From: Tony Dinh <mibodhi@gmail.com>
To: U-Boot Mailing List <u-boot@lists.denx.de>, Stefan Roese <sr@denx.de>
Cc: "David Purdy" <david.c.purdy@gmail.com>,
"Tom Rini" <trini@konsulko.com>,
"Marek Beh�n" <marek.behun@nic.cz>,
"Pali Roh�r" <pali@kernel.org>, "Tony Dinh" <mibodhi@gmail.com>
Subject: [PATCH 6/8] arm: kirkwood: Pogoplug-V4 : Add board implementation header
Date: Fri, 17 Dec 2021 20:23:32 -0800 [thread overview]
Message-ID: <20211218042335.5865-7-mibodhi@gmail.com> (raw)
In-Reply-To: <20211218042335.5865-1-mibodhi@gmail.com>
Add board implementation header and Makefile for Pogoplug V4
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
---
board/cloudengines/pogo_v4/Makefile | 10 ++++++++
board/cloudengines/pogo_v4/pogo_v4.h | 36 ++++++++++++++++++++++++++++
2 files changed, 46 insertions(+)
create mode 100644 board/cloudengines/pogo_v4/Makefile
create mode 100644 board/cloudengines/pogo_v4/pogo_v4.h
diff --git a/board/cloudengines/pogo_v4/Makefile b/board/cloudengines/pogo_v4/Makefile
new file mode 100644
index 0000000000..511bf5ff7e
--- /dev/null
+++ b/board/cloudengines/pogo_v4/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2014-2021 Tony Dinh <mibodhi@gmail.com>
+#
+# Based on
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+#
+
+obj-y := pogo_v4.o
diff --git a/board/cloudengines/pogo_v4/pogo_v4.h b/board/cloudengines/pogo_v4/pogo_v4.h
new file mode 100644
index 0000000000..bf3060de60
--- /dev/null
+++ b/board/cloudengines/pogo_v4/pogo_v4.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014-2021 Tony Dinh <mibodhi@gmail.com>
+ *
+ * Based on
+ * Copyright (C) 2012 David Purdy <david.c.purdy@gmail.com>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#ifndef __POGO_V4_H
+#define __POGO_V4_H
+
+#include <linux/bitops.h>
+
+/* GPIO configuration */
+#define POGO_V4_OE_LOW (~(0))
+#define POGO_V4_OE_HIGH (~(0))
+#define POGO_V4_OE_VAL_LOW BIT(29)
+#define POGO_V4_OE_VAL_HIGH 0
+
+/* PHY related */
+#define MV88E1116_LED_FCTRL_REG 10
+#define MV88E1116_CPRSP_CR3_REG 21
+#define MV88E1116_MAC_CTRL_REG 21
+#define MV88E1116_PGADR_REG 22
+#define MV88E1116_RGMII_TXTM_CTRL BIT(4)
+#define MV88E1116_RGMII_RXTM_CTRL BIT(5)
+
+/* button */
+#define BTN_EJECT 29
+
+#endif /* __POGO_V4_H */
--
2.20.1
next prev parent reply other threads:[~2021-12-18 4:26 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-18 4:23 [PATCH 0/8] arm: kirkwood: Add support for Pogoplug V4 Tony Dinh
2021-12-18 4:23 ` [PATCH 1/8] arm: kirkwood: Pogoplug-V4 : Add DTS files Tony Dinh
2021-12-18 16:38 ` Andre Przywara
2021-12-18 22:05 ` Tony Dinh
2021-12-19 0:03 ` Andre Przywara
2021-12-19 1:23 ` Tony Dinh
2021-12-18 4:23 ` [PATCH 2/8] arm: kirkwood: Pogoplug V4 : Add board defconfig file Tony Dinh
2021-12-18 13:17 ` Pali Rohár
2021-12-18 21:41 ` Tony Dinh
2021-12-20 7:18 ` Stefan Roese
2021-12-20 21:09 ` Tony Dinh
2021-12-18 4:23 ` [PATCH 3/8] arm: kirkwood: Pogoplug-V4 : Add Kconfig files Tony Dinh
2021-12-18 4:23 ` [PATCH 4/8] arm: kirkwood: Pogoplug-V4 : Add board include configs file Tony Dinh
2021-12-18 13:12 ` Pali Rohár
2021-12-18 21:27 ` Tony Dinh
2021-12-18 4:23 ` [PATCH 5/8] arm: kirkwood: Pogoplug-V4 : Add board kwbimage file Tony Dinh
2021-12-18 4:23 ` Tony Dinh [this message]
2021-12-18 13:09 ` [PATCH 6/8] arm: kirkwood: Pogoplug-V4 : Add board implementation header Pali Rohár
2021-12-18 21:47 ` Tony Dinh
2021-12-20 7:23 ` Stefan Roese
2021-12-20 21:14 ` Tony Dinh
2021-12-18 4:23 ` [PATCH 7/8] arm: kirkwood: Pogoplug-V4 : Add board implementation Tony Dinh
2021-12-18 22:59 ` Marek Behún
2021-12-18 23:28 ` Tony Dinh
2021-12-18 23:42 ` Marek Behún
2021-12-18 4:23 ` [PATCH 8/8] arm: kirkwood: Pogoplug-V4 : Add board maintainer Tony Dinh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211218042335.5865-7-mibodhi@gmail.com \
--to=mibodhi@gmail.com \
--cc=david.c.purdy@gmail.com \
--cc=marek.behun@nic.cz \
--cc=pali@kernel.org \
--cc=sr@denx.de \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox