From: Wadim Egorov <w.egorov@phytec.de>
To: <u-boot@lists.denx.de>, <upstream@lists.phytec.de>
Cc: <trini@konsulko.com>, <ggiordano@phytec.com>,
<d.schultz@phytec.de>, <afd@ti.com>, <n-francis@ti.com>,
<nmorrisson@phytec.com>, <vigneshr@ti.com>, <s-k6@ti.com>,
<dannenberg@ti.com>, <bb@ti.com>
Subject: [PATCH 0/8] *** Add Ethernet boot support for AM62Ax + phyCORE-AM62 SoMs ***
Date: Tue, 25 Mar 2025 04:58:16 +0100 [thread overview]
Message-ID: <20250325035824.2304200-1-w.egorov@phytec.de> (raw)
Add general ethernet boot support for AM62Ax SoC.
Some of the work is based on TI's downstream u-boot patches found in
[1], patches touching code in mach-k3 and *.yaml board config files.
Also, provide defconfigs and device tree changes for phyCORE-AM62x and
phyCORE-AM62Ax to support booting via ethernet.
[1] https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1307981/sk-am62a-lp-rgmii-boot-mode-problem
Andreas Dannenberg (1):
arch: arm: mach-k3: r5: am62ax: Update SoC auto-gen data to enable
CPSW boot
Daniel Schultz (1):
arch: arm: dts: k3-am62a7-phyboard-lyra-rdk-u-boot: Disable Ethernet2
Nathan Morrisson (2):
arch: arm: mach-k3: am62a7: Probe CPSW NUSS in board_init_f()
board: phytec: phycore_am62ax: Share ethernet resources with boot r5
core
Wadim Egorov (4):
arm: dts: k3-am625-phyboard-lyra-rdk: Add boot phase tag to
phy_gmii_sel
configs: Add phycore_am62x_r5_ethboot_defconfig
configs: phycore_am62x_a53_defconfig: Update for ethernet boot
configs: Add phycore_am62ax_r5_ethboot_defconfig
.../k3-am625-phyboard-lyra-rdk-u-boot.dtsi | 14 ++---
.../k3-am62a7-phyboard-lyra-rdk-u-boot.dtsi | 2 +-
arch/arm/mach-k3/am62ax/am62a7_init.c | 9 ++++
arch/arm/mach-k3/r5/am62ax/clk-data.c | 51 ++++++++++++++++++-
arch/arm/mach-k3/r5/am62ax/dev-data.c | 29 ++++++-----
board/phytec/phycore_am62ax/MAINTAINERS | 1 +
board/phytec/phycore_am62ax/rm-cfg.yaml | 10 ++--
board/phytec/phycore_am62ax/tifs-rm-cfg.yaml | 48 +++++++++--------
board/phytec/phycore_am62x/MAINTAINERS | 1 +
configs/phycore_am62ax_r5_ethboot_defconfig | 43 ++++++++++++++++
configs/phycore_am62x_a53_defconfig | 9 +++-
configs/phycore_am62x_r5_ethboot_defconfig | 43 ++++++++++++++++
12 files changed, 206 insertions(+), 54 deletions(-)
create mode 100644 configs/phycore_am62ax_r5_ethboot_defconfig
create mode 100644 configs/phycore_am62x_r5_ethboot_defconfig
--
2.34.1
next reply other threads:[~2025-03-25 3:58 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-25 3:58 Wadim Egorov [this message]
2025-03-25 3:58 ` [PATCH 1/8] arm: dts: k3-am625-phyboard-lyra-rdk: Add boot phase tag to phy_gmii_sel Wadim Egorov
2025-03-27 14:03 ` Daniel Schultz
2025-03-25 3:58 ` [PATCH 2/8] configs: Add phycore_am62x_r5_ethboot_defconfig Wadim Egorov
2025-03-25 3:58 ` [PATCH 3/8] configs: phycore_am62x_a53_defconfig: Update for ethernet boot Wadim Egorov
2025-03-25 3:58 ` [PATCH 4/8] arch: arm: dts: k3-am62a7-phyboard-lyra-rdk-u-boot: Disable Ethernet2 Wadim Egorov
2025-03-25 3:58 ` [PATCH 5/8] arch: arm: mach-k3: am62a7: Probe CPSW NUSS in board_init_f() Wadim Egorov
2025-03-25 3:58 ` [PATCH 6/8] arch: arm: mach-k3: r5: am62ax: Update SoC auto-gen data to enable CPSW boot Wadim Egorov
2025-03-25 3:58 ` [PATCH 7/8] board: phytec: phycore_am62ax: Share ethernet resources with boot r5 core Wadim Egorov
2025-03-25 3:58 ` [PATCH 8/8] configs: Add phycore_am62ax_r5_ethboot_defconfig Wadim Egorov
2025-04-10 22:16 ` [PATCH 0/8] *** Add Ethernet boot support for AM62Ax + phyCORE-AM62 SoMs *** Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250325035824.2304200-1-w.egorov@phytec.de \
--to=w.egorov@phytec.de \
--cc=afd@ti.com \
--cc=bb@ti.com \
--cc=d.schultz@phytec.de \
--cc=dannenberg@ti.com \
--cc=ggiordano@phytec.com \
--cc=n-francis@ti.com \
--cc=nmorrisson@phytec.com \
--cc=s-k6@ti.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=upstream@lists.phytec.de \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox