From: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
To: Tom Rini <trini@konsulko.com>,
Kamil Lulko <kamil.lulko@gmail.com>,
Patrice Chotard <patrice.chotard@foss.st.com>,
Dillon Min <dillon.minfei@gmail.com>,
Patrick Delaunay <patrick.delaunay@foss.st.com>,
Anatolij Gustschin <ag.dev.uboot@gmail.com>,
Simon Glass <sjg@chromium.org>,
Sumit Garg <sumit.garg@kernel.org>,
Philippe Cornu <philippe.cornu@foss.st.com>,
Yannick Fertre <yannick.fertre@foss.st.com>
Cc: <u-boot@lists.denx.de>, <uboot-stm32@st-md-mailman.stormreply.com>
Subject: [PATCH v3 4/7] video: stm32: ltdc: support new hardware version for STM32MP25 SoC
Date: Thu, 4 Sep 2025 14:53:08 +0200 [thread overview]
Message-ID: <20250904-master-v3-4-b42847884974@foss.st.com> (raw)
In-Reply-To: <20250904-master-v3-0-b42847884974@foss.st.com>
STM32MP2 SoCs feature a new version of the LTDC IP. This new version
features a bus clock, as well as a 150MHz pad frequency. Add its
compatible to the list of device to probe and handle quirks. The new
hardware version features a bus clock.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
drivers/video/stm32/stm32_ltdc.c | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/video/stm32/stm32_ltdc.c b/drivers/video/stm32/stm32_ltdc.c
index 0a062c8939dbe49b11aa50f5ca9701bdbe5c5b0b..efe9a00996eca0301d2a2b82074ba9690a967a73 100644
--- a/drivers/video/stm32/stm32_ltdc.c
+++ b/drivers/video/stm32/stm32_ltdc.c
@@ -262,6 +262,7 @@ static const u32 layer_regs_a2[] = {
#define HWVER_10300 0x010300
#define HWVER_20101 0x020101
#define HWVER_40100 0x040100
+#define HWVER_40101 0x040101
enum stm32_ltdc_pix_fmt {
PF_ARGB8888 = 0, /* ARGB [32 bits] */
@@ -529,7 +530,7 @@ static int stm32_ltdc_probe(struct udevice *dev)
struct udevice *bridge = NULL;
struct udevice *panel = NULL;
struct display_timing timings;
- struct clk pclk;
+ struct clk pclk, bclk;
struct reset_ctl rst;
ulong rate;
int ret;
@@ -540,7 +541,21 @@ static int stm32_ltdc_probe(struct udevice *dev)
return -EINVAL;
}
- ret = clk_get_by_index(dev, 0, &pclk);
+ ret = clk_get_by_name(dev, "bus", &bclk);
+ if (ret) {
+ if (ret != -ENODATA) {
+ dev_err(dev, "bus clock get error %d\n", ret);
+ return ret;
+ }
+ } else {
+ ret = clk_enable(&bclk);
+ if (ret) {
+ dev_err(dev, "bus clock enable error %d\n", ret);
+ return ret;
+ }
+ }
+
+ ret = clk_get_by_name(dev, "lcd", &pclk);
if (ret) {
dev_err(dev, "peripheral clock get error %d\n", ret);
return ret;
@@ -566,6 +581,7 @@ static int stm32_ltdc_probe(struct udevice *dev)
priv->pix_fmt_hw = pix_fmt_a1;
break;
case HWVER_40100:
+ case HWVER_40101:
priv->layer_regs = layer_regs_a2;
priv->pix_fmt_hw = pix_fmt_a2;
break;
@@ -688,6 +704,8 @@ static int stm32_ltdc_bind(struct udevice *dev)
static const struct udevice_id stm32_ltdc_ids[] = {
{ .compatible = "st,stm32-ltdc" },
+ { .compatible = "st,stm32mp251-ltdc" },
+ { .compatible = "st,stm32mp255-ltdc" },
{ }
};
--
2.25.1
next prev parent reply other threads:[~2025-09-04 12:53 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-04 12:53 [PATCH v3 0/7] Add display support for STM32MP25 Raphael Gallais-Pou
2025-09-04 12:53 ` [PATCH v3 1/7] ofnode: support panel-timings in ofnode_decode_display_timing Raphael Gallais-Pou
2025-10-30 7:35 ` Yannick FERTRE
2025-11-01 9:03 ` Simon Glass
2025-11-02 1:09 ` [Uboot-stm32] " Raphaël Gallais-Pou
2025-11-02 19:53 ` Simon Glass
2025-11-03 14:17 ` Tom Rini
2025-11-04 14:01 ` Raphael Gallais-Pou
2025-11-04 16:21 ` Tom Rini
2025-11-14 16:48 ` Patrice CHOTARD
2025-11-04 16:31 ` Simon Glass
2025-11-04 16:55 ` Tom Rini
2025-11-07 12:23 ` Simon Glass
2025-09-04 12:53 ` [PATCH v3 2/7] video: simple_panel: add support for "panel-lvds" display Raphael Gallais-Pou
2025-10-30 7:41 ` Yannick FERTRE
2025-11-14 16:48 ` Patrice CHOTARD
2025-09-04 12:53 ` [PATCH v3 3/7] video: stm32: STM32 driver support for LVDS Raphael Gallais-Pou
2025-10-30 7:42 ` Yannick FERTRE
2025-11-14 16:48 ` Patrice CHOTARD
2025-09-04 12:53 ` Raphael Gallais-Pou [this message]
2025-09-12 16:41 ` [PATCH v3 4/7] video: stm32: ltdc: support new hardware version for STM32MP25 SoC Patrice CHOTARD
2025-09-15 13:05 ` Raphael Gallais-Pou
2025-09-17 15:10 ` Patrice CHOTARD
2025-10-30 7:43 ` Yannick FERTRE
2025-11-14 16:49 ` Patrice CHOTARD
2025-09-04 12:53 ` [PATCH v3 5/7] video: stm32: ltdc: properly search the first available panel Raphael Gallais-Pou
2025-09-12 16:45 ` Patrice CHOTARD
2025-10-30 7:43 ` Yannick FERTRE
2025-11-14 16:49 ` Patrice CHOTARD
2025-09-04 12:53 ` [PATCH v3 6/7] ARM: dts: stm32: use LTDC and LVDS nodes before relocation in stm32mp25-u-boot Raphael Gallais-Pou
2025-09-12 16:45 ` Patrice CHOTARD
2025-10-30 7:43 ` Yannick FERTRE
2025-11-14 16:49 ` Patrice CHOTARD
2025-11-14 16:54 ` Patrice CHOTARD
2025-11-14 17:30 ` [Uboot-stm32] " Patrice CHOTARD
2025-09-04 12:53 ` [PATCH v3 7/7] configs: stm32mp25: enable LVDS display support Raphael Gallais-Pou
2025-09-12 16:46 ` Patrice CHOTARD
2025-10-30 7:44 ` Yannick FERTRE
2025-11-14 16:48 ` Patrice CHOTARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250904-master-v3-4-b42847884974@foss.st.com \
--to=raphael.gallais-pou@foss.st.com \
--cc=ag.dev.uboot@gmail.com \
--cc=dillon.minfei@gmail.com \
--cc=kamil.lulko@gmail.com \
--cc=patrice.chotard@foss.st.com \
--cc=patrick.delaunay@foss.st.com \
--cc=philippe.cornu@foss.st.com \
--cc=sjg@chromium.org \
--cc=sumit.garg@kernel.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=uboot-stm32@st-md-mailman.stormreply.com \
--cc=yannick.fertre@foss.st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).