[PATCH 1/5] common: Remove unused CONFIG_FIT_SHAxxx selectors

[Alexandru Gagniuc <mr.nuke.me@gmail.com>]

Originally CONFIG_FIT_SHAxxx enabled specific SHA algos for and only
for has_calculate() in common/image-fit.c. However, since commit
14f061dcb1 ("image: Drop IMAGE_ENABLE_SHAxxx"),
the correct selector was changed to CONFIG_SHAxxx.

The extra "_FIT_" variants are neither used, nor needed. Remove them.
One defconfig disables FIT_SHA256, which is now changed to 'SHA256'.

Note that SHA selection in SPL is broken for this exact reason. There
is no corresponding SPL_SHAxxx. Fixing this is is beyond the scope of
this change.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
---
 common/Kconfig.boot              | 28 ---------------------
 common/spl/Kconfig               | 42 --------------------------------
 configs/mt8516_pumpkin_defconfig |  2 +-
 include/image.h                  |  3 ---
 4 files changed, 1 insertion(+), 74 deletions(-)

diff --git a/common/Kconfig.boot b/common/Kconfig.boot
index 0d4c38402c..2399d5849e 100644
--- a/common/Kconfig.boot
+++ b/common/Kconfig.boot
@@ -35,34 +35,6 @@ config FIT_EXTERNAL_OFFSET
 	  could be put in the hole between data payload and fit image
 	  header, such as CSF data on i.MX platform.
 
-config FIT_SHA256
-	bool "Support SHA256 checksum of FIT image contents"
-	default y
-	select SHA256
-	help
-	  Enable this to support SHA256 checksum of FIT image contents. A
-	  SHA256 checksum is a 256-bit (32-byte) hash value used to check that
-	  the image contents have not been corrupted.
-
-config FIT_SHA384
-	bool "Support SHA384 checksum of FIT image contents"
-	default n
-	select SHA384
-	help
-	  Enable this to support SHA384 checksum of FIT image contents. A
-	  SHA384 checksum is a 384-bit (48-byte) hash value used to check that
-	  the image contents have not been corrupted. Use this for the highest
-	  security.
-
-config FIT_SHA512
-	bool "Support SHA512 checksum of FIT image contents"
-	default n
-	select SHA512
-	help
-	  Enable this to support SHA512 checksum of FIT image contents. A
-	  SHA512 checksum is a 512-bit (64-byte) hash value used to check that
-	  the image contents have not been corrupted.
-
 config FIT_FULL_CHECK
 	bool "Do a full check of the FIT before using it"
 	default y
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index c155a3b5fc..d69d1fa5f7 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -439,48 +439,6 @@ config SPL_MD5
 	  applications where images may be changed maliciously, you should
 	  consider SHA256 or SHA384.
 
-config SPL_FIT_SHA1
-	bool "Support SHA1"
-	depends on SPL_FIT
-	select SHA1
-	help
-	  Enable this to support SHA1 in FIT images within SPL. A SHA1
-	  checksum is a 160-bit (20-byte) hash value used to check that the
-	  image contents have not been corrupted or maliciously altered.
-	  While SHA1 is fairly secure it is coming to the end of its life
-	  due to the expanding computing power available to brute-force
-	  attacks. For more security, consider SHA256 or SHA384.
-
-config SPL_FIT_SHA256
-	bool "Support SHA256"
-	depends on SPL_FIT
-	select SHA256
-	help
-	  Enable this to support SHA256 in FIT images within SPL. A SHA256
-	  checksum is a 256-bit (32-byte) hash value used to check that the
-	  image contents have not been corrupted.
-
-config SPL_FIT_SHA384
-	bool "Support SHA384"
-	depends on SPL_FIT
-	select SHA384
-	select SHA512_ALGO
-	help
-	  Enable this to support SHA384 in FIT images within SPL. A SHA384
-	  checksum is a 384-bit (48-byte) hash value used to check that the
-	  image contents have not been corrupted. Use this for the highest
-	  security.
-
-config SPL_FIT_SHA512
-	bool "Support SHA512"
-	depends on SPL_FIT
-	select SHA512
-	select SHA512_ALGO
-	help
-	  Enable this to support SHA512 in FIT images within SPL. A SHA512
-	  checksum is a 512-bit (64-byte) hash value used to check that the
-	  image contents have not been corrupted.
-
 config SPL_FIT_IMAGE_TINY
 	bool "Remove functionality from SPL FIT loading to reduce size"
 	depends on SPL_FIT
diff --git a/configs/mt8516_pumpkin_defconfig b/configs/mt8516_pumpkin_defconfig
index 0a6c1fccae..1478b01716 100644
--- a/configs/mt8516_pumpkin_defconfig
+++ b/configs/mt8516_pumpkin_defconfig
@@ -13,7 +13,7 @@ CONFIG_DEBUG_UART_CLOCK=26000000
 # CONFIG_PSCI_RESET is not set
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
-# CONFIG_FIT_SHA256 is not set
+# CONFIG_SHA256 is not set
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_DEFAULT_FDT_FILE="mt8516-pumpkin"
 # CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/include/image.h b/include/image.h
index e20f0b69d5..489b220eba 100644
--- a/include/image.h
+++ b/include/image.h
@@ -31,9 +31,6 @@ struct fdt_region;
 #define IMAGE_ENABLE_OF_LIBFDT	1
 #define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
 #define CONFIG_FIT_RSASSA_PSS 1
-#define CONFIG_FIT_SHA256
-#define CONFIG_FIT_SHA384
-#define CONFIG_FIT_SHA512
 #define CONFIG_SHA1
 #define CONFIG_SHA256
 #define CONFIG_SHA384
-- 
2.31.1