* [PATCH v5 1/8] usb: cdns3: Set USB PHY mode in cdns3_drd_update_mode()
2024-10-12 3:13 [PATCH v5 0/8] Add Starfive JH7110 Cadence USB driver Minda Chen
@ 2024-10-12 3:13 ` Minda Chen
2024-10-12 3:13 ` [PATCH v5 2/8] phy: starfive: Add Starfive JH7110 USB 2.0 PHY driver Minda Chen
` (7 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Minda Chen @ 2024-10-12 3:13 UTC (permalink / raw)
To: Marek Vasut, Tom Rini, Roger Quadros, Rick Chen, Leo,
Neil Armstrong, Alexey Romanov, Sumit Garg, Mark Kettenis,
Nishanth Menon
Cc: u-boot, Heinrich Schuchardt, Simon Glass, E Shattow, Minda Chen
USB PHY maybe need to set PHY mode in different USB
dr mode. So translate USB PHY mode to generic PHY mode
and call generic_phy_set_mode().
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Marek Vasut <marex@denx.de>
---
drivers/usb/cdns3/drd.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c
index 47874fec29e..cbb13342343 100644
--- a/drivers/usb/cdns3/drd.c
+++ b/drivers/usb/cdns3/drd.c
@@ -217,15 +217,19 @@ static int cdns3_init_otg_mode(struct cdns3 *cdns)
int cdns3_drd_update_mode(struct cdns3 *cdns)
{
int ret = 0;
+ int mode;
switch (cdns->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
+ mode = PHY_MODE_USB_DEVICE;
ret = cdns3_set_mode(cdns, USB_DR_MODE_PERIPHERAL);
break;
case USB_DR_MODE_HOST:
+ mode = PHY_MODE_USB_HOST;
ret = cdns3_set_mode(cdns, USB_DR_MODE_HOST);
break;
case USB_DR_MODE_OTG:
+ mode = PHY_MODE_USB_OTG;
ret = cdns3_init_otg_mode(cdns);
break;
default:
@@ -234,6 +238,16 @@ int cdns3_drd_update_mode(struct cdns3 *cdns)
return -EINVAL;
}
+ ret = generic_phy_set_mode(&cdns->usb2_phy, mode, 0);
+ if (ret) {
+ dev_err(cdns->dev, "Set usb 2.0 PHY mode failed %d\n", ret);
+ return ret;
+ }
+
+ ret = generic_phy_set_mode(&cdns->usb3_phy, mode, 0);
+ if (ret)
+ dev_err(cdns->dev, "Set usb 3.0 PHY mode failed %d\n", ret);
+
return ret;
}
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v5 2/8] phy: starfive: Add Starfive JH7110 USB 2.0 PHY driver
2024-10-12 3:13 [PATCH v5 0/8] Add Starfive JH7110 Cadence USB driver Minda Chen
2024-10-12 3:13 ` [PATCH v5 1/8] usb: cdns3: Set USB PHY mode in cdns3_drd_update_mode() Minda Chen
@ 2024-10-12 3:13 ` Minda Chen
2024-10-12 3:13 ` [PATCH v5 3/8] phy: starfive: Add Starfive JH7110 PCIe " Minda Chen
` (6 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Minda Chen @ 2024-10-12 3:13 UTC (permalink / raw)
To: Marek Vasut, Tom Rini, Roger Quadros, Rick Chen, Leo,
Neil Armstrong, Alexey Romanov, Sumit Garg, Mark Kettenis,
Nishanth Menon
Cc: u-boot, Heinrich Schuchardt, Simon Glass, E Shattow, Minda Chen
Add Starfive JH7110 USB 2.0 PHY driver, which is generic
PHY driver.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
---
drivers/phy/Kconfig | 1 +
drivers/phy/Makefile | 1 +
drivers/phy/starfive/Kconfig | 14 ++
drivers/phy/starfive/Makefile | 6 +
drivers/phy/starfive/phy-jh7110-usb-syscon.h | 9 ++
drivers/phy/starfive/phy-jh7110-usb2.c | 162 +++++++++++++++++++
6 files changed, 193 insertions(+)
create mode 100644 drivers/phy/starfive/Kconfig
create mode 100644 drivers/phy/starfive/Makefile
create mode 100644 drivers/phy/starfive/phy-jh7110-usb-syscon.h
create mode 100644 drivers/phy/starfive/phy-jh7110-usb2.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index e12347e8a03..f940648fe58 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -309,5 +309,6 @@ source "drivers/phy/cadence/Kconfig"
source "drivers/phy/ti/Kconfig"
source "drivers/phy/qcom/Kconfig"
source "drivers/phy/renesas/Kconfig"
+source "drivers/phy/starfive/Kconfig"
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 7a2b764492b..6ac867350cb 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -44,3 +44,4 @@ obj-y += cadence/
obj-y += ti/
obj-y += qcom/
obj-y += renesas/
+obj-y += starfive/
diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig
new file mode 100644
index 00000000000..a7cf0a55dff
--- /dev/null
+++ b/drivers/phy/starfive/Kconfig
@@ -0,0 +1,14 @@
+#
+# PHY drivers for Starfive platforms
+#
+
+menu "Starfive PHY driver"
+
+config PHY_STARFIVE_JH7110_USB2
+ bool "Starfive JH7110 USB 2.0 PHY driver"
+ depends on PHY
+ help
+ Enable this to support the Starfive JH7110 USB 2.0 PHY.
+ Generic PHY driver JH7110 USB 2.0.
+
+endmenu
diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile
new file mode 100644
index 00000000000..a405a75e34c
--- /dev/null
+++ b/drivers/phy/starfive/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2023 Starfive
+#
+
+obj-$(CONFIG_PHY_STARFIVE_JH7110_USB2) += phy-jh7110-usb2.o
diff --git a/drivers/phy/starfive/phy-jh7110-usb-syscon.h b/drivers/phy/starfive/phy-jh7110-usb-syscon.h
new file mode 100644
index 00000000000..0eb66f0d859
--- /dev/null
+++ b/drivers/phy/starfive/phy-jh7110-usb-syscon.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef PHY_JH7110_USB_SYSCON_H_
+#define PHY_JH7110_USB_SYSCON_H_
+
+#define SYSCON_USB_PDRSTN_REG_OFFSET 0x18
+#define USB_PDRSTN_SPLIT_BIT 17
+
+#endif
diff --git a/drivers/phy/starfive/phy-jh7110-usb2.c b/drivers/phy/starfive/phy-jh7110-usb2.c
new file mode 100644
index 00000000000..1a28381e0df
--- /dev/null
+++ b/drivers/phy/starfive/phy-jh7110-usb2.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * StarFive JH7110 USB 2.0 PHY driver
+ *
+ * Copyright (C) 2024 StarFive Technology Co., Ltd.
+ * Author: Minda Chen <minda.chen@starfivetech.com>
+ */
+
+#include <asm/io.h>
+#include <clk.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <errno.h>
+#include <generic-phy.h>
+#include <regmap.h>
+#include <soc.h>
+#include <syscon.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+
+#include "phy-jh7110-usb-syscon.h"
+
+#define USB_LS_KEEPALIVE_OFF 0x4
+#define USB_LS_KEEPALIVE_ENABLE BIT(4)
+#define USB_PHY_CLK_RATE 125000000
+
+struct jh7110_usb2_phy {
+ struct phy *phy;
+ struct regmap *sys_syscon;
+ void __iomem *regs;
+ struct clk *usb_125m_clk;
+ struct clk *app_125m;
+ struct regmap_field *usb_split;
+ enum phy_mode mode;
+};
+
+static void usb2_set_ls_keepalive(struct jh7110_usb2_phy *phy, bool set)
+{
+ /* Host mode enable the LS speed keep-alive signal */
+ clrsetbits_le32(phy->regs + USB_LS_KEEPALIVE_OFF,
+ USB_LS_KEEPALIVE_ENABLE,
+ set ? USB_LS_KEEPALIVE_ENABLE : 0);
+}
+
+static int usb2_phy_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
+{
+ struct udevice *dev = phy->dev;
+ struct jh7110_usb2_phy *usb2_phy = dev_get_priv(dev);
+
+ if (mode == usb2_phy->mode)
+ return 0;
+
+ switch (mode) {
+ case PHY_MODE_USB_HOST:
+ case PHY_MODE_USB_DEVICE:
+ case PHY_MODE_USB_OTG:
+ dev_dbg(dev, "Changing PHY to %d\n", mode);
+ usb2_phy->mode = mode;
+ usb2_set_ls_keepalive(usb2_phy, (mode != PHY_MODE_USB_DEVICE));
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* set default split usb 2.0 only mode */
+ regmap_field_write(usb2_phy->usb_split, true);
+
+ return 0;
+}
+
+static int jh7110_usb2_phy_init(struct phy *phy)
+{
+ struct udevice *dev = phy->dev;
+ struct jh7110_usb2_phy *usb2_phy = dev_get_priv(dev);
+ int ret;
+
+ ret = clk_set_rate(usb2_phy->usb_125m_clk, USB_PHY_CLK_RATE);
+ if (ret < 0) {
+ dev_err(dev, "Failed to set 125m clock\n");
+ return ret;
+ }
+
+ return clk_prepare_enable(usb2_phy->app_125m);
+}
+
+static int jh7110_usb2_phy_exit(struct phy *phy)
+{
+ struct udevice *dev = phy->dev;
+ struct jh7110_usb2_phy *usb2_phy = dev_get_priv(dev);
+
+ clk_disable_unprepare(usb2_phy->app_125m);
+
+ return 0;
+}
+
+struct phy_ops jh7110_usb2_phy_ops = {
+ .init = jh7110_usb2_phy_init,
+ .exit = jh7110_usb2_phy_exit,
+ .set_mode = usb2_phy_set_mode,
+};
+
+int jh7110_usb2_phy_probe(struct udevice *dev)
+{
+ struct jh7110_usb2_phy *phy = dev_get_priv(dev);
+ ofnode node;
+ struct reg_field usb_split;
+ int ret;
+
+ phy->regs = dev_read_addr_ptr(dev);
+ if (!phy->regs)
+ return -EINVAL;
+
+ node = ofnode_by_compatible(ofnode_null(), "starfive,jh7110-sys-syscon");
+ if (!ofnode_valid(node)) {
+ dev_err(dev, "Can't get syscon dev node\n");
+ return -ENODEV;
+ }
+
+ phy->sys_syscon = syscon_node_to_regmap(node);
+ if (IS_ERR(phy->sys_syscon)) {
+ dev_err(dev, "Can't get syscon regmap: %d\n", ret);
+ return PTR_ERR(phy->sys_syscon);
+ }
+
+ usb_split.reg = SYSCON_USB_PDRSTN_REG_OFFSET;
+ usb_split.lsb = USB_PDRSTN_SPLIT_BIT;
+ usb_split.msb = USB_PDRSTN_SPLIT_BIT;
+ phy->usb_split = devm_regmap_field_alloc(dev, phy->sys_syscon, usb_split);
+ if (IS_ERR(phy->usb_split)) {
+ dev_err(dev, "USB split field init failed\n");
+ return PTR_ERR(phy->usb_split);
+ }
+
+ phy->usb_125m_clk = devm_clk_get(dev, "125m");
+ if (IS_ERR(phy->usb_125m_clk)) {
+ dev_err(dev, "Failed to get 125m clock\n");
+ return PTR_ERR(phy->usb_125m_clk);
+ }
+
+ phy->app_125m = devm_clk_get(dev, "app_125m");
+ if (IS_ERR(phy->app_125m)) {
+ dev_err(dev, "Failed to get app 125m clock\n");
+ return PTR_ERR(phy->app_125m);
+ }
+
+ return 0;
+}
+
+static const struct udevice_id jh7110_usb2_phy[] = {
+ { .compatible = "starfive,jh7110-usb-phy"},
+ {},
+};
+
+U_BOOT_DRIVER(jh7110_usb2_phy) = {
+ .name = "jh7110_usb2_phy",
+ .id = UCLASS_PHY,
+ .of_match = jh7110_usb2_phy,
+ .probe = jh7110_usb2_phy_probe,
+ .ops = &jh7110_usb2_phy_ops,
+ .priv_auto = sizeof(struct jh7110_usb2_phy),
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v5 3/8] phy: starfive: Add Starfive JH7110 PCIe 2.0 PHY driver
2024-10-12 3:13 [PATCH v5 0/8] Add Starfive JH7110 Cadence USB driver Minda Chen
2024-10-12 3:13 ` [PATCH v5 1/8] usb: cdns3: Set USB PHY mode in cdns3_drd_update_mode() Minda Chen
2024-10-12 3:13 ` [PATCH v5 2/8] phy: starfive: Add Starfive JH7110 USB 2.0 PHY driver Minda Chen
@ 2024-10-12 3:13 ` Minda Chen
2024-10-12 3:13 ` [PATCH v5 4/8] usb: cdns: starfive: Add cdns USB driver Minda Chen
` (5 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Minda Chen @ 2024-10-12 3:13 UTC (permalink / raw)
To: Marek Vasut, Tom Rini, Roger Quadros, Rick Chen, Leo,
Neil Armstrong, Alexey Romanov, Sumit Garg, Mark Kettenis,
Nishanth Menon
Cc: u-boot, Heinrich Schuchardt, Simon Glass, E Shattow, Minda Chen
Add Starfive JH7110 PCIe 2.0 PHY driver, which is generic
PHY driver and can be used as USB 3.0 driver.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
---
drivers/phy/starfive/Kconfig | 7 +
drivers/phy/starfive/Makefile | 1 +
drivers/phy/starfive/phy-jh7110-pcie.c | 239 +++++++++++++++++++++++++
3 files changed, 247 insertions(+)
create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c
diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig
index a7cf0a55dff..d11338ed484 100644
--- a/drivers/phy/starfive/Kconfig
+++ b/drivers/phy/starfive/Kconfig
@@ -4,6 +4,13 @@
menu "Starfive PHY driver"
+config PHY_STARFIVE_JH7110_PCIE
+ bool "Starfive JH7110 PCIe 2.0 PHY driver"
+ depends on PHY
+ help
+ Enable this to support the Starfive JH7110 PCIE 2.0/USB 3.0 PHY.
+ Generic PHY driver JH7110 USB 3.0/ PCIe 2.0.
+
config PHY_STARFIVE_JH7110_USB2
bool "Starfive JH7110 USB 2.0 PHY driver"
depends on PHY
diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile
index a405a75e34c..82f25aa21b7 100644
--- a/drivers/phy/starfive/Makefile
+++ b/drivers/phy/starfive/Makefile
@@ -3,4 +3,5 @@
# Copyright (C) 2023 Starfive
#
+obj-$(CONFIG_PHY_STARFIVE_JH7110_PCIE) += phy-jh7110-pcie.o
obj-$(CONFIG_PHY_STARFIVE_JH7110_USB2) += phy-jh7110-usb2.o
diff --git a/drivers/phy/starfive/phy-jh7110-pcie.c b/drivers/phy/starfive/phy-jh7110-pcie.c
new file mode 100644
index 00000000000..ecb04bdedfa
--- /dev/null
+++ b/drivers/phy/starfive/phy-jh7110-pcie.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * StarFive JH7110 PCIe 2.0 PHY driver
+ *
+ * Copyright (C) 2024 StarFive Technology Co., Ltd.
+ * Author: Minda Chen <minda.chen@starfivetech.com>
+ */
+#include <asm/io.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <errno.h>
+#include <generic-phy.h>
+#include <regmap.h>
+#include <soc.h>
+#include <syscon.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+
+#include "phy-jh7110-usb-syscon.h"
+
+#define PCIE_KVCO_LEVEL_OFF 0x28
+#define PCIE_USB3_PHY_PLL_CTL_OFF 0x7c
+#define PCIE_USB3_PHY_SS_MODE BIT(4)
+#define PCIE_KVCO_TUNE_SIGNAL_OFF 0x80
+#define PHY_KVCO_FINE_TUNE_LEVEL 0x91
+#define PHY_KVCO_FINE_TUNE_SIGNALS 0xc
+
+#define PCIE_USB3_PHY_MODE 0x1
+#define PCIE_BUS_WIDTH 0x2
+#define PCIE_USB3_PHY_ENABLE 0x1
+#define PCIE_USB3_PHY_SPLIT 0x1
+
+struct jh7110_pcie_phy {
+ struct phy *phy;
+ struct regmap *stg_syscon;
+ struct regmap *sys_syscon;
+ void __iomem *regs;
+ struct regmap_field *phy_mode;
+ struct regmap_field *bus_width;
+ struct regmap_field *usb3_phy_en;
+ struct regmap_field *usb_split;
+ enum phy_mode mode;
+};
+
+static int phy_pcie_mode_set(struct jh7110_pcie_phy *data, bool usb_mode)
+{
+ unsigned int phy_mode, width, usb3_phy, ss_mode, split;
+
+ /* default is PCIe mode */
+ if (!data->stg_syscon || !data->sys_syscon) {
+ if (usb_mode) {
+ dev_err(data->phy->dev, "doesn't support USB3 mode\n");
+ return -EINVAL;
+ }
+ return 0;
+ }
+
+ if (usb_mode) {
+ phy_mode = PCIE_USB3_PHY_MODE;
+ width = 0;
+ usb3_phy = PCIE_USB3_PHY_ENABLE;
+ ss_mode = PCIE_USB3_PHY_SS_MODE;
+ split = 0;
+ } else {
+ phy_mode = 0;
+ width = PCIE_BUS_WIDTH;
+ usb3_phy = 0;
+ ss_mode = 0;
+ split = PCIE_USB3_PHY_SPLIT;
+ }
+
+ regmap_field_write(data->phy_mode, phy_mode);
+ regmap_field_write(data->bus_width, width);
+ regmap_field_write(data->usb3_phy_en, usb3_phy);
+ clrsetbits_le32(data->regs + PCIE_USB3_PHY_PLL_CTL_OFF,
+ PCIE_USB3_PHY_SS_MODE, ss_mode);
+ regmap_field_write(data->usb_split, split);
+
+ return 0;
+}
+
+static void phy_kvco_gain_set(struct jh7110_pcie_phy *phy)
+{
+ /* PCIe Multi-PHY PLL KVCO Gain fine tune settings: */
+ writel(PHY_KVCO_FINE_TUNE_LEVEL, phy->regs + PCIE_KVCO_LEVEL_OFF);
+ writel(PHY_KVCO_FINE_TUNE_SIGNALS, phy->regs + PCIE_KVCO_TUNE_SIGNAL_OFF);
+}
+
+static int jh7110_pcie_phy_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
+{
+ struct udevice *dev = phy->dev;
+ struct jh7110_pcie_phy *pcie_phy = dev_get_priv(dev);
+ int ret;
+
+ if (mode == pcie_phy->mode)
+ return 0;
+
+ switch (mode) {
+ case PHY_MODE_USB_HOST:
+ case PHY_MODE_USB_DEVICE:
+ case PHY_MODE_USB_OTG:
+ ret = phy_pcie_mode_set(pcie_phy, 1);
+ if (ret)
+ return ret;
+ break;
+ case PHY_MODE_PCIE:
+ phy_pcie_mode_set(pcie_phy, 0);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dev_dbg(phy->dev, "Changing PHY mode to %d\n", mode);
+ pcie_phy->mode = mode;
+
+ return 0;
+}
+
+static const struct phy_ops jh7110_pcie_phy_ops = {
+ .set_mode = jh7110_pcie_phy_set_mode,
+};
+
+static int phy_stg_regfield_init(struct udevice *dev, int mode, int usb3)
+{
+ struct jh7110_pcie_phy *phy = dev_get_priv(dev);
+ struct reg_field phy_mode = REG_FIELD(mode, 20, 21);
+ struct reg_field bus_width = REG_FIELD(usb3, 2, 3);
+ struct reg_field usb3_phy_en = REG_FIELD(usb3, 4, 4);
+
+ phy->phy_mode = devm_regmap_field_alloc(dev, phy->stg_syscon, phy_mode);
+ if (IS_ERR(phy->phy_mode)) {
+ dev_err(dev, "PHY mode reg field init failed\n");
+ return PTR_ERR(phy->phy_mode);
+ }
+
+ phy->bus_width = devm_regmap_field_alloc(dev, phy->stg_syscon, bus_width);
+ if (IS_ERR(phy->bus_width)) {
+ dev_err(dev, "PHY bus width reg field init failed\n");
+ return PTR_ERR(phy->bus_width);
+ }
+
+ phy->usb3_phy_en = devm_regmap_field_alloc(dev, phy->stg_syscon, usb3_phy_en);
+ if (IS_ERR(phy->usb3_phy_en)) {
+ dev_err(dev, "USB3 PHY enable field init failed\n");
+ return PTR_ERR(phy->bus_width);
+ }
+
+ return 0;
+}
+
+static int phy_sys_regfield_init(struct udevice *dev, int split)
+{
+ struct jh7110_pcie_phy *phy = dev_get_priv(dev);
+ struct reg_field usb_split = REG_FIELD(split, USB_PDRSTN_SPLIT_BIT, USB_PDRSTN_SPLIT_BIT);
+
+ phy->usb_split = devm_regmap_field_alloc(dev, phy->sys_syscon, usb_split);
+ if (IS_ERR(phy->usb_split)) {
+ dev_err(dev, "USB split field init failed\n");
+ return PTR_ERR(phy->usb_split);
+ }
+
+ return 0;
+}
+
+static int starfive_pcie_phy_get_syscon(struct udevice *dev)
+{
+ struct jh7110_pcie_phy *phy = dev_get_priv(dev);
+ struct ofnode_phandle_args sys_phandle, stg_phandle;
+ int ret;
+
+ /* get corresponding syscon phandle */
+ ret = dev_read_phandle_with_args(dev, "starfive,sys-syscon", NULL, 0, 0,
+ &sys_phandle);
+
+ if (ret < 0) {
+ dev_err(dev, "Can't get sys cfg phandle: %d\n", ret);
+ return ret;
+ }
+
+ ret = dev_read_phandle_with_args(dev, "starfive,stg-syscon", NULL, 2, 0,
+ &stg_phandle);
+
+ if (ret < 0) {
+ dev_err(dev, "Can't get stg cfg phandle: %d\n", ret);
+ return ret;
+ }
+
+ phy->sys_syscon = syscon_node_to_regmap(sys_phandle.node);
+ /* get syscon register offset */
+ if (!IS_ERR(phy->sys_syscon)) {
+ ret = phy_sys_regfield_init(dev, SYSCON_USB_PDRSTN_REG_OFFSET);
+ if (ret)
+ return ret;
+ } else {
+ phy->sys_syscon = NULL;
+ }
+
+ phy->stg_syscon = syscon_node_to_regmap(stg_phandle.node);
+ if (!IS_ERR(phy->stg_syscon))
+ return phy_stg_regfield_init(dev, stg_phandle.args[0],
+ stg_phandle.args[1]);
+ else
+ phy->stg_syscon = NULL;
+
+ return 0;
+}
+
+int jh7110_pcie_phy_probe(struct udevice *dev)
+{
+ struct jh7110_pcie_phy *phy = dev_get_priv(dev);
+ int rc;
+
+ phy->regs = dev_read_addr_ptr(dev);
+ if (!phy->regs)
+ return -EINVAL;
+
+ rc = starfive_pcie_phy_get_syscon(dev);
+ if (rc)
+ return rc;
+
+ phy_kvco_gain_set(phy);
+
+ return 0;
+}
+
+static const struct udevice_id jh7110_pcie_phy[] = {
+ { .compatible = "starfive,jh7110-pcie-phy"},
+ {},
+};
+
+U_BOOT_DRIVER(jh7110_pcie_phy) = {
+ .name = "jh7110_pcie_phy",
+ .id = UCLASS_PHY,
+ .of_match = jh7110_pcie_phy,
+ .probe = jh7110_pcie_phy_probe,
+ .ops = &jh7110_pcie_phy_ops,
+ .priv_auto = sizeof(struct jh7110_pcie_phy),
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v5 4/8] usb: cdns: starfive: Add cdns USB driver
2024-10-12 3:13 [PATCH v5 0/8] Add Starfive JH7110 Cadence USB driver Minda Chen
` (2 preceding siblings ...)
2024-10-12 3:13 ` [PATCH v5 3/8] phy: starfive: Add Starfive JH7110 PCIe " Minda Chen
@ 2024-10-12 3:13 ` Minda Chen
2024-10-12 3:34 ` Marek Vasut
2024-10-12 3:13 ` [PATCH v5 5/8] spl: starfive: visionfive2: Disable USB overcurrent pin by default Minda Chen
` (4 subsequent siblings)
8 siblings, 1 reply; 14+ messages in thread
From: Minda Chen @ 2024-10-12 3:13 UTC (permalink / raw)
To: Marek Vasut, Tom Rini, Roger Quadros, Rick Chen, Leo,
Neil Armstrong, Alexey Romanov, Sumit Garg, Mark Kettenis,
Nishanth Menon
Cc: u-boot, Heinrich Schuchardt, Simon Glass, E Shattow, Minda Chen
Add cdns USB3 wrapper driver. And cdns core driver also get
dr mode from wrapper devcie dts node to make it is same with
Starfive cdns USB Linux kernel driver, preparing for enable
OF_UPSTREAM.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
---
drivers/usb/cdns3/Kconfig | 7 ++
drivers/usb/cdns3/Makefile | 2 +
drivers/usb/cdns3/cdns3-starfive.c | 183 +++++++++++++++++++++++++++++
drivers/usb/cdns3/core.c | 3 +
4 files changed, 195 insertions(+)
create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
index 35b61497d9c..6c9595c3c49 100644
--- a/drivers/usb/cdns3/Kconfig
+++ b/drivers/usb/cdns3/Kconfig
@@ -55,4 +55,11 @@ config USB_CDNS3_TI
help
Say 'Y' here if you are building for Texas Instruments
platforms that contain Cadence USB3 controller core. E.g.: J721e.
+
+config USB_CDNS3_STARFIVE
+ tristate "Cadence USB3 support on Starfive platforms"
+ default y if STARFIVE_JH7110
+ help
+ Say 'Y' here if you are building for Starfive platforms
+ that contain Cadence USB3 controller core. E.g.: JH7110.
endif
diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
index 18d7190755d..03d1eadb2ff 100644
--- a/drivers/usb/cdns3/Makefile
+++ b/drivers/usb/cdns3/Makefile
@@ -9,3 +9,5 @@ cdns3-$(CONFIG_$(SPL_)USB_CDNS3_GADGET) += gadget.o ep0.o
cdns3-$(CONFIG_$(SPL_)USB_CDNS3_HOST) += host.o
obj-$(CONFIG_USB_CDNS3_TI) += cdns3-ti.o
+
+obj-$(CONFIG_USB_CDNS3_STARFIVE) += cdns3-starfive.o
diff --git a/drivers/usb/cdns3/cdns3-starfive.c b/drivers/usb/cdns3/cdns3-starfive.c
new file mode 100644
index 00000000000..fad05451c80
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-starfive.c
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * cdns3-starfive.c - StarFive specific Glue layer for Cadence USB Controller
+ *
+ * Copyright (C) 2024 StarFive Technology Co., Ltd.
+ *
+ * Author: Minda Chen <minda.chen@starfivetech.com>
+ */
+
+#include <asm/io.h>
+#include <clk.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <linux/bitops.h>
+#include <linux/usb/otg.h>
+#include <reset.h>
+#include <regmap.h>
+#include <syscon.h>
+#include <malloc.h>
+
+#include "core.h"
+
+#define USB_STRAP_HOST BIT(17)
+#define USB_STRAP_DEVICE BIT(18)
+#define USB_STRAP_MASK GENMASK(18, 16)
+
+#define USB_SUSPENDM_HOST BIT(19)
+#define USB_SUSPENDM_MASK BIT(19)
+
+#define USB_MISC_CFG_MASK GENMASK(23, 20)
+#define USB_SUSPENDM_BYPS BIT(20)
+#define USB_PLL_EN BIT(22)
+#define USB_REFCLK_MODE BIT(23)
+
+struct cdns_starfive {
+ struct udevice *dev;
+ struct regmap *stg_syscon;
+ struct reset_ctl_bulk resets;
+ struct clk_bulk clks;
+ u32 stg_usb_mode;
+ enum usb_dr_mode mode;
+};
+
+static void cdns_mode_init(struct cdns_starfive *data, enum usb_dr_mode mode)
+{
+ unsigned int strap, suspendm;
+
+ regmap_update_bits(data->stg_syscon, data->stg_usb_mode,
+ USB_MISC_CFG_MASK,
+ USB_SUSPENDM_BYPS | USB_PLL_EN | USB_REFCLK_MODE);
+
+ switch (mode) {
+ case USB_DR_MODE_HOST:
+ strap = USB_STRAP_HOST;
+ suspendm = USB_SUSPENDM_HOST;
+ break;
+
+ case USB_DR_MODE_PERIPHERAL:
+ strap = USB_STRAP_DEVICE;
+ suspendm = 0;
+ break;
+ default:
+ return;
+ }
+
+ regmap_update_bits(data->stg_syscon, data->stg_usb_mode,
+ USB_SUSPENDM_MASK | USB_STRAP_MASK,
+ strap | suspendm);
+}
+
+static void cdns_clk_rst_deinit(struct cdns_starfive *data)
+{
+ reset_assert_bulk(&data->resets);
+ clk_disable_bulk(&data->clks);
+}
+
+static int cdns_clk_rst_init(struct cdns_starfive *data)
+{
+ int ret;
+
+ ret = clk_get_bulk(data->dev, &data->clks);
+ if (ret)
+ return ret;
+
+ ret = reset_get_bulk(data->dev, &data->resets);
+ if (ret)
+ goto err_clk;
+
+ ret = clk_enable_bulk(&data->clks);
+ if (ret) {
+ dev_err(data->dev, "clk enable failed: %d\n", ret);
+ goto err_en_clk;
+ }
+
+ ret = reset_deassert_bulk(&data->resets);
+ if (ret) {
+ dev_err(data->dev, "reset deassert failed: %d\n", ret);
+ goto err_reset;
+ }
+
+ return 0;
+
+err_reset:
+ clk_disable_bulk(&data->clks);
+err_en_clk:
+ reset_release_bulk(&data->resets);
+err_clk:
+ clk_release_bulk(&data->clks);
+
+ return ret;
+}
+
+static int cdns_starfive_get_syscon(struct cdns_starfive *data)
+{
+ struct ofnode_phandle_args phandle;
+ int ret;
+
+ ret = dev_read_phandle_with_args(data->dev, "starfive,stg-syscon", NULL, 1, 0,
+ &phandle);
+ if (ret < 0) {
+ dev_err(data->dev, "Can't get stg cfg phandle: %d\n", ret);
+ return ret;
+ }
+
+ data->stg_syscon = syscon_node_to_regmap(phandle.node);
+ if (IS_ERR(data->stg_syscon)) {
+ dev_err(data->dev, "fail to get regmap: %d\n", (int)PTR_ERR(data->stg_syscon));
+ return PTR_ERR(data->stg_syscon);
+ }
+
+ data->stg_usb_mode = phandle.args[0];
+
+ return 0;
+}
+
+static int cdns_starfive_probe(struct udevice *dev)
+{
+ struct cdns_starfive *data = dev_get_plat(dev);
+ enum usb_dr_mode dr_mode;
+ int ret;
+
+ data->dev = dev;
+
+ ret = cdns_starfive_get_syscon(data);
+ if (ret)
+ return ret;
+
+ dr_mode = usb_get_dr_mode(dev_ofnode(dev));
+
+ data->mode = dr_mode;
+ ret = cdns_clk_rst_init(data);
+ if (ret) {
+ dev_err(data->dev, "clk reset failed: %d\n", ret);
+ return ret;
+ }
+ cdns_mode_init(data, dr_mode);
+
+ return 0;
+}
+
+static int cdns_starfive_remove(struct udevice *dev)
+{
+ struct cdns_starfive *data = dev_get_plat(dev);
+
+ cdns_clk_rst_deinit(data);
+ return 0;
+}
+
+static const struct udevice_id cdns_starfive_of_match[] = {
+ { .compatible = "starfive,jh7110-usb", },
+ {},
+};
+
+U_BOOT_DRIVER(cdns_starfive) = {
+ .name = "cdns-starfive",
+ .id = UCLASS_NOP,
+ .of_match = cdns_starfive_of_match,
+ .bind = cdns3_bind,
+ .probe = cdns_starfive_probe,
+ .remove = cdns_starfive_remove,
+ .plat_auto = sizeof(struct cdns_starfive),
+ .flags = DM_FLAG_OS_PREPARE,
+};
diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
index cbe06a9e7b6..9d0a56fd0e7 100644
--- a/drivers/usb/cdns3/core.c
+++ b/drivers/usb/cdns3/core.c
@@ -410,6 +410,9 @@ int cdns3_bind(struct udevice *parent)
name = ofnode_get_name(node);
dr_mode = usb_get_dr_mode(node);
+ if (dr_mode == USB_DR_MODE_UNKNOWN)
+ dr_mode = usb_get_dr_mode(dev_ofnode(parent));
+
switch (dr_mode) {
#if defined(CONFIG_SPL_USB_HOST) || \
(!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST))
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH v5 4/8] usb: cdns: starfive: Add cdns USB driver
2024-10-12 3:13 ` [PATCH v5 4/8] usb: cdns: starfive: Add cdns USB driver Minda Chen
@ 2024-10-12 3:34 ` Marek Vasut
2024-12-16 7:37 ` E Shattow
0 siblings, 1 reply; 14+ messages in thread
From: Marek Vasut @ 2024-10-12 3:34 UTC (permalink / raw)
To: Minda Chen, Tom Rini, Roger Quadros, Rick Chen, Leo,
Neil Armstrong, Alexey Romanov, Sumit Garg, Mark Kettenis,
Nishanth Menon
Cc: u-boot, Heinrich Schuchardt, Simon Glass, E Shattow
On 10/12/24 5:13 AM, Minda Chen wrote:
> Add cdns USB3 wrapper driver. And cdns core driver also get
> dr mode from wrapper devcie dts node to make it is same with
> Starfive cdns USB Linux kernel driver, preparing for enable
> OF_UPSTREAM.
>
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> ---
> drivers/usb/cdns3/Kconfig | 7 ++
> drivers/usb/cdns3/Makefile | 2 +
> drivers/usb/cdns3/cdns3-starfive.c | 183 +++++++++++++++++++++++++++++
> drivers/usb/cdns3/core.c | 3 +
> 4 files changed, 195 insertions(+)
> create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
>
> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
> index 35b61497d9c..6c9595c3c49 100644
> --- a/drivers/usb/cdns3/Kconfig
> +++ b/drivers/usb/cdns3/Kconfig
> @@ -55,4 +55,11 @@ config USB_CDNS3_TI
> help
> Say 'Y' here if you are building for Texas Instruments
> platforms that contain Cadence USB3 controller core. E.g.: J721e.
> +
> +config USB_CDNS3_STARFIVE
> + tristate "Cadence USB3 support on Starfive platforms"
> + default y if STARFIVE_JH7110
> + help
> + Say 'Y' here if you are building for Starfive platforms
> + that contain Cadence USB3 controller core. E.g.: JH7110.
> endif
Keep the list sorted.
> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
> index 18d7190755d..03d1eadb2ff 100644
> --- a/drivers/usb/cdns3/Makefile
> +++ b/drivers/usb/cdns3/Makefile
> @@ -9,3 +9,5 @@ cdns3-$(CONFIG_$(SPL_)USB_CDNS3_GADGET) += gadget.o ep0.o
> cdns3-$(CONFIG_$(SPL_)USB_CDNS3_HOST) += host.o
>
> obj-$(CONFIG_USB_CDNS3_TI) += cdns3-ti.o
> +
> +obj-$(CONFIG_USB_CDNS3_STARFIVE) += cdns3-starfive.o
Keep the list sorted.
> diff --git a/drivers/usb/cdns3/cdns3-starfive.c b/drivers/usb/cdns3/cdns3-starfive.c
> new file mode 100644
> index 00000000000..fad05451c80
> --- /dev/null
> +++ b/drivers/usb/cdns3/cdns3-starfive.c
> @@ -0,0 +1,183 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * cdns3-starfive.c - StarFive specific Glue layer for Cadence USB Controller
> + *
> + * Copyright (C) 2024 StarFive Technology Co., Ltd.
> + *
> + * Author: Minda Chen <minda.chen@starfivetech.com>
> + */
> +
> +#include <asm/io.h>
> +#include <clk.h>
> +#include <dm.h>
> +#include <dm/device_compat.h>
> +#include <linux/bitops.h>
> +#include <linux/usb/otg.h>
> +#include <reset.h>
> +#include <regmap.h>
> +#include <syscon.h>
> +#include <malloc.h>
> +
> +#include "core.h"
> +
> +#define USB_STRAP_HOST BIT(17)
> +#define USB_STRAP_DEVICE BIT(18)
> +#define USB_STRAP_MASK GENMASK(18, 16)
> +
> +#define USB_SUSPENDM_HOST BIT(19)
> +#define USB_SUSPENDM_MASK BIT(19)
> +
> +#define USB_MISC_CFG_MASK GENMASK(23, 20)
> +#define USB_SUSPENDM_BYPS BIT(20)
> +#define USB_PLL_EN BIT(22)
> +#define USB_REFCLK_MODE BIT(23)
> +
> +struct cdns_starfive {
> + struct udevice *dev;
> + struct regmap *stg_syscon;
> + struct reset_ctl_bulk resets;
> + struct clk_bulk clks;
> + u32 stg_usb_mode;
> + enum usb_dr_mode mode;
> +};
> +
> +static void cdns_mode_init(struct cdns_starfive *data, enum usb_dr_mode mode)
> +{
> + unsigned int strap, suspendm;
> +
> + regmap_update_bits(data->stg_syscon, data->stg_usb_mode,
> + USB_MISC_CFG_MASK,
> + USB_SUSPENDM_BYPS | USB_PLL_EN | USB_REFCLK_MODE);
> +
> + switch (mode) {
> + case USB_DR_MODE_HOST:
> + strap = USB_STRAP_HOST;
> + suspendm = USB_SUSPENDM_HOST;
> + break;
> +
Drop the newline please.
> + case USB_DR_MODE_PERIPHERAL:
> + strap = USB_STRAP_DEVICE;
> + suspendm = 0;
> + break;
> + default:
> + return;
> + }
> +
> + regmap_update_bits(data->stg_syscon, data->stg_usb_mode,
> + USB_SUSPENDM_MASK | USB_STRAP_MASK,
> + strap | suspendm);
> +}
[...]
> diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
> index cbe06a9e7b6..9d0a56fd0e7 100644
> --- a/drivers/usb/cdns3/core.c
> +++ b/drivers/usb/cdns3/core.c
> @@ -410,6 +410,9 @@ int cdns3_bind(struct udevice *parent)
> name = ofnode_get_name(node);
> dr_mode = usb_get_dr_mode(node);
>
> + if (dr_mode == USB_DR_MODE_UNKNOWN)
> + dr_mode = usb_get_dr_mode(dev_ofnode(parent));
Separate patch for core changes please.
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH v5 4/8] usb: cdns: starfive: Add cdns USB driver
2024-10-12 3:34 ` Marek Vasut
@ 2024-12-16 7:37 ` E Shattow
2024-12-19 8:28 ` 回复: " Minda Chen
0 siblings, 1 reply; 14+ messages in thread
From: E Shattow @ 2024-12-16 7:37 UTC (permalink / raw)
To: Marek Vasut, Minda Chen, Tom Rini, Roger Quadros, Rick Chen, Leo,
Neil Armstrong, Alexey Romanov, Sumit Garg, Mark Kettenis,
Nishanth Menon
Cc: u-boot, Heinrich Schuchardt, Simon Glass
On 10/11/24 20:34, Marek Vasut wrote:
> On 10/12/24 5:13 AM, Minda Chen wrote:
>> Add cdns USB3 wrapper driver. And cdns core driver also get
>> dr mode from wrapper devcie dts node to make it is same with
>> Starfive cdns USB Linux kernel driver, preparing for enable
>> OF_UPSTREAM.
>>
>> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
>> ---
>> drivers/usb/cdns3/Kconfig | 7 ++
>> drivers/usb/cdns3/Makefile | 2 +
>> drivers/usb/cdns3/cdns3-starfive.c | 183 +++++++++++++++++++++++++++++
>> drivers/usb/cdns3/core.c | 3 +
>> 4 files changed, 195 insertions(+)
>> create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
>>
>> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
>> index 35b61497d9c..6c9595c3c49 100644
>> --- a/drivers/usb/cdns3/Kconfig
>> +++ b/drivers/usb/cdns3/Kconfig
>> @@ -55,4 +55,11 @@ config USB_CDNS3_TI
>> help
>> Say 'Y' here if you are building for Texas Instruments
>> platforms that contain Cadence USB3 controller core. E.g.: J721e.
>> +
>> +config USB_CDNS3_STARFIVE
>> + tristate "Cadence USB3 support on Starfive platforms"
>> + default y if STARFIVE_JH7110
>> + help
>> + Say 'Y' here if you are building for Starfive platforms
>> + that contain Cadence USB3 controller core. E.g.: JH7110.
>> endif
>
> Keep the list sorted.
>
>> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
>> index 18d7190755d..03d1eadb2ff 100644
>> --- a/drivers/usb/cdns3/Makefile
>> +++ b/drivers/usb/cdns3/Makefile
>> @@ -9,3 +9,5 @@ cdns3-$(CONFIG_$(SPL_)USB_CDNS3_GADGET) += gadget.o
>> ep0.o
>> cdns3-$(CONFIG_$(SPL_)USB_CDNS3_HOST) += host.o
>> obj-$(CONFIG_USB_CDNS3_TI) += cdns3-ti.o
>> +
>> +obj-$(CONFIG_USB_CDNS3_STARFIVE) += cdns3-starfive.o
>
> Keep the list sorted.
>
>> diff --git a/drivers/usb/cdns3/cdns3-starfive.c b/drivers/usb/cdns3/
>> cdns3-starfive.c
>> new file mode 100644
>> index 00000000000..fad05451c80
>> --- /dev/null
>> +++ b/drivers/usb/cdns3/cdns3-starfive.c
>> @@ -0,0 +1,183 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * cdns3-starfive.c - StarFive specific Glue layer for Cadence USB
>> Controller
>> + *
>> + * Copyright (C) 2024 StarFive Technology Co., Ltd.
>> + *
>> + * Author: Minda Chen <minda.chen@starfivetech.com>
>> + */
>> +
>> +#include <asm/io.h>
>> +#include <clk.h>
>> +#include <dm.h>
>> +#include <dm/device_compat.h>
>> +#include <linux/bitops.h>
>> +#include <linux/usb/otg.h>
>> +#include <reset.h>
>> +#include <regmap.h>
>> +#include <syscon.h>
>> +#include <malloc.h>
>> +
>> +#include "core.h"
>> +
>> +#define USB_STRAP_HOST BIT(17)
>> +#define USB_STRAP_DEVICE BIT(18)
>> +#define USB_STRAP_MASK GENMASK(18, 16)
>> +
>> +#define USB_SUSPENDM_HOST BIT(19)
>> +#define USB_SUSPENDM_MASK BIT(19)
>> +
>> +#define USB_MISC_CFG_MASK GENMASK(23, 20)
>> +#define USB_SUSPENDM_BYPS BIT(20)
>> +#define USB_PLL_EN BIT(22)
>> +#define USB_REFCLK_MODE BIT(23)
>> +
>> +struct cdns_starfive {
>> + struct udevice *dev;
>> + struct regmap *stg_syscon;
>> + struct reset_ctl_bulk resets;
>> + struct clk_bulk clks;
>> + u32 stg_usb_mode;
>> + enum usb_dr_mode mode;
>> +};
>> +
>> +static void cdns_mode_init(struct cdns_starfive *data, enum
>> usb_dr_mode mode)
>> +{
>> + unsigned int strap, suspendm;
>> +
>> + regmap_update_bits(data->stg_syscon, data->stg_usb_mode,
>> + USB_MISC_CFG_MASK,
>> + USB_SUSPENDM_BYPS | USB_PLL_EN | USB_REFCLK_MODE);
>> +
>> + switch (mode) {
>> + case USB_DR_MODE_HOST:
>> + strap = USB_STRAP_HOST;
>> + suspendm = USB_SUSPENDM_HOST;
>> + break;
>> +
>
> Drop the newline please.
>
>> + case USB_DR_MODE_PERIPHERAL:
>> + strap = USB_STRAP_DEVICE;
>> + suspendm = 0;
>> + break;
>> + default:
>> + return;
>> + }
>> +
>> + regmap_update_bits(data->stg_syscon, data->stg_usb_mode,
>> + USB_SUSPENDM_MASK | USB_STRAP_MASK,
>> + strap | suspendm);
>> +}
>
> [...]
>
>> diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
>> index cbe06a9e7b6..9d0a56fd0e7 100644
>> --- a/drivers/usb/cdns3/core.c
>> +++ b/drivers/usb/cdns3/core.c
>> @@ -410,6 +410,9 @@ int cdns3_bind(struct udevice *parent)
>> name = ofnode_get_name(node);
>> dr_mode = usb_get_dr_mode(node);
>> + if (dr_mode == USB_DR_MODE_UNKNOWN)
>> + dr_mode = usb_get_dr_mode(dev_ofnode(parent));
> Separate patch for core changes please.
Hi, Minda, can you send v6 with requested changes by Marek and drop
patch 7/8 ("dts: starfive: Add JH7110 Cadence USB dts node")? Thanks! -E
^ permalink raw reply [flat|nested] 14+ messages in thread* 回复: [PATCH v5 4/8] usb: cdns: starfive: Add cdns USB driver
2024-12-16 7:37 ` E Shattow
@ 2024-12-19 8:28 ` Minda Chen
0 siblings, 0 replies; 14+ messages in thread
From: Minda Chen @ 2024-12-19 8:28 UTC (permalink / raw)
To: E Shattow, Marek Vasut, Tom Rini, Roger Quadros, Rick Chen, Leo,
Neil Armstrong, Alexey Romanov, Sumit Garg, Mark Kettenis,
Nishanth Menon
Cc: u-boot@lists.denx.de, Heinrich Schuchardt, Simon Glass
>
>
>
> On 10/11/24 20:34, Marek Vasut wrote:
> > On 10/12/24 5:13 AM, Minda Chen wrote:
> >> Add cdns USB3 wrapper driver. And cdns core driver also get dr mode
> >> from wrapper devcie dts node to make it is same with Starfive cdns
> >> USB Linux kernel driver, preparing for enable OF_UPSTREAM.
> >>
> >> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> >> ---
> >> drivers/usb/cdns3/Kconfig | 7 ++
> >> drivers/usb/cdns3/Makefile | 2 +
> >> drivers/usb/cdns3/cdns3-starfive.c | 183
> >> +++++++++++++++++++++++++++++
> >> drivers/usb/cdns3/core.c | 3 +
> >> 4 files changed, 195 insertions(+)
> >> create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
> >>
> >> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
> >> index 35b61497d9c..6c9595c3c49 100644
> >> --- a/drivers/usb/cdns3/Kconfig
> >> +++ b/drivers/usb/cdns3/Kconfig
> >> @@ -55,4 +55,11 @@ config USB_CDNS3_TI
> >> help
> >> Say 'Y' here if you are building for Texas Instruments
> >> platforms that contain Cadence USB3 controller core. E.g.:
> J721e.
> >> +
> >> +config USB_CDNS3_STARFIVE
> >> + tristate "Cadence USB3 support on Starfive platforms"
> >> + default y if STARFIVE_JH7110
> >> + help
> >> + Say 'Y' here if you are building for Starfive platforms
> >> + that contain Cadence USB3 controller core. E.g.: JH7110.
> >> endif
> >
> > Keep the list sorted.
> >
> >> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
> >> index 18d7190755d..03d1eadb2ff 100644
> >> --- a/drivers/usb/cdns3/Makefile
> >> +++ b/drivers/usb/cdns3/Makefile
> >> @@ -9,3 +9,5 @@ cdns3-$(CONFIG_$(SPL_)USB_CDNS3_GADGET) +=
> >> gadget.o ep0.o
> >> cdns3-$(CONFIG_$(SPL_)USB_CDNS3_HOST) += host.o
> >> obj-$(CONFIG_USB_CDNS3_TI) += cdns3-ti.o
> >> +
> >> +obj-$(CONFIG_USB_CDNS3_STARFIVE) += cdns3-starfive.o
> >
> > Keep the list sorted.
> >
> >> diff --git a/drivers/usb/cdns3/cdns3-starfive.c b/drivers/usb/cdns3/
> >> cdns3-starfive.c new file mode 100644 index 00000000000..fad05451c80
> >> --- /dev/null
> >> +++ b/drivers/usb/cdns3/cdns3-starfive.c
> >> @@ -0,0 +1,183 @@
> >> +// SPDX-License-Identifier: GPL-2.0
> >> +/*
> >> + * cdns3-starfive.c - StarFive specific Glue layer for Cadence USB
> >> Controller
> >> + *
> >> + * Copyright (C) 2024 StarFive Technology Co., Ltd.
> >> + *
> >> + * Author: Minda Chen <minda.chen@starfivetech.com> */
> >> +
> >> +#include <asm/io.h>
> >> +#include <clk.h>
> >> +#include <dm.h>
> >> +#include <dm/device_compat.h>
> >> +#include <linux/bitops.h>
> >> +#include <linux/usb/otg.h>
> >> +#include <reset.h>
> >> +#include <regmap.h>
> >> +#include <syscon.h>
> >> +#include <malloc.h>
> >> +
> >> +#include "core.h"
> >> +
> >> +#define USB_STRAP_HOST BIT(17) #define
> USB_STRAP_DEVICE
> >> +BIT(18) #define USB_STRAP_MASK GENMASK(18, 16)
> >> +
> >> +#define USB_SUSPENDM_HOST BIT(19) #define
> USB_SUSPENDM_MASK
> >> +BIT(19)
> >> +
> >> +#define USB_MISC_CFG_MASK GENMASK(23, 20) #define
> >> +USB_SUSPENDM_BYPS BIT(20) #define
> USB_PLL_EN
> >> +BIT(22) #define USB_REFCLK_MODE BIT(23)
> >> +
> >> +struct cdns_starfive {
> >> + struct udevice *dev;
> >> + struct regmap *stg_syscon;
> >> + struct reset_ctl_bulk resets;
> >> + struct clk_bulk clks;
> >> + u32 stg_usb_mode;
> >> + enum usb_dr_mode mode;
> >> +};
> >> +
> >> +static void cdns_mode_init(struct cdns_starfive *data, enum
> >> usb_dr_mode mode)
> >> +{
> >> + unsigned int strap, suspendm;
> >> +
> >> + regmap_update_bits(data->stg_syscon, data->stg_usb_mode,
> >> + USB_MISC_CFG_MASK,
> >> + USB_SUSPENDM_BYPS | USB_PLL_EN |
> USB_REFCLK_MODE);
> >> +
> >> + switch (mode) {
> >> + case USB_DR_MODE_HOST:
> >> + strap = USB_STRAP_HOST;
> >> + suspendm = USB_SUSPENDM_HOST;
> >> + break;
> >> +
> >
> > Drop the newline please.
> >
> >> + case USB_DR_MODE_PERIPHERAL:
> >> + strap = USB_STRAP_DEVICE;
> >> + suspendm = 0;
> >> + break;
> >> + default:
> >> + return;
> >> + }
> >> +
> >> + regmap_update_bits(data->stg_syscon, data->stg_usb_mode,
> >> + USB_SUSPENDM_MASK | USB_STRAP_MASK,
> >> + strap | suspendm);
> >> +}
> >
> > [...]
> >
> >> diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
> >> index cbe06a9e7b6..9d0a56fd0e7 100644
> >> --- a/drivers/usb/cdns3/core.c
> >> +++ b/drivers/usb/cdns3/core.c
> >> @@ -410,6 +410,9 @@ int cdns3_bind(struct udevice *parent)
> >> name = ofnode_get_name(node);
> >> dr_mode = usb_get_dr_mode(node);
> >> + if (dr_mode == USB_DR_MODE_UNKNOWN)
> >> + dr_mode = usb_get_dr_mode(dev_ofnode(parent));
> > Separate patch for core changes please.
>
> Hi, Minda, can you send v6 with requested changes by Marek and drop patch
> 7/8 ("dts: starfive: Add JH7110 Cadence USB dts node")? Thanks! -E
I am busy working with another IC. Next month I will send a new version.
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v5 5/8] spl: starfive: visionfive2: Disable USB overcurrent pin by default.
2024-10-12 3:13 [PATCH v5 0/8] Add Starfive JH7110 Cadence USB driver Minda Chen
` (3 preceding siblings ...)
2024-10-12 3:13 ` [PATCH v5 4/8] usb: cdns: starfive: Add cdns USB driver Minda Chen
@ 2024-10-12 3:13 ` Minda Chen
2024-10-12 3:13 ` [PATCH v5 6/8] configs: starfive: Add visionfive2 cadence USB configuration Minda Chen
` (3 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Minda Chen @ 2024-10-12 3:13 UTC (permalink / raw)
To: Marek Vasut, Tom Rini, Roger Quadros, Rick Chen, Leo,
Neil Armstrong, Alexey Romanov, Sumit Garg, Mark Kettenis,
Nishanth Menon
Cc: u-boot, Heinrich Schuchardt, Simon Glass, E Shattow, Minda Chen
For some JH7110 boards, USB host overcurent pin is not reserved,
To make USB host work, overcurrent pin must be disabled. So set the
pin default disabled in spl stage.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
---
arch/riscv/include/asm/arch-jh7110/gpio.h | 5 +++++
board/starfive/visionfive2/spl.c | 3 +++
2 files changed, 8 insertions(+)
diff --git a/arch/riscv/include/asm/arch-jh7110/gpio.h b/arch/riscv/include/asm/arch-jh7110/gpio.h
index 90aa2f8a9ed..be2a1e0d1c8 100644
--- a/arch/riscv/include/asm/arch-jh7110/gpio.h
+++ b/arch/riscv/include/asm/arch-jh7110/gpio.h
@@ -63,6 +63,11 @@ enum gpio_state {
GPIO_DIN_MASK << GPIO_SHIFT(gpi), \
((gpio + 2) & GPIO_DIN_MASK) << GPIO_SHIFT(gpi))
+#define SYS_IOMUX_DIN_DISABLED(gpi)\
+ clrsetbits_le32(JH7110_SYS_IOMUX + GPIO_DIN + GPIO_OFFSET(gpi), \
+ GPIO_DIN_MASK << GPIO_SHIFT(gpi), \
+ ((0x1) & GPIO_DIN_MASK) << GPIO_SHIFT(gpi))
+
#define SYS_IOMUX_SET_DS(gpio, ds) \
clrsetbits_le32(JH7110_SYS_IOMUX + GPIO_CONFIG + gpio * 4, \
GPIO_DS_MASK, (ds) << GPIO_DS_SHIFT)
diff --git a/board/starfive/visionfive2/spl.c b/board/starfive/visionfive2/spl.c
index f55c6b5d34c..0c9798f32b8 100644
--- a/board/starfive/visionfive2/spl.c
+++ b/board/starfive/visionfive2/spl.c
@@ -461,6 +461,9 @@ void board_init_f(ulong dummy)
JH7110_CLK_CPU_ROOT_MASK,
BIT(JH7110_CLK_CPU_ROOT_SHIFT));
+ /* Set USB overcurrent overflow pin disable */
+ SYS_IOMUX_DIN_DISABLED(2);
+
ret = spl_board_init_f();
if (ret) {
debug("spl_board_init_f init failed: %d\n", ret);
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v5 6/8] configs: starfive: Add visionfive2 cadence USB configuration
2024-10-12 3:13 [PATCH v5 0/8] Add Starfive JH7110 Cadence USB driver Minda Chen
` (4 preceding siblings ...)
2024-10-12 3:13 ` [PATCH v5 5/8] spl: starfive: visionfive2: Disable USB overcurrent pin by default Minda Chen
@ 2024-10-12 3:13 ` Minda Chen
2024-10-12 3:13 ` [PATCH v5 7/8] dts: starfive: Add JH7110 Cadence USB dts node Minda Chen
` (2 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Minda Chen @ 2024-10-12 3:13 UTC (permalink / raw)
To: Marek Vasut, Tom Rini, Roger Quadros, Rick Chen, Leo,
Neil Armstrong, Alexey Romanov, Sumit Garg, Mark Kettenis,
Nishanth Menon
Cc: u-boot, Heinrich Schuchardt, Simon Glass, E Shattow, Minda Chen
Add cadence USB confiuration.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
---
configs/starfive_visionfive2_defconfig | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/configs/starfive_visionfive2_defconfig b/configs/starfive_visionfive2_defconfig
index 174ac24dc74..4329c8705ec 100644
--- a/configs/starfive_visionfive2_defconfig
+++ b/configs/starfive_visionfive2_defconfig
@@ -69,6 +69,7 @@ CONFIG_SYS_EEPROM_SIZE=512
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_BIND is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_PCI=y
CONFIG_CMD_USB=y
@@ -112,6 +113,9 @@ CONFIG_NVME_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCI_REGION_MULTI_ENTRY=y
CONFIG_PCIE_STARFIVE_JH7110=y
+CONFIG_PHY=y
+CONFIG_PHY_STARFIVE_JH7110_PCIE=y
+CONFIG_PHY_STARFIVE_JH7110_USB2=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_SPL_PINCTRL=y
@@ -127,13 +131,19 @@ CONFIG_CADENCE_QSPI=y
CONFIG_SYSRESET=y
CONFIG_TIMER_EARLY=y
CONFIG_USB=y
+CONFIG_DM_USB_GADGET=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_PCI=y
+CONFIG_USB_CDNS3=y
+CONFIG_USB_CDNS3_GADGET=y
+CONFIG_USB_CDNS3_HOST=y
+# CONFIG_USB_CDNS3_TI is not set
CONFIG_USB_KEYBOARD=y
+CONFIG_USB_GADGET=y
# CONFIG_WATCHDOG is not set
# CONFIG_WATCHDOG_AUTOSTART is not set
CONFIG_WDT=y
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v5 7/8] dts: starfive: Add JH7110 Cadence USB dts node
2024-10-12 3:13 [PATCH v5 0/8] Add Starfive JH7110 Cadence USB driver Minda Chen
` (5 preceding siblings ...)
2024-10-12 3:13 ` [PATCH v5 6/8] configs: starfive: Add visionfive2 cadence USB configuration Minda Chen
@ 2024-10-12 3:13 ` Minda Chen
2024-12-16 7:31 ` E Shattow
2024-10-12 3:13 ` [PATCH v5 8/8] MAINTAINERS: Update Starfive visionfive2 maintain files Minda Chen
2024-11-22 8:16 ` [PATCH v5 0/8] Add Starfive JH7110 Cadence USB driver E Shattow
8 siblings, 1 reply; 14+ messages in thread
From: Minda Chen @ 2024-10-12 3:13 UTC (permalink / raw)
To: Marek Vasut, Tom Rini, Roger Quadros, Rick Chen, Leo,
Neil Armstrong, Alexey Romanov, Sumit Garg, Mark Kettenis,
Nishanth Menon
Cc: u-boot, Heinrich Schuchardt, Simon Glass, E Shattow, Minda Chen
Add Jh7110 Cadence USB dts node, Visionfive2 default setting
is USB 2.0 device.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
---
.../dts/jh7110-starfive-visionfive-2.dtsi | 5 ++
arch/riscv/dts/jh7110.dtsi | 53 +++++++++++++++++++
2 files changed, 58 insertions(+)
diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
index e11babc1cde..f62582cf93e 100644
--- a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
@@ -378,3 +378,8 @@
};
};
};
+
+&usb0 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
diff --git a/arch/riscv/dts/jh7110.dtsi b/arch/riscv/dts/jh7110.dtsi
index 2cdc683d49b..c770da2fedd 100644
--- a/arch/riscv/dts/jh7110.dtsi
+++ b/arch/riscv/dts/jh7110.dtsi
@@ -371,6 +371,59 @@
status = "disabled";
};
+ usb0: usb@10100000 {
+ compatible = "starfive,jh7110-usb";
+ ranges = <0x0 0x0 0x10100000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ starfive,stg-syscon = <&stg_syscon 0x4>;
+ clocks = <&stgcrg JH7110_STGCLK_USB_LPM>,
+ <&stgcrg JH7110_STGCLK_USB_STB>,
+ <&stgcrg JH7110_STGCLK_USB_APB>,
+ <&stgcrg JH7110_STGCLK_USB_AXI>,
+ <&stgcrg JH7110_STGCLK_USB_UTMI_APB>;
+ clock-names = "lpm", "stb", "apb", "axi", "utmi_apb";
+ resets = <&stgcrg JH7110_STGRST_USB_PWRUP>,
+ <&stgcrg JH7110_STGRST_USB_APB>,
+ <&stgcrg JH7110_STGRST_USB_AXI>,
+ <&stgcrg JH7110_STGRST_USB_UTMI_APB>;
+ reset-names = "pwrup", "apb", "axi", "utmi_apb";
+ status = "disabled";
+
+ usb_cdns3: usb@0 {
+ compatible = "cdns,usb3";
+ reg = <0x0 0x10000>,
+ <0x10000 0x10000>,
+ <0x20000 0x10000>;
+ reg-names = "otg", "xhci", "dev";
+ interrupts = <100>, <108>, <110>;
+ interrupt-names = "host", "peripheral", "otg";
+ phys = <&usbphy0>;
+ phy-names = "cdns3,usb2-phy";
+ };
+ };
+
+ usbphy0: phy@10200000 {
+ compatible = "starfive,jh7110-usb-phy";
+ reg = <0x0 0x10200000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_USB_125M>,
+ <&stgcrg JH7110_STGCLK_USB_APP_125>;
+ clock-names = "125m", "app_125m";
+ #phy-cells = <0>;
+ };
+
+ pciephy0: phy@10210000 {
+ compatible = "starfive,jh7110-pcie-phy";
+ reg = <0x0 0x10210000 0x0 0x10000>;
+ #phy-cells = <0>;
+ };
+
+ pciephy1: phy@10220000 {
+ compatible = "starfive,jh7110-pcie-phy";
+ reg = <0x0 0x10220000 0x0 0x10000>;
+ #phy-cells = <0>;
+ };
+
stgcrg: clock-controller@10230000 {
compatible = "starfive,jh7110-stgcrg";
reg = <0x0 0x10230000 0x0 0x10000>;
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH v5 7/8] dts: starfive: Add JH7110 Cadence USB dts node
2024-10-12 3:13 ` [PATCH v5 7/8] dts: starfive: Add JH7110 Cadence USB dts node Minda Chen
@ 2024-12-16 7:31 ` E Shattow
0 siblings, 0 replies; 14+ messages in thread
From: E Shattow @ 2024-12-16 7:31 UTC (permalink / raw)
To: Minda Chen, Marek Vasut, Tom Rini, Roger Quadros, Rick Chen, Leo,
Neil Armstrong, Alexey Romanov, Sumit Garg, Mark Kettenis,
Nishanth Menon
Cc: u-boot, Heinrich Schuchardt, Simon Glass, E Shattow
On 10/11/24 20:13, Minda Chen wrote:
> Add Jh7110 Cadence USB dts node, Visionfive2 default setting
> is USB 2.0 device.
>
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> ---
> .../dts/jh7110-starfive-visionfive-2.dtsi | 5 ++
> arch/riscv/dts/jh7110.dtsi | 53 +++++++++++++++++++
> 2 files changed, 58 insertions(+)
>
> diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
> index e11babc1cde..f62582cf93e 100644
> --- a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
> +++ b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
> @@ -378,3 +378,8 @@
> };
> };
> };
> +
> +&usb0 {
> + dr_mode = "peripheral";
> + status = "okay";
> +};
> diff --git a/arch/riscv/dts/jh7110.dtsi b/arch/riscv/dts/jh7110.dtsi
> index 2cdc683d49b..c770da2fedd 100644
> --- a/arch/riscv/dts/jh7110.dtsi
> +++ b/arch/riscv/dts/jh7110.dtsi
> @@ -371,6 +371,59 @@
> status = "disabled";
> };
>
> + usb0: usb@10100000 {
> + compatible = "starfive,jh7110-usb";
> + ranges = <0x0 0x0 0x10100000 0x100000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + starfive,stg-syscon = <&stg_syscon 0x4>;
> + clocks = <&stgcrg JH7110_STGCLK_USB_LPM>,
> + <&stgcrg JH7110_STGCLK_USB_STB>,
> + <&stgcrg JH7110_STGCLK_USB_APB>,
> + <&stgcrg JH7110_STGCLK_USB_AXI>,
> + <&stgcrg JH7110_STGCLK_USB_UTMI_APB>;
> + clock-names = "lpm", "stb", "apb", "axi", "utmi_apb";
> + resets = <&stgcrg JH7110_STGRST_USB_PWRUP>,
> + <&stgcrg JH7110_STGRST_USB_APB>,
> + <&stgcrg JH7110_STGRST_USB_AXI>,
> + <&stgcrg JH7110_STGRST_USB_UTMI_APB>;
> + reset-names = "pwrup", "apb", "axi", "utmi_apb";
> + status = "disabled";
> +
> + usb_cdns3: usb@0 {
> + compatible = "cdns,usb3";
> + reg = <0x0 0x10000>,
> + <0x10000 0x10000>,
> + <0x20000 0x10000>;
> + reg-names = "otg", "xhci", "dev";
> + interrupts = <100>, <108>, <110>;
> + interrupt-names = "host", "peripheral", "otg";
> + phys = <&usbphy0>;
> + phy-names = "cdns3,usb2-phy";
> + };
> + };
> +
> + usbphy0: phy@10200000 {
> + compatible = "starfive,jh7110-usb-phy";
> + reg = <0x0 0x10200000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_USB_125M>,
> + <&stgcrg JH7110_STGCLK_USB_APP_125>;
> + clock-names = "125m", "app_125m";
> + #phy-cells = <0>;
> + };
> +
> + pciephy0: phy@10210000 {
> + compatible = "starfive,jh7110-pcie-phy";
> + reg = <0x0 0x10210000 0x0 0x10000>;
> + #phy-cells = <0>;
> + };
> +
> + pciephy1: phy@10220000 {
> + compatible = "starfive,jh7110-pcie-phy";
> + reg = <0x0 0x10220000 0x0 0x10000>;
> + #phy-cells = <0>;
> + };
> +
> stgcrg: clock-controller@10230000 {
> compatible = "starfive,jh7110-stgcrg";
> reg = <0x0 0x10230000 0x0 0x10000>;
Drop this patch. Prefer instead to depend on "Support OF_UPSTREAM for
StarFive JH7110" series. I have a couple of patches into upstream Linux
riscv-dt-for-next with the vbus GPIO assignment and setting host mode
that should land with Linux 6.14, for Mars and for Star64 boards.
-E
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v5 8/8] MAINTAINERS: Update Starfive visionfive2 maintain files.
2024-10-12 3:13 [PATCH v5 0/8] Add Starfive JH7110 Cadence USB driver Minda Chen
` (6 preceding siblings ...)
2024-10-12 3:13 ` [PATCH v5 7/8] dts: starfive: Add JH7110 Cadence USB dts node Minda Chen
@ 2024-10-12 3:13 ` Minda Chen
2024-11-22 8:16 ` [PATCH v5 0/8] Add Starfive JH7110 Cadence USB driver E Shattow
8 siblings, 0 replies; 14+ messages in thread
From: Minda Chen @ 2024-10-12 3:13 UTC (permalink / raw)
To: Marek Vasut, Tom Rini, Roger Quadros, Rick Chen, Leo,
Neil Armstrong, Alexey Romanov, Sumit Garg, Mark Kettenis,
Nishanth Menon
Cc: u-boot, Heinrich Schuchardt, Simon Glass, E Shattow, Minda Chen
Add USB related files to Starfive visionfive2 MAINTAINERS.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Marek Vasut <marex@denx.de>
---
board/starfive/visionfive2/MAINTAINERS | 2 ++
1 file changed, 2 insertions(+)
diff --git a/board/starfive/visionfive2/MAINTAINERS b/board/starfive/visionfive2/MAINTAINERS
index d7f638f9b41..1faf83f581c 100644
--- a/board/starfive/visionfive2/MAINTAINERS
+++ b/board/starfive/visionfive2/MAINTAINERS
@@ -6,3 +6,5 @@ F: board/starfive/visionfive2/
F: include/configs/starfive-visionfive2.h
F: configs/starfive_visionfive2_defconfig
F: drivers/pci/pcie_starfive_jh7110.c
+F: drivers/phy/starfive/
+F: drivers/usb/cdns3/cdns3-starfive.c
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH v5 0/8] Add Starfive JH7110 Cadence USB driver
2024-10-12 3:13 [PATCH v5 0/8] Add Starfive JH7110 Cadence USB driver Minda Chen
` (7 preceding siblings ...)
2024-10-12 3:13 ` [PATCH v5 8/8] MAINTAINERS: Update Starfive visionfive2 maintain files Minda Chen
@ 2024-11-22 8:16 ` E Shattow
8 siblings, 0 replies; 14+ messages in thread
From: E Shattow @ 2024-11-22 8:16 UTC (permalink / raw)
To: Minda Chen
Cc: Marek Vasut, Tom Rini, Roger Quadros, Rick Chen, Leo,
Neil Armstrong, Alexey Romanov, Sumit Garg, Mark Kettenis,
Nishanth Menon, u-boot, Heinrich Schuchardt, Simon Glass
On Fri, Oct 11, 2024 at 8:13 PM Minda Chen <minda.chen@starfivetech.com> wrote:
>
> Add Starfive JH7110 Cadence USB driver and related PHY driver.
> So the codes can be used in visionfive2 and star64 7110 board.
>
> The driver is almost the same with kernel driver.
>
> Test with Star64 JH7110 board USB 3.0 + USB 2.0 host.
> The code can work.
>
> - Star64 using USB 3.0 and USB 2.0 host must add below board dts setting.
> (Vbus bin setting. If usb host in Other JH7110 board vbus pin is not GPIO,
> don't require to set this)
>
> 1. usb pin setting
> usb_pins: usb0-0 {
> driver-vbus-pin {
> pinmux = <GPIOMUX(25, GPOUT_SYS_USB_DRIVE_VBUS,
> GPOEN_ENABLE,
> GPI_NONE)>;
> bias-disable;
> input-disable;
> input-schmitt-disable;
> slew-rate = <0>;
> };
> };
>
> 2. related dts node setting(USB 3.0 host)
> &pcie0 {
> status = "disabled";
> };
>
> &pciephy0 {
> starfive,sys-syscon = <&sys_syscon>;
> starfive,stg-syscon = <&stg_syscon 0x148 0x1f4>;
> status = "okay";
> };
>
> &usb0 {
> pinctrl-names = "default";
> pinctrl-0 = <&usb_pins>;
> dr_mode = "host";
> status = "okay";
> };
>
> &usb_cdns3 {
> phys = <&usbphy0>, <&pciephy0>;
> phy-names = "cdns3,usb2-phy", "cdns3,usb3-phy";
> };
>
> - If other board is USB 2.0 host, Just set dr mode is OKay.
> &usb0 {
> dr_mode = "host";
> status = "okay";
> };
>
> - previous version
> v1: https://patchwork.ozlabs.org/project/uboot/cover/20240504150358.19600-1-minda.chen@starfivetech.com/
> v2: https://patchwork.ozlabs.org/project/uboot/cover/20240704055014.55117-1-minda.chen@starfivetech.com/
> v3: https://patchwork.ozlabs.org/project/uboot/cover/20240719013822.101374-1-minda.chen@starfivetech.com/
> v4: https://patchwork.ozlabs.org/project/uboot/cover/20240829013058.6178-1-minda.chen@starfivetech.com/
>
> - patch description.
>
> patch1: Add set phy mode function in cdns3 core driver
> which is used by Starfive JH7110.
> patch2-3: USB and PCIe 2.0 (usb 3.0) PHY drivier
> patch4: Cadence USB wrapper driver.
> patch5: Add JH7110 USB default overcurrent pin.
> patch6-7 dts, config update.
> patch8: MAINTAINERS update
>
> - change:
> v5:
> - patch 2-4 format changed.
> - For pareparing enable OF_UPSTREAM, patch4 get the dr mode
> from parent device dts node not the cdns core device dts.
> - patch2 add a common usb syscon setting headfile.
> - delete v4 patch8 and the star64 dts setting can be setting
> int star64 board dts configuration if the OF_UPSTREAM is
> enable.
> v4:
> - patch 2 Add usb split setting, default set USB 2.0 only.
> - patch 5 move to spl stage.
> - Add a new patch 8 for star64 board usb host, vbus pin setting
> and usb 3.0
> v3:
> - patch 1 Move the added code to cdns3_drd_update_mode().
> - patch 1-4 correct the code format.(follow Rogers's comments.)
> - patch 3 using regmap_field.
>
> v2:
> - patch 1 Move the added code to cdns3_core_init_role(). Must
> set PHY mode before calling cdns3 role start function.
> - patch 1-4 correct the code format.(follow Marek's comments.)
> - patch 2 Add set 125M clock in PHY init function.
> - Add new patch5.
>
>
> Minda Chen (8):
> usb: cdns3: Set USB PHY mode in cdns3_drd_update_mode()
> phy: starfive: Add Starfive JH7110 USB 2.0 PHY driver
> phy: starfive: Add Starfive JH7110 PCIe 2.0 PHY driver
> usb: cdns: starfive: Add cdns USB driver
> spl: starfive: visionfive2: Disable USB overcurrent pin by default.
> configs: starfive: Add visionfive2 cadence USB configuration
> dts: starfive: Add JH7110 Cadence USB dts node
> MAINTAINERS: Update Starfive visionfive2 maintain files.
>
> .../dts/jh7110-starfive-visionfive-2.dtsi | 5 +
> arch/riscv/dts/jh7110.dtsi | 53 ++++
> arch/riscv/include/asm/arch-jh7110/gpio.h | 5 +
> board/starfive/visionfive2/MAINTAINERS | 2 +
> board/starfive/visionfive2/spl.c | 3 +
> configs/starfive_visionfive2_defconfig | 10 +
> drivers/phy/Kconfig | 1 +
> drivers/phy/Makefile | 1 +
> drivers/phy/starfive/Kconfig | 21 ++
> drivers/phy/starfive/Makefile | 7 +
> drivers/phy/starfive/phy-jh7110-pcie.c | 239 ++++++++++++++++++
> drivers/phy/starfive/phy-jh7110-usb-syscon.h | 9 +
> drivers/phy/starfive/phy-jh7110-usb2.c | 162 ++++++++++++
> drivers/usb/cdns3/Kconfig | 7 +
> drivers/usb/cdns3/Makefile | 2 +
> drivers/usb/cdns3/cdns3-starfive.c | 183 ++++++++++++++
> drivers/usb/cdns3/core.c | 3 +
> drivers/usb/cdns3/drd.c | 14 +
> 18 files changed, 727 insertions(+)
> create mode 100644 drivers/phy/starfive/Kconfig
> create mode 100644 drivers/phy/starfive/Makefile
> create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c
> create mode 100644 drivers/phy/starfive/phy-jh7110-usb-syscon.h
> create mode 100644 drivers/phy/starfive/phy-jh7110-usb2.c
> create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
>
>
> base-commit: c530f6079c70219e01022142b404bf8a6b572366
> --
> 2.17.1
>
Hi Minda,
Can you please depend on series "Support OF_UPSTREAM for StarFive
JH7110", and with changes requested by Marek?
Also I have patches for review on Linux kernel mailing list to provide
some of the dts nodes we will need to allow host USB mode on Star64
and Mars:
"riscv: dts: starfive: jh7110-pine64-star64: enable usb0 host function"
"riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function"
This can allow your series to apply on U-Boot without extra dts?
Thanks,
-E
^ permalink raw reply [flat|nested] 14+ messages in thread