[PATCH] arm: dtsi: sama5d2: Add uart4 definition to sama5d2.dtsi

[Eugen.Hristev at microchip.com <Eugen.Hristev@microchip.com>]

On 07.05.2020 17:23, Tiaki Rice wrote:
> Eugen,
> 
> Ah, I suspect the issue might be might be because I changed the subject inside the file but the did not change the filename. I shouldn't have done it that way anyway. Regarding windows vs linux, doing a diff between them showed no differences aside from the tag at the end describing the git version.
> 
> I have amended the commit and attached both the windows git patch I originally submitted for reference (0001-dtsi...) and the new patch created under CentOS8 (0001-arm-dtsi...). If you can't see any problems, should I try emailing the patch to the list again?
> 
> 

Ok, your patch looks good. I can see it now in patchwork. Maybe it was a 
patchwork glitch.


I will modify the patch a little bit to comply with the shortlog rules:
ARM must be in caps
then dts, no need to put dtsi, and no need to mention sama5d2.dtsi again 
in shortlog (ARM: dts: sama5d2 means it's sama5d2.dtsi )

like:

ARM: dts: sama5d2: add uart4 definition

if you feel like doing that yourself, modify and send a v2 patch (git 
format-patch -v 2) and send it again with git send-email.

Thanks again !
Eugen



> Regards, Tiaki
> 
> -----Original Message-----
> From: Eugen.Hristev at microchip.com <Eugen.Hristev@microchip.com>
> Sent: Thursday, 7 May 2020 9:55 PM
> To: tiakirice at hotmail.com
> Cc: u-boot at lists.denx.de
> Subject: Re: [PATCH] arm: dtsi: sama5d2: Add uart4 definition to sama5d2.dtsi
> 
> On 07.05.2020 14:32, Tiaki Rice wrote:
>> Eugen,
>>
>> Thanks for the speedy reply, I did not know about this script! I must have glossed over it in the uboot patch documentation page.
>>
>> The commit line is 82 characters which is longer than the preferred max of 75. Oops. Don't think this warning would be stopping the patch going through though...
>>
> 
> Hi,
> 
> For sure that won't be a problem with patchwork.
> however , it looks like your patch is windows-generated ? That might be an issue, I do not know. Can you send me your patch as attachment file ?
> 
> Thanks
> 
>>
>> Here is the output for the patch:
>> -----
>>       $ ./scripts/checkpatch.pl 0001-dtsi-sama5d2-Add-uart4-definition-to-sama5d2.dtsi.patch
>>       WARNING: Possible unwrapped commit description (prefer a maximum 75 chars per line)
>>       #7:
>>       This patch adds support for uart4 to the processor level device tree include file.
>>
>>       total: 0 errors, 1 warnings, 0 checks, 14 lines checked
>>
>>       NOTE: For some of the reported defects, checkpatch may be able to
>>             mechanically convert to the typical style using --fix or --fix-inplace.
>>
>>       0001-dtsi-sama5d2-Add-uart4-definition-to-sama5d2.dtsi.patch has style problems, please review.
>>
>>       NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX
>> MULTISTATEMENT_MACRO_USE_DO_WHILE NETWORKING_BLOCK_COMMENT_STYLE
>> PREFER_ETHER_ADDR_COPY USLEEP_RANGE
>>
>>       NOTE: If any of the errors are false positives, please report
>>             them to the maintainer, see CHECKPATCH in MAINTAINERS.
>> -----
>>
>> Regards,
>>
>> Tiaki Rice
>>
>> -----Original Message-----
>> From: Eugen.Hristev at microchip.com <Eugen.Hristev@microchip.com>
>> Sent: Thursday, 7 May 2020 8:19 PM
>> To: tiakirice at hotmail.com
>> Cc: u-boot at lists.denx.de
>> Subject: Re: [PATCH] arm: dtsi: sama5d2: Add uart4 definition to
>> sama5d2.dtsi
>>
>> On 07.05.2020 12:21, Tiaki Rice wrote:
>>
>>> Hello Eugen,
>>>
>>> I'm new to this whole mailing list patchwork thingy so I suspect I didn't quite submit the patch correctly, maybe you can point me in the right direction.
>>>
>>> What I did:
>>> - Made the changes on master and locally commited them
>>> - Created a patch using  'git format-patch' and modified the patch file email body.
>>> - Used 'git send-email' to send the patch to u-boot at lists.denx.de and
>>> Cc'd you
>>>
>>> This opened my Outlook of which I checked to make sure the email was plain text and then sent it. Any ideas?
>>>
>>
>> Hi Tiaki,
>>
>>    From my perspective you did everything very well. The patch looks sent fine. I would only have one question, did you check your patch with the built-in perl script that automatically checks your patch for formatting ?
>> ./scripts/checkpatch.pl --strict <your patch file>
>>
>> About patchwork, I think it may be an issue with patchwork.
>>
>> Eugen
>>
>>
>>>
>>> Thanks in advance,
>>>
>>> Tiaki Rice
>>>
>>> -----Original Message-----
>>> From: Eugen.Hristev at microchip.com <Eugen.Hristev@microchip.com>
>>> Sent: Thursday, 7 May 2020 7:12 PM
>>> To: tiakirice at hotmail.com; u-boot at lists.denx.de
>>> Subject: Re: [PATCH] arm: dtsi: sama5d2: Add uart4 definition to
>>> sama5d2.dtsi
>>>
>>> On 07.05.2020 07:43, Tiaki Rice wrote:
>>>> This patch adds support for uart4 to the processor level device tree include file.
>>>>
>>>>
>>>> Signed-off-by: Tiaki Rice <tiakirice@hotmail.com>
>>>> Cc: Eugen Hristev <Eugen.Hristev@microchip.com>
>>>> ---
>>>
>>> Hi,
>>>
>>> Thanks for contributing !
>>>
>>> I have an issue with this patch missing from patchwork.
>>> Anyone has any idea why that happened ?
>>>
>>> Eugen
>>>
>>>>      arch/arm/dts/sama5d2.dtsi | 8 ++++++++
>>>>      1 file changed, 8 insertions(+)
>>>>
>>>> diff --git a/arch/arm/dts/sama5d2.dtsi b/arch/arm/dts/sama5d2.dtsi
>>>> index 5adc47b906..6fb2cb25f9 100644
>>>> --- a/arch/arm/dts/sama5d2.dtsi
>>>> +++ b/arch/arm/dts/sama5d2.dtsi
>>>> @@ -746,6 +746,14 @@
>>>>      status = "disabled";
>>>>      };
>>>>
>>>> +uart4: serial at fc00c000 {
>>>> +compatible = "atmel,at91sam9260-usart"; reg = <0xfc00c000 0x100>;
>>>> +clocks = <&uart4_clk>; clock-names = "usart"; status = "disabled";
>>>> +};
>>>> +
>>>>      i2c1: i2c at fc028000 {
>>>>      compatible = "atmel,sama5d2-i2c";
>>>>      reg = <0xfc028000 0x100>;
>>>> --
>>>> 2.22.0.windows.1
>>>>
>>>
>>
>