[PATCH 2/6] arm: mach-k3: Add config option for setting OP-TEE address

[Andrew Davis <afd@ti.com>]

Much like we have for ATF, OP-TEE has a standard address that we load
it too and run it from. Add a Kconfig item for this to remove some
hard-coding and allow this address to be more easily changed.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi     | 4 ++--
 arch/arm/dts/k3-am65-iot2050-boot-image.dtsi     | 4 ++--
 arch/arm/dts/k3-binman.dtsi                      | 8 ++++----
 arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi | 4 ++--
 arch/arm/mach-k3/Kconfig                         | 7 +++++++
 5 files changed, 17 insertions(+), 10 deletions(-)

diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
index a723caa5805..cca0f44b7d8 100644
--- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
@@ -105,8 +105,8 @@
 					arch = "arm64";
 					compression = "none";
 					os = "tee";
-					load = <0x9e800000>;
-					entry = <0x9e800000>;
+					load = <CONFIG_K3_OPTEE_LOAD_ADDR>;
+					entry = <CONFIG_K3_OPTEE_LOAD_ADDR>;
 					tee-os {
 						filename = "tee-raw.bin";
 					};
diff --git a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
index 64318d09cf0..3a6db91e132 100644
--- a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
+++ b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
@@ -51,8 +51,8 @@
 					arch = "arm64";
 					compression = "none";
 					os = "tee";
-					load = <0x9e800000>;
-					entry = <0x9e800000>;
+					load = <CONFIG_K3_OPTEE_LOAD_ADDR>;
+					entry = <CONFIG_K3_OPTEE_LOAD_ADDR>;
 					tee-os {
 					};
 				};
diff --git a/arch/arm/dts/k3-binman.dtsi b/arch/arm/dts/k3-binman.dtsi
index 758c8bf6ea1..621653e9471 100644
--- a/arch/arm/dts/k3-binman.dtsi
+++ b/arch/arm/dts/k3-binman.dtsi
@@ -286,8 +286,8 @@
 					arch = "arm64";
 					compression = "none";
 					os = "tee";
-					load = <0x9e800000>;
-					entry = <0x9e800000>;
+					load = <CONFIG_K3_OPTEE_LOAD_ADDR>;
+					entry = <CONFIG_K3_OPTEE_LOAD_ADDR>;
 					ti-secure {
 						content = <&tee>;
 						keyfile = "custMpk.pem";
@@ -356,8 +356,8 @@
 					arch = "arm64";
 					compression = "none";
 					os = "tee";
-					load = <0x9e800000>;
-					entry = <0x9e800000>;
+					load = <CONFIG_K3_OPTEE_LOAD_ADDR>;
+					entry = <CONFIG_K3_OPTEE_LOAD_ADDR>;
 					tee-os {
 						filename = "tee-raw.bin";
 					};
diff --git a/arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi b/arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi
index 017a5a722e0..ca99fa0e690 100644
--- a/arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi
+++ b/arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi
@@ -250,8 +250,8 @@
 					arch = "arm64";
 					compression = "none";
 					os = "tee";
-					load = <0x9e800000>;
-					entry = <0x9e800000>;
+					load = <CONFIG_K3_OPTEE_LOAD_ADDR>;
+					entry = <CONFIG_K3_OPTEE_LOAD_ADDR>;
 					tee-os {
 						filename = "tee-raw.bin";
 					};
diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index 0bd3f9fa12d..55bb874d9aa 100644
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -129,6 +129,13 @@ config K3_ATF_LOAD_ADDR
 	  The load address for the ATF image. This value is used to build the
 	  FIT image header that places ATF in memory where it will run.
 
+config K3_OPTEE_LOAD_ADDR
+	hex "Load address of OPTEE image"
+	default 0x9e800000
+	help
+	  The load address for the OPTEE image. This value defaults to 0x9e800000
+	  if not provided in the board defconfig file.
+
 config K3_DM_FW
 	bool "Separate DM firmware image"
 	depends on CPU_V7R && (SOC_K3_J721E || SOC_K3_J721S2 || SOC_K3_AM625 || SOC_K3_AM62A7) && !CLK_TI_SCI && !TI_SCI_POWER_DOMAIN
-- 
2.39.2