >> + fip/bl30_zero.bin \ >> + fip/bl301.bin \ >> + fip/bl301_zero.bin \ >> + fip/bl30_new.bin \ >> + bl30 >> + >> + $ $FIPDIR/fip_create \ >> + --bl30 fip/bl30_new.bin \ >> + --bl31 fip/bl31.img \ >> + --bl33 fip/bl33.bin \ >> + fip/fip.bin >> + >> + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> + >> + $ $FIPDIR/blx_fix.sh \ >> + fip/bl2_acs.bin \ >> + fip/zero_tmp \ >> + fip/bl2_zero.bin \ >> + fip/bl21.bin \ >> + fip/bl21_zero.bin \ >> + fip/bl2_new.bin \ >> + bl2 >> + >> + $ cat fip/bl2_new.bin fip/fip.bin > fip/boot_new.bin >> + >> + $ $FIPDIR/gxb/aml_encrypt_gxb --bootsig \ >> + --input fip/boot_new.bin >> + --output fip/u-boot.bin >> >> and then write the image to SD with: >> >> - > DEV=/dev/your_sd_device >> - > dd if=fip/u-boot.bin of=$DEV conv=fsync,notrunc bs=512 seek=1 >> +.. code-block:: bash >> + >> + $ DEV=/dev/your_sd_device >> + $ dd if=fip/u-boot.bin of=$DEV conv=fsync,notrunc bs=512 seek=1 >> diff --git a/board/amlogic/p200/README.odroid-c2 b/doc/board/amlogic/odroid-c2.rst >> similarity index 56% >> rename from board/amlogic/p200/README.odroid-c2 >> rename to doc/board/amlogic/odroid-c2.rst >> index 3b9f80df29..7b518fc26a 100644 >> --- a/board/amlogic/p200/README.odroid-c2 >> +++ b/doc/board/amlogic/odroid-c2.rst >> @@ -16,50 +16,46 @@ Co. Ltd with the following specifications: >> >> Schematics are available on the manufacturer website. >> >> -Currently the u-boot port supports the following devices: >> - - serial >> - - eMMC, microSD >> - - Ethernet >> - - I2C >> - - Regulators >> - - Reset controller >> - - Clock controller >> - - ADC >> +U-Boot compilation >> +------------------ >> >> -u-boot compilation >> -================== >> +.. code-block:: bash >> >> - > export CROSS_COMPILE=aarch64-none-elf- >> - > make odroid-c2_defconfig >> - > make >> + $ export CROSS_COMPILE=aarch64-none-elf- >> + $ make odroid-c2_defconfig >> + $ make >> >> Image creation >> -============== >> +-------------- >> >> Amlogic doesn't provide sources for the firmware and for tools needed >> to create the bootloader image, so it is necessary to obtain them from >> the git tree published by the board vendor: >> >> - > DIR=odroid-c2 >> - > git clone --depth 1 \ >> +.. code-block:: bash >> + >> + $ DIR=odroid-c2 >> + $ git clone --depth 1 \ >> https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \ >> $DIR >> - > $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \ >> + $ $DIR/fip/fip_create --bl30 $DIR/fip/gxb/bl30.bin \ >> --bl301 $DIR/fip/gxb/bl301.bin \ >> --bl31 $DIR/fip/gxb/bl31.bin \ >> --bl33 u-boot.bin \ >> $DIR/fip.bin >> - > $DIR/fip/fip_create --dump $DIR/fip.bin >> - > cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin >> - > $DIR/fip/gxb/aml_encrypt_gxb --bootsig \ >> + $ $DIR/fip/fip_create --dump $DIR/fip.bin >> + $ cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin >> + $ $DIR/fip/gxb/aml_encrypt_gxb --bootsig \ >> --input $DIR/boot_new.bin \ >> --output $DIR/u-boot.img >> - > dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96 >> + $ dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96 >> >> and then write the image to SD with: >> >> - > DEV=/dev/your_sd_device >> - > BL1=$DIR/sd_fuse/bl1.bin.hardkernel >> - > dd if=$BL1 of=$DEV conv=fsync bs=1 count=442 >> - > dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1 >> - > dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97 >> +.. code-block:: bash >> + >> + $ DEV=/dev/your_sd_device >> + $ BL1=$DIR/sd_fuse/bl1.bin.hardkernel >> + $ dd if=$BL1 of=$DEV conv=fsync bs=1 count=442 >> + $ dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1 >> + $ dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97 >> diff --git a/board/amlogic/w400/README.odroid-n2 b/doc/board/amlogic/odroid-n2.rst >> similarity index 19% >> rename from board/amlogic/w400/README.odroid-n2 >> rename to doc/board/amlogic/odroid-n2.rst >> index 8142eebea0..b7b9cccfa8 100644 >> --- a/board/amlogic/w400/README.odroid-n2 >> +++ b/doc/board/amlogic/odroid-n2.rst >> @@ -15,115 +15,114 @@ Co. Ltd with the following specifications: >> >> Schematics are available on the manufacturer website. >> >> -Currently the u-boot port supports the following devices: >> - - serial >> - - eMMC, microSD >> - - Ethernet >> - - I2C >> - - Regulators >> - - Reset controller >> - - Clock controller >> - - ADC >> +U-Boot compilation >> +------------------ >> >> -u-boot compilation >> -================== >> +.. code-block:: bash >> >> - > export CROSS_COMPILE=aarch64-none-elf- >> - > make odroid-n2_defconfig >> - > make >> + $ export CROSS_COMPILE=aarch64-none-elf- >> + $ make odroid-n2_defconfig >> + $ make >> >> Image creation >> -============== >> +-------------- >> >> Amlogic doesn't provide sources for the firmware and for tools needed >> to create the bootloader image, so it is necessary to obtain them from >> the git tree published by the board vendor: >> >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> +.. code-block:: bash >> + >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> >> - > DIR=odroid-n2 >> - > git clone --depth 1 \ >> + $ DIR=odroid-n2 >> + $ git clone --depth 1 \ >> https://github.com/hardkernel/u-boot.git -b odroidn2-v2015.01 \ >> $DIR >> >> - > cd odroid-n2 >> - > make odroidn2_defconfig >> - > make >> - > export UBOOTDIR=$PWD >> + $ cd odroid-n2 >> + $ make odroidn2_defconfig >> + $ make >> + $ export UBOOTDIR=$PWD >> >> Go back to mainline U-Boot source tree then : >> - > mkdir fip >> - >> - > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh >> - > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ >> - > cp $UBOOTDIR/build/board/hardkernel/odroidn2/firmware/acs.bin fip/ >> - > cp $UBOOTDIR/fip/g12b/bl2.bin fip/ >> - > cp $UBOOTDIR/fip/g12b/bl30.bin fip/ >> - > cp $UBOOTDIR/fip/g12b/bl31.img fip/ >> - > cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ >> - > cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ >> - > cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ >> - > cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ >> - > cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ >> - > cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ >> - > cp $UBOOTDIR/fip/g12b/piei.fw fip/ >> - > cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ >> - > cp u-boot.bin fip/bl33.bin >> - >> - > sh fip/blx_fix.sh \ >> - fip/bl30.bin \ >> - fip/zero_tmp \ >> - fip/bl30_zero.bin \ >> - fip/bl301.bin \ >> - fip/bl301_zero.bin \ >> - fip/bl30_new.bin \ >> - bl30 >> - >> - > sh fip/blx_fix.sh \ >> - fip/bl2.bin \ >> - fip/zero_tmp \ >> - fip/bl2_zero.bin \ >> - fip/acs.bin \ >> - fip/bl21_zero.bin \ >> - fip/bl2_new.bin \ >> - bl2 >> - >> - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ >> - --output fip/bl30_new.bin.g12a.enc \ >> - --level v3 >> - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ >> - --output fip/bl30_new.bin.enc \ >> - --level v3 --type bl30 >> - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ >> - --output fip/bl31.img.enc \ >> - --level v3 --type bl31 >> - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ >> - --output fip/bl33.bin.enc \ >> - --level v3 --type bl33 --compress lz4 >> - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ >> - --output fip/bl2.n.bin.sig >> - > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ >> - --output fip/u-boot.bin \ >> - --bl2 fip/bl2.n.bin.sig \ >> - --bl30 fip/bl30_new.bin.enc \ >> - --bl31 fip/bl31.img.enc \ >> - --bl33 fip/bl33.bin.enc \ >> - --ddrfw1 fip/ddr4_1d.fw \ >> - --ddrfw2 fip/ddr4_2d.fw \ >> - --ddrfw3 fip/ddr3_1d.fw \ >> - --ddrfw4 fip/piei.fw \ >> - --ddrfw5 fip/lpddr4_1d.fw \ >> - --ddrfw6 fip/lpddr4_2d.fw \ >> - --ddrfw7 fip/diag_lpddr4.fw \ >> - --ddrfw8 fip/aml_ddr.fw \ >> - --level v3 >> + >> +.. code-block:: bash >> + >> + $ mkdir fip >> + >> + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh >> + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ >> + $ cp $UBOOTDIR/build/board/hardkernel/odroidn2/firmware/acs.bin fip/ >> + $ cp $UBOOTDIR/fip/g12b/bl2.bin fip/ >> + $ cp $UBOOTDIR/fip/g12b/bl30.bin fip/ >> + $ cp $UBOOTDIR/fip/g12b/bl31.img fip/ >> + $ cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ >> + $ cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ >> + $ cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ >> + $ cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ >> + $ cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ >> + $ cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ >> + $ cp $UBOOTDIR/fip/g12b/piei.fw fip/ >> + $ cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ >> + $ cp u-boot.bin fip/bl33.bin >> + >> + $ sh fip/blx_fix.sh \ >> + fip/bl30.bin \ >> + fip/zero_tmp \ >> + fip/bl30_zero.bin \ >> + fip/bl301.bin \ >> + fip/bl301_zero.bin \ >> + fip/bl30_new.bin \ >> + bl30 >> + >> + $ sh fip/blx_fix.sh \ >> + fip/bl2.bin \ >> + fip/zero_tmp \ >> + fip/bl2_zero.bin \ >> + fip/acs.bin \ >> + fip/bl21_zero.bin \ >> + fip/bl2_new.bin \ >> + bl2 >> + >> + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ >> + --output fip/bl30_new.bin.g12a.enc \ >> + --level v3 >> + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ >> + --output fip/bl30_new.bin.enc \ >> + --level v3 --type bl30 >> + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ >> + --output fip/bl31.img.enc \ >> + --level v3 --type bl31 >> + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ >> + --output fip/bl33.bin.enc \ >> + --level v3 --type bl33 --compress lz4 >> + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ >> + --output fip/bl2.n.bin.sig >> + $ $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ >> + --output fip/u-boot.bin \ >> + --bl2 fip/bl2.n.bin.sig \ >> + --bl30 fip/bl30_new.bin.enc \ >> + --bl31 fip/bl31.img.enc \ >> + --bl33 fip/bl33.bin.enc \ >> + --ddrfw1 fip/ddr4_1d.fw \ >> + --ddrfw2 fip/ddr4_2d.fw \ >> + --ddrfw3 fip/ddr3_1d.fw \ >> + --ddrfw4 fip/piei.fw \ >> + --ddrfw5 fip/lpddr4_1d.fw \ >> + --ddrfw6 fip/lpddr4_2d.fw \ >> + --ddrfw7 fip/diag_lpddr4.fw \ >> + --ddrfw8 fip/aml_ddr.fw \ >> + --level v3 >> >> and then write the image to SD with: >> >> - > DEV=/dev/your_sd_device >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> +.. code-block:: bash >> + >> + $ DEV=/dev/your_sd_device >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> diff --git a/board/amlogic/p200/README.p200 b/doc/board/amlogic/p200.rst >> similarity index 24% >> rename from board/amlogic/p200/README.p200 >> rename to doc/board/amlogic/p200.rst >> index 84d5ca5356..b6103b25fe 100644 >> --- a/board/amlogic/p200/README.p200 >> +++ b/doc/board/amlogic/p200.rst >> @@ -17,86 +17,84 @@ specifications: >> >> Schematics are available from Amlogic on demand. >> >> -Currently the u-boot port supports the following devices: >> - - serial >> - - eMMC, microSD >> - - Ethernet >> - - I2C >> - - Regulators >> - - Reset controller >> - - Clock controller >> - - USB Host >> - - ADC >> +U-Boot compilation >> +------------------ >> >> -u-boot compilation >> -================== >> +.. code-block:: bash >> >> - > export CROSS_COMPILE=aarch64-none-elf- >> - > make p200_defconfig >> - > make >> + $ export CROSS_COMPILE=aarch64-none-elf- >> + $ make p200_defconfig >> + $ make >> >> Image creation >> -============== >> +-------------- >> >> Amlogic doesn't provide sources for the firmware and for tools needed >> to create the bootloader image, so it is necessary to obtain them from >> the git tree published by the board vendor: >> >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot >> - > cd amlogic-u-boot >> - > make gxb_p200_v1_defconfig >> - > make >> - > export FIPDIR=$PWD/fip >> +.. code-block:: bash >> + >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot >> + $ cd amlogic-u-boot >> + $ make gxb_p200_v1_defconfig >> + $ make >> + $ export FIPDIR=$PWD/fip >> >> Go back to mainline U-boot source tree then : >> - > mkdir fip >> - >> - > cp $FIPDIR/gxl/bl2.bin fip/ >> - > cp $FIPDIR/gxl/acs.bin fip/ >> - > cp $FIPDIR/gxl/bl21.bin fip/ >> - > cp $FIPDIR/gxl/bl30.bin fip/ >> - > cp $FIPDIR/gxl/bl301.bin fip/ >> - > cp $FIPDIR/gxl/bl31.img fip/ >> - > cp u-boot.bin fip/bl33.bin >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl30.bin \ >> - fip/zero_tmp \ >> - fip/bl30_zero.bin \ >> - fip/bl301.bin \ >> - fip/bl301_zero.bin \ >> - fip/bl30_new.bin \ >> - bl30 >> - >> - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl2_acs.bin \ >> - fip/zero_tmp \ >> - fip/bl2_zero.bin \ >> - fip/bl21.bin \ >> - fip/bl21_zero.bin \ >> - fip/bl2_new.bin \ >> - bl2 >> - >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig >> - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ >> - --output fip/u-boot.bin \ >> - --bl2 fip/bl2.n.bin.sig \ >> - --bl30 fip/bl30_new.bin.enc \ >> - --bl31 fip/bl31.img.enc \ >> - --bl33 fip/bl33.bin.enc >> + >> +.. code-block:: bash >> + >> + $ mkdir fip >> + >> + $ cp $FIPDIR/gxl/bl2.bin fip/ >> + $ cp $FIPDIR/gxl/acs.bin fip/ >> + $ cp $FIPDIR/gxl/bl21.bin fip/ >> + $ cp $FIPDIR/gxl/bl30.bin fip/ >> + $ cp $FIPDIR/gxl/bl301.bin fip/ >> + $ cp $FIPDIR/gxl/bl31.img fip/ >> + $ cp u-boot.bin fip/bl33.bin >> + >> + $ $FIPDIR/blx_fix.sh \ >> + fip/bl30.bin \ >> + fip/zero_tmp \ >> + fip/bl30_zero.bin \ >> + fip/bl301.bin \ >> + fip/bl301_zero.bin \ >> + fip/bl30_new.bin \ >> + bl30 >> + >> + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> + >> + $ $FIPDIR/blx_fix.sh \ >> + fip/bl2_acs.bin \ >> + fip/zero_tmp \ >> + fip/bl2_zero.bin \ >> + fip/bl21.bin \ >> + fip/bl21_zero.bin \ >> + fip/bl2_new.bin \ >> + bl2 >> + >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ >> + --output fip/u-boot.bin \ >> + --bl2 fip/bl2.n.bin.sig \ >> + --bl30 fip/bl30_new.bin.enc \ >> + --bl31 fip/bl31.img.enc \ >> + --bl33 fip/bl33.bin.enc >> >> and then write the image to SD with: >> >> - > DEV=/dev/your_sd_device >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> +.. code-block:: bash >> + >> + $ DEV=/dev/your_sd_device >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> diff --git a/board/amlogic/p201/README.p201 b/doc/board/amlogic/p201.rst >> similarity index 24% >> rename from board/amlogic/p201/README.p201 >> rename to doc/board/amlogic/p201.rst >> index 4bb5e95905..da14f84ac2 100644 >> --- a/board/amlogic/p201/README.p201 >> +++ b/doc/board/amlogic/p201.rst >> @@ -17,86 +17,84 @@ specifications: >> >> Schematics are available from Amlogic on demand. >> >> -Currently the u-boot port supports the following devices: >> - - serial >> - - eMMC, microSD >> - - Ethernet >> - - I2C >> - - Regulators >> - - Reset controller >> - - Clock controller >> - - USB Host >> - - ADC >> +U-Boot compilation >> +------------------ >> >> -u-boot compilation >> -================== >> +.. code-block:: bash >> >> - > export CROSS_COMPILE=aarch64-none-elf- >> - > make p201_defconfig >> - > make >> + $ export CROSS_COMPILE=aarch64-none-elf- >> + $ make p201_defconfig >> + $ make >> >> Image creation >> -============== >> +-------------- >> >> Amlogic doesn't provide sources for the firmware and for tools needed >> to create the bootloader image, so it is necessary to obtain them from >> the git tree published by the board vendor: >> >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot >> - > cd amlogic-u-boot >> - > make gxb_p201_v1_defconfig >> - > make >> - > export FIPDIR=$PWD/fip >> +.. code-block:: bash >> + >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot >> + $ cd amlogic-u-boot >> + $ make gxb_p201_v1_defconfig >> + $ make >> + $ export FIPDIR=$PWD/fip >> >> Go back to mainline U-boot source tree then : >> - > mkdir fip >> - >> - > cp $FIPDIR/gxl/bl2.bin fip/ >> - > cp $FIPDIR/gxl/acs.bin fip/ >> - > cp $FIPDIR/gxl/bl21.bin fip/ >> - > cp $FIPDIR/gxl/bl30.bin fip/ >> - > cp $FIPDIR/gxl/bl301.bin fip/ >> - > cp $FIPDIR/gxl/bl31.img fip/ >> - > cp u-boot.bin fip/bl33.bin >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl30.bin \ >> - fip/zero_tmp \ >> - fip/bl30_zero.bin \ >> - fip/bl301.bin \ >> - fip/bl301_zero.bin \ >> - fip/bl30_new.bin \ >> - bl30 >> - >> - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl2_acs.bin \ >> - fip/zero_tmp \ >> - fip/bl2_zero.bin \ >> - fip/bl21.bin \ >> - fip/bl21_zero.bin \ >> - fip/bl2_new.bin \ >> - bl2 >> - >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig >> - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ >> - --output fip/u-boot.bin \ >> - --bl2 fip/bl2.n.bin.sig \ >> - --bl30 fip/bl30_new.bin.enc \ >> - --bl31 fip/bl31.img.enc \ >> - --bl33 fip/bl33.bin.enc >> + >> +.. code-block:: bash >> + >> + $ mkdir fip >> + >> + $ cp $FIPDIR/gxl/bl2.bin fip/ >> + $ cp $FIPDIR/gxl/acs.bin fip/ >> + $ cp $FIPDIR/gxl/bl21.bin fip/ >> + $ cp $FIPDIR/gxl/bl30.bin fip/ >> + $ cp $FIPDIR/gxl/bl301.bin fip/ >> + $ cp $FIPDIR/gxl/bl31.img fip/ >> + $ cp u-boot.bin fip/bl33.bin >> + >> + $ $FIPDIR/blx_fix.sh \ >> + fip/bl30.bin \ >> + fip/zero_tmp \ >> + fip/bl30_zero.bin \ >> + fip/bl301.bin \ >> + fip/bl301_zero.bin \ >> + fip/bl30_new.bin \ >> + bl30 >> + >> + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> + >> + $ $FIPDIR/blx_fix.sh \ >> + fip/bl2_acs.bin \ >> + fip/zero_tmp \ >> + fip/bl2_zero.bin \ >> + fip/bl21.bin \ >> + fip/bl21_zero.bin \ >> + fip/bl2_new.bin \ >> + bl2 >> + >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ >> + --output fip/u-boot.bin \ >> + --bl2 fip/bl2.n.bin.sig \ >> + --bl30 fip/bl30_new.bin.enc \ >> + --bl31 fip/bl31.img.enc \ >> + --bl33 fip/bl33.bin.enc >> >> and then write the image to SD with: >> >> - > DEV=/dev/your_sd_device >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> +.. code-block:: bash >> + >> + $ DEV=/dev/your_sd_device >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> diff --git a/board/amlogic/p212/README.p212 b/doc/board/amlogic/p212.rst >> similarity index 24% >> rename from board/amlogic/p212/README.p212 >> rename to doc/board/amlogic/p212.rst >> index 3776f24493..c6c375077d 100644 >> --- a/board/amlogic/p212/README.p212 >> +++ b/doc/board/amlogic/p212.rst >> @@ -17,86 +17,84 @@ specifications: >> >> Schematics are available from Amlogic on demand. >> >> -Currently the u-boot port supports the following devices: >> - - serial >> - - eMMC, microSD >> - - Ethernet >> - - I2C >> - - Regulators >> - - Reset controller >> - - Clock controller >> - - USB Host >> - - ADC >> +U-Boot compilation >> +------------------ >> >> -u-boot compilation >> -================== >> +.. code-block:: bash >> >> - > export CROSS_COMPILE=aarch64-none-elf- >> - > make p212_defconfig >> - > make >> + $ export CROSS_COMPILE=aarch64-none-elf- >> + $ make p212_defconfig >> + $ make >> >> Image creation >> -============== >> +-------------- >> >> Amlogic doesn't provide sources for the firmware and for tools needed >> to create the bootloader image, so it is necessary to obtain them from >> the git tree published by the board vendor: >> >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot >> - > cd amlogic-u-boot >> - > make gxl_p212_v1_defconfig >> - > make >> - > export FIPDIR=$PWD/fip >> +.. code-block:: bash >> + >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot >> + $ cd amlogic-u-boot >> + $ make gxl_p212_v1_defconfig >> + $ make >> + $ export FIPDIR=$PWD/fip >> >> Go back to mainline U-boot source tree then : >> - > mkdir fip >> - >> - > cp $FIPDIR/gxl/bl2.bin fip/ >> - > cp $FIPDIR/gxl/acs.bin fip/ >> - > cp $FIPDIR/gxl/bl21.bin fip/ >> - > cp $FIPDIR/gxl/bl30.bin fip/ >> - > cp $FIPDIR/gxl/bl301.bin fip/ >> - > cp $FIPDIR/gxl/bl31.img fip/ >> - > cp u-boot.bin fip/bl33.bin >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl30.bin \ >> - fip/zero_tmp \ >> - fip/bl30_zero.bin \ >> - fip/bl301.bin \ >> - fip/bl301_zero.bin \ >> - fip/bl30_new.bin \ >> - bl30 >> - >> - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl2_acs.bin \ >> - fip/zero_tmp \ >> - fip/bl2_zero.bin \ >> - fip/bl21.bin \ >> - fip/bl21_zero.bin \ >> - fip/bl2_new.bin \ >> - bl2 >> - >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig >> - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ >> - --output fip/u-boot.bin \ >> - --bl2 fip/bl2.n.bin.sig \ >> - --bl30 fip/bl30_new.bin.enc \ >> - --bl31 fip/bl31.img.enc \ >> - --bl33 fip/bl33.bin.enc >> + >> +.. code-block:: bash >> + >> + $ mkdir fip >> + >> + $ cp $FIPDIR/gxl/bl2.bin fip/ >> + $ cp $FIPDIR/gxl/acs.bin fip/ >> + $ cp $FIPDIR/gxl/bl21.bin fip/ >> + $ cp $FIPDIR/gxl/bl30.bin fip/ >> + $ cp $FIPDIR/gxl/bl301.bin fip/ >> + $ cp $FIPDIR/gxl/bl31.img fip/ >> + $ cp u-boot.bin fip/bl33.bin >> + >> + $ $FIPDIR/blx_fix.sh \ >> + fip/bl30.bin \ >> + fip/zero_tmp \ >> + fip/bl30_zero.bin \ >> + fip/bl301.bin \ >> + fip/bl301_zero.bin \ >> + fip/bl30_new.bin \ >> + bl30 >> + >> + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> + >> + $ $FIPDIR/blx_fix.sh \ >> + fip/bl2_acs.bin \ >> + fip/zero_tmp \ >> + fip/bl2_zero.bin \ >> + fip/bl21.bin \ >> + fip/bl21_zero.bin \ >> + fip/bl2_new.bin \ >> + bl2 >> + >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ >> + --output fip/u-boot.bin \ >> + --bl2 fip/bl2.n.bin.sig \ >> + --bl30 fip/bl30_new.bin.enc \ >> + --bl31 fip/bl31.img.enc \ >> + --bl33 fip/bl33.bin.enc >> >> and then write the image to SD with: >> >> - > DEV=/dev/your_sd_device >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> +.. code-block:: bash >> + >> + $ DEV=/dev/your_sd_device >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> diff --git a/board/amlogic/q200/README.q200 b/doc/board/amlogic/q200.rst >> similarity index 24% >> rename from board/amlogic/q200/README.q200 >> rename to doc/board/amlogic/q200.rst >> index d4142c88bd..58ebe52a2a 100644 >> --- a/board/amlogic/q200/README.q200 >> +++ b/doc/board/amlogic/q200.rst >> @@ -16,86 +16,84 @@ specifications: >> - SDIO Wifi Module, Bluetooth >> - IR receiver >> >> -Currently the u-boot port supports the following devices: >> - - serial >> - - eMMC, microSD >> - - Ethernet >> - - I2C >> - - Regulators >> - - Reset controller >> - - Clock controller >> - - USB Host >> - - ADC >> - >> U-Boot compilation >> -================== >> +------------------ >> + >> +.. code-block:: bash >> >> - > export CROSS_COMPILE=aarch64-none-elf- >> - > make khadas-vim2_defconfig >> - > make >> + $ export CROSS_COMPILE=aarch64-none-elf- >> + $ make khadas-vim2_defconfig >> + $ make >> >> Image creation >> -============== >> +-------------- >> >> Amlogic doesn't provide sources for the firmware and for tools needed >> to create the bootloader image, so it is necessary to obtain them from >> the git tree published by the board vendor: >> >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot >> - > cd amlogic-u-boot >> - > make gxm_q200_v1_defconfig >> - > make >> - > export FIPDIR=$PWD/fip >> +.. code-block:: bash >> + >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot >> + $ cd amlogic-u-boot >> + $ make gxm_q200_v1_defconfig >> + $ make >> + $ export FIPDIR=$PWD/fip >> >> Go back to mainline U-Boot source tree then : >> - > mkdir fip >> - >> - > cp $FIPDIR/gxl/bl2.bin fip/ >> - > cp $FIPDIR/gxl/acs.bin fip/ >> - > cp $FIPDIR/gxl/bl21.bin fip/ >> - > cp $FIPDIR/gxl/bl30.bin fip/ >> - > cp $FIPDIR/gxl/bl301.bin fip/ >> - > cp $FIPDIR/gxl/bl31.img fip/ >> - > cp u-boot.bin fip/bl33.bin >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl30.bin \ >> - fip/zero_tmp \ >> - fip/bl30_zero.bin \ >> - fip/bl301.bin \ >> - fip/bl301_zero.bin \ >> - fip/bl30_new.bin \ >> - bl30 >> - >> - > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl2_acs.bin \ >> - fip/zero_tmp \ >> - fip/bl2_zero.bin \ >> - fip/bl21.bin \ >> - fip/bl21_zero.bin \ >> - fip/bl2_new.bin \ >> - bl2 >> - >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> - > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig >> - > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ >> - --output fip/u-boot.bin \ >> - --bl2 fip/bl2.n.bin.sig \ >> - --bl30 fip/bl30_new.bin.enc \ >> - --bl31 fip/bl31.img.enc \ >> - --bl33 fip/bl33.bin.enc >> + >> +.. code-block:: bash >> + >> + $ mkdir fip >> + >> + $ cp $FIPDIR/gxl/bl2.bin fip/ >> + $ cp $FIPDIR/gxl/acs.bin fip/ >> + $ cp $FIPDIR/gxl/bl21.bin fip/ >> + $ cp $FIPDIR/gxl/bl30.bin fip/ >> + $ cp $FIPDIR/gxl/bl301.bin fip/ >> + $ cp $FIPDIR/gxl/bl31.img fip/ >> + $ cp u-boot.bin fip/bl33.bin >> + >> + $ $FIPDIR/blx_fix.sh \ >> + fip/bl30.bin \ >> + fip/zero_tmp \ >> + fip/bl30_zero.bin \ >> + fip/bl301.bin \ >> + fip/bl301_zero.bin \ >> + fip/bl30_new.bin \ >> + bl30 >> + >> + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> + >> + $ $FIPDIR/blx_fix.sh \ >> + fip/bl2_acs.bin \ >> + fip/zero_tmp \ >> + fip/bl2_zero.bin \ >> + fip/bl21.bin \ >> + fip/bl21_zero.bin \ >> + fip/bl2_new.bin \ >> + bl2 >> + >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig >> + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ >> + --output fip/u-boot.bin \ >> + --bl2 fip/bl2.n.bin.sig \ >> + --bl30 fip/bl30_new.bin.enc \ >> + --bl31 fip/bl31.img.enc \ >> + --bl33 fip/bl33.bin.enc >> >> and then write the image to SD with: >> >> - > DEV=/dev/your_sd_device >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> - > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> +.. code-block:: bash >> + >> + $ DEV=/dev/your_sd_device >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 >> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 >> diff --git a/board/amlogic/s400/README b/doc/board/amlogic/s400.rst >> similarity index 21% >> rename from board/amlogic/s400/README >> rename to doc/board/amlogic/s400.rst >> index a48db22a42..a1d5cac633 100644 >> --- a/board/amlogic/s400/README >> +++ b/doc/board/amlogic/s400.rst >> @@ -17,93 +17,91 @@ specifications: >> >> Schematics are available from Amlogic on demand. >> >> -Currently the u-boot port supports the following devices: >> - - serial >> - - eMMC >> - - Ethernet >> - - I2C >> - - Regulators >> - - Reset controller >> - - Clock controller >> - - USB Host >> - - ADC >> +U-Boot compilation >> +------------------ >> >> -u-boot compilation >> -================== >> +.. code-block:: bash >> >> - > export CROSS_COMPILE=aarch64-none-elf- >> - > make s400_defconfig >> - > make >> + $ export CROSS_COMPILE=aarch64-none-elf- >> + $ make s400_defconfig >> + $ make >> >> Image creation >> -============== >> +-------------- >> >> Amlogic doesn't provide sources for the firmware and for tools needed >> to create the bootloader image, so it is necessary to obtain them from >> the git tree published by the board vendor: >> >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> - > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> - > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> - > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot >> - > cd amlogic-u-boot >> - > make axg_s400_v1_defconfig >> - > make >> - > export FIPDIR=$PWD/fip >> +.. code-block:: bash >> + >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot >> + $ cd amlogic-u-boot >> + $ make axg_s400_v1_defconfig >> + $ make >> + $ export FIPDIR=$PWD/fip >> >> Go back to mainline U-boot source tree then : >> - > mkdir fip >> - >> - > cp $FIPDIR/axg/bl2.bin fip/ >> - > cp $FIPDIR/axg/acs.bin fip/ >> - > cp $FIPDIR/axg/bl21.bin fip/ >> - > cp $FIPDIR/axg/bl30.bin fip/ >> - > cp $FIPDIR/axg/bl301.bin fip/ >> - > cp $FIPDIR/axg/bl31.img fip/ >> - > cp u-boot.bin fip/bl33.bin >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl30.bin \ >> - fip/zero_tmp \ >> - fip/bl30_zero.bin \ >> - fip/bl301.bin \ >> - fip/bl301_zero.bin \ >> - fip/bl30_new.bin \ >> - bl30 >> - >> - > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> - >> - > $FIPDIR/blx_fix.sh \ >> - fip/bl2_acs.bin \ >> - fip/zero_tmp \ >> - fip/bl2_zero.bin \ >> - fip/bl21.bin \ >> - fip/bl21_zero.bin \ >> - fip/bl2_new.bin \ >> - bl2 >> - >> - > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl30_new.bin \ >> - --output fip/bl30_new.bin.enc \ >> - --level v3 --type bl30 >> - > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl31.img \ >> - --output fip/bl31.img.enc \ >> - --level v3 --type bl31 >> - > $FIPDIR/axg/aml_encrypt_axg --bl3sig --input fip/bl33.bin --compress lz4 \ >> - --output fip/bl33.bin.enc \ >> - --level v3 --type bl33 >> - > $FIPDIR/axg/aml_encrypt_axg --bl2sig --input fip/bl2_new.bin \ >> - --output f ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 2/2] board: amlogic: add board doc files to MAINTAINERS 2020-06-11 13:28 [PATCH 0/2] board: amlogic: move boards doc into doc/board/amlogic Neil Armstrong 2020-06-11 13:28 ` [PATCH 1/2] " Neil Armstrong @ 2020-06-11 13:28 ` Neil Armstrong 1 sibling, 0 replies; 7+ messages in thread From: Neil Armstrong @ 2020-06-11 13:28 UTC (permalink / raw) To: u-boot Add the recently added reStructuredText board documentation in the appropriate MAINTAINERS files. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- MAINTAINERS | 1 + board/amlogic/p200/MAINTAINERS | 3 +++ board/amlogic/p201/MAINTAINERS | 1 + board/amlogic/p212/MAINTAINERS | 4 ++++ board/amlogic/q200/MAINTAINERS | 1 + board/amlogic/s400/MAINTAINERS | 1 + board/amlogic/sei510/MAINTAINERS | 1 + board/amlogic/sei610/MAINTAINERS | 1 + board/amlogic/u200/MAINTAINERS | 1 + board/amlogic/w400/MAINTAINERS | 4 ++++ 10 files changed, 18 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 1fd975c72f..fb904ba7db 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -145,6 +145,7 @@ F: drivers/power/domain/meson-gx-pwrc-vpu.c F: drivers/video/meson/ F: include/configs/meson64.h F: include/configs/meson64_android.h +F: doc/board/amlogic/ N: meson ARM BROADCOM BCM283X diff --git a/board/amlogic/p200/MAINTAINERS b/board/amlogic/p200/MAINTAINERS index c20f056af2..1df9b8b24b 100644 --- a/board/amlogic/p200/MAINTAINERS +++ b/board/amlogic/p200/MAINTAINERS @@ -7,3 +7,6 @@ F: board/amlogic/p200/ F: configs/nanopi-k2_defconfig F: configs/odroid-c2_defconfig F: configs/p200_defconfig +F: doc/board/amlogic/p200.rst +F: doc/board/amlogic/nanopi-k2.rst +F: doc/board/amlogic/odroid-c2.rst diff --git a/board/amlogic/p201/MAINTAINERS b/board/amlogic/p201/MAINTAINERS index f84984d7ab..1501b6280d 100644 --- a/board/amlogic/p201/MAINTAINERS +++ b/board/amlogic/p201/MAINTAINERS @@ -4,3 +4,4 @@ S: Maintained L: u-boot-amlogic at groups.io F: board/amlogic/p201/ F: configs/p201_defconfig +F: doc/board/amlogic/p201.rst diff --git a/board/amlogic/p212/MAINTAINERS b/board/amlogic/p212/MAINTAINERS index 8848df05b7..cae6994393 100644 --- a/board/amlogic/p212/MAINTAINERS +++ b/board/amlogic/p212/MAINTAINERS @@ -8,3 +8,7 @@ F: configs/khadas-vim_defconfig F: configs/libretech-ac_defconfig F: configs/libretech-cc_defconfig F: configs/p212_defconfig +F: doc/board/amlogic/p212.rst +F: doc/board/amlogic/libretech-ac.rst +F: doc/board/amlogic/libretech-cc.rst +F: doc/board/amlogic/khadas-vim.rst diff --git a/board/amlogic/q200/MAINTAINERS b/board/amlogic/q200/MAINTAINERS index 6f00f87386..ec05aa6f4c 100644 --- a/board/amlogic/q200/MAINTAINERS +++ b/board/amlogic/q200/MAINTAINERS @@ -7,3 +7,4 @@ F: include/configs/q200.h F: configs/khadas-vim2_defconfig F: configs/libretech-s905d-pc_defconfig F: configs/libretech-s912-pc_defconfig +F: doc/board/amlogic/khadas-vim2.rst diff --git a/board/amlogic/s400/MAINTAINERS b/board/amlogic/s400/MAINTAINERS index da90cf9b6f..fb46b1bbbf 100644 --- a/board/amlogic/s400/MAINTAINERS +++ b/board/amlogic/s400/MAINTAINERS @@ -5,3 +5,4 @@ L: u-boot-amlogic at groups.io F: board/amlogic/s400/ F: include/configs/s400.h F: configs/s400_defconfig +F: doc/board/amlogic/s400.rst diff --git a/board/amlogic/sei510/MAINTAINERS b/board/amlogic/sei510/MAINTAINERS index 8dc655e8cc..c01c1d60df 100644 --- a/board/amlogic/sei510/MAINTAINERS +++ b/board/amlogic/sei510/MAINTAINERS @@ -5,3 +5,4 @@ L: u-boot-amlogic at groups.io F: board/amlogic/sei510/ F: configs/sei510_defconfig F: include/configs/sei510.h +F: doc/board/amlogic/sei510.rst diff --git a/board/amlogic/sei610/MAINTAINERS b/board/amlogic/sei610/MAINTAINERS index da77aafa41..092178b2c8 100644 --- a/board/amlogic/sei610/MAINTAINERS +++ b/board/amlogic/sei610/MAINTAINERS @@ -5,3 +5,4 @@ L: u-boot-amlogic at groups.io F: board/amlogic/sei610/ F: configs/sei610_defconfig F: include/configs/sei610.h +F: doc/board/amlogic/sei610.rst diff --git a/board/amlogic/u200/MAINTAINERS b/board/amlogic/u200/MAINTAINERS index 5ae7f5e66a..8c23f9a7d3 100644 --- a/board/amlogic/u200/MAINTAINERS +++ b/board/amlogic/u200/MAINTAINERS @@ -4,3 +4,4 @@ S: Maintained L: u-boot-amlogic at groups.io F: board/amlogic/u200/ F: configs/u200_defconfig +F: doc/board/amlogic/u200.rst diff --git a/board/amlogic/w400/MAINTAINERS b/board/amlogic/w400/MAINTAINERS index 2ff90039ca..5e837cfaef 100644 --- a/board/amlogic/w400/MAINTAINERS +++ b/board/amlogic/w400/MAINTAINERS @@ -6,3 +6,7 @@ F: board/amlogic/w400/ F: configs/khadas-vim3_defconfig F: configs/khadas-vim3l_defconfig F: configs/odroid-n2_defconfig +F: doc/board/amlogic/w400.rst +F: doc/board/amlogic/khadas-vim3.rst +F: doc/board/amlogic/khadas-vim3l.rst +F: doc/board/amlogic/odroid-n2.rst -- 2.22.0 ^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-06-16 7:40 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2020-06-11 13:28 [PATCH 0/2] board: amlogic: move boards doc into doc/board/amlogic Neil Armstrong 2020-06-11 13:28 ` [PATCH 1/2] " Neil Armstrong 2020-06-12 10:55 ` Heinrich Schuchardt 2020-06-15 13:20 ` Neil Armstrong 2020-06-16 4:35 ` Anand Moon 2020-06-16 7:40 ` Neil Armstrong 2020-06-11 13:28 ` [PATCH 2/2] board: amlogic: add board doc files to MAINTAINERS Neil Armstrong
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox