[PATCH v3 2/2] armv8: lx2162aqds: Add support for LX2162AQDS platform

[Tom Rini <trini@konsulko.com>]

On Mon, Sep 07, 2020 at 03:42:07PM +0530, meenakshi.aggarwal at nxp.com wrote:

> From: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
> 
> This patch add base support for LX2162AQDS board.
> LX2162AQDS board supports LX2162A family SoCs.
> This patch add basic support of platform.
> 
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
> Signed-off-by: hui.song <hui.song_1@nxp.com>
> Signed-off-by: Manish Tomar <manish.tomar@nxp.com>
> Signed-off-by: Vikas Singh <vikas.singh@nxp.com>
> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
> ---
>  arch/arm/Kconfig                               |  12 +
>  arch/arm/dts/Makefile                          |   6 +-
>  arch/arm/dts/fsl-lx2160a-qds.dts               |   3 -
>  arch/arm/dts/fsl-lx2160a-qds.dtsi              |  22 +-
>  arch/arm/dts/fsl-lx2162a-qds-17-x.dts          |  17 +
>  arch/arm/dts/fsl-lx2162a-qds-18-x.dts          |  17 +
>  arch/arm/dts/fsl-lx2162a-qds-20-x.dts          |  17 +
>  arch/arm/dts/fsl-lx2162a-qds-sd1-17.dtsi       |  58 ++
>  arch/arm/dts/fsl-lx2162a-qds-sd1-18.dtsi       |  61 ++
>  arch/arm/dts/fsl-lx2162a-qds-sd1-20.dtsi       |  26 +
>  arch/arm/dts/fsl-lx2162a-qds.dts               |  34 +

Most of these new dts* files are not added to MAINTAINERS entries and it
would be good to do so.

>  board/freescale/common/vid.c                   |   3 +-
>  board/freescale/lx2160a/Kconfig                |  16 +
>  board/freescale/lx2160a/MAINTAINERS            |  10 +
>  board/freescale/lx2160a/Makefile               |   1 +
>  board/freescale/lx2160a/README                 | 132 ++++

This README also should get updated to rST and moved.

[snip]
> +/*
> + * Need to override existing (lx2160a) with lx2162aqds so set_board_info will
> + * use proper prefix when creating full board_name (SYS_BOARD + type)
> + */
> +#undef CONFIG_SYS_BOARD
> +#define CONFIG_SYS_BOARD                "lx2162aqds"

SYS_BOARD is under Kconfig, please just fix it there.

> +
> +#undef CONFIG_SYS_NXP_SRDS_3
> +
> +/* Qixis */
> +#define QIXIS_XMAP_MASK			0x07

This is the start of adding tons of non-CONFIG information to the config
header.  Don't do this, it's going to make full migration to Kconfig
harder.  Please audit the whole file and anything that's not CONFIG_xxx
needs to be somewhere else really.  Thanks.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200907/9429ba35/attachment.sig>