[PATCH] imx9: Update to mx93 A1 chip revision.

[PATCH] imx9: Update to mx93 A1 chip revision.

[Mathieu Othacehe]

Use the latest, mx93a1-ahab-container.img that is compatible with the
i.MX93 A1 revision.

Using mx93a1-ahab-container.img on an A0 chip and conversely causes a boot
failure without any traces on the UART.

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
---
 arch/arm/mach-imx/imx9/imximage.cfg       | 2 +-
 doc/board/nxp/imx93_11x11_evk.rst         | 8 ++++----
 doc/board/phytec/imx93-phyboard-segin.rst | 8 ++++----
 doc/board/variscite/imx93_var_som.rst     | 8 ++++----
 4 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-imx/imx9/imximage.cfg b/arch/arm/mach-imx/imx9/imximage.cfg
index 3e440465b23..d327d6a6ef4 100644
--- a/arch/arm/mach-imx/imx9/imximage.cfg
+++ b/arch/arm/mach-imx/imx9/imximage.cfg
@@ -5,6 +5,6 @@
 
 BOOT_FROM SD 0x400
 SOC_TYPE IMX9
-APPEND mx93a0-ahab-container.img
+APPEND mx93a1-ahab-container.img
 CONTAINER
 IMAGE A55 u-boot-spl-ddr.bin 0x2049A000
\ No newline at end of file
diff --git a/doc/board/nxp/imx93_11x11_evk.rst b/doc/board/nxp/imx93_11x11_evk.rst
index fb0ecf8af58..171645ad06c 100644
--- a/doc/board/nxp/imx93_11x11_evk.rst
+++ b/doc/board/nxp/imx93_11x11_evk.rst
@@ -42,10 +42,10 @@ Get ahab-container.img
 
 .. code-block:: bash
 
-   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.10.bin
-   $ chmod +x firmware-sentinel-0.10.bin
-   $ ./firmware-sentinel-0.10.bin
-   $ cp firmware-sentinel-0.10/mx93a0-ahab-container.img $(srctree)
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.11.bin
+   $ chmod +x firmware-sentinel-0.11.bin
+   $ ./firmware-sentinel-0.11.bin
+   $ cp firmware-sentinel-0.11/mx93a1-ahab-container.img $(srctree)
 
 Build U-Boot
 ------------
diff --git a/doc/board/phytec/imx93-phyboard-segin.rst b/doc/board/phytec/imx93-phyboard-segin.rst
index da8772ecd5c..ce17fbec78d 100644
--- a/doc/board/phytec/imx93-phyboard-segin.rst
+++ b/doc/board/phytec/imx93-phyboard-segin.rst
@@ -41,10 +41,10 @@ Get ahab-container.img
 
 .. code-block:: bash
 
-   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.10.bin
-   $ chmod +x firmware-sentinel-0.10.bin
-   $ ./firmware-sentinel-0.10.bin
-   $ cp firmware-sentinel-0.10/mx93a0-ahab-container.img $(srctree)
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.11.bin
+   $ chmod +x firmware-sentinel-0.11.bin
+   $ ./firmware-sentinel-0.11.bin
+   $ cp firmware-sentinel-0.11/mx93a1-ahab-container.img $(srctree)
 
 Build U-Boot
 ------------
diff --git a/doc/board/variscite/imx93_var_som.rst b/doc/board/variscite/imx93_var_som.rst
index 4951afd2dad..02309f2ad87 100644
--- a/doc/board/variscite/imx93_var_som.rst
+++ b/doc/board/variscite/imx93_var_som.rst
@@ -42,10 +42,10 @@ Get ahab-container.img
 
 .. code-block:: bash
 
-   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.10.bin
-   $ chmod +x firmware-sentinel-0.10.bin
-   $ ./firmware-sentinel-0.10.bin
-   $ cp firmware-sentinel-0.10/mx93a0-ahab-container.img $(srctree)
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.11.bin
+   $ chmod +x firmware-sentinel-0.11.bin
+   $ ./firmware-sentinel-0.11.bin
+   $ cp firmware-sentinel-0.11/mx93a1-ahab-container.img $(srctree)
 
 Build U-Boot
 ------------
-- 
2.41.0

Re: [PATCH] imx9: Update to mx93 A1 chip revision.

[Fabio Estevam]

On Mon, Feb 26, 2024 at 2:48 PM Mathieu Othacehe <othacehe@gnu.org> wrote:
>
> Use the latest, mx93a1-ahab-container.img that is compatible with the
> i.MX93 A1 revision.
>
> Using mx93a1-ahab-container.img on an A0 chip and conversely causes a boot
> failure without any traces on the UART.
>
> Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>

Applied, thanks.