[PATCH 1/3] doc: imx93_var_som: Adjust the underline length

public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed

* [PATCH 1/3] doc: imx93_var_som: Adjust the underline length
@ 2024-01-08 21:11 Fabio Estevam
  2024-01-08 21:11 ` [PATCH 2/3] imx9: Select BINMAN at SoC level Fabio Estevam
                   ` (3 more replies)
  0 siblings, 4 replies; 7+ messages in thread
From: Fabio Estevam @ 2024-01-08 21:11 UTC (permalink / raw)
  To: sbabic; +Cc: m.othacehe, peng.fan, u-boot, Fabio Estevam

From: Fabio Estevam <festevam@denx.de>

Adjust the underline length so that it matches the title length.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
 doc/board/variscite/imx93_var_som.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/doc/board/variscite/imx93_var_som.rst b/doc/board/variscite/imx93_var_som.rst
index 2225a772e375..4951afd2dad6 100644
--- a/doc/board/variscite/imx93_var_som.rst
+++ b/doc/board/variscite/imx93_var_som.rst
@@ -1,7 +1,7 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
 imx93_var_som
-=======================
+=============
 
 U-Boot for the Variscite VAR-SOM-MX93 Symphony evaluation board
 
@@ -38,7 +38,7 @@ Get the DDR firmware
    $ cp firmware-imx-8.21/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
 
 Get ahab-container.img
----------------------------------------
+----------------------
 
 .. code-block:: bash
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH 2/3] imx9: Select BINMAN at SoC level
  2024-01-08 21:11 [PATCH 1/3] doc: imx93_var_som: Adjust the underline length Fabio Estevam
@ 2024-01-08 21:11 ` Fabio Estevam
  2024-01-09  6:04   ` Peng Fan
  2024-01-08 21:11 ` [PATCH 3/3] imx8m: " Fabio Estevam
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 7+ messages in thread
From: Fabio Estevam @ 2024-01-08 21:11 UTC (permalink / raw)
  To: sbabic; +Cc: m.othacehe, peng.fan, u-boot, Fabio Estevam

From: Fabio Estevam <festevam@denx.de>

All i.MX93 targets rely on using binman to generate the U-Boot
binary.

Select it at the SoC level instead of per board.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
 arch/arm/mach-imx/imx9/Kconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/mach-imx/imx9/Kconfig b/arch/arm/mach-imx/imx9/Kconfig
index 76c4129d79e0..961d6f527ab6 100644
--- a/arch/arm/mach-imx/imx9/Kconfig
+++ b/arch/arm/mach-imx/imx9/Kconfig
@@ -12,6 +12,7 @@ config IMX9_LOW_DRIVE_MODE
 
 config IMX9
 	bool
+	select BINMAN
 	select HAS_CAAM
 	select ROM_UNIFIED_SECTIONS
 
@@ -29,12 +30,10 @@ choice
 
 config TARGET_IMX93_11X11_EVK
 	bool "imx93_11x11_evk"
-	select BINMAN
 	select IMX93
 
 config TARGET_IMX93_VAR_SOM
 	bool "imx93_var_som"
-	select BINMAN
 	select IMX93
 	select IMX9_LPDDR4X
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [PATCH 2/3] imx9: Select BINMAN at SoC level
  2024-01-08 21:11 ` [PATCH 2/3] imx9: Select BINMAN at SoC level Fabio Estevam
@ 2024-01-09  6:04   ` Peng Fan
  0 siblings, 0 replies; 7+ messages in thread
From: Peng Fan @ 2024-01-09  6:04 UTC (permalink / raw)
  To: Fabio Estevam, sbabic; +Cc: m.othacehe, peng.fan, u-boot, Fabio Estevam



On 1/9/2024 5:11 AM, Fabio Estevam wrote:
> From: Fabio Estevam<festevam@denx.de>
> 
> All i.MX93 targets rely on using binman to generate the U-Boot
> binary.
> 
> Select it at the SoC level instead of per board.
> 
> Signed-off-by: Fabio Estevam<festevam@denx.de>

Reviewed-by: Peng Fan <peng.fan@nxp.com>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH 3/3] imx8m: Select BINMAN at SoC level
  2024-01-08 21:11 [PATCH 1/3] doc: imx93_var_som: Adjust the underline length Fabio Estevam
  2024-01-08 21:11 ` [PATCH 2/3] imx9: Select BINMAN at SoC level Fabio Estevam
@ 2024-01-08 21:11 ` Fabio Estevam
  2024-01-09  6:04   ` Peng Fan
  2024-01-09  6:03 ` [PATCH 1/3] doc: imx93_var_som: Adjust the underline length Peng Fan
  2024-01-12 20:59 ` Fabio Estevam
  3 siblings, 1 reply; 7+ messages in thread
From: Fabio Estevam @ 2024-01-08 21:11 UTC (permalink / raw)
  To: sbabic; +Cc: m.othacehe, peng.fan, u-boot, Fabio Estevam

From: Fabio Estevam <festevam@denx.de>

All i.MX8M targets rely on using binman to generate the U-Boot
binary.

Select it at the SoC level instead of per board.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
 arch/arm/mach-imx/imx8m/Kconfig | 39 +--------------------------------
 1 file changed, 1 insertion(+), 38 deletions(-)

diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index 67da198956c2..b1937198402f 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -2,6 +2,7 @@ if ARCH_IMX8M
 
 config IMX8M
 	bool
+	select BINMAN
 	select GICV3 if ARMV8_PSCI
 	select HAS_CAAM
 	select ROM_UNIFIED_SECTIONS
@@ -41,13 +42,11 @@ choice
 
 config TARGET_IMX8MQ_CM
 	bool "Ronetix iMX8MQ-CM SoM"
-		select BINMAN
 	select IMX8MQ
 	select IMX8M_LPDDR4
 
 config TARGET_IMX8MQ_EVK
 	bool "imx8mq_evk"
-	select BINMAN
 	select IMX8MQ
 	select IMX8M_LPDDR4
 	select FSL_CAAM
@@ -56,26 +55,22 @@ config TARGET_IMX8MQ_EVK
 
 config TARGET_IMX8MQ_PHANBELL
 	bool "imx8mq_phanbell"
-	select BINMAN
 	select IMX8MQ
 	select IMX8M_LPDDR4
 
 config TARGET_IMX8MQ_REFORM2
 	bool "imx8mq_reform2"
-	select BINMAN
 	select IMX8MQ
 	select IMX8M_LPDDR4
 
 config TARGET_IMX8MM_DATA_MODUL_EDM_SBC
 	bool "Data Modul eDM SBC i.MX8M Mini"
-	select BINMAN
 	select IMX8MM
 	select IMX8M_LPDDR4
 	select SUPPORT_SPL
 
 config TARGET_IMX8MM_EVK
 	bool "imx8mm LPDDR4 EVK board"
-	select BINMAN
 	select IMX8MM
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
@@ -85,7 +80,6 @@ config TARGET_IMX8MM_EVK
 
 config TARGET_IMX8MM_ICORE_MX8MM
 	bool "Engicam i.Core MX8M Mini SOM"
-	select BINMAN
 	select IMX8MM
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
@@ -104,21 +98,18 @@ config TARGET_IMX8MM_ICORE_MX8MM
 
 config TARGET_IMX8MM_MX8MENLO
 	bool "Support i.MX8M Mini MX8Menlo board based on Toradex Verdin SoM"
-	select BINMAN
 	select IMX8MM
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
 
 config TARGET_IMX8MM_PHG
 	bool "i.MX8MM PHG board"
-	select BINMAN
 	select IMX8MM
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
 
 config TARGET_IMX8MM_VENICE
 	bool "Support Gateworks Venice iMX8M Mini module"
-	select BINMAN
 	select IMX8MM
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
@@ -130,7 +121,6 @@ config TARGET_IMX8MM_VENICE
 
 config TARGET_KONTRON_MX8MM
 	bool "Kontron Electronics N80xx"
-	select BINMAN
 	select IMX8MM
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
@@ -140,21 +130,18 @@ config TARGET_KONTRON_MX8MM
 
 config TARGET_IMX8MN_BSH_SMM_S2
 	bool "imx8mn-bsh-smm-s2"
-	select BINMAN
 	select IMX8MN
 	select SUPPORT_SPL
 	select IMX8M_DDR3L
 
 config TARGET_IMX8MN_BSH_SMM_S2PRO
 	bool "imx8mn-bsh-smm-s2pro"
-	select BINMAN
 	select IMX8MN
 	select SUPPORT_SPL
 	select IMX8M_DDR3L
 
 config TARGET_IMX8MN_EVK
 	bool "imx8mn LPDDR4 EVK board"
-	select BINMAN
 	select IMX8MN
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
@@ -163,7 +150,6 @@ config TARGET_IMX8MN_EVK
 
 config TARGET_IMX8MN_DDR4_EVK
 	bool "imx8mn DDR4 EVK board"
-	select BINMAN
 	select IMX8MN
 	select SUPPORT_SPL
 	select IMX8M_DDR4
@@ -172,7 +158,6 @@ config TARGET_IMX8MN_DDR4_EVK
 
 config TARGET_IMX8MN_VENICE
 	bool "Support Gateworks Venice iMX8M Nano module"
-	select BINMAN
 	select IMX8MN
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
@@ -184,14 +169,12 @@ config TARGET_IMX8MN_VENICE
 
 config TARGET_IMX8MP_DATA_MODUL_EDM_SBC
 	bool "Data Modul eDM SBC i.MX8M Plus"
-	select BINMAN
 	select IMX8MP
 	select IMX8M_LPDDR4
 	select SUPPORT_SPL
 
 config TARGET_IMX8MP_BEACON
 	bool "imx8mm Beacon Embedded devkit"
-	select BINMAN
 	select IMX8MP
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
@@ -201,21 +184,18 @@ config TARGET_IMX8MP_BEACON
 
 config TARGET_IMX8MP_DEBIX_MODEL_A
 	bool "Polyhex i.MX8M Plus Debix Model A SBC"
-	select BINMAN
 	select IMX8MP
 	select IMX8M_LPDDR4
 	select SUPPORT_SPL
 
 config TARGET_IMX8MP_DH_DHCOM_PDK2
 	bool "DH electronics DHCOM Premium Developer Kit (2) i.MX8M Plus"
-	select BINMAN
 	select IMX8MP
 	select IMX8M_LPDDR4
 	select SUPPORT_SPL
 
 config TARGET_IMX8MP_ICORE_MX8MP
 	bool "Engicam i.Core MX8M Plus SOM"
-	select BINMAN
 	select IMX8MP
 	select IMX8M_LPDDR4
 	select SUPPORT_SPL
@@ -229,7 +209,6 @@ config TARGET_IMX8MP_ICORE_MX8MP
 
 config TARGET_IMX8MP_EVK
 	bool "imx8mp LPDDR4 EVK board"
-	select BINMAN
 	select IMX8MP
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
@@ -239,7 +218,6 @@ config TARGET_IMX8MP_EVK
 
 config TARGET_IMX8MP_VENICE
 	bool "Support Gateworks Venice iMX8M Plus module"
-	select BINMAN
 	select IMX8MP
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
@@ -251,13 +229,11 @@ config TARGET_IMX8MP_VENICE
 
 config TARGET_PICO_IMX8MQ
 	bool "Support Technexion Pico iMX8MQ"
-	select BINMAN
 	select IMX8MQ
 	select IMX8M_LPDDR4
 
 config TARGET_IMX8MN_VAR_SOM
 	bool "Variscite imx8mn_var_som"
-	select BINMAN
 	select IMX8MN
 	select SUPPORT_SPL
 	select IMX8M_DDR4
@@ -268,27 +244,23 @@ config TARGET_IMX8MN_VAR_SOM
 
 config TARGET_KONTRON_PITX_IMX8M
 	bool "Support Kontron pITX-imx8m"
-	select BINMAN
 	select IMX8MQ
 	select IMX8M_LPDDR4
 
 config TARGET_VERDIN_IMX8MM
 	bool "Support Toradex Verdin iMX8M Mini module"
-	select BINMAN
 	select IMX8MM
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
 
 config TARGET_VERDIN_IMX8MP
 	bool "Support Toradex Verdin iMX8M Plus module"
-	select BINMAN
 	select IMX8MP
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
 
 config TARGET_IMX8MM_BEACON
 	bool "imx8mm Beacon Embedded devkit"
-	select BINMAN
 	select IMX8MM
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
@@ -298,7 +270,6 @@ config TARGET_IMX8MM_BEACON
 
 config TARGET_IMX8MN_BEACON
 	bool "imx8mn Beacon Embedded devkit"
-	select BINMAN
 	select IMX8MN
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
@@ -308,21 +279,18 @@ config TARGET_IMX8MN_BEACON
 
 config TARGET_PHYCORE_IMX8MM
 	bool "PHYTEC PHYCORE i.MX8MM"
-	select BINMAN
 	select IMX8MM
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
 
 config TARGET_PHYCORE_IMX8MP
 	bool "PHYTEC PHYCORE i.MX8MP"
-	select BINMAN
 	select IMX8MP
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
 
 config TARGET_IMX8MM_CL_IOT_GATE
 	bool "CompuLab iot-gate-imx8"
-	select BINMAN
 	select IMX8MM
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
@@ -330,7 +298,6 @@ config TARGET_IMX8MM_CL_IOT_GATE
 
 config TARGET_IMX8MM_CL_IOT_GATE_OPTEE
 	bool "CompuLab iot-gate-imx8 with optee support"
-	select BINMAN
 	select IMX8MM
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
@@ -338,28 +305,24 @@ config TARGET_IMX8MM_CL_IOT_GATE_OPTEE
 
 config TARGET_IMX8MP_RSB3720A1_4G
 	bool "Support i.MX8MP RSB3720A1 4G"
-	select BINMAN
 	select IMX8MP
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
 
 config TARGET_IMX8MP_RSB3720A1_6G
 	bool "Support i.MX8MP RSB3720A1 6G"
-	select BINMAN
 	select IMX8MP
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
 
 config TARGET_MSC_SM2S_IMX8MP
 	bool "MSC SMARC2 i.MX8MPLUS"
-	select BINMAN
 	select IMX8MP
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
 
 config TARGET_LIBREM5
 	bool "Purism Librem5 Phone"
-	select BINMAN
 	select IMX8MQ
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [PATCH 3/3] imx8m: Select BINMAN at SoC level
  2024-01-08 21:11 ` [PATCH 3/3] imx8m: " Fabio Estevam
@ 2024-01-09  6:04   ` Peng Fan
  0 siblings, 0 replies; 7+ messages in thread
From: Peng Fan @ 2024-01-09  6:04 UTC (permalink / raw)
  To: Fabio Estevam, sbabic; +Cc: m.othacehe, peng.fan, u-boot, Fabio Estevam



On 1/9/2024 5:11 AM, Fabio Estevam wrote:
> From: Fabio Estevam<festevam@denx.de>
> 
> All i.MX8M targets rely on using binman to generate the U-Boot
> binary.
> 
> Select it at the SoC level instead of per board.
> 
> Signed-off-by: Fabio Estevam<festevam@denx.de>

Reviewed-by: Peng Fan <peng.fan@nxp.com>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH 1/3] doc: imx93_var_som: Adjust the underline length
  2024-01-08 21:11 [PATCH 1/3] doc: imx93_var_som: Adjust the underline length Fabio Estevam
  2024-01-08 21:11 ` [PATCH 2/3] imx9: Select BINMAN at SoC level Fabio Estevam
  2024-01-08 21:11 ` [PATCH 3/3] imx8m: " Fabio Estevam
@ 2024-01-09  6:03 ` Peng Fan
  2024-01-12 20:59 ` Fabio Estevam
  3 siblings, 0 replies; 7+ messages in thread
From: Peng Fan @ 2024-01-09  6:03 UTC (permalink / raw)
  To: Fabio Estevam, sbabic; +Cc: m.othacehe, peng.fan, u-boot, Fabio Estevam


On 1/9/2024 5:11 AM, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> Adjust the underline length so that it matches the title length.
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>

Reviewed-by: Peng Fan <peng.fan@nxp.com>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH 1/3] doc: imx93_var_som: Adjust the underline length
  2024-01-08 21:11 [PATCH 1/3] doc: imx93_var_som: Adjust the underline length Fabio Estevam
                   ` (2 preceding siblings ...)
  2024-01-09  6:03 ` [PATCH 1/3] doc: imx93_var_som: Adjust the underline length Peng Fan
@ 2024-01-12 20:59 ` Fabio Estevam
  3 siblings, 0 replies; 7+ messages in thread
From: Fabio Estevam @ 2024-01-12 20:59 UTC (permalink / raw)
  To: sbabic; +Cc: m.othacehe, peng.fan, u-boot, Fabio Estevam

On Mon, Jan 8, 2024 at 6:11 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> From: Fabio Estevam <festevam@denx.de>
>
> Adjust the underline length so that it matches the title length.
>
> Signed-off-by: Fabio Estevam <festevam@denx.de>

Applied all, thanks.

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2024-01-12 20:59 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-01-08 21:11 [PATCH 1/3] doc: imx93_var_som: Adjust the underline length Fabio Estevam
2024-01-08 21:11 ` [PATCH 2/3] imx9: Select BINMAN at SoC level Fabio Estevam
2024-01-09  6:04   ` Peng Fan
2024-01-08 21:11 ` [PATCH 3/3] imx8m: " Fabio Estevam
2024-01-09  6:04   ` Peng Fan
2024-01-09  6:03 ` [PATCH 1/3] doc: imx93_var_som: Adjust the underline length Peng Fan
2024-01-12 20:59 ` Fabio Estevam

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox