[PATCH v2] misc: Add RZG2L OTP support

[PATCH v2] misc: Add RZG2L OTP support

[Mathieu Othacehe]

Add OTP support through the fuse command. Fusing is directly performed by
U-Boot, which means that the trusted-firmware must allow the non-secure
world to perform fusing operations.

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
---
Changelog
v2: Depend on CMD_FUSE. Use readl_poll_sleep_timeout and clrbits_le32 functions.

 drivers/misc/Kconfig     |   7 ++
 drivers/misc/Makefile    |   1 +
 drivers/misc/rzg2l_otp.c | 221 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 229 insertions(+)
 create mode 100644 drivers/misc/rzg2l_otp.c

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index ea785793d18..324a88c9494 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -132,6 +132,13 @@ config SPL_ROCKCHIP_IODOMAIN
 	  for the IO-domain setting of the SoC to match the voltage supplied
 	  by the regulators.
 
+config RZG2L_OTP
+	bool "Renesas RZ/G2L OTP support"
+	depends on MISC && CMD_FUSE
+	help
+	  Enable support for the OTP controller on
+	  Renesas RZ/G2L SoCs.
+
 config SIFIVE_OTP
 	bool "SiFive eMemory OTP driver"
 	depends on MISC
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index e2170212e5a..64b2701b672 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_QCOM_GENI) += qcom_geni.o
 obj-$(CONFIG_$(PHASE_)ROCKCHIP_EFUSE) += rockchip-efuse.o
 obj-$(CONFIG_$(PHASE_)ROCKCHIP_OTP) += rockchip-otp.o
 obj-$(CONFIG_$(PHASE_)ROCKCHIP_IODOMAIN) += rockchip-io-domain.o
+obj-$(CONFIG_RZG2L_OTP) += rzg2l_otp.o
 obj-$(CONFIG_SANDBOX) += syscon_sandbox.o misc_sandbox.o
 obj-$(CONFIG_SIFIVE_OTP) += sifive-otp.o
 obj-$(CONFIG_SMSC_LPC47M) += smsc_lpc47m.o
diff --git a/drivers/misc/rzg2l_otp.c b/drivers/misc/rzg2l_otp.c
new file mode 100644
index 00000000000..fe971bcb6c3
--- /dev/null
+++ b/drivers/misc/rzg2l_otp.c
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2026 Mathieu Othacehe <m.othacehe@gmail.com>
+ */
+#include <fuse.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+
+/*
+ * XXX: To enable direct fusing through U-Boot, the trusted-firmware must
+ * allow the non-secure world to perform fusing operations. This is controlled
+ * by the SYS_SLVACCCTL7 register.
+ */
+#define RZG2L_OTP_BASE      0x11860000
+#define RZG2L_SYSC_BASE     0x11020000
+
+#define RZ_SYS_BASE_DEVID   (RZG2L_SYSC_BASE + 0x0A04)
+#define RZ_OTP_BASE_DEVID   (RZG2L_OTP_BASE + 0x1178)
+#define RZ_OTP_BASE_CHIPID  (RZG2L_OTP_BASE + 0x1140)
+
+#define RZ_OTP_PWR          (RZG2L_OTP_BASE + 0x0000)
+#define RZ_OTP_STR          (RZG2L_OTP_BASE + 0x0004)
+#define RZ_OTP_STAWR        (RZG2L_OTP_BASE + 0x0008)
+#define RZ_OTP_ADRWR        (RZG2L_OTP_BASE + 0x000c)
+#define RZ_OTP_DATAWR       (RZG2L_OTP_BASE + 0x0010)
+
+#define RZ_OTP_ADRRD        (RZG2L_OTP_BASE + 0x0014)
+#define RZ_OTP_DATARD       (RZG2L_OTP_BASE + 0x0018)
+
+#define RZ_OTP_FLAG         (RZG2L_OTP_BASE + 0x001c)
+
+#define OTP_PWR		    BIT(0)
+#define OTP_RDY		    BIT(0)
+#define ERR_WR_1	    BIT(1)
+#define ERR_WR_2	    BIT(2)
+#define ERR_WP		    BIT(3)
+#define OTP_ACCL	    BIT(4)
+#define ERR_RDY_WR	    BIT(8)
+#define OTP_DUMMY_READ	    0x100
+
+#define RZ_OTP_POLL(reg, val, cond) \
+	readl_poll_sleep_timeout((reg), (val), (cond), 1000, 1000000)
+
+static int rzg2l_otp_open(void)
+{
+	u32 val;
+	int ret;
+
+	if (readl(RZ_OTP_PWR) & OTP_PWR) {
+		debug("OTP already powered up\n");
+		return 0;
+	}
+
+	ret = RZ_OTP_POLL(RZ_OTP_STR, val, !(val & OTP_RDY));
+	if (ret) {
+		printf("OTP power-up timeout\n");
+		return ret;
+	}
+
+	ret = RZ_OTP_POLL(RZ_OTP_FLAG, val, val & OTP_RDY);
+	if (ret) {
+		printf("OTP power-up timeout\n");
+		return ret;
+	}
+
+	writel(readl(RZ_OTP_PWR) | OTP_PWR | OTP_ACCL, RZ_OTP_PWR);
+
+	return 0;
+}
+
+static int rzg2l_otp_dummy_read(void)
+{
+	u32 val;
+	int ret;
+
+	ret = RZ_OTP_POLL(RZ_OTP_STR, val, val & OTP_RDY);
+	if (ret) {
+		printf("Timeout polling ready for OTP read\n");
+		return ret;
+	}
+
+	writel(RZG2L_OTP_BASE + OTP_DUMMY_READ, RZ_OTP_ADRRD);
+	readl(RZ_OTP_DATARD);
+
+	return 0;
+}
+
+static int rzg2l_otp_close(void)
+{
+	u32 val;
+	int ret;
+
+	rzg2l_otp_dummy_read();
+
+	clrbits_le32((void *)RZ_OTP_PWR, OTP_PWR | OTP_ACCL);
+
+	ret = RZ_OTP_POLL(RZ_OTP_STR, val, !(val & OTP_RDY));
+	if (ret) {
+		printf("Timeout leaving OTP ready state\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rzg2l_otp_read_word(u32 addr, u32 *val)
+{
+	u32 str;
+	int ret;
+
+	ret = rzg2l_otp_open();
+	if (ret < 0)
+		return ret;
+
+	ret = RZ_OTP_POLL(RZ_OTP_STR, str, str & OTP_RDY);
+	if (ret) {
+		printf("Timeout polling ready for OTP read\n");
+		rzg2l_otp_close();
+		return ret;
+	}
+
+	writel(addr, RZ_OTP_ADRRD);
+	*val = readl(RZ_OTP_DATARD);
+
+	ret = rzg2l_otp_close();
+
+	return ret;
+}
+
+static int rzg2l_otp_program_word(u32 addr, u32 val)
+{
+	u32 str, otpval;
+	int ret;
+
+	ret = rzg2l_otp_open();
+	if (ret < 0)
+		return ret;
+
+	ret = RZ_OTP_POLL(RZ_OTP_STR, str, str & OTP_RDY);
+	if (ret) {
+		printf("Timeout polling ready for OTP write\n");
+		goto close;
+	}
+
+	writel(addr, RZ_OTP_ADRWR);
+	writel(val, RZ_OTP_DATAWR);
+
+	writel(1, RZ_OTP_STAWR);
+
+	if (readl(RZ_OTP_STR) & ERR_RDY_WR) {
+		printf("OTP not ready for write\n");
+		writel(readl(RZ_OTP_STR) & ERR_RDY_WR, RZ_OTP_STR);
+		goto close;
+	}
+
+	ret = RZ_OTP_POLL(RZ_OTP_STR, str, str & OTP_RDY);
+	if (ret) {
+		printf("Timeout polling OTP write finished\n");
+		goto close;
+	}
+
+	ret = RZ_OTP_POLL(RZ_OTP_STAWR, str, !(str & OTP_RDY));
+	if (ret) {
+		printf("Timeout polling OTP write finished\n");
+		goto close;
+	}
+
+	if ((readl(RZ_OTP_STR) & ERR_WP) ||
+	    (readl(RZ_OTP_STR) & ERR_WR_1) ||
+	    (readl(RZ_OTP_STR) & ERR_WR_2)) {
+		printf("OTP write error (protected or invalid)\n");
+		goto close;
+	}
+
+	writel(addr, RZ_OTP_ADRRD);
+	otpval = readl(RZ_OTP_DATARD);
+
+	if (otpval != val) {
+		printf("OTP verify failed: wrote 0x%08x read 0x%08x\n",
+		       val, otpval);
+		goto close;
+	}
+
+close:
+	ret = rzg2l_otp_close();
+	return ret;
+}
+
+/* ---------------------------------------------------------------- */
+/* U-Boot fuse API */
+
+int fuse_read(u32 bank, u32 word, u32 *val)
+{
+	u32 addr;
+
+	addr = RZG2L_OTP_BASE + (word >> 2);
+
+	return rzg2l_otp_read_word(addr, val);
+}
+
+int fuse_prog(u32 bank, u32 word, u32 val)
+{
+	u32 addr;
+
+	addr = RZG2L_OTP_BASE + (word >> 2);
+
+	return rzg2l_otp_program_word(addr, val);
+}
+
+int fuse_sense(u32 bank, u32 word, u32 *val)
+{
+	/* not supported */
+	return -ENOSYS;
+}
+
+int fuse_override(u32 bank, u32 word, u32 val)
+{
+	/* not supported */
+	return -ENOSYS;
+}
-- 
2.52.0