From: Michael Opdenacker <michael.opdenacker@rootcommit.com>
To: u-boot@lists.denx.de
Cc: Wei Fu <wefu@redhat.com>, Yixun Lan <dlan@gentoo.org>,
Tom Rini <trini@konsulko.com>,
Michael Opdenacker <michael.opdenacker@rootcommit.com>
Subject: [PATCH] doc: thead: lpi4a: detail how to enable fastboot
Date: Wed, 15 Jul 2026 17:04:04 +0200 [thread overview]
Message-ID: <20260715-improve-lpi4a-doc-v1-1-4cc045eb59bc@rootcommit.com> (raw)
Add that the "BOOT" button must be used
to switch the board to fastboot mode.
Signed-off-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
---
doc/board/thead/lpi4a.rst | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/doc/board/thead/lpi4a.rst b/doc/board/thead/lpi4a.rst
index acd7ac2698d..3920efcd710 100644
--- a/doc/board/thead/lpi4a.rst
+++ b/doc/board/thead/lpi4a.rst
@@ -91,8 +91,10 @@ OpenSBI firmware and proper U-Boot.
Booting
~~~~~~~
-u-boot-with-spl.bin should be loaded to SRAM through fastboot. Connect
-the board to computer with Type-C cable and run
+u-boot-with-spl.bin should be loaded to SRAM through fastboot.
+
+To put the board in fastboot mode, press and hold the ``BOOT`` button,
+connect the board to the computer with a Type-C cable, release ``BOOT`` and run:
.. code-block:: bash
---
base-commit: 8dbe57ba648648c4897717cebbc4505a8e0a8c23
change-id: 20260715-improve-lpi4a-doc-feed8191d37c
Best regards,
--
Michael Opdenacker <michael.opdenacker@rootcommit.com>
reply other threads:[~2026-07-15 15:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260715-improve-lpi4a-doc-v1-1-4cc045eb59bc@rootcommit.com \
--to=michael.opdenacker@rootcommit.com \
--cc=dlan@gentoo.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=wefu@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox