From: Andre Heider <a.heider@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream
Date: Mon, 31 Aug 2020 05:34:07 +0200 [thread overview]
Message-ID: <20200831033408.467699-1-a.heider@gmail.com> (raw)
This adds the disabled eMMC node.
Signed-off-by: Andre Heider <a.heider@gmail.com>
---
arch/arm/dts/armada-3720-espressobin.dts | 63 +++++++++---------------
1 file changed, 23 insertions(+), 40 deletions(-)
diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
index 4534f5ff29..a66ab814eb 100644
--- a/arch/arm/dts/armada-3720-espressobin.dts
+++ b/arch/arm/dts/armada-3720-espressobin.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Device Tree file for Marvell Armada 3720 community board
* (ESPRESSOBin)
@@ -5,53 +6,15 @@
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
* Konstantin Porotchkin <kostap@marvell.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
-
/dts-v1/;
#include "armada-372x.dtsi"
/ {
model = "Marvell Armada 3720 Community Board ESPRESSOBin";
- compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710";
+ compatible = "marvell,armada-3720-espressobin",
+ "marvell,armada3720", "marvell,armada3710";
chosen {
stdout-path = "serial0:115200n8";
@@ -121,6 +84,7 @@
status = "okay";
};
+/* J1 */
&sdhci0 {
pinctrl-names = "default";
pinctrl-0 = <&sdio_pins>;
@@ -130,6 +94,25 @@
status = "okay";
};
+/* U11 */
+&sdhci1 {
+ non-removable;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ marvell,pad-type = "fixed-1-8v";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc_pins>;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mmccard: mmccard at 0 {
+ compatible = "mmc-card";
+ reg = <0>;
+ };
+};
+
&spi0 {
status = "okay";
pinctrl-names = "default";
--
2.28.0
next reply other threads:[~2020-08-31 3:34 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-31 3:34 Andre Heider [this message]
2020-08-31 3:34 ` [PATCH 2/2] arm64: dts: armada-3720-espressobin-emmc: add emmc dts Andre Heider
2020-08-31 6:33 ` [PATCH v2 2/2] arm64: mvebu: a37xx: Add support for EspressoBIN with eMMC Andre Heider
2020-08-31 7:55 ` Pali Rohár
2020-08-31 8:21 ` Andre Heider
2020-08-31 8:27 ` Pali Rohár
2020-08-31 8:41 ` Andre Heider
2020-09-01 7:03 ` [PATCH v3 " Andre Heider
2020-09-01 20:02 ` Pali Rohár
2020-09-04 9:02 ` Stefan Roese
2020-08-31 7:53 ` [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream Pali Rohár
2020-08-31 8:17 ` Andre Heider
2020-09-04 12:02 ` Stefan Roese
2020-09-04 12:35 ` Andre Heider
2020-09-04 12:40 ` Stefan Roese
2020-09-04 15:36 ` Andre Heider
2020-09-06 9:21 ` Pali Rohár
2020-09-06 16:03 ` Peter Robinson
2020-09-06 16:11 ` Pali Rohár
2020-08-31 8:01 ` Pali Rohár
2020-08-31 8:17 ` Andre Heider
2020-08-31 8:46 ` Pali Rohár
2020-08-31 9:59 ` Andre Heider
2020-09-01 20:00 ` Pali Rohár
2020-09-04 9:01 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200831033408.467699-1-a.heider@gmail.com \
--to=a.heider@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox