[PATCH 7/7] imx8m: Add imx8mm_beacon_fspi

[Adam Ford <aford173@gmail.com>]

A special configuration is needed to build U-Boot, SPL and the
FlexSPI Configuration block.  Add a defconfig with this added
and enable SPI booting from the board file.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/board/beacon/imx8mm/MAINTAINERS b/board/beacon/imx8mm/MAINTAINERS
index e887db20a2..d28ebdad96 100644
--- a/board/beacon/imx8mm/MAINTAINERS
+++ b/board/beacon/imx8mm/MAINTAINERS
@@ -5,3 +5,10 @@ S:	Maintained
 F:	board/beacon/imx8mm/
 F:	include/configs/imx8mm_beacon.h
 F:	configs/imx8mm_beacon_defconfig
+F:	configs/imx8mm_beacon_fspi_defconfig
+F:	arch/arm/dts/imx8mm-beacon-baseboard.dtsi
+F:	arch/arm/dts/imx8mm-beacon-kit.dts
+F:	arch/arm/dts/imx8mm-beacon-kit-flexspi.dtb
+F:	arch/arm/dts/imx8mm-beacon-kit-flexspi.dts
+F:	arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi
+F:	arch/arm/dts/imx8mm-beacon-som.dtsi
diff --git a/board/beacon/imx8mm/spl.c b/board/beacon/imx8mm/spl.c
index 12266b22a4..a1485ee944 100644
--- a/board/beacon/imx8mm/spl.c
+++ b/board/beacon/imx8mm/spl.c
@@ -34,6 +34,10 @@ int spl_board_boot_device(enum boot_device boot_dev_spl)
 	case SD3_BOOT:
 	case MMC3_BOOT:
 		return BOOT_DEVICE_MMC2;
+	case QSPI_BOOT:
+		return BOOT_DEVICE_SPI;
+	case USB_BOOT:
+		return BOOT_DEVICE_BOARD;
 	default:
 		return BOOT_DEVICE_NONE;
 	}
diff --git a/configs/imx8mm_beacon_fspi_defconfig b/configs/imx8mm_beacon_fspi_defconfig
new file mode 100644
index 0000000000..f41fbe6273
--- /dev/null
+++ b/configs/imx8mm_beacon_fspi_defconfig
@@ -0,0 +1,129 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMX8M=y
+CONFIG_SYS_TEXT_BASE=0x40200000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x10000
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_ENV_SIZE=0x1000
+CONFIG_ENV_OFFSET=0x400000
+CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx8m/imximage-8mm-flexspi-lpddr4.cfg"
+CONFIG_DM_GPIO=y
+CONFIG_SPL_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="imx8mm-beacon-kit-flexspi"
+CONFIG_SPL_TEXT_BASE=0x7E2000
+CONFIG_TARGET_IMX8MM_BEACON=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_LTO=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
+CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; fi;"
+CONFIG_DEFAULT_FDT_FILE="imx8mm-beacon-kit-flexspi.dtb"
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+CONFIG_SPL_I2C=y
+CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_NOR_SUPPORT=y
+CONFIG_SPL_POWER=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x600000
+CONFIG_SPL_WATCHDOG=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="u-boot=> "
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_CLK=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=1
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_CLK_COMPOSITE_CCF=y
+CONFIG_CLK_COMPOSITE_CCF=y
+CONFIG_SPL_CLK_IMX8MM=y
+CONFIG_CLK_IMX8MM=y
+CONFIG_MXC_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_SPL_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_SPL_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_SPL_MMC_HS400_SUPPORT=y
+CONFIG_FSL_USDHC=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=10000000
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_PHY_GIGE=y
+CONFIG_FEC_MXC=y
+CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMX8M=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_BD71837=y
+CONFIG_SPL_DM_PMIC_BD71837=y
+CONFIG_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_BD71837=y
+CONFIG_SPL_DM_REGULATOR_BD71837=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_CONS_INDEX=2
+CONFIG_DM_SERIAL=y
+# CONFIG_SPL_DM_SERIAL is not set
+CONFIG_MXC_UART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_DM_THERMAL=y
+CONFIG_IMX_WATCHDOG=y
-- 
2.32.0