From: Yixun Lan <dlan@kernel.org>
To: u-boot@lists.u-boot-project.org
Cc: Yao Zi <me@ziyao.cc>, Tim Ouyang <tim609@andestech.com>,
Leo Liang <leo.liang@sifive.com>, Tom Rini <trini@konsulko.com>,
Michal Simek <michal.simek@amd.com>,
Raymond Mao <raymond.mao@riscstar.com>,
Hiago De Franco <hfranco@baylibre.com>,
Junhui Liu <junhui.liu@pigmoral.tech>,
Yixun Lan <dlan@kernel.org>
Subject: [PATCH v3 1/4] board: spacemit: add SpacemiT K3 Pico-ITX
Date: Sat, 03 Oct 2026 00:34:39 +0000 [thread overview]
Message-ID: <20261003-00-basic-spacemit-k3-v3-1-dea68cd1bd7d@kernel.org> (raw)
In-Reply-To: <20261003-00-basic-spacemit-k3-v3-0-dea68cd1bd7d@kernel.org>
Add initial support for K3 Pico-ITX board, in this version, the DRAM
information is parsed from DTS "/memory" node. And with UART enabled,
the U-Boot serial console works fine now.
Signed-off-by: Yixun Lan <dlan@kernel.org>
---
arch/riscv/Kconfig | 5 +++++
arch/riscv/cpu/k3/Kconfig | 18 ++++++++++++++++++
arch/riscv/cpu/k3/Makefile | 5 +++++
arch/riscv/cpu/k3/dram.c | 21 +++++++++++++++++++++
board/spacemit/k3/Kconfig | 30 ++++++++++++++++++++++++++++++
board/spacemit/k3/MAINTAINERS | 8 ++++++++
include/configs/spacemit-k3.h | 13 +++++++++++++
7 files changed, 100 insertions(+)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index c1b2890f1f3..386241efd4a 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -53,6 +53,9 @@ config TARGET_SIPEED_MAIX
config TARGET_SPACEMIT_K1
bool "Support Spacemit K1 SoC"
+config TARGET_SPACEMIT_K3
+ bool "Support SpacemiT K3 SoC"
+
config TARGET_STARFIVE_VISIONFIVE2
bool "Support StarFive VisionFive2 Board"
select BOARD_LATE_INIT
@@ -124,6 +127,7 @@ source "board/sophgo/milkv_duo/Kconfig"
source "board/sophgo/milkv_duo_256m/Kconfig"
source "board/sophgo/licheerv_nano/Kconfig"
source "board/spacemit/k1/Kconfig"
+source "board/spacemit/k3/Kconfig"
source "board/starfive/visionfive2/Kconfig"
source "board/thead/th1520_lpi4a/Kconfig"
source "board/xilinx/mbv/Kconfig"
@@ -138,6 +142,7 @@ source "arch/riscv/cpu/mpfs/Kconfig"
source "arch/riscv/cpu/generic/Kconfig"
source "arch/riscv/cpu/jh7110/Kconfig"
source "arch/riscv/cpu/k1/Kconfig"
+source "arch/riscv/cpu/k3/Kconfig"
source "arch/riscv/cpu/k230/Kconfig"
source "arch/riscv/cpu/th1520/Kconfig"
diff --git a/arch/riscv/cpu/k3/Kconfig b/arch/riscv/cpu/k3/Kconfig
new file mode 100644
index 00000000000..5474ac11243
--- /dev/null
+++ b/arch/riscv/cpu/k3/Kconfig
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Copyright (C) 2026 Yixun Lan <dlan@kernel.org>
+
+if TARGET_SPACEMIT_K3
+
+config SPACEMIT_K3
+ bool
+ select BINMAN
+ select ARCH_EARLY_INIT_R
+ select SYS_CACHE_SHIFT_6
+ imply CPU
+ imply CPU_RISCV
+ imply RISCV_TIMER if RISCV_SMODE
+ imply CMD_CPU
+ imply OF_UPSTREAM
+
+endif
diff --git a/arch/riscv/cpu/k3/Makefile b/arch/riscv/cpu/k3/Makefile
new file mode 100644
index 00000000000..fba4e4b0a3f
--- /dev/null
+++ b/arch/riscv/cpu/k3/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Copyright (C) 2026 Yixun Lan <dlan@kernel.org>
+
+obj-y += dram.o
diff --git a/arch/riscv/cpu/k3/dram.c b/arch/riscv/cpu/k3/dram.c
new file mode 100644
index 00000000000..e20d35dc1bf
--- /dev/null
+++ b/arch/riscv/cpu/k3/dram.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2026 Yixun Lan <dlan@kernel.org>
+ */
+
+#include <fdtdec.h>
+#include <init.h>
+#include <linux/sizes.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ return fdtdec_setup_mem_size_base();
+}
+
+int dram_init_banksize(void)
+{
+ return fdtdec_setup_memory_banksize();
+}
diff --git a/board/spacemit/k3/Kconfig b/board/spacemit/k3/Kconfig
new file mode 100644
index 00000000000..1a63c73b6bb
--- /dev/null
+++ b/board/spacemit/k3/Kconfig
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Copyright (C) 2026 Yixun Lan <dlan@kernel.org>
+
+if TARGET_SPACEMIT_K3
+
+config SYS_BOARD
+ default "k3"
+
+config SYS_VENDOR
+ default "spacemit"
+
+config SYS_CPU
+ default "k3"
+
+config SYS_CONFIG_NAME
+ default "spacemit-k3"
+
+config TEXT_BASE
+ default 0x102000000
+
+config SPL_OPENSBI_LOAD_ADDR
+ hex
+ default 0x100000000
+
+config BOARD_SPECIFIC_OPTIONS
+ def_bool y
+ select SPACEMIT_K3
+
+endif
diff --git a/board/spacemit/k3/MAINTAINERS b/board/spacemit/k3/MAINTAINERS
new file mode 100644
index 00000000000..34cf1ed4453
--- /dev/null
+++ b/board/spacemit/k3/MAINTAINERS
@@ -0,0 +1,8 @@
+SPACEMIT K3
+M: Yixun Lan <dlan@kernel.org>
+S: Maintained
+F: arch/riscv/cpu/k3/
+F: board/spacemit/k3/
+F: configs/spacemit_k3_defconfig
+F: include/configs/k3.h
+F: arch/riscv/dts/k3-u-boot.dtsi
diff --git a/include/configs/spacemit-k3.h b/include/configs/spacemit-k3.h
new file mode 100644
index 00000000000..9dd545e2a3b
--- /dev/null
+++ b/include/configs/spacemit-k3.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2026 Yixun Lan <dlan@kernel.org>
+ */
+
+#ifndef __SPACEMIT_K3_H
+#define __SPACEMIT_K3_H
+
+#define CFG_SYS_NS16550_IER 0x40
+
+#define RISCV_SMODE_TIMER_FREQ 24000000
+
+#endif /* __SPACEMIT_K3_H */
--
2.56.0
next prev parent reply other threads:[~2026-10-03 0:35 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-03 0:34 [PATCH v3 0/4] riscv: spacemit: Add support for K3 Pico-ITX board Yixun Lan
2026-10-03 0:34 ` Yixun Lan [this message]
2026-10-03 10:02 ` [PATCH v3 1/4] board: spacemit: add SpacemiT K3 Pico-ITX E Shattow
2026-10-03 11:08 ` Yixun Lan
2026-10-03 11:18 ` E Shattow
2026-10-03 0:34 ` [PATCH v3 2/4] riscv: dts: spacemit: k3: add binman node Yixun Lan
2026-10-03 7:49 ` E Shattow
2026-10-03 10:14 ` Yixun Lan
2026-10-03 0:34 ` [PATCH v3 3/4] configs: spacemit: Add K3 default configuration Yixun Lan
2026-10-03 8:04 ` E Shattow
2026-10-03 0:34 ` [PATCH v3 4/4] doc: spacemit: k3: Add Pico-ITX board Yixun Lan
2026-10-03 12:43 ` E Shattow
2026-10-04 1:39 ` Yixun Lan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261003-00-basic-spacemit-k3-v3-1-dea68cd1bd7d@kernel.org \
--to=dlan@kernel.org \
--cc=hfranco@baylibre.com \
--cc=junhui.liu@pigmoral.tech \
--cc=leo.liang@sifive.com \
--cc=me@ziyao.cc \
--cc=michal.simek@amd.com \
--cc=raymond.mao@riscstar.com \
--cc=tim609@andestech.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.u-boot-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox