[PATCH 1/5] mmc: am654_sdhci: Add MMC_HS_52 to timing data

[Judith Mendez <jm@ti.com>]

This patch adds MMC_HS_52 to the timing data structure.

Previously, this bus mode tap settings were not populated and
were instead populated for MMC_HS which is a different bus mode
up to 26MHz. Since we intended these settings according to the
device data sheet[0] for MMC_HS_52 up to 52MHz, populate MMC_HS
tap settings for MMC_HS_52.

While we are here, fix typo in ti,itap-del-sel-mms-hs.

[0] https://www.ti.com/lit/ds/symlink/am625.pdf Table 7-79
Signed-off-by: Judith Mendez <jm@ti.com>
---
 drivers/mmc/am654_sdhci.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/am654_sdhci.c b/drivers/mmc/am654_sdhci.c
index b4c60a48d2e..e4fa8a88565 100644
--- a/drivers/mmc/am654_sdhci.c
+++ b/drivers/mmc/am654_sdhci.c
@@ -125,12 +125,15 @@ static const struct timing_data td[] = {
 	[MMC_LEGACY]	= {"ti,otap-del-sel-legacy",
 			   "ti,itap-del-sel-legacy",
 			   0},
-	[MMC_HS]	= {"ti,otap-del-sel-mmc-hs",
-			   "ti,itap-del-sel-mms-hs",
+	[MMC_HS]	= {"ti,otap-del-sel-mmc-hs26",
+			   "ti,itap-del-sel-mmc-hs26",
 			   MMC_CAP(MMC_HS)},
 	[SD_HS]		= {"ti,otap-del-sel-sd-hs",
 			   "ti,itap-del-sel-sd-hs",
 			   MMC_CAP(SD_HS)},
+	[MMC_HS_52]	= {"ti,otap-del-sel-mmc-hs",
+			   "ti,itap-del-sel-mmc-hs",
+			   MMC_CAP(MMC_HS_52)},
 	[UHS_SDR12]	= {"ti,otap-del-sel-sdr12",
 			   "ti,itap-del-sel-sdr12",
 			   MMC_CAP(UHS_SDR12)},
-- 
2.49.0