From: Paul Barker <paul.barker@sancloud.com>
To: Tom Rini <trini@konsulko.com>,
Peter Robinson <pbrobinson@gmail.com>,
Lokesh Vutla <lokeshvutla@ti.com>
Cc: Paul Barker <paul.barker@sancloud.com>, u-boot@lists.denx.de
Subject: [PATCH v2 1/5] dt-bindings: Resync omap & am33xx pinctrl bindings
Date: Mon, 12 Jul 2021 21:14:08 +0100 [thread overview]
Message-ID: <20210712201412.13306-2-paul.barker@sancloud.com> (raw)
In-Reply-To: <20210712201412.13306-1-paul.barker@sancloud.com>
These headers are updated to match the versions in Linux 5.13.1.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
---
include/dt-bindings/pinctrl/am33xx.h | 131 ++++++++++++++++++++++++++-
include/dt-bindings/pinctrl/omap.h | 11 +--
2 files changed, 135 insertions(+), 7 deletions(-)
diff --git a/include/dt-bindings/pinctrl/am33xx.h b/include/dt-bindings/pinctrl/am33xx.h
index 226f77246a..17877e8598 100644
--- a/include/dt-bindings/pinctrl/am33xx.h
+++ b/include/dt-bindings/pinctrl/am33xx.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
/*
* This header provides constants specific to AM33XX pinctrl bindings.
*/
@@ -39,5 +40,133 @@
#undef PIN_OFF_INPUT_PULLDOWN
#undef PIN_OFF_WAKEUPENABLE
-#endif
+#define AM335X_PIN_OFFSET_MIN 0x0800U
+
+#define AM335X_PIN_GPMC_AD0 0x800
+#define AM335X_PIN_GPMC_AD1 0x804
+#define AM335X_PIN_GPMC_AD2 0x808
+#define AM335X_PIN_GPMC_AD3 0x80c
+#define AM335X_PIN_GPMC_AD4 0x810
+#define AM335X_PIN_GPMC_AD5 0x814
+#define AM335X_PIN_GPMC_AD6 0x818
+#define AM335X_PIN_GPMC_AD7 0x81c
+#define AM335X_PIN_GPMC_AD8 0x820
+#define AM335X_PIN_GPMC_AD9 0x824
+#define AM335X_PIN_GPMC_AD10 0x828
+#define AM335X_PIN_GPMC_AD11 0x82c
+#define AM335X_PIN_GPMC_AD12 0x830
+#define AM335X_PIN_GPMC_AD13 0x834
+#define AM335X_PIN_GPMC_AD14 0x838
+#define AM335X_PIN_GPMC_AD15 0x83c
+#define AM335X_PIN_GPMC_A0 0x840
+#define AM335X_PIN_GPMC_A1 0x844
+#define AM335X_PIN_GPMC_A2 0x848
+#define AM335X_PIN_GPMC_A3 0x84c
+#define AM335X_PIN_GPMC_A4 0x850
+#define AM335X_PIN_GPMC_A5 0x854
+#define AM335X_PIN_GPMC_A6 0x858
+#define AM335X_PIN_GPMC_A7 0x85c
+#define AM335X_PIN_GPMC_A8 0x860
+#define AM335X_PIN_GPMC_A9 0x864
+#define AM335X_PIN_GPMC_A10 0x868
+#define AM335X_PIN_GPMC_A11 0x86c
+#define AM335X_PIN_GPMC_WAIT0 0x870
+#define AM335X_PIN_GPMC_WPN 0x874
+#define AM335X_PIN_GPMC_BEN1 0x878
+#define AM335X_PIN_GPMC_CSN0 0x87c
+#define AM335X_PIN_GPMC_CSN1 0x880
+#define AM335X_PIN_GPMC_CSN2 0x884
+#define AM335X_PIN_GPMC_CSN3 0x888
+#define AM335X_PIN_GPMC_CLK 0x88c
+#define AM335X_PIN_GPMC_ADVN_ALE 0x890
+#define AM335X_PIN_GPMC_OEN_REN 0x894
+#define AM335X_PIN_GPMC_WEN 0x898
+#define AM335X_PIN_GPMC_BEN0_CLE 0x89c
+#define AM335X_PIN_LCD_DATA0 0x8a0
+#define AM335X_PIN_LCD_DATA1 0x8a4
+#define AM335X_PIN_LCD_DATA2 0x8a8
+#define AM335X_PIN_LCD_DATA3 0x8ac
+#define AM335X_PIN_LCD_DATA4 0x8b0
+#define AM335X_PIN_LCD_DATA5 0x8b4
+#define AM335X_PIN_LCD_DATA6 0x8b8
+#define AM335X_PIN_LCD_DATA7 0x8bc
+#define AM335X_PIN_LCD_DATA8 0x8c0
+#define AM335X_PIN_LCD_DATA9 0x8c4
+#define AM335X_PIN_LCD_DATA10 0x8c8
+#define AM335X_PIN_LCD_DATA11 0x8cc
+#define AM335X_PIN_LCD_DATA12 0x8d0
+#define AM335X_PIN_LCD_DATA13 0x8d4
+#define AM335X_PIN_LCD_DATA14 0x8d8
+#define AM335X_PIN_LCD_DATA15 0x8dc
+#define AM335X_PIN_LCD_VSYNC 0x8e0
+#define AM335X_PIN_LCD_HSYNC 0x8e4
+#define AM335X_PIN_LCD_PCLK 0x8e8
+#define AM335X_PIN_LCD_AC_BIAS_EN 0x8ec
+#define AM335X_PIN_MMC0_DAT3 0x8f0
+#define AM335X_PIN_MMC0_DAT2 0x8f4
+#define AM335X_PIN_MMC0_DAT1 0x8f8
+#define AM335X_PIN_MMC0_DAT0 0x8fc
+#define AM335X_PIN_MMC0_CLK 0x900
+#define AM335X_PIN_MMC0_CMD 0x904
+#define AM335X_PIN_MII1_COL 0x908
+#define AM335X_PIN_MII1_CRS 0x90c
+#define AM335X_PIN_MII1_RX_ER 0x910
+#define AM335X_PIN_MII1_TX_EN 0x914
+#define AM335X_PIN_MII1_RX_DV 0x918
+#define AM335X_PIN_MII1_TXD3 0x91c
+#define AM335X_PIN_MII1_TXD2 0x920
+#define AM335X_PIN_MII1_TXD1 0x924
+#define AM335X_PIN_MII1_TXD0 0x928
+#define AM335X_PIN_MII1_TX_CLK 0x92c
+#define AM335X_PIN_MII1_RX_CLK 0x930
+#define AM335X_PIN_MII1_RXD3 0x934
+#define AM335X_PIN_MII1_RXD2 0x938
+#define AM335X_PIN_MII1_RXD1 0x93c
+#define AM335X_PIN_MII1_RXD0 0x940
+#define AM335X_PIN_RMII1_REF_CLK 0x944
+#define AM335X_PIN_MDIO 0x948
+#define AM335X_PIN_MDC 0x94c
+#define AM335X_PIN_SPI0_SCLK 0x950
+#define AM335X_PIN_SPI0_D0 0x954
+#define AM335X_PIN_SPI0_D1 0x958
+#define AM335X_PIN_SPI0_CS0 0x95c
+#define AM335X_PIN_SPI0_CS1 0x960
+#define AM335X_PIN_ECAP0_IN_PWM0_OUT 0x964
+#define AM335X_PIN_UART0_CTSN 0x968
+#define AM335X_PIN_UART0_RTSN 0x96c
+#define AM335X_PIN_UART0_RXD 0x970
+#define AM335X_PIN_UART0_TXD 0x974
+#define AM335X_PIN_UART1_CTSN 0x978
+#define AM335X_PIN_UART1_RTSN 0x97c
+#define AM335X_PIN_UART1_RXD 0x980
+#define AM335X_PIN_UART1_TXD 0x984
+#define AM335X_PIN_I2C0_SDA 0x988
+#define AM335X_PIN_I2C0_SCL 0x98c
+#define AM335X_PIN_MCASP0_ACLKX 0x990
+#define AM335X_PIN_MCASP0_FSX 0x994
+#define AM335X_PIN_MCASP0_AXR0 0x998
+#define AM335X_PIN_MCASP0_AHCLKR 0x99c
+#define AM335X_PIN_MCASP0_ACLKR 0x9a0
+#define AM335X_PIN_MCASP0_FSR 0x9a4
+#define AM335X_PIN_MCASP0_AXR1 0x9a8
+#define AM335X_PIN_MCASP0_AHCLKX 0x9ac
+#define AM335X_PIN_XDMA_EVENT_INTR0 0x9b0
+#define AM335X_PIN_XDMA_EVENT_INTR1 0x9b4
+#define AM335X_PIN_WARMRSTN 0x9b8
+#define AM335X_PIN_NNMI 0x9c0
+#define AM335X_PIN_TMS 0x9d0
+#define AM335X_PIN_TDI 0x9d4
+#define AM335X_PIN_TDO 0x9d8
+#define AM335X_PIN_TCK 0x9dc
+#define AM335X_PIN_TRSTN 0x9e0
+#define AM335X_PIN_EMU0 0x9e4
+#define AM335X_PIN_EMU1 0x9e8
+#define AM335X_PIN_RTC_PWRONRSTN 0x9f8
+#define AM335X_PIN_PMIC_POWER_EN 0x9fc
+#define AM335X_PIN_EXT_WAKEUP 0xa00
+#define AM335X_PIN_USB0_DRVVBUS 0xa1c
+#define AM335X_PIN_USB1_DRVVBUS 0xa34
+#define AM335X_PIN_OFFSET_MAX 0x0a34U
+
+#endif
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
index 58fe28f159..f48245ff87 100644
--- a/include/dt-bindings/pinctrl/omap.h
+++ b/include/dt-bindings/pinctrl/omap.h
@@ -24,7 +24,7 @@
#define PULL_UP (1 << 4)
#define ALTELECTRICALSEL (1 << 5)
-/* 34xx specific mux bit defines */
+/* omap3/4/5 specific mux bit defines */
#define INPUT_EN (1 << 8)
#define OFF_EN (1 << 9)
#define OFFOUT_EN (1 << 10)
@@ -32,8 +32,6 @@
#define OFF_PULL_EN (1 << 12)
#define OFF_PULL_UP (1 << 13)
#define WAKEUP_EN (1 << 14)
-
-/* 44xx specific mux bit defines */
#define WAKEUP_EVENT (1 << 15)
/* Active pin states */
@@ -48,8 +46,8 @@
#define PIN_OFF_NONE 0
#define PIN_OFF_OUTPUT_HIGH (OFF_EN | OFFOUT_EN | OFFOUT_VAL)
#define PIN_OFF_OUTPUT_LOW (OFF_EN | OFFOUT_EN)
-#define PIN_OFF_INPUT_PULLUP (OFF_EN | OFF_PULL_EN | OFF_PULL_UP)
-#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFF_PULL_EN)
+#define PIN_OFF_INPUT_PULLUP (OFF_EN | OFFOUT_EN | OFF_PULL_EN | OFF_PULL_UP)
+#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFFOUT_EN | OFF_PULL_EN)
#define PIN_OFF_WAKEUPENABLE WAKEUP_EN
/*
@@ -66,7 +64,8 @@
#define OMAP3_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2a00) (val)
#define DM814X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
#define DM816X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
-#define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
+#define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) (0)
+#define AM33XX_PADCONF(pa, conf, mux) OMAP_IOPAD_OFFSET((pa), 0x0800) (conf) (mux)
/*
* Macros to allow using the offset from the padconf physical address
--
2.26.2
next prev parent reply other threads:[~2021-07-12 20:14 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-12 20:14 [PATCH v2 0/5] Resync BeagleBone dtbs, add SanCloud BBE support & minor fixups Paul Barker
2021-07-12 20:14 ` Paul Barker [this message]
2021-07-12 20:14 ` [PATCH v2 2/5] arm: dts: Resync BeagleBone device trees Paul Barker
2021-07-12 20:14 ` [PATCH v2 3/5] arm: dts: Import am335x-sancloud-bbe devicetree Paul Barker
2021-07-12 20:14 ` [PATCH v2 4/5] configs: am335x_evm: Support GbE PHYs Paul Barker
2021-07-12 20:14 ` [PATCH v2 5/5] configs: am335x_evm: Fix BeagleBone Green DTB selection Paul Barker
2021-07-13 6:29 ` Lokesh Vutla
2021-07-20 8:19 ` Paul Barker
2021-07-21 5:59 ` Lokesh Vutla
2021-07-21 6:40 ` Paul Barker
2021-07-26 7:11 ` Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210712201412.13306-2-paul.barker@sancloud.com \
--to=paul.barker@sancloud.com \
--cc=lokeshvutla@ti.com \
--cc=pbrobinson@gmail.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox