[PATCH 10/14] spi: Introduce setup_for_spinand()

[Christian Marangi <ansuelsmth@gmail.com>]

A common device attached to SPI are SPI NAND and some device might
require to have info on the attached NAND to know the flash page size
and spare size.

To support this, introduce setup_for_spinand() that pass the attached
spinand info from manufacturer.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 include/spi.h | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/include/spi.h b/include/spi.h
index 6944773b596..28f127feca5 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -10,6 +10,7 @@
 #define _SPI_H_
 
 #include <linux/bitops.h>
+#include <linux/mtd/spinand.h>
 
 /* SPI mode flags */
 #define SPI_CPHA	BIT(0)	/* clock phase (1 = SPI_CLOCK_PHASE_SECOND) */
@@ -537,6 +538,16 @@ struct dm_spi_ops {
 	 */
 	int (*get_mmap)(struct udevice *dev, ulong *map_basep,
 			uint *map_sizep, uint *offsetp);
+
+	/**
+	 * setup_for_spinand() - Setup the SPI for attached SPI NAND
+	 *
+	 * @dev:	The SPI flash slave device
+	 * @spinand_info: The SPI NAND info to configure for
+	 * @return 0 if OK, -ve value on error
+	 */
+	int (*setup_for_spinand)(struct spi_slave *slave,
+				 const struct spinand_info *spinand_info);
 };
 
 struct dm_spi_emul_ops {
-- 
2.48.1