Re: [PATCH] sunxi: h616: defconfigs: enable eMMC

["Jernej Škrabec" <jernej.skrabec@gmail.com>]

Dne četrtek, 27. marec 2025 ob 22:21:02 Srednjeevropski standardni čas je Andre Przywara napisal(a):
> Now that eMMC is working properly on H616 devices, it became apparent
> that some boards were missing the right defconfig bits to enable eMMC
> access.
> 
> Add the eMMC device number to the Tanix TX1 and the X96 Mate defconfig,
> also the eMMC boot option to the TX1. Oddly enough the X96 Mate had
> just this bit already.
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Expected consequence of the fix :)

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

> ---
>  configs/tanix_tx1_defconfig | 2 ++
>  configs/x96_mate_defconfig  | 1 +
>  2 files changed, 3 insertions(+)
> 
> diff --git a/configs/tanix_tx1_defconfig b/configs/tanix_tx1_defconfig
> index 28cf9513c30..00e34dc5ad9 100644
> --- a/configs/tanix_tx1_defconfig
> +++ b/configs/tanix_tx1_defconfig
> @@ -14,11 +14,13 @@ CONFIG_MACH_SUN50I_H616=y
>  CONFIG_SUNXI_DRAM_H616_LPDDR3=y
>  CONFIG_R_I2C_ENABLE=y
>  # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
>  CONFIG_SPL_I2C=y
>  CONFIG_SPL_SYS_I2C_LEGACY=y
>  CONFIG_SYS_I2C_MVTWSI=y
>  CONFIG_SYS_I2C_SLAVE=0x7f
>  CONFIG_SYS_I2C_SPEED=400000
> +CONFIG_SUPPORT_EMMC_BOOT=y
>  CONFIG_AXP313_POWER=y
>  CONFIG_AXP_DCDC3_VOLT=1200
>  CONFIG_USB_EHCI_HCD=y
> diff --git a/configs/x96_mate_defconfig b/configs/x96_mate_defconfig
> index bd9b611d6f5..c0628370df9 100644
> --- a/configs/x96_mate_defconfig
> +++ b/configs/x96_mate_defconfig
> @@ -11,6 +11,7 @@ CONFIG_DRAM_SUNXI_TPR11=0xffffdddd
>  CONFIG_DRAM_SUNXI_TPR12=0xfedf7557
>  CONFIG_MACH_SUN50I_H616=y
>  CONFIG_SUNXI_DRAM_H616_DDR3_1333=y
> +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
>  CONFIG_R_I2C_ENABLE=y
>  # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
>  CONFIG_SPL_I2C=y
>