[PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream

["Pali Rohár" <pali@kernel.org>]

On Monday 31 August 2020 10:17:07 Andre Heider wrote:
> On 31/08/2020 10:01, Pali Roh?r wrote:
> > On Monday 31 August 2020 05:34:07 Andre Heider wrote:
> > > +/* U11 */
> > > +&sdhci1 {
> > > +	non-removable;
> > > +	bus-width = <8>;
> > > +	mmc-ddr-1_8v;
> > > +	mmc-hs400-1_8v;
> > > +	marvell,pad-type = "fixed-1-8v";
> > > +	pinctrl-names = "default";
> > > +	pinctrl-0 = <&mmc_pins>;
> > > +	status = "disabled";
> > > +
> > > +	#address-cells = <1>;
> > > +	#size-cells = <0>;
> > > +	mmccard: mmccard at 0 {
> > > +		compatible = "mmc-card";
> > > +		reg = <0>;
> > > +	};
> > > +};
> > 
> > Anyway, Andre, have you tested these Marvell's patches on top of U-Boot
> > from master git branch? Because espressobin with eMMC is rather rare (do
> > not know who has this board for testing; do you really have it?) and
> > from my experience with previous patches I know that Marvell's patches
> > does not always work on current upstream U-Boot.
> 
> I haven't tested it on a espressobin emmc myself, but the node is the same
> as for arch/arm/dts/armada-3720-db.dts and almost the same as for
> arch/arm/dts/armada-3720-uDPU.dts.

I think changes should be tested prior merged them into upstream.
Untested patches can cause other hidden issues.

Also as I wrote, other SD patches for EspressoBin copied+pasted from
Marvell's did not worked as is applied on current upstream U-Boot. And
also argument that "patch is similar as other node" is not reason to not
test changed. As a first thing which I did for SD card support on
EspressoBin was that I copied DTS node from Turris MOX... and on
EspressoBin it did not worked. On MOX was card working fine.