[PATCH 14/20] Convert CONFIG_IMX_BOOTAUX et al to Kconfig

public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed

From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [PATCH 14/20] Convert CONFIG_IMX_BOOTAUX et al to Kconfig
Date: Sun,  7 Nov 2021 22:59:45 -0500	[thread overview]
Message-ID: <20211108035951.3580952-14-trini@konsulko.com> (raw)
In-Reply-To: <20211108035951.3580952-1-trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_IMX_BOOTAUX
   CONFIG_IMX_THERMAL

Signed-off-by: Tom Rini <trini@konsulko.com>
---
 configs/imx8mq_cm_defconfig         | 1 +
 configs/imx8mq_evk_defconfig        | 1 +
 configs/imx8mq_phanbell_defconfig   | 1 +
 configs/pico-imx8mq_defconfig       | 1 +
 configs/seeed_npi_imx6ull_defconfig | 1 +
 include/configs/imx8mq_cm.h         | 2 --
 include/configs/imx8mq_evk.h        | 2 --
 include/configs/imx8mq_phanbell.h   | 2 --
 include/configs/npi_imx6ull.h       | 2 --
 include/configs/pico-imx8mq.h       | 2 --
 10 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/configs/imx8mq_cm_defconfig b/configs/imx8mq_cm_defconfig
index cf01e8dcd059..907b1d2f1587 100644
--- a/configs/imx8mq_cm_defconfig
+++ b/configs/imx8mq_cm_defconfig
@@ -17,6 +17,7 @@ CONFIG_TARGET_IMX8MQ_CM=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL=y
+CONFIG_IMX_BOOTAUX=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_FIT=y
diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig
index cf6068c0f4d8..92aae70d4a4c 100644
--- a/configs/imx8mq_evk_defconfig
+++ b/configs/imx8mq_evk_defconfig
@@ -18,6 +18,7 @@ CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
+CONFIG_IMX_BOOTAUX=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_FIT=y
diff --git a/configs/imx8mq_phanbell_defconfig b/configs/imx8mq_phanbell_defconfig
index 4b7fafe788d5..72ff17f93e46 100644
--- a/configs/imx8mq_phanbell_defconfig
+++ b/configs/imx8mq_phanbell_defconfig
@@ -19,6 +19,7 @@ CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
+CONFIG_IMX_BOOTAUX=y
 CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
diff --git a/configs/pico-imx8mq_defconfig b/configs/pico-imx8mq_defconfig
index c866e0e2f0b5..419537090f50 100644
--- a/configs/pico-imx8mq_defconfig
+++ b/configs/pico-imx8mq_defconfig
@@ -18,6 +18,7 @@ CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
+CONFIG_IMX_BOOTAUX=y
 CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
diff --git a/configs/seeed_npi_imx6ull_defconfig b/configs/seeed_npi_imx6ull_defconfig
index f08542aa2d4f..6489e8bc61aa 100644
--- a/configs/seeed_npi_imx6ull_defconfig
+++ b/configs/seeed_npi_imx6ull_defconfig
@@ -66,5 +66,6 @@ CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_MXC_UART=y
+CONFIG_IMX_THERMAL=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h
index 9b786620ce37..7206c08a8c9b 100644
--- a/include/configs/imx8mq_cm.h
+++ b/include/configs/imx8mq_cm.h
@@ -88,8 +88,6 @@
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define CONFIG_IMX_BOOTAUX
-
 #define CONFIG_SYS_FSL_USDHC_NUM		2
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 
diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index fa1f29f27434..49a9526d96ee 100644
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -99,8 +99,6 @@
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define CONFIG_IMX_BOOTAUX
-
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 
diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h
index c45631a362fb..0366c113e3d3 100644
--- a/include/configs/imx8mq_phanbell.h
+++ b/include/configs/imx8mq_phanbell.h
@@ -143,8 +143,6 @@
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define CONFIG_IMX_BOOTAUX
-
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 
diff --git a/include/configs/npi_imx6ull.h b/include/configs/npi_imx6ull.h
index 31452497a4d6..eb32d83e114b 100644
--- a/include/configs/npi_imx6ull.h
+++ b/include/configs/npi_imx6ull.h
@@ -52,8 +52,6 @@
 #define CONFIG_ETHPRIME			"eth0"
 #endif
 
-#define CONFIG_IMX_THERMAL
-
 #define CONFIG_FEC_ENET_DEV		1
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h
index 51858ee9343b..5c1b65207e09 100644
--- a/include/configs/pico-imx8mq.h
+++ b/include/configs/pico-imx8mq.h
@@ -122,8 +122,6 @@
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define CONFIG_IMX_BOOTAUX
-
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 
-- 
2.25.1

next prev parent reply	other threads:[~2021-11-08  4:03 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-08  3:59 [PATCH 01/20] Convert CONFIG_ARCH_CPU_INIT to Kconfig Tom Rini
2021-11-08  3:59 ` [PATCH 02/20] Convert CONFIG_E1000 " Tom Rini
2021-11-13  0:02   ` Tom Rini
2021-11-08  3:59 ` [PATCH 03/20] Convert CONFIG_DOS_PARTITION " Tom Rini
2021-11-13  0:02   ` Tom Rini
2021-11-08  3:59 ` [PATCH 04/20] Convert CONFIG_BITBANGMII " Tom Rini
2021-11-13  0:02   ` Tom Rini
2021-11-08  3:59 ` [PATCH 05/20] Convert CONFIG_FSL_LAYERSCAPE " Tom Rini
2021-11-13  0:02   ` Tom Rini
2021-11-08  3:59 ` [PATCH 06/20] Convert CONFIG_FSL_USDHC " Tom Rini
2021-11-13  0:02   ` Tom Rini
2021-11-08  3:59 ` [PATCH 07/20] Convert CONFIG_ENV_IS_IN_SPI_FLASH et al " Tom Rini
2021-11-13  0:02   ` Tom Rini
2021-11-08  3:59 ` [PATCH 08/20] Convert CONFIG_SYS_CONSOLE_IS_IN_ENV " Tom Rini
2021-11-13  0:03   ` Tom Rini
2021-11-08  3:59 ` [PATCH 09/20] Convert CONFIG_TRACE et al " Tom Rini
2021-11-13  0:03   ` Tom Rini
2021-11-08  3:59 ` [PATCH 10/20] Convert CONFIG_MISC_INIT_F " Tom Rini
2021-11-13  0:03   ` Tom Rini
2021-11-08  3:59 ` [PATCH 11/20] Convert CONFIG_PHYLIB " Tom Rini
2021-11-13  0:03   ` Tom Rini
2021-11-08  3:59 ` [PATCH 12/20] Convert CONFIG_I2C_EDID " Tom Rini
2021-11-13  0:03   ` Tom Rini
2021-11-08  3:59 ` [PATCH 13/20] # This is a combination of 2 commits. # This is the 1st commit message: Tom Rini
2021-11-08 15:33   ` Tom Rini
2021-11-13  0:03   ` [PATCH 13/20] Convert CONFIG_SYS_PROMPT et al to Kconfig Tom Rini
2021-11-08  3:59 ` Tom Rini [this message]
2021-11-13  0:03   ` [PATCH 14/20] Convert CONFIG_IMX_BOOTAUX " Tom Rini
2021-11-08  3:59 ` [PATCH 15/20] Convert CONFIG_MX6 " Tom Rini
2021-11-13  0:03   ` Tom Rini
2021-11-08  3:59 ` [PATCH 16/20] Convert CONFIG_MD5 " Tom Rini
2021-11-13  0:03   ` Tom Rini
2021-11-08  3:59 ` [PATCH 17/20] Convert CONFIG_MACB " Tom Rini
2021-11-13  0:03   ` Tom Rini
2021-11-08  3:59 ` [PATCH 18/20] Convert CONFIG_PL011_SERIAL et al " Tom Rini
2021-11-13  0:03   ` Tom Rini
2021-11-08  3:59 ` [PATCH 19/20] Remove CONFIG_SERIAL_MULTI Tom Rini
2021-11-13  0:04   ` Tom Rini
2021-11-08  3:59 ` [PATCH 20/20] Convert CONFIG_LAST_STAGE_INIT to Kconfig Tom Rini
2021-11-13  0:04   ` Tom Rini
2021-11-13  0:02 ` [PATCH 01/20] Convert CONFIG_ARCH_CPU_INIT " Tom Rini

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:cf01e8dcd05 dfblob:907b1d2f158 dfblob:cf6068c0f4d
dfblob:92aae70d4a4 dfblob:4b7fafe788d dfblob:72ff17f93e4
dfblob:c866e0e2f0b dfblob:419537090f5 dfblob:f08542aa2d4
dfblob:6489e8bc61a dfblob:9b786620ce3 dfblob:7206c08a8c9
dfblob:fa1f29f2743 dfblob:49a9526d96e dfblob:c45631a362f
dfblob:0366c113e3d dfblob:31452497a4d dfblob:eb32d83e114
dfblob:51858ee9343 dfblob:5c1b65207e0 )
 OR (
bs:"[PATCH 14/20] Convert CONFIG_IMX_BOOTAUX et al to Kconfig" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211108035951.3580952-14-trini@konsulko.com \
    --to=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox