[PATCH 0/6] bootstd: Add Android support

[Mattijs Korpershoek <mkorpershoek@baylibre.com>]

Android boot flow is a bit different than a regular Linux distro.
Android relies on multiple partitions in order to boot.

A typical boot flow would be:
1. Parse the Bootloader Control Block (BCB, misc partition)
2. If BCB requested bootonce-bootloader, start fastboot and wait.
3. If BCB requested recovery or normal android, run the following:
   a. Get slot (A/B) from BCB
   b. Run AVB (Android Verified Boot) on boot partitions
   c. Load boot and vendor_boot partitions
   d. Load device-tree, ramdisk and boot

The AOSP documentation has more details at [1], [2], [3]

This has been implemented via complex boot scripts such as [4].
However, these boot script are neither very maintainable nor generic.
Moreover, DISTRO_DEFAULTS is being deprecated [5].

Add a generic Android bootflow implementation for bootstd.

For this initial version, only boot image v4 is supported.

This has been tested on sandbox using:
$ ./test/py/test.py --bd sandbox --build -k test_ut

This has also been tested on the AM62X SK EVM using TI's Android SDK[6]
To test on TI board, the following (WIP) patch is needed as well:
https://gitlab.baylibre.com/baylibre/ti/ti-u-boot/-/commit/84cceb912bccd7cdd7f9dd69bca0e5d987a1fd04

[1] https://source.android.com/docs/core/architecture/bootloader
[2] https://source.android.com/docs/core/architecture/partitions
[3] https://source.android.com/docs/core/architecture/partitions/generic-boot
[4] https://source.denx.de/u-boot/u-boot/-/blob/master/include/configs/meson64_android.h
[5] https://lore.kernel.org/r/all/20230914165615.1058529-17-sjg@chromium.org/
[6] https://software-dl.ti.com/processor-sdk-android/esd/AM62X/09_02_00/docs/android/Overview.html

Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
---
Mattijs Korpershoek (6):
      boot: android: Provide vendor_bootimg_addr in boot_get_fdt()
      boot: android: Add image_android_get_version()
      bootstd: Add bootflow_iter_check_mmc() helper
      android: boot: Add set_abootimg_addr() and set_avendor_bootimg_addr()
      bootstd: Add a bootmeth for Android
      bootstd: Add test for bootmeth_android

 MAINTAINERS               |   7 +
 arch/sandbox/dts/test.dts |   8 +
 boot/Kconfig              |  14 ++
 boot/Makefile             |   2 +
 boot/bootflow.c           |  12 ++
 boot/bootmeth_android.c   | 522 ++++++++++++++++++++++++++++++++++++++++++++++
 boot/bootmeth_android.h   |  27 +++
 boot/image-android.c      |   7 +-
 boot/image-fdt.c          |   2 +-
 cmd/abootimg.c            |  10 +
 configs/sandbox_defconfig |   2 +-
 doc/develop/bootstd.rst   |   6 +
 include/bootflow.h        |   9 +
 include/image.h           |  21 ++
 test/boot/bootflow.c      |  65 +++++-
 test/py/tests/test_ut.py  |  76 +++++++
 16 files changed, 784 insertions(+), 6 deletions(-)
---
base-commit: 227be29df37545f74243a98c12a4a33c4160e3cd
change-id: 20240605-bootmeth-android-bfc8596e9367

Best regards,
-- 
Mattijs Korpershoek <mkorpershoek@baylibre.com>