From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [PATCH 17/20] Convert CONFIG_MACB to Kconfig
Date: Sun, 7 Nov 2021 22:59:48 -0500 [thread overview]
Message-ID: <20211108035951.3580952-17-trini@konsulko.com> (raw)
In-Reply-To: <20211108035951.3580952-1-trini@konsulko.com>
This converts the following to Kconfig:
CONFIG_MACB
Signed-off-by: Tom Rini <trini@konsulko.com>
---
configs/axm_defconfig | 2 +-
configs/corvus_defconfig | 2 +-
configs/ethernut5_defconfig | 2 ++
configs/gurnard_defconfig | 2 +-
configs/meesc_dataflash_defconfig | 1 +
configs/meesc_defconfig | 1 +
configs/smartweb_defconfig | 2 +-
configs/snapper9260_defconfig | 2 ++
configs/snapper9g20_defconfig | 2 ++
configs/taurus_defconfig | 2 +-
configs/usb_a9263_dataflash_defconfig | 1 +
configs/vinco_defconfig | 1 +
drivers/net/Kconfig | 1 -
include/configs/corvus.h | 1 -
include/configs/ethernut5.h | 1 -
include/configs/meesc.h | 1 -
include/configs/smartweb.h | 1 -
include/configs/snapper9260.h | 1 -
include/configs/snapper9g45.h | 1 -
include/configs/taurus.h | 1 -
include/configs/usb_a9263.h | 1 -
include/configs/vinco.h | 1 -
22 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/configs/axm_defconfig b/configs/axm_defconfig
index 78449a59db14..518e6d44c08d 100644
--- a/configs/axm_defconfig
+++ b/configs/axm_defconfig
@@ -81,7 +81,7 @@ CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
+CONFIG_MACB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_SPECIFY_CONSOLE_INDEX=y
diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig
index a3f144da3078..2f3803a05828 100644
--- a/configs/corvus_defconfig
+++ b/configs/corvus_defconfig
@@ -67,7 +67,7 @@ CONFIG_SYS_NAND_PAGE_SIZE=0x800
CONFIG_SYS_NAND_OOBSIZE=0x40
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000
-CONFIG_PHYLIB=y
+CONFIG_MACB=y
CONFIG_ATMEL_USART=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/ethernut5_defconfig b/configs/ethernut5_defconfig
index 0faeb63a583a..1cf38b8d77b1 100644
--- a/configs/ethernut5_defconfig
+++ b/configs/ethernut5_defconfig
@@ -34,6 +34,7 @@ CONFIG_CMD_SPI=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_RARP=y
CONFIG_CMD_MII=y
+# CONFIG_CMD_MDIO is not set
CONFIG_CMD_PING=y
CONFIG_CMD_CDP=y
CONFIG_CMD_SNTP=y
@@ -69,6 +70,7 @@ CONFIG_NAND_ATMEL=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_DATAFLASH=y
+CONFIG_MACB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_RTC_PCF8563=y
diff --git a/configs/gurnard_defconfig b/configs/gurnard_defconfig
index 35a2d2ea6052..7c7974c123c1 100644
--- a/configs/gurnard_defconfig
+++ b/configs/gurnard_defconfig
@@ -43,7 +43,7 @@ CONFIG_MTD_RAW_NAND=y
# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
CONFIG_NAND_ATMEL=y
CONFIG_ATMEL_NAND_HWECC=y
-CONFIG_PHYLIB=y
+CONFIG_MACB=y
CONFIG_ATMEL_USART=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
diff --git a/configs/meesc_dataflash_defconfig b/configs/meesc_dataflash_defconfig
index e36be6eebbad..6fda013ab12f 100644
--- a/configs/meesc_dataflash_defconfig
+++ b/configs/meesc_dataflash_defconfig
@@ -40,6 +40,7 @@ CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_DATAFLASH=y
+CONFIG_MACB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
diff --git a/configs/meesc_defconfig b/configs/meesc_defconfig
index 887f481c07e3..cc7697bb2dda 100644
--- a/configs/meesc_defconfig
+++ b/configs/meesc_defconfig
@@ -40,6 +40,7 @@ CONFIG_NAND_ATMEL=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_DATAFLASH=y
+CONFIG_MACB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig
index 712e517a4717..af6e9257acb6 100644
--- a/configs/smartweb_defconfig
+++ b/configs/smartweb_defconfig
@@ -69,7 +69,7 @@ CONFIG_SYS_NAND_PAGE_SIZE=0x800
CONFIG_SYS_NAND_OOBSIZE=0x40
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000
-CONFIG_PHYLIB=y
+CONFIG_MACB=y
CONFIG_ATMEL_USART=y
CONFIG_USB=y
CONFIG_USB_GADGET=y
diff --git a/configs/snapper9260_defconfig b/configs/snapper9260_defconfig
index 4a2527c08e4f..4b3267e504ca 100644
--- a/configs/snapper9260_defconfig
+++ b/configs/snapper9260_defconfig
@@ -28,6 +28,7 @@ CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
+# CONFIG_CMD_MDIO is not set
CONFIG_CMD_PING=y
CONFIG_CMD_FAT=y
CONFIG_ENV_OVERWRITE=y
@@ -44,4 +45,5 @@ CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
CONFIG_NAND_ATMEL=y
+CONFIG_MACB=y
CONFIG_ATMEL_USART=y
diff --git a/configs/snapper9g20_defconfig b/configs/snapper9g20_defconfig
index a905359eb8ca..3674c8f2c6f7 100644
--- a/configs/snapper9g20_defconfig
+++ b/configs/snapper9g20_defconfig
@@ -27,6 +27,7 @@ CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
+# CONFIG_CMD_MDIO is not set
CONFIG_CMD_PING=y
CONFIG_CMD_FAT=y
CONFIG_ENV_OVERWRITE=y
@@ -43,4 +44,5 @@ CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
CONFIG_NAND_ATMEL=y
+CONFIG_MACB=y
CONFIG_ATMEL_USART=y
diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig
index 1720e1de4270..eaede092f853 100644
--- a/configs/taurus_defconfig
+++ b/configs/taurus_defconfig
@@ -87,7 +87,7 @@ CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
+CONFIG_MACB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_SPECIFY_CONSOLE_INDEX=y
diff --git a/configs/usb_a9263_dataflash_defconfig b/configs/usb_a9263_dataflash_defconfig
index 5bf0e7535380..f1385147ed94 100644
--- a/configs/usb_a9263_dataflash_defconfig
+++ b/configs/usb_a9263_dataflash_defconfig
@@ -47,6 +47,7 @@ CONFIG_NAND_ATMEL=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_DATAFLASH=y
+CONFIG_MACB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
diff --git a/configs/vinco_defconfig b/configs/vinco_defconfig
index e90e362a4099..053702b206e8 100644
--- a/configs/vinco_defconfig
+++ b/configs/vinco_defconfig
@@ -36,6 +36,7 @@ CONFIG_AT91_GPIO=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=50000000
+CONFIG_MACB=y
CONFIG_PHY_SMSC=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_ATMEL_USART=y
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 6c12959f3794..37ff9315afc0 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -440,7 +440,6 @@ config MVPP2
config MACB
bool "Cadence MACB/GEM Ethernet Interface"
- depends on DM_ETH
select PHYLIB
help
The Cadence MACB ethernet interface is found on many Atmel
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index f0e5bcefe39e..882cb48ecaab 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -70,7 +70,6 @@
#endif
/* Ethernet */
-#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_AT91_WANTS_COMMON_PHY
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 80108fc89957..c0bdfd3f8f14 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -60,7 +60,6 @@
/* Ethernet */
#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_PHY_ID 0
#define CONFIG_MACB_SEARCH_PHY
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index 3457c598857d..55f64b559c75 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -72,7 +72,6 @@
#endif
/* Ethernet */
-#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT 20
#undef CONFIG_RESET_PHY_R
diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index f43304d8448b..7ce3aeafe3c1 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -85,7 +85,6 @@
* Ethernet configuration
*
*/
-#define CONFIG_MACB
#define CONFIG_RMII /* use reduced MII inteface */
#define CONFIG_NET_RETRY_COUNT 20 /* # of DHCP/BOOTP retries */
#define CONFIG_AT91_WANTS_COMMON_PHY
diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 32abeb03fb49..10f8fde8d583 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -38,7 +38,6 @@
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
/* Ethernet */
-#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_RESET_PHY_R
diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h
index b13584da51c8..de918e768033 100644
--- a/include/configs/snapper9g45.h
+++ b/include/configs/snapper9g45.h
@@ -39,7 +39,6 @@
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8
/* Ethernet */
-#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_RESET_PHY_R
diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index 1dd78238947f..e4609b5c8971 100644
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -68,7 +68,6 @@
#endif
/* Ethernet */
-#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_AT91_WANTS_COMMON_PHY
diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h
index c12e53690d0f..49895e7ab30e 100644
--- a/include/configs/usb_a9263.h
+++ b/include/configs/usb_a9263.h
@@ -48,7 +48,6 @@
#endif
/* Ethernet */
-#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_AT91_WANTS_COMMON_PHY
diff --git a/include/configs/vinco.h b/include/configs/vinco.h
index 7397d3e8b3e7..b353c372efe9 100644
--- a/include/configs/vinco.h
+++ b/include/configs/vinco.h
@@ -51,7 +51,6 @@
/* USB device */
/* Ethernet Hardware */
-#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_MACB_SEARCH_PHY
--
2.25.1
next prev parent reply other threads:[~2021-11-08 4:03 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-08 3:59 [PATCH 01/20] Convert CONFIG_ARCH_CPU_INIT to Kconfig Tom Rini
2021-11-08 3:59 ` [PATCH 02/20] Convert CONFIG_E1000 " Tom Rini
2021-11-13 0:02 ` Tom Rini
2021-11-08 3:59 ` [PATCH 03/20] Convert CONFIG_DOS_PARTITION " Tom Rini
2021-11-13 0:02 ` Tom Rini
2021-11-08 3:59 ` [PATCH 04/20] Convert CONFIG_BITBANGMII " Tom Rini
2021-11-13 0:02 ` Tom Rini
2021-11-08 3:59 ` [PATCH 05/20] Convert CONFIG_FSL_LAYERSCAPE " Tom Rini
2021-11-13 0:02 ` Tom Rini
2021-11-08 3:59 ` [PATCH 06/20] Convert CONFIG_FSL_USDHC " Tom Rini
2021-11-13 0:02 ` Tom Rini
2021-11-08 3:59 ` [PATCH 07/20] Convert CONFIG_ENV_IS_IN_SPI_FLASH et al " Tom Rini
2021-11-13 0:02 ` Tom Rini
2021-11-08 3:59 ` [PATCH 08/20] Convert CONFIG_SYS_CONSOLE_IS_IN_ENV " Tom Rini
2021-11-13 0:03 ` Tom Rini
2021-11-08 3:59 ` [PATCH 09/20] Convert CONFIG_TRACE et al " Tom Rini
2021-11-13 0:03 ` Tom Rini
2021-11-08 3:59 ` [PATCH 10/20] Convert CONFIG_MISC_INIT_F " Tom Rini
2021-11-13 0:03 ` Tom Rini
2021-11-08 3:59 ` [PATCH 11/20] Convert CONFIG_PHYLIB " Tom Rini
2021-11-13 0:03 ` Tom Rini
2021-11-08 3:59 ` [PATCH 12/20] Convert CONFIG_I2C_EDID " Tom Rini
2021-11-13 0:03 ` Tom Rini
2021-11-08 3:59 ` [PATCH 13/20] # This is a combination of 2 commits. # This is the 1st commit message: Tom Rini
2021-11-08 15:33 ` Tom Rini
2021-11-13 0:03 ` [PATCH 13/20] Convert CONFIG_SYS_PROMPT et al to Kconfig Tom Rini
2021-11-08 3:59 ` [PATCH 14/20] Convert CONFIG_IMX_BOOTAUX " Tom Rini
2021-11-13 0:03 ` Tom Rini
2021-11-08 3:59 ` [PATCH 15/20] Convert CONFIG_MX6 " Tom Rini
2021-11-13 0:03 ` Tom Rini
2021-11-08 3:59 ` [PATCH 16/20] Convert CONFIG_MD5 " Tom Rini
2021-11-13 0:03 ` Tom Rini
2021-11-08 3:59 ` Tom Rini [this message]
2021-11-13 0:03 ` [PATCH 17/20] Convert CONFIG_MACB " Tom Rini
2021-11-08 3:59 ` [PATCH 18/20] Convert CONFIG_PL011_SERIAL et al " Tom Rini
2021-11-13 0:03 ` Tom Rini
2021-11-08 3:59 ` [PATCH 19/20] Remove CONFIG_SERIAL_MULTI Tom Rini
2021-11-13 0:04 ` Tom Rini
2021-11-08 3:59 ` [PATCH 20/20] Convert CONFIG_LAST_STAGE_INIT to Kconfig Tom Rini
2021-11-13 0:04 ` Tom Rini
2021-11-13 0:02 ` [PATCH 01/20] Convert CONFIG_ARCH_CPU_INIT " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211108035951.3580952-17-trini@konsulko.com \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox