public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Tom Rini <trini@konsulko.com>
To: Neha Malcom Francis <n-francis@ti.com>
Cc: nm@ti.com, "Kumar, Udit" <u-kumar1@ti.com>,
	Keerthy <j-keerthy@ti.com>,
	u-boot@lists.denx.de, vigneshr@ti.com
Subject: Re: [PATCH RFC 10/10] board: ti: j721e: Enable ESM initialization for J7200
Date: Fri, 17 Nov 2023 09:07:13 -0500	[thread overview]
Message-ID: <20231117140713.GD170968@bill-the-cat> (raw)
In-Reply-To: <4f440a06-892b-4098-9565-6b21778bb5bb@ti.com>

[-- Attachment #1: Type: text/plain, Size: 2935 bytes --]

On Fri, Nov 17, 2023 at 02:00:43PM +0530, Neha Malcom Francis wrote:
> Hi Tom
> 
> On 17/11/23 00:10, Tom Rini wrote:
> > On Thu, Nov 16, 2023 at 11:43:50AM +0530, Neha Malcom Francis wrote:
> > > Hi Tom,
> > > 
> > > Trying to bring back this series here.
> > > 
> > > On 03/10/23 20:40, Tom Rini wrote:
> > > > On Tue, Oct 03, 2023 at 07:57:04PM +0530, Kumar, Udit wrote:
> > > > > 
> > > > > On 10/3/2023 1:40 PM, Keerthy wrote:
> > > > > > Enable ESM initialization for J7200
> > > > > > 
> > > > > > Signed-off-by: Keerthy <j-keerthy@ti.com>
> > > > > > ---
> > > > > >     board/ti/j721e/evm.c | 6 ++++--
> > > > > >     1 file changed, 4 insertions(+), 2 deletions(-)
> > > > > > 
> > > > > > diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c
> > > > > > index 42fa94b7a5..070b28326f 100644
> > > > > > --- a/board/ti/j721e/evm.c
> > > > > > +++ b/board/ti/j721e/evm.c
> > > > > > @@ -543,7 +543,8 @@ void spl_board_init(void)
> > > > > >     	}
> > > > > >     #ifdef CONFIG_ESM_K3
> > > > > > -	if (board_ti_k3_is("J721EX-PM2-SOM")) {
> > > > > > +	if ((board_ti_k3_is("J721EX-PM2-SOM")) ||
> > > > > > +	    IS_ENABLED(CONFIG_TARGET_J7200_R5_EVM)) {
> > > > > 
> > > > > 
> > > > > Could we align on one kind of check,  For J721E check is done against
> > > > > board-id, whereas for J7200 checking
> > > > 
> > > > We should look at figuring out how to split this file in two.  One for
> > > > "generic J721E systems" and one for "TI EVMs", as I've mentioned in
> > > > other threads, so that it's easier for custom platforms to drop code
> > > > they don' require.
> > > > 
> > > 
> > > Yes that does make sense. Would it be okay if we solve that problem
> > > separately in a different patch series? We can move along with this current
> > > series for now (after making the required change in CONFIG/board-id for v2)
> > > since ESM support is important for these platforms.
> > 
> > Well, I think part of the answer to your question is (and this is a more
> > general TI one too), what outstanding changes need to come in now to
> > make existing platforms functional for v2024.01 ? My first thought is
> > that this series would be taken to -next, if I took it now, which means
> > there's time before it would be in master, and so if it really makes the
> > re-org later easier, we could take it, but if not, can we re-org then do
> > this? But if we need this to deal with regressions, OK, yes, we can take
> > it like this now.
> > 
> 
> Maybe focusing on the re-org after having in the changes would help give
> more perspective on how we can split? Not sure just a thought... in that
> case I prefer taking this in and having a working error signaling module in
> rather than delaying it if that's okay.

OK, please rebase on top of whatever other series are needed (and note
so in the cover letter) and mark it as non-RFC, thanks.

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]

  reply	other threads:[~2023-11-17 14:07 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-03  8:10 [PATCH RFC 00/10] arm: dts: j7200/j721s2: Enable the ESM and PMIC ESM Keerthy
2023-10-03  8:10 ` [PATCH RFC 01/10] arm64: dts: ti: k3-j721s2: Add ESM instances Keerthy
2023-10-03  8:10 ` [PATCH RFC 02/10] arm64: dts: ti: k3-j7200: Add MCU domain ESM instance Keerthy
2023-10-03  8:10 ` [PATCH RFC 03/10] arm: dts: k3-j721s2-r5-common-proc-board: Add ESM PMIC and dependent nodes Keerthy
2023-10-03  8:10 ` [PATCH RFC 04/10] arm64: dts: ti: k3-j721e: Add MCU domain ESM instance Keerthy
2023-10-03  8:10 ` [PATCH RFC 05/10] board: ti: j721e: Initialize MCU ESM Keerthy
2023-10-03  8:10 ` [PATCH RFC 06/10] board: ti: j721s2: Initialize the ESM & PMIC ESM Keerthy
2023-10-03  8:10 ` [PATCH RFC 07/10] configs: j721s2_evm_r5_defconfig: Enable ESM & PMIC ESM configs Keerthy
2023-10-03  8:10 ` [PATCH RFC 08/10] arm: dts: k3-j7200-r5-common-proc-board: Add PMIC ESM node Keerthy
2023-10-03  8:10 ` [PATCH RFC 09/10] configs: j7200_evm_r5_defconfig: Enable the ESM configs Keerthy
2023-10-03  8:10 ` [PATCH RFC 10/10] board: ti: j721e: Enable ESM initialization for J7200 Keerthy
2023-10-03 14:27   ` Kumar, Udit
2023-10-03 15:10     ` Tom Rini
2023-11-16  6:13       ` Neha Malcom Francis
2023-11-16 18:40         ` Tom Rini
2023-11-17  8:30           ` Neha Malcom Francis
2023-11-17 14:07             ` Tom Rini [this message]
2023-11-20  4:41               ` Neha Malcom Francis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231117140713.GD170968@bill-the-cat \
    --to=trini@konsulko.com \
    --cc=j-keerthy@ti.com \
    --cc=n-francis@ti.com \
    --cc=nm@ti.com \
    --cc=u-boot@lists.denx.de \
    --cc=u-kumar1@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox