From: Sean Anderson <seanga2@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH v4 00/12] riscv: Add FPIOA and GPIO support for Kendryte K210
Date: Wed, 24 Jun 2020 06:29:35 -0400 [thread overview]
Message-ID: <20200624102947.359794-1-seanga2@gmail.com> (raw)
This patch series adds support for pinmuxing, gpios, and leds on the Kendyte
K210.
This patch series was previously part of
https://patchwork.ozlabs.org/project/uboot/list/?series=161576
This patch series depends on
https://patchwork.ozlabs.org/project/uboot/list/?series=178480
Changes in v4:
- Add sandbox dt-binding headers to MAINTAINERS
- Add test for led behavior
- Add test/dm/pinmux.c to patch
- Move sandbox_* variables into a priv structure. This resets them to the
default state every time we re-probe.
- Reformat documentation in dm/pinctrl.h
Changes in v3:
- Add dt-bindings/pinctrl/sandbox-pinmux.h to patch
Changes in v2:
- Add test for pinmuxing
- Don't clear existing pinctrl settings on probe
- Re-order GPIOs to match the defaults more closely
- Rebase onto v13 of "riscv: Add Sipeed Maix support"
- Rewrite FPIOA driver to use pinmux property
- Support muxing the output enable signal for each function in the FPIOA
- Support output and input inversion in the pinmux driver
- Support pinmux property in pinctrl-generic
Sean Anderson (12):
pinctrl: Add pinmux property support to pinctrl-generic
pinctrl: Reformat documentation in dm/pinctrl.h
test: pinmux: Add test for pin muxing
pinctrl: Add support for Kendryte K210 FPIOA
gpio: sifive: Use generic reg read function
gpio: dw: Fix warnings about casting int to pointer
gpio: dw: Add a trailing underscore to generated name
gpio: dw: Return output value when direction is out
led: gpio: Default to using node name if label is absent
test: dm: Test for default led naming
riscv: Add pinmux and gpio bindings for Kendryte K210
riscv: Add FPIOA and GPIO support for Kendryte K210
MAINTAINERS | 3 +
arch/riscv/dts/k210-maix-bit.dts | 104 +++
arch/riscv/dts/k210.dtsi | 12 +
arch/sandbox/dts/test.dts | 47 +-
board/sipeed/maix/Kconfig | 9 +
doc/board/sipeed/maix.rst | 64 +-
.../pinctrl/kendryte,k210-fpioa.txt | 102 +++
.../pinctrl/pinctrl-bindings.txt | 65 +-
drivers/gpio/dwapb_gpio.c | 33 +-
drivers/gpio/sifive-gpio.c | 2 +-
drivers/led/led_gpio.c | 7 +-
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/kendryte/Kconfig | 7 +
drivers/pinctrl/kendryte/Makefile | 1 +
drivers/pinctrl/kendryte/pinctrl.c | 678 ++++++++++++++++++
drivers/pinctrl/kendryte/pinctrl.h | 70 ++
drivers/pinctrl/pinctrl-generic.c | 125 +++-
drivers/pinctrl/pinctrl-sandbox.c | 186 +++--
include/dm/pinctrl.h | 360 +++++++---
include/dt-bindings/pinctrl/k210-pinctrl.h | 277 +++++++
include/dt-bindings/pinctrl/sandbox-pinmux.h | 19 +
test/dm/Makefile | 3 +
test/dm/led.c | 3 +-
test/dm/pinmux.c | 57 ++
test/py/tests/test_pinmux.py | 36 +-
26 files changed, 2027 insertions(+), 245 deletions(-)
create mode 100644 doc/device-tree-bindings/pinctrl/kendryte,k210-fpioa.txt
create mode 100644 drivers/pinctrl/kendryte/Kconfig
create mode 100644 drivers/pinctrl/kendryte/Makefile
create mode 100644 drivers/pinctrl/kendryte/pinctrl.c
create mode 100644 drivers/pinctrl/kendryte/pinctrl.h
create mode 100644 include/dt-bindings/pinctrl/k210-pinctrl.h
create mode 100644 include/dt-bindings/pinctrl/sandbox-pinmux.h
create mode 100644 test/dm/pinmux.c
--
2.26.2
next reply other threads:[~2020-06-24 10:29 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-24 10:29 Sean Anderson [this message]
2020-06-24 10:29 ` [PATCH v4 01/12] pinctrl: Add pinmux property support to pinctrl-generic Sean Anderson
2020-06-24 10:29 ` [PATCH v4 02/12] pinctrl: Reformat documentation in dm/pinctrl.h Sean Anderson
2020-07-03 0:46 ` Simon Glass
2020-06-24 10:29 ` [PATCH v4 03/12] test: pinmux: Add test for pin muxing Sean Anderson
2020-07-03 0:46 ` Simon Glass
2020-06-24 10:29 ` [PATCH v4 04/12] pinctrl: Add support for Kendryte K210 FPIOA Sean Anderson
2020-07-03 0:46 ` Simon Glass
2020-06-24 10:29 ` [PATCH v4 05/12] gpio: sifive: Use generic reg read function Sean Anderson
2020-07-03 0:46 ` Simon Glass
2020-06-24 10:29 ` [PATCH v4 06/12] gpio: dw: Fix warnings about casting int to pointer Sean Anderson
2020-06-24 10:29 ` [PATCH v4 07/12] gpio: dw: Add a trailing underscore to generated name Sean Anderson
2020-07-03 0:46 ` Simon Glass
2020-06-24 10:29 ` [PATCH v4 08/12] gpio: dw: Return output value when direction is out Sean Anderson
2020-06-24 10:29 ` [PATCH v4 09/12] led: gpio: Default to using node name if label is absent Sean Anderson
2020-06-24 10:29 ` [PATCH v4 10/12] test: dm: Test for default led naming Sean Anderson
2020-07-03 0:46 ` Simon Glass
2020-06-24 10:29 ` [PATCH v4 11/12] riscv: Add pinmux and gpio bindings for Kendryte K210 Sean Anderson
2020-07-03 0:46 ` Simon Glass
2020-06-24 10:29 ` [PATCH v4 12/12] riscv: Add FPIOA and GPIO support " Sean Anderson
2020-08-12 14:03 ` [PATCH v4 00/12] " Sean Anderson
2020-08-14 0:37 ` Rick Chen
2020-08-14 1:52 ` Sean Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200624102947.359794-1-seanga2@gmail.com \
--to=seanga2@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox