[PATCH 0/6] Move DRAM address of ATF

[Andrew Davis <afd@ti.com>]

Hello all,

Explanation for this series is mostly in [4/6]. First 3
patches should be safe to take independent of the last 3.

Thanks,
Andrew

Andrew Davis (6):
  arm: mach-k3: Add default ATF location for AM62/AM62a
  arm: mach-k3: Add config option for setting OP-TEE address
  arm: mach-k3: am62: Enable OF_SYSTEM_SETUP for all boards
  arm: mach-k3: am62: Fixup TF-A/OP-TEE reserved-memory node in FDT
  arm: mach-k3: am62a: Fixup TF-A/OP-TEE reserved-memory node in FDT
  arm: mach-k3: Move DRAM address of ATF for AM62/AM62a

 arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi  |  4 +-
 arch/arm/dts/k3-am65-iot2050-boot-image.dtsi  |  4 +-
 arch/arm/dts/k3-binman.dtsi                   |  8 +--
 .../dts/k3-j721e-beagleboneai64-u-boot.dtsi   |  4 +-
 arch/arm/mach-k3/Kconfig                      | 10 +++-
 arch/arm/mach-k3/Makefile                     |  1 +
 arch/arm/mach-k3/am625_fdt.c                  |  2 +
 arch/arm/mach-k3/am62a7_fdt.c                 | 16 ++++++
 arch/arm/mach-k3/am62ax/Kconfig               |  1 +
 arch/arm/mach-k3/am62x/Kconfig                |  3 ++
 arch/arm/mach-k3/common_fdt.c                 | 52 +++++++++++++++++++
 arch/arm/mach-k3/common_fdt.h                 |  2 +
 configs/am62ax_evm_a53_defconfig              |  1 -
 configs/am62x_beagleplay_a53_defconfig        |  1 -
 configs/am62x_evm_a53_defconfig               |  1 -
 configs/phycore_am62x_a53_defconfig           |  1 -
 configs/verdin-am62_a53_defconfig             |  2 -
 17 files changed, 96 insertions(+), 17 deletions(-)
 create mode 100644 arch/arm/mach-k3/am62a7_fdt.c

-- 
2.39.2