[PATCH 7/9] arm: mvebu: axp: Remove unreferenced ddr3_get_eprom_fabric() function

[Stefan Roese <sr@denx.de>]

This function is not referenced in mainline U-Boot. Let's remove now.

Signed-off-by: Stefan Roese <sr@denx.de>
---
 drivers/ddr/marvell/axp/ddr3_hw_training.h |  1 -
 drivers/ddr/marvell/axp/ddr3_init.c        | 24 ----------------------
 drivers/ddr/marvell/axp/ddr3_init.h        |  1 -
 3 files changed, 26 deletions(-)

diff --git a/drivers/ddr/marvell/axp/ddr3_hw_training.h b/drivers/ddr/marvell/axp/ddr3_hw_training.h
index 30daaa9831b9..fcdef792c76a 100644
--- a/drivers/ddr/marvell/axp/ddr3_hw_training.h
+++ b/drivers/ddr/marvell/axp/ddr3_hw_training.h
@@ -373,7 +373,6 @@ int ddr3_load_dqs_patterns(MV_DRAM_INFO *dram_info);
 
 void ddr3_static_training_init(void);
 
-u8 ddr3_get_eprom_fabric(void);
 void ddr3_set_performance_params(MV_DRAM_INFO *dram_info);
 int ddr3_dram_sram_burst(u32 src, u32 dst, u32 len);
 void ddr3_save_training(MV_DRAM_INFO *dram_info);
diff --git a/drivers/ddr/marvell/axp/ddr3_init.c b/drivers/ddr/marvell/axp/ddr3_init.c
index 607f3e12c3ae..c5aa1ac18f51 100644
--- a/drivers/ddr/marvell/axp/ddr3_init.c
+++ b/drivers/ddr/marvell/axp/ddr3_init.c
@@ -943,30 +943,6 @@ int ddr3_check_config(u32 twsi_addr, MV_CONFIG_TYPE config_type)
 	return 0;
 }
 
-#if defined(DB_88F78X60_REV2)
-/*
- * Name:     ddr3_get_eprom_fabric - Get Fabric configuration from EPROM
- * Desc:
- * Args:     twsi Address
- * Notes:    Only Available for ArmadaXP DB Rev2 boards
- * Returns:  None.
- */
-u8 ddr3_get_eprom_fabric(void)
-{
-#ifdef AUTO_DETECTION_SUPPORT
-	u8 data = 0;
-	int ret;
-
-	ret = i2c_read(NEW_FABRIC_TWSI_ADDR, 1, 1, (u8 *)&data, 1);
-	if (!ret)
-		return data & 0x1F;
-#endif
-
-	return 0;
-}
-
-#endif
-
 /*
  * Name:     ddr3_cl_to_valid_cl - this return register matching CL value
  * Desc:
diff --git a/drivers/ddr/marvell/axp/ddr3_init.h b/drivers/ddr/marvell/axp/ddr3_init.h
index 569a14b7184f..9a21886ac3e7 100644
--- a/drivers/ddr/marvell/axp/ddr3_init.h
+++ b/drivers/ddr/marvell/axp/ddr3_init.h
@@ -98,7 +98,6 @@ int ddr3_hw_training(u32 target_freq, u32 ddr_width,
 
 void ddr3_print_version(void);
 void fix_pll_val(u8 target_fab);
-u8 ddr3_get_eprom_fabric(void);
 u32 ddr3_get_fab_opt(void);
 u32 ddr3_get_cpu_freq(void);
 u32 ddr3_get_vco_freq(void);
-- 
2.34.0