From: Adam Ford <aford173@gmail.com>
To: u-boot@lists.denx.de
Cc: marcel.ziswiler@toradex.com, tharvey@gateworks.com,
Adam Ford <aford173@gmail.com>, Stefano Babic <sbabic@denx.de>,
Fabio Estevam <festevam@gmail.com>,
"NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Subject: [PATCH 1/7] arch: mach-imx: imx8m: Add FlexSPI addresses for SPL booting
Date: Sat, 5 Feb 2022 10:22:33 -0600 [thread overview]
Message-ID: <20220205162240.854948-1-aford173@gmail.com> (raw)
In order to boot from FlexSPI, we need to calculate
SYS_UBOOT_BASE, and the math depends on these registers.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/include/asm/arch-imx8m/imx-regs.h b/arch/arm/include/asm/arch-imx8m/imx-regs.h
index b800da13a1..209114c810 100644
--- a/arch/arm/include/asm/arch-imx8m/imx-regs.h
+++ b/arch/arm/include/asm/arch-imx8m/imx-regs.h
@@ -48,6 +48,8 @@
#ifdef CONFIG_IMX8MM
#define USDHC3_BASE_ADDR 0x30B60000
#endif
+#define QSPI0_BASE_ADDR 0x30BB0000
+#define QSPI0_AMBA_BASE 0x08000000
#define TZASC_BASE_ADDR 0x32F80000
--
2.32.0
next reply other threads:[~2022-02-05 16:23 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-05 16:22 Adam Ford [this message]
2022-02-05 16:22 ` [PATCH 2/7] imx8m: Add FlexSPI Configuration Block Adam Ford
2022-02-06 17:55 ` Adam Ford
2022-02-05 16:22 ` [PATCH 3/7] imx8m: add image cfg for i.MX8MM FlexSPI booting Adam Ford
2022-02-05 16:22 ` [PATCH 4/7] arm: dts: imx8mm: Create generic DTSI for booting from FlexSPI Adam Ford
2022-02-05 16:22 ` [PATCH 5/7] arm: dts: imx8mm-beacon: Enhange FlexSPI/flash nodes Adam Ford
2022-02-05 16:22 ` [PATCH 6/7] arm: dts: Add imx8mm-beacon-kit-flexspi Adam Ford
2022-02-05 16:22 ` [PATCH 7/7] imx8m: Add imx8mm_beacon_fspi Adam Ford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220205162240.854948-1-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=festevam@gmail.com \
--cc=marcel.ziswiler@toradex.com \
--cc=sbabic@denx.de \
--cc=tharvey@gateworks.com \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox