Re: [PATCH 2/6] arm: dts: k3-am64-evm: Mark dependent nodes for pre-relocation phase

[Nishanth Menon <nm@ti.com>]

On 16:46-20230929, Roger Quadros wrote:
> CPSW node needs PHY, MDIO, pinmux, DMA and INTC nodes.
> USB and MMC nodes need pinmux.
> 
> Mark them as 'bootph-all' so they are available in all
> pre-relocation phases.
> 
> Fixes below dts warning:
> 
> <stdout>: Warning (dmas_property): /bus@f4000/ethernet@8000000:dmas: Could not get phandle node for (cell 0)
> 
> Signed-off-by: Roger Quadros <rogerq@kernel.org>
> ---
>  arch/arm/dts/k3-am642-evm-u-boot.dtsi | 48 +++++++++++++++++++++++++++
>  arch/arm/dts/k3-am642-r5-evm.dts      |  8 +++++
>  2 files changed, 56 insertions(+)
> 
> diff --git a/arch/arm/dts/k3-am642-evm-u-boot.dtsi b/arch/arm/dts/k3-am642-evm-u-boot.dtsi
> index d06955dfbc..953bbe9aaf 100644
> --- a/arch/arm/dts/k3-am642-evm-u-boot.dtsi
> +++ b/arch/arm/dts/k3-am642-evm-u-boot.dtsi
> @@ -51,6 +51,10 @@
>  	bootph-all;
>  };
>  
> +&main_usb0_pins_default {
> +	bootph-all;
> +};
> +
>  &usb0 {
>  	dr_mode="peripheral";
>  	bootph-all;
> @@ -100,12 +104,56 @@
>  	bootph-all;
>  };
>  
> +&main_mmc1_pins_default {
> +	bootph-all;
> +};
> +
>  &sdhci1 {
>  	bootph-all;
>  };
>  
> +&inta_main_dmss {
> +	bootph-all;
> +};
> +
> +&main_pktdma {
> +	bootph-all;
> +};
> +
> +&mdio1_pins_default {
> +	bootph-all;
> +};
> +
> +&cpsw3g_mdio {
> +	bootph-all;
> +};
> +
> +&cpsw3g_phy0 {
> +	bootph-all;
> +};
> +
> +&rgmii1_pins_default {
> +	bootph-all;
> +};
> +
> +&rgmii2_pins_default {
> +	bootph-all;
> +};
> +
>  &cpsw3g {
>  	bootph-all;
> +
> +	ethernet-ports {
> +		bootph-all;
> +	};
> +};
> +
> +&phy_gmii_sel {
> +	bootph-all;
> +};
> +
> +&cpsw_port1 {
> +	bootph-all;
>  };
>  
>  &cpsw_port2 {
> diff --git a/arch/arm/dts/k3-am642-r5-evm.dts b/arch/arm/dts/k3-am642-r5-evm.dts
> index 696735d8e2..64b3c3af63 100644
> --- a/arch/arm/dts/k3-am642-r5-evm.dts
> +++ b/arch/arm/dts/k3-am642-r5-evm.dts
> @@ -74,6 +74,14 @@
>  	ti,secure-host;
>  };
>  
> +&vtt_supply {
> +	bootph-pre-ram;
> +};
> +
> +&memorycontroller {
> +	vtt-supply = <&vtt_supply>;
> +};
> +
>  &sdhci0 {
>  	clocks = <&clk_200mhz>;
>  	clock-names = "clk_xin";
> -- 
> 2.34.1
> 

Reviewed-by: Nishanth Menon <nm@ti.com>
-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D