* [PATCH] include: configs: am65x_evm: Change to using .env
@ 2023-03-21 12:53 Nikhil M Jain
2023-03-21 15:35 ` Tom Rini
2023-03-30 1:54 ` Tom Rini
0 siblings, 2 replies; 3+ messages in thread
From: Nikhil M Jain @ 2023-03-21 12:53 UTC (permalink / raw)
To: u-boot, trini, n-francis; +Cc: vigneshr, devarsht, Nikhil M Jain
Move to using .env file for setting up environment variables for am65x.
Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
---
board/ti/am65x/am65x.env | 47 +++++++++++++++++++++++++
include/configs/am65x_evm.h | 68 -------------------------------------
2 files changed, 47 insertions(+), 68 deletions(-)
create mode 100644 board/ti/am65x/am65x.env
diff --git a/board/ti/am65x/am65x.env b/board/ti/am65x/am65x.env
new file mode 100644
index 0000000000..a048b47071
--- /dev/null
+++ b/board/ti/am65x/am65x.env
@@ -0,0 +1,47 @@
+#include <environment/ti/ti_armv7_common.env>
+#include <environment/ti/mmc.env>
+#include <environment/ti/k3_dfu.env>
+#if CONFIG_CMD_REMOTEPROC
+#include <environment/ti/k3_rproc.env>
+#endif
+
+findfdt=
+ setenv name_fdt k3-am654-base-board.dtb;
+ setenv fdtfile ${name_fdt}
+name_kern=Image
+console=ttyS2,115200n8
+args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000
+ ${mtdparts}
+run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
+
+boot=mmc
+mmcdev=1
+bootpart=1:2
+bootdir=/boot
+rd_spec=-
+init_mmc=run args_all args_mmc
+get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}
+get_overlay_mmc=
+ fdt address ${fdtaddr};
+ fdt resize 0x100000;
+ for overlay in $name_overlays;
+ do;
+ load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} &&
+ fdt apply ${dtboaddr};
+ done;
+get_kern_mmc=load mmc ${bootpart} ${loadaddr}
+ ${bootdir}/${name_kern}
+get_fit_mmc=load mmc ${bootpart} ${addr_fit}
+ ${bootdir}/${name_fit}
+partitions=name=root,start=0,size=-,uuid=${uuid_gpt_rootfs}
+
+init_ubi=
+ run args_all args_ubi;
+ sf probe;
+ ubi part ospi.rootfs;
+ ubifsmount ubi:rootfs;
+get_kern_ubi=ubifsload ${loadaddr} ${bootdir}/${name_kern}
+get_fdt_ubi=ubifsload ${fdtaddr} ${bootdir}/${name_fdt}
+args_ubi=setenv bootargs console=${console} ${optargs}
+rootfstype=ubifs root=ubi0:rootfs rw ubi.mtd=ospi.rootfs
+
diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h
index 33dd6cfdfa..c54957300a 100644
--- a/include/configs/am65x_evm.h
+++ b/include/configs/am65x_evm.h
@@ -17,66 +17,6 @@
/* DDR Configuration */
#define CFG_SYS_SDRAM_BASE1 0x880000000
-#define PARTS_DEFAULT \
- /* Linux partitions */ \
- "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0"
-
-/* U-Boot general configuration */
-#define EXTRA_ENV_AM65X_BOARD_SETTINGS \
- "findfdt=" \
- "setenv name_fdt k3-am654-base-board.dtb;" \
- "setenv fdtfile ${name_fdt}\0" \
- "name_kern=Image\0" \
- "console=ttyS2,115200n8\0" \
- "stdin=serial,usbkbd\0" \
- "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 " \
- "${mtdparts}\0" \
- "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0" \
-
-/* U-Boot MMC-specific configuration */
-#define EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC \
- "boot=mmc\0" \
- "mmcdev=1\0" \
- "bootpart=1:2\0" \
- "bootdir=/boot\0" \
- "rd_spec=-\0" \
- "init_mmc=run args_all args_mmc\0" \
- "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \
- "get_overlay_mmc=" \
- "fdt address ${fdtaddr};" \
- "fdt resize 0x100000;" \
- "for overlay in $name_overlays;" \
- "do;" \
- "load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay};" \
- "fdt apply ${dtboaddr};" \
- "done;\0" \
- "get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \
- "${bootdir}/${name_kern}\0" \
- "get_fit_mmc=load mmc ${bootpart} ${addr_fit} " \
- "${bootdir}/${name_fit}\0" \
- "partitions=" PARTS_DEFAULT
-
-#ifdef DEFAULT_RPROCS
-#undef DEFAULT_RPROCS
-#endif
-#define DEFAULT_RPROCS "" \
- "0 /lib/firmware/am65x-mcu-r5f0_0-fw " \
- "1 /lib/firmware/am65x-mcu-r5f0_1-fw "
-
-#define EXTRA_ENV_AM65X_BOARD_SETTINGS_UBI \
- "init_ubi=run args_all args_ubi; sf probe; " \
- "ubi part ospi.rootfs; ubifsmount ubi:rootfs;\0" \
- "get_kern_ubi=ubifsload ${loadaddr} ${bootdir}/${name_kern}\0" \
- "get_fdt_ubi=ubifsload ${fdtaddr} ${bootdir}/${name_fdt}\0" \
- "args_ubi=setenv bootargs console=${console} ${optargs} " \
- "rootfstype=ubifs root=ubi0:rootfs rw ubi.mtd=ospi.rootfs\0"
-
-#define EXTRA_ENV_DFUARGS \
- DFU_ALT_INFO_MMC \
- DFU_ALT_INFO_RAM \
- DFU_ALT_INFO_EMMC \
- DFU_ALT_INFO_OSPI
-
#ifdef CONFIG_TARGET_AM654_A53_EVM
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
@@ -89,14 +29,6 @@
/* Incorporate settings into the U-Boot environment */
#define CFG_EXTRA_ENV_SETTINGS \
- DEFAULT_LINUX_BOOT_ENV \
- DEFAULT_MMC_TI_ARGS \
- DEFAULT_FIT_TI_ARGS \
- EXTRA_ENV_AM65X_BOARD_SETTINGS \
- EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC \
- EXTRA_ENV_AM65X_BOARD_SETTINGS_UBI \
- EXTRA_ENV_RPROC_SETTINGS \
- EXTRA_ENV_DFUARGS \
BOOTENV
/* Now for the remaining common defines */
--
2.34.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] include: configs: am65x_evm: Change to using .env
2023-03-21 12:53 [PATCH] include: configs: am65x_evm: Change to using .env Nikhil M Jain
@ 2023-03-21 15:35 ` Tom Rini
2023-03-30 1:54 ` Tom Rini
1 sibling, 0 replies; 3+ messages in thread
From: Tom Rini @ 2023-03-21 15:35 UTC (permalink / raw)
To: Nikhil M Jain; +Cc: u-boot, n-francis, vigneshr, devarsht
[-- Attachment #1: Type: text/plain, Size: 252 bytes --]
On Tue, Mar 21, 2023 at 06:23:30PM +0530, Nikhil M Jain wrote:
> Move to using .env file for setting up environment variables for am65x.
>
> Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] include: configs: am65x_evm: Change to using .env
2023-03-21 12:53 [PATCH] include: configs: am65x_evm: Change to using .env Nikhil M Jain
2023-03-21 15:35 ` Tom Rini
@ 2023-03-30 1:54 ` Tom Rini
1 sibling, 0 replies; 3+ messages in thread
From: Tom Rini @ 2023-03-30 1:54 UTC (permalink / raw)
To: Nikhil M Jain; +Cc: u-boot, n-francis, vigneshr, devarsht
[-- Attachment #1: Type: text/plain, Size: 287 bytes --]
On Tue, Mar 21, 2023 at 06:23:30PM +0530, Nikhil M Jain wrote:
> Move to using .env file for setting up environment variables for am65x.
>
> Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
Applied to u-boot/next, thanks!
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-03-30 1:57 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-03-21 12:53 [PATCH] include: configs: am65x_evm: Change to using .env Nikhil M Jain
2023-03-21 15:35 ` Tom Rini
2023-03-30 1:54 ` Tom Rini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox