From: Tom Rini <trini@konsulko.com>
To: Sinthu Raja <sinthu.raja@mistralsolutions.com>
Cc: u-boot@lists.denx.de, Praneeth Bajjuri <praneeth@ti.com>,
Sinthu Raja <sinthu.raja@ti.com>
Subject: Re: [PATCH V2 11/17] arm: dts: k3-j721e-sk: Add initial A72 specific dts support
Date: Mon, 8 Nov 2021 10:47:59 -0500 [thread overview]
Message-ID: <20211108154759.GA24579@bill-the-cat> (raw)
In-Reply-To: <20211102140558.32460-12-sinthu.raja@ti.com>
[-- Attachment #1: Type: text/plain, Size: 1698 bytes --]
On Tue, Nov 02, 2021 at 07:35:52PM +0530, Sinthu Raja wrote:
> From: Sinthu Raja <sinthu.raja@ti.com>
>
> J721E Starter Kit (SK)[1] is a low cost, small form factor board designed
> for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high
> performance vision accelerators, video codec accelerators, latest C71x
> and C66x DSP, high bandwidth real-time IPs for capture and display, GPU,
> dedicated safety island and security accelerators. The SoC is power
> optimized to provide best in class performance for industrial and
> automotive applications.
>
> J721E SK supports the following interfaces:
> * 4 GB LPDDR4 RAM
> * x1 Gigabit Ethernet interface
> * x1 USB 3.0 Type-C port
> * x3 USB 3.0 Type-A ports
> * x1 PCIe M.2 E Key
> * x1 PCIe M.2 M Key
> * 512 Mbit OSPI flash
> * x2 CSI2 Camera interface (RPi and TI Camera connector)
> * 40-pin Raspberry Pi GPIO header
>
> Add A72 specific dts for J721E-SK.
>
> [1] https://www.ti.com/tool/SK-TDA4VM
>
> Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
> ---
>
> Changes in V2:
> * J721E EAIK board name is changed to J721E SK, rename all occurrences of eaik
> to sk.
> * Rename file from eaik to sk.
>
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/k3-j721e-sk-u-boot.dtsi | 280 ++++++++++
> arch/arm/dts/k3-j721e-sk.dts | 791 +++++++++++++++++++++++++++
> 3 files changed, 1073 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/k3-j721e-sk-u-boot.dtsi
> create mode 100644 arch/arm/dts/k3-j721e-sk.dts
Has arch/arm/dts/k3-j721e-sk.dts been queued up in linux-next or similar
yet?
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
next prev parent reply other threads:[~2021-11-08 15:48 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-02 14:05 [PATCH V2 00/17] Add support for J721E SK Sinthu Raja
2021-11-02 14:05 ` [PATCH V2 01/17] common: make: Support show_board_info() as part of SPL build Sinthu Raja
2021-11-08 15:49 ` Tom Rini
2021-11-02 14:05 ` [PATCH V2 02/17] drivers: power: pmic: Add support for tps659412 PMIC Sinthu Raja
2021-11-02 14:05 ` [PATCH V2 03/17] drivers: power: regulator: tps65941_regulator: Add support for 3Phase buck Sinthu Raja
2021-11-02 14:05 ` [PATCH V2 04/17] board: ti: j721e: Guard functions with right #ifdef to avoid build warnings Sinthu Raja
2021-11-08 15:49 ` Tom Rini
2021-11-02 14:05 ` [PATCH V2 05/17] board: ti: j721e: Enable support for reading EEPROM at next alternate address Sinthu Raja
2021-11-08 15:51 ` Tom Rini
2021-11-02 14:05 ` [PATCH V2 06/17] board: ti: j721e: Add support to update board_name for j721e-sk Sinthu Raja
2021-11-02 14:05 ` [PATCH V2 07/17] board: ti: j721e: Disable probing of daughtercards Sinthu Raja
2021-11-08 15:51 ` Tom Rini
2021-11-12 12:20 ` Sinthu Raja M
2021-11-02 14:05 ` [PATCH V2 08/17] board: ti: j721e: Add support for detecting multiple device trees Sinthu Raja
2021-11-02 14:05 ` [PATCH V2 09/17] arm: j721e: Add support for selecting DT based on EEPROM Sinthu Raja
2021-11-08 15:53 ` Tom Rini
2021-11-12 13:32 ` Sinthu Raja M
2021-11-12 14:46 ` Tom Rini
2021-11-02 14:05 ` [PATCH V2 10/17] arm: dts: k3-j721e-r5-common-proc-board: Do not use power-domains for I2C Sinthu Raja
2021-11-08 15:46 ` Tom Rini
2021-11-12 11:58 ` Sinthu Raja M
2021-11-12 14:42 ` Tom Rini
2021-11-02 14:05 ` [PATCH V2 11/17] arm: dts: k3-j721e-sk: Add initial A72 specific dts support Sinthu Raja
2021-11-08 15:47 ` Tom Rini [this message]
2021-11-12 11:59 ` Sinthu Raja M
2021-11-02 14:05 ` [PATCH V2 12/17] arm: dts: k3-j721e-r5-sk: Add initial R5 specific dts support for j721e-sk Sinthu Raja
2021-11-08 15:47 ` Tom Rini
2021-11-12 11:58 ` Sinthu Raja M
2021-11-02 14:05 ` [PATCH V2 13/17] configs: j721e_evm_r5: Enable support for building multiple dtbs into FIT Sinthu Raja
2021-11-02 14:05 ` [PATCH V2 14/17] configs: j721e_evm_a72: Add SK dtb as part of DTB FIT Sinthu Raja
2021-11-02 14:05 ` [PATCH V2 15/17] configs: j721e_evm_a72: Align OSPI partitions on erase block boundary Sinthu Raja
2021-11-02 14:05 ` [PATCH V2 16/17] configs: j721e_evm: Store env in MMC FAT partition Sinthu Raja
2021-11-02 14:05 ` [PATCH V2 17/17] include: configs: Update env for selecting right dtb Sinthu Raja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211108154759.GA24579@bill-the-cat \
--to=trini@konsulko.com \
--cc=praneeth@ti.com \
--cc=sinthu.raja@mistralsolutions.com \
--cc=sinthu.raja@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox