* [PATCH] doc: thead: lpi4a: detail how to enable fastboot
@ 2026-07-15 15:04 Michael Opdenacker
0 siblings, 0 replies; only message in thread
From: Michael Opdenacker @ 2026-07-15 15:04 UTC (permalink / raw)
To: u-boot; +Cc: Wei Fu, Yixun Lan, Tom Rini, Michael Opdenacker
Add that the "BOOT" button must be used
to switch the board to fastboot mode.
Signed-off-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
---
doc/board/thead/lpi4a.rst | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/doc/board/thead/lpi4a.rst b/doc/board/thead/lpi4a.rst
index acd7ac2698d..3920efcd710 100644
--- a/doc/board/thead/lpi4a.rst
+++ b/doc/board/thead/lpi4a.rst
@@ -91,8 +91,10 @@ OpenSBI firmware and proper U-Boot.
Booting
~~~~~~~
-u-boot-with-spl.bin should be loaded to SRAM through fastboot. Connect
-the board to computer with Type-C cable and run
+u-boot-with-spl.bin should be loaded to SRAM through fastboot.
+
+To put the board in fastboot mode, press and hold the ``BOOT`` button,
+connect the board to the computer with a Type-C cable, release ``BOOT`` and run:
.. code-block:: bash
---
base-commit: 8dbe57ba648648c4897717cebbc4505a8e0a8c23
change-id: 20260715-improve-lpi4a-doc-feed8191d37c
Best regards,
--
Michael Opdenacker <michael.opdenacker@rootcommit.com>
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2026-07-15 15:04 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-07-15 15:04 [PATCH] doc: thead: lpi4a: detail how to enable fastboot Michael Opdenacker
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox