From: Michael Walle <michael@walle.cc>
To: u-boot@lists.denx.de
Cc: Jagan Teki <jagan@amarulasolutions.com>,
Priyanka Jain <priyanka.jain@nxp.com>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Tom Rini <trini@konsulko.com>,
Peter Griffin <peter.griffin@linaro.org>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
Michael Walle <michael@walle.cc>
Subject: [PATCH v3 01/29] armv8: ls1028a: add IOMMU stream ID to vivante node
Date: Thu, 2 Sep 2021 18:45:30 +0200 [thread overview]
Message-ID: <20210902164558.1920849-2-michael@walle.cc> (raw)
In-Reply-To: <20210902164558.1920849-1-michael@walle.cc>
The fixup is done for the "fsl,ls1028a-gpu" which isn't any official
device tree binding. Don't break it, but instead add a fixup for another
compatible "vivante,gc" which is the offical one for the GPU on the
LS1028A.
Signed-off-by: Michael Walle <michael@walle.cc>
---
arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c
index 49df8b3790..d93a793f39 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c
@@ -18,6 +18,7 @@ struct icid_id_table icid_tbl[] = {
SET_SATA_ICID(1, "fsl,ls1028a-ahci", FSL_SATA1_STREAM_ID),
SET_EDMA_ICID(FSL_EDMA_STREAM_ID),
SET_QDMA_ICID("fsl,ls1028a-qdma", FSL_DMA_STREAM_ID),
+ SET_GPU_ICID("vivante,gc", FSL_GPU_STREAM_ID),
SET_GPU_ICID("fsl,ls1028a-gpu", FSL_GPU_STREAM_ID),
SET_DISPLAY_ICID(FSL_DISPLAY_STREAM_ID),
#ifdef CONFIG_FSL_CAAM
--
2.30.2
next prev parent reply other threads:[~2021-09-02 16:46 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-02 16:45 [PATCH v3 00/29] arm: dts: ls1028a: sync device tree with linux Michael Walle
2021-09-02 16:45 ` Michael Walle [this message]
2021-09-16 9:53 ` [PATCH v3 01/29] armv8: ls1028a: add IOMMU stream ID to vivante node Vladimir Oltean
2021-09-16 10:15 ` Michael Walle
2021-09-02 16:45 ` [PATCH v3 02/29] arm: dts: ls1028a: remove /memory node Michael Walle
2021-09-02 16:45 ` [PATCH v3 03/29] arm: dts: ls1028a-{rdb, qds}: remove dm-pre-reloc property Michael Walle
2021-09-14 23:43 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 04/29] arm: dts: ls1028a: add an empty /soc Michael Walle
2021-09-14 23:43 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 05/29] arm: dts: ls1028a: move the clockgen node into /soc Michael Walle
2021-09-14 23:44 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 06/29] arm: dts: ls1028a: move I2C controller nodes " Michael Walle
2021-09-14 23:47 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 07/29] arm: dts: ls1028a: move the FlexSPI controller node Michael Walle
2021-09-14 23:47 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 08/29] arm: dts: ls1028a: move the SPI and eSDHC controller nodes into /soc Michael Walle
2021-09-14 23:48 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 09/29] arm: dts: ls1028a: move the UART " Michael Walle
2021-09-14 23:49 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 10/29] arm: dts: ls1028a: move the low-power UART " Michael Walle
2021-09-14 23:50 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 11/29] arm: dts: ls1028a: move the GPIO controller " Michael Walle
2021-09-14 23:51 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 12/29] arm: dts: ls1028a: move SATA and USB " Michael Walle
2021-09-14 23:52 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 13/29] arm: dts: ls1028a: move the PCIe " Michael Walle
2021-09-14 23:53 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 14/29] arm: dts: ls1028a: move the watchdog node " Michael Walle
2021-09-14 23:54 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 15/29] arm: dts: ls1028a: move the iRC node and its devices " Michael Walle
2021-09-14 23:56 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 16/29] arm: dts: ls1028a: update the labels Michael Walle
2021-09-15 0:02 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 17/29] watchdog: sp805_wdt: use correct compatible string Michael Walle
2021-09-02 16:45 ` [PATCH v3 18/29] spi: fsl_dspi: add new compatible fsl, ls1021a-v1.0-dspi Michael Walle
2021-09-02 16:45 ` [PATCH v3 19/29] spi: fsl_dspi: rename num-cs to spi-num-chipselects Michael Walle
2021-09-15 0:05 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 20/29] serial: lpuart: add new compatible fsl, ls1028a-lpuart Michael Walle
2021-09-02 16:45 ` [PATCH v3 21/29] scsi: ceva: rename the resource name to match the linux kernel one Michael Walle
2021-09-15 0:10 ` Vladimir Oltean
2021-09-15 7:26 ` Michael Walle
2021-09-02 16:45 ` [PATCH v3 22/29] usb: xhci: fsl: add new compatible fsl,ls1028a-dwc3 Michael Walle
2021-09-03 23:51 ` [PATCH v3 22/29] usb: xhci: fsl: add new compatible fsl, ls1028a-dwc3 Bin Meng
2021-09-02 16:45 ` [PATCH v3 23/29] pci: layerscape: add official ls1028a binding support Michael Walle
2021-09-02 16:45 ` [PATCH v3 24/29] arm: dts: ls1028a: remove num-lanes in the PCIe controller nodes Michael Walle
2021-09-15 0:12 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 25/29] arm: dts: ls1028a: move the PCI I/O window to match Michael Walle
2021-09-15 0:13 ` Vladimir Oltean
2021-09-16 4:03 ` Z.Q. Hou
2021-09-02 16:45 ` [PATCH v3 26/29] arm: dts: ls1028a: disable the PCIe controller by default Michael Walle
2021-09-15 0:14 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 27/29] arm: dts: ls1028a: drop non-removable property from esdhc controller node Michael Walle
2021-09-15 0:17 ` Vladimir Oltean
2021-09-15 8:09 ` Michael Walle
2021-09-15 10:36 ` Vladimir Oltean
2021-10-05 7:57 ` Michael Walle
2021-09-02 16:45 ` [PATCH v3 28/29] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux Michael Walle
2021-09-15 0:24 ` Vladimir Oltean
2021-09-02 16:45 ` [PATCH v3 29/29] arm: dts: sl28: sync dtbs Michael Walle
2021-09-15 0:27 ` Vladimir Oltean
2021-10-05 0:39 ` [PATCH v3 00/29] arm: dts: ls1028a: sync device tree with linux Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210902164558.1920849-2-michael@walle.cc \
--to=michael@walle.cc \
--cc=jagan@amarulasolutions.com \
--cc=manivannan.sadhasivam@linaro.org \
--cc=peter.griffin@linaro.org \
--cc=priyanka.jain@nxp.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox