From: Emanuele Ghidoli <ghidoliemanuele@gmail.com>
To: Francesco Dolcini <francesco.dolcini@toradex.com>,
Tom Rini <trini@konsulko.com>
Cc: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>, u-boot@lists.denx.de
Subject: [PATCH v1 2/2] board: toradex: aquila-am69: Fix memory size setup logic
Date: Tue, 21 Apr 2026 17:15:56 +0200 [thread overview]
Message-ID: <20260421151604.1141082-3-ghidoliemanuele@gmail.com> (raw)
In-Reply-To: <20260421151604.1141082-1-ghidoliemanuele@gmail.com>
From: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
The hardware configuration pins are used both to select the DDR
configuration and to determine the installed memory size.
On Aquila AM69, the DDR timing patch is applied in the R5 SPL, while the
memory size fixup for the next-stage U-Boot DT is done later in the A72
SPL path.
The previous immplementation was not taking in account that the hw_cfg
value is lost both during SPL execution (board_init_f and board_init_r)
and between SPL and U-Boot proper.
Fix this by reading the hardware configuration pins when the memory size
is actually needed:
- in the R5 SPL, to select the correct DDR configuration
- in the A72 SPL, to fix up the U-Boot DT memory size and bank layout
Fixes: 3f0528882c0d ("board: toradex: add aquila am69 support")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
---
board/toradex/aquila-am69/aquila-am69.c | 90 +++++++++++++++----------
1 file changed, 54 insertions(+), 36 deletions(-)
diff --git a/board/toradex/aquila-am69/aquila-am69.c b/board/toradex/aquila-am69/aquila-am69.c
index 0c7123a059e4..45fba1bbfe80 100644
--- a/board/toradex/aquila-am69/aquila-am69.c
+++ b/board/toradex/aquila-am69/aquila-am69.c
@@ -15,6 +15,7 @@
#include <i2c.h>
#include <linux/sizes.h>
#include <spl.h>
+#include <asm/arch/k3-ddr.h>
#include "../common/tdx-common.h"
#include "aquila_ddrs.h"
@@ -30,46 +31,24 @@
#define HW_CFG_MEM_CFG_MASK 0x03
DECLARE_GLOBAL_DATA_PTR;
-static u8 hw_cfg;
-static u8 aquila_am69_memory_cfg(void)
-{
- return hw_cfg & HW_CFG_MEM_CFG_MASK;
-}
-
-static u64 aquila_am69_memory_size(void)
-{
- switch (aquila_am69_memory_cfg()) {
- case HW_CFG_MEM_SZ_32GB:
- return SZ_32G;
- case HW_CFG_MEM_SZ_16GB_RANK_2:
- case HW_CFG_MEM_SZ_16GB:
- return SZ_16G;
- case HW_CFG_MEM_SZ_8GB:
- return SZ_8G;
- default:
- puts("Invalid memory size configuration\n");
- return -EINVAL;
- }
-}
-
-static void read_hw_cfg(void)
+static u8 get_hw_cfg(void)
{
struct gpio_desc gpio_hw_cfg;
char gpio_name[20];
+ u8 hw_cfg = 0;
int i;
- printf("HW CFG: ");
for (i = 0; i < 5; i++) {
sprintf(gpio_name, "gpio@42110000_%d", 82 + i);
if (dm_gpio_lookup_name(gpio_name, &gpio_hw_cfg) < 0) {
printf("Lookup named gpio error\n");
- return;
+ return 0;
}
if (dm_gpio_request(&gpio_hw_cfg, "hw_cfg")) {
printf("gpio request error\n");
- return;
+ return 0;
}
if (dm_gpio_get_value(&gpio_hw_cfg) == 1)
@@ -77,15 +56,34 @@ static void read_hw_cfg(void)
dm_gpio_free(NULL, &gpio_hw_cfg);
}
- printf("0x%02x\n", hw_cfg);
+ return hw_cfg;
}
-static void update_ddr_timings(void)
+static u64 aquila_am69_memory_size(void)
+{
+ u8 hw_cfg = get_hw_cfg();
+
+ switch (hw_cfg & HW_CFG_MEM_CFG_MASK) {
+ case HW_CFG_MEM_SZ_32GB:
+ return SZ_32G;
+ case HW_CFG_MEM_SZ_16GB_RANK_2:
+ case HW_CFG_MEM_SZ_16GB:
+ return SZ_16G;
+ case HW_CFG_MEM_SZ_8GB:
+ return SZ_8G;
+ default:
+ puts("Invalid memory size configuration\n");
+ return -EINVAL;
+ }
+}
+
+#if defined(CONFIG_TARGET_AQUILA_AM69_R5)
+static void update_ddr_timings(u8 hw_cfg)
{
int ret = 0;
void *fdt = (void *)gd->fdt_blob;
- switch (aquila_am69_memory_cfg()) {
+ switch (hw_cfg & HW_CFG_MEM_CFG_MASK) {
case HW_CFG_MEM_SZ_8GB:
ret = aquila_am69_fdt_apply_ddr_patch(fdt, aquila_am69_ddrss_patch_8GB,
MULTI_DDR_CFG_INTRLV_SIZE_8GB);
@@ -103,6 +101,7 @@ static void update_ddr_timings(void)
if (ret)
printf("Applying DDR patch error: %d\n", ret);
}
+#endif
static int aquila_am69_fdt_fixup_memory_size(u64 total_sz)
{
@@ -121,21 +120,33 @@ static int aquila_am69_fdt_fixup_memory_size(u64 total_sz)
return fdt_fixup_memory_banks(blob, s, e, CONFIG_NR_DRAM_BANKS);
}
+#if defined(CONFIG_TARGET_AQUILA_AM69_R5)
void do_board_detect(void)
{
+ u8 hw_cfg;
+
/* MCU_ADC1 pins used as General Purpose Inputs */
writel(readl(CTRL_MMR_CFG0_MCU_ADC1_CTRL) | BIT(16),
CTRL_MMR_CFG0_MCU_ADC1_CTRL);
- read_hw_cfg();
+ hw_cfg = get_hw_cfg();
+ printf("HW CFG: 0x%02x\n", hw_cfg);
if (IS_ENABLED(CONFIG_K3_DDRSS))
- update_ddr_timings();
+ update_ddr_timings(hw_cfg);
}
+#endif
+
+#if defined(CONFIG_XPL_BUILD)
+void spl_perform_board_fixups(struct spl_image_info *spl_image)
+{
+ fixup_memory_node(spl_image);
+}
+#endif
int dram_init(void)
{
- s32 ret;
+ int ret;
ret = fdtdec_setup_mem_size_base_lowest();
if (ret)
@@ -146,11 +157,18 @@ int dram_init(void)
int dram_init_banksize(void)
{
- s32 ret;
+ int ret;
- ret = aquila_am69_fdt_fixup_memory_size(aquila_am69_memory_size());
- if (ret)
- printf("Error setting memory size. %d\n", ret);
+ if (IS_ENABLED(CONFIG_SPL_BUILD) &&
+ IS_ENABLED(CONFIG_TARGET_AQUILA_AM69_A72)) {
+ u64 mem_sz = aquila_am69_memory_size();
+
+ ret = aquila_am69_fdt_fixup_memory_size(mem_sz);
+ if (ret)
+ printf("Error setting memory size. %d\n", ret);
+ } else {
+ fdtdec_setup_mem_size_base();
+ }
ret = fdtdec_setup_memory_banksize();
if (ret)
--
2.43.0
next prev parent reply other threads:[~2026-04-21 15:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-21 15:15 [PATCH v1 0/2] board: toradex: aquila-am69: Fix 16GB dual-rank DDR cfg and memory size detection Emanuele Ghidoli
2026-04-21 15:15 ` [PATCH v1 1/2] board: toradex: aquila-am69: Fix 16GB dual-rank DDR configuration Emanuele Ghidoli
2026-04-21 15:15 ` Emanuele Ghidoli [this message]
2026-04-21 15:41 ` [PATCH v1 0/2] board: toradex: aquila-am69: Fix 16GB dual-rank DDR cfg and memory size detection Francesco Dolcini
2026-04-27 19:42 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260421151604.1141082-3-ghidoliemanuele@gmail.com \
--to=ghidoliemanuele@gmail.com \
--cc=emanuele.ghidoli@toradex.com \
--cc=francesco.dolcini@toradex.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox