public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: JaimeLiao <jaimeliao.tw@gmail.com>
To: u-boot@lists.denx.de, jagan@amarulasolutions.com,
	vigneshr@ti.com, p.yadav@ti.com
Cc: zhengxunli@mxic.com.tw, ycllin@mxic.com.tw,
	jaimeliao@mxic.com.tw, JaimeLiao <jaimeliao.tw@gmail.com>
Subject: [PATCH 4/4] mtd: spi-nor-core: Add support for Macronix Octal flash
Date: Fri, 13 Aug 2021 15:25:52 +0800	[thread overview]
Message-ID: <20210813072552.21772-5-jaimeliao.tw@gmail.com> (raw)
In-Reply-To: <20210813072552.21772-1-jaimeliao.tw@gmail.com>

Adding Macronix Octal flash for Octal DTR support.

The octaflash series can be divided into the following types:

MX25 series : Serial NOR Flash.
MX66 series : Serial NOR Flash with stacked die.(Size larger than 1Gb)
LM/UM series : Up to 250MHz clock frequency with both DTR/STR operation.
LW/UW series : Support simultaneous Read-while-Write operation in multiple
	       bank architecture. Read-while-write feature which means read
	       data one bank while another bank is programing or erasing.

MX25LM : 3.0V Octal I/O
 -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7841/MX25LM51245G,%203V,%20512Mb,%20v1.1.pdf

MX25UM : 1.8V Octal I/O
 -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7525/MX25UM51245G%20Extreme%20Speed,%201.8V,%20512Mb,%20v1.0.pdf

MX66LM : 3.0V Octal I/O with stacked die
 -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7929/MX66LM1G45G,%203V,%201Gb,%20v1.1.pdf

MX66UM : 1.8V Octal I/O with stacked die
 -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7721/MX66UM1G45G,%201.8V,%201Gb,%20v1.1.pdf

MX25LW : 3.0V Octal I/O with Read-while-Write
MX25UW : 1.8V Octal I/O with Read-while-Write
MX66LW : 3.0V Octal I/O with Read-while-Write and stack die
MX66UW : 1.8V Octal I/O with Read-while-Write and stack die

About LW/UW series, please contact us freely if you have any
questions. For adding Octal NOR Flash IDs, we have validated
each Flash on plateform zynq-picozed.

Signed-off-by: JaimeLiao <jaimeliao.tw@gmail.com>
---
 drivers/mtd/spi/spi-nor-ids.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index cb3a08872d..5c13ea3a78 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -169,7 +169,27 @@ const struct flash_info spi_nor_ids[] = {
 	{ INFO("mx66l1g45g",  0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ INFO("mx25l1633e", 0xc22415, 0, 64 * 1024,   32, SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES | SECT_4K) },
 	{ INFO("mx25r6435f", 0xc22817, 0, 64 * 1024,   128,  SECT_4K) },
-	{ INFO("mx66uw2g345g", 0xc2943c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx66uw2g345gx0", 0xc2943c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx66lm1g45g",    0xc2853b, 0, 32 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx25lm51245g",   0xc2853a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx25lw51245g",   0xc2863a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx25lm25645g",   0xc28539, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx66um2g45g",    0xc2803c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx66uw2g345g",   0xc2843c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx66um1g45g",    0xc2803b, 0, 32 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx66uw1g45g",    0xc2813b, 0, 32 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx25um51245g",   0xc2803a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx25uw51245g",   0xc2813a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx25uw51345g",   0xc2843a, 0, 16 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx25um25645g",   0xc28039, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx25uw25645g",   0xc28139, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx25um25345g",   0xc28339, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx25uw25345g",   0xc28439, 0, 8 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx25uw12845g",   0xc28138, 0, 4 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx25uw12a45g",   0xc28938, 0, 4 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx25uw12345g",   0xc28438, 0, 4 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx25uw6445g",    0xc28137, 0, 2 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
+	{ INFO("mx25uw6345g",    0xc28437, 0, 2 * 1024, 4096, SECT_4K | SPI_NOR_OCTAL_DTR_READ | SPI_NOR_4B_OPCODES) },
 #endif
 
 #ifdef CONFIG_SPI_FLASH_STMICRO		/* STMICRO */
-- 
2.17.1


      parent reply	other threads:[~2021-08-13 12:20 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-13  7:25 [PATCH 0/4] Add octal DTR support for Macronix flash JaimeLiao
2021-08-13  7:25 ` [PATCH 1/4] mtd: spi-nor: macronix: add support for Macronix octaflash JaimeLiao
2021-08-13 18:06   ` Pratyush Yadav
2021-08-23  1:12     ` liao jaime
2021-08-13  7:25 ` [PATCH 2/4] mtd: spi-nor-core: Adding different type of command extension in Soft Reset JaimeLiao
2021-08-13  7:25 ` [PATCH 3/4] mtd: spi-nor-core: set 4byte opcode when possible JaimeLiao
2021-08-13  7:25 ` JaimeLiao [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210813072552.21772-5-jaimeliao.tw@gmail.com \
    --to=jaimeliao.tw@gmail.com \
    --cc=jagan@amarulasolutions.com \
    --cc=jaimeliao@mxic.com.tw \
    --cc=p.yadav@ti.com \
    --cc=u-boot@lists.denx.de \
    --cc=vigneshr@ti.com \
    --cc=ycllin@mxic.com.tw \
    --cc=zhengxunli@mxic.com.tw \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox