From: Philip Oberfichtner <pro@denx.de>
To: u-boot@lists.denx.de
Cc: Philip Oberfichtner <pro@denx.de>,
Andre Przywara <andre.przywara@arm.com>,
Anshul Dalal <anshuld@ti.com>,
Dario Binacchi <dario.binacchi@amarulasolutions.com>,
Gary Bisson <bisson.gary@gmail.com>,
Greg Malysa <malysagreg@gmail.com>,
Heinrich Schuchardt <heinrich.schuchardt@canonical.com>,
Ilias Apalodimas <ilias.apalodimas@linaro.org>,
Jerome Forissier <jerome.forissier@linaro.org>,
Marek Vasut <marex@denx.de>,
Nathan Barrett-Morrison <nathan.morrison@timesys.com>,
Oliver Gaskell <Oliver.Gaskell@analog.com>,
Paul Barker <paul.barker.ct@bp.renesas.com>,
Paul Kocialkowski <contact@paulk.fr>, Peng Fan <peng.fan@nxp.com>,
Quentin Schulz <quentin.schulz@cherry.de>,
Simon Glass <sjg@chromium.org>, Tom Rini <trini@konsulko.com>,
Trevor Woerner <twoerner@gmail.com>, Ye Li <ye.li@nxp.com>
Subject: [RFC PATCH v1 1/3] Image size checks: Simplify Makefile rules
Date: Thu, 31 Jul 2025 13:40:42 +0200 [thread overview]
Message-ID: <20250731114044.264745-2-pro@denx.de> (raw)
In-Reply-To: <20250731114044.264745-1-pro@denx.de>
Deduplicate some of the size check code within the toplevel Makefile.
No functional changes.
Signed-off-by: Philip Oberfichtner <pro@denx.de>
---
Makefile | 44 ++++++++++--------------------------------
tools/spl_size_limit.c | 2 +-
2 files changed, 11 insertions(+), 35 deletions(-)
diff --git a/Makefile b/Makefile
index c31bf7ecea9..aefa44c327f 100644
--- a/Makefile
+++ b/Makefile
@@ -432,7 +432,7 @@ KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
define size_check
actual=$$( wc -c $1 | awk '{print $$1}'); \
limit=$$( printf "%d" $2 ); \
- if test $$actual -gt $$limit; then \
+ if test $$limit -gt 0 && test $$actual -gt $$limit; then \
echo "$1 exceeds file size limit:" >&2; \
echo " limit: $$(printf %#x $$limit) bytes" >&2; \
echo " actual: $$(printf %#x $$actual) bytes" >&2; \
@@ -1103,30 +1103,6 @@ LDPPFLAGS += \
#########################################################################
#########################################################################
-ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
-BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
-else
-BOARD_SIZE_CHECK =
-endif
-
-ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0)
-SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
-else
-SPL_SIZE_CHECK =
-endif
-
-ifneq ($(CONFIG_TPL_SIZE_LIMIT),0x0)
-TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
-else
-TPL_SIZE_CHECK =
-endif
-
-ifneq ($(CONFIG_VPL_SIZE_LIMIT),0x0)
-VPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_VPL_SIZE_LIMIT))
-else
-VPL_SIZE_CHECK =
-endif
-
# Statically apply RELA-style relocations (currently arm64 only)
# This is useful for arm64 where static relocation needs to be performed on
# the raw binary, but certain simulators only accept an ELF file (but don't
@@ -1470,7 +1446,7 @@ endif
%.imx: $(IMX_DEPS) %.bin
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
- $(BOARD_SIZE_CHECK)
+ @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
%.vyb: %.imx
$(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
@@ -1571,12 +1547,12 @@ endif
u-boot-nodtb.bin: u-boot FORCE
$(call if_changed,objcopy_uboot)
- $(BOARD_SIZE_CHECK)
+ @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
u-boot.ldr: u-boot
$(CREATE_LDR_ENV)
$(LDR) -T $(CONFIG_LDR_CPU) -c $@ $< $(LDR_FLAGS)
- $(BOARD_SIZE_CHECK)
+ @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
# binman
# ---------------------------------------------------------------------------
@@ -1703,7 +1679,7 @@ u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \
,$(UBOOT_BIN)) FORCE
$(call if_changed,mkimage)
- $(BOARD_SIZE_CHECK)
+ @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
MKIMAGEFLAGS_u-boot.itb =
@@ -1718,12 +1694,12 @@ u-boot.itb: u-boot-nodtb.bin \
$(if $(CONFIG_MULTI_DTB_FIT),$(FINAL_DTB_CONTAINER)) \
$(U_BOOT_ITS) FORCE
$(call if_changed,mkfitimage)
- $(BOARD_SIZE_CHECK)
+ @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
endif
u-boot-with-spl.kwb: u-boot.bin spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
- $(BOARD_SIZE_CHECK)
+ @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
u-boot.dis: u-boot
$(OBJDUMP) -d $< > $@
@@ -2342,7 +2318,7 @@ u-boot.lds: $(LDSCRIPT) prepare FORCE
spl/u-boot-spl.bin: spl/u-boot-spl
@:
- $(SPL_SIZE_CHECK)
+ @$(call size_check,$@,$$(tools/spl_size_limit))
spl/u-boot-spl-dtb.bin: spl/u-boot-spl
@:
@@ -2367,14 +2343,14 @@ spl/boot.bin: spl/u-boot-spl
tpl/u-boot-tpl.bin: tpl/u-boot-tpl
@:
- $(TPL_SIZE_CHECK)
+ @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
tpl/u-boot-tpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb)
$(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.xpl all
vpl/u-boot-vpl.bin: vpl/u-boot-vpl
@:
- $(VPL_SIZE_CHECK)
+ @$(call size_check,$@,$(CONFIG_VPL_SIZE_LIMIT))
vpl/u-boot-vpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb)
$(Q)$(MAKE) obj=vpl -f $(srctree)/scripts/Makefile.xpl all
diff --git a/tools/spl_size_limit.c b/tools/spl_size_limit.c
index c6c139e834f..137f0fca898 100644
--- a/tools/spl_size_limit.c
+++ b/tools/spl_size_limit.c
@@ -28,6 +28,6 @@ int main(int argc, char *argv[])
#endif
#endif
- printf("%d", spl_size_limit);
+ printf("%d", spl_size_limit > 0 ? spl_size_limit : 0);
return 0;
}
--
2.39.5
next prev parent reply other threads:[~2025-07-31 11:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-31 11:40 [RFC PATCH v1 0/3] Simplify image size checks Philip Oberfichtner
2025-07-31 11:40 ` Philip Oberfichtner [this message]
2025-07-31 11:40 ` [RFC PATCH v1 2/3] Image size checks: Remove HAS_BOARD_SIZE_LIMIT Philip Oberfichtner
2025-07-31 12:09 ` Heinrich Schuchardt
2025-07-31 11:40 ` [RFC PATCH v1 3/3] Image size checks: Move all configs in one place Philip Oberfichtner
2025-07-31 12:14 ` Heinrich Schuchardt
2025-08-07 10:28 ` Philip Oberfichtner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250731114044.264745-2-pro@denx.de \
--to=pro@denx.de \
--cc=Oliver.Gaskell@analog.com \
--cc=andre.przywara@arm.com \
--cc=anshuld@ti.com \
--cc=bisson.gary@gmail.com \
--cc=contact@paulk.fr \
--cc=dario.binacchi@amarulasolutions.com \
--cc=heinrich.schuchardt@canonical.com \
--cc=ilias.apalodimas@linaro.org \
--cc=jerome.forissier@linaro.org \
--cc=malysagreg@gmail.com \
--cc=marex@denx.de \
--cc=nathan.morrison@timesys.com \
--cc=paul.barker.ct@bp.renesas.com \
--cc=peng.fan@nxp.com \
--cc=quentin.schulz@cherry.de \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=twoerner@gmail.com \
--cc=u-boot@lists.denx.de \
--cc=ye.li@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox