* [U-Boot-Users] where could I find the driver for BCM5461？
[not found] <mailman.692561.1193925824.7786.u-boot-users@lists.sourceforge.net>
@ 2007-11-01 14:53 ` xiangguo_li at hotmail.com
2007-11-01 15:02 ` [U-Boot-Users] where could I find the driver for BCM5461? Ben Warren
0 siblings, 1 reply; 4+ messages in thread
From: xiangguo_li at hotmail.com @ 2007-11-01 14:53 UTC (permalink / raw)
To: u-boot
i could not find it in U-Boot, and i google to see that there is something
about it in a linux. anyone use this chip for ethernet? how do you solve it
in U-boot?
thank you.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot-Users] where could I find the driver for BCM5461?
2007-11-01 14:53 ` [U-Boot-Users] where could I find the driver for BCM5461？ xiangguo_li at hotmail.com
@ 2007-11-01 15:02 ` Ben Warren
[not found] ` <BAY133-DS375A69428F4ACF0604870918C0@phx.gbl>
0 siblings, 1 reply; 4+ messages in thread
From: Ben Warren @ 2007-11-01 15:02 UTC (permalink / raw)
To: u-boot
xiangguo_li at hotmail.com wrote:
> i could not find it in U-Boot, and i google to see that there is something
> about it in a linux. anyone use this chip for ethernet? how do you solve it
> in U-boot?
> thank you.
>
>
>
It depends, which Ethernet controller are you hooking this PHY up to?
regards,
Ben
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot-Users] where could I find the driver for BCM5461?
[not found] ` <BAY133-DS375A69428F4ACF0604870918C0@phx.gbl>
@ 2007-11-01 15:23 ` Ben Warren
2007-11-01 16:09 ` Josh Boyer
0 siblings, 1 reply; 4+ messages in thread
From: Ben Warren @ 2007-11-01 15:23 UTC (permalink / raw)
To: u-boot
xiangguo_li at hotmail.com wrote:
> it is connected to Tsi109 from Tundra.
>
>
Well, U-boot has support for Tundra Tsi108, which is hopefully very
similar to the Tsi109. The Tsi108 driver does all its own PHY handling
(i.e. doesn't use the miiphyutil infrastructure) and currently only
supports the Marvell 88e1111 PHY.
The good news is that modern PHYs are pretty standards-compliant, and it
should be pretty easy for you to get the BCM5461 working.
Also, *** PLEASE *** don't e-mail me privately without including the
U-boot list. There are lots of other people that can add perspective.
regards,
Ben
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot-Users] where could I find the driver for BCM5461?
2007-11-01 15:23 ` Ben Warren
@ 2007-11-01 16:09 ` Josh Boyer
0 siblings, 0 replies; 4+ messages in thread
From: Josh Boyer @ 2007-11-01 16:09 UTC (permalink / raw)
To: u-boot
On Thu, 01 Nov 2007 11:23:05 -0400
Ben Warren <bwarren@qstreams.com> wrote:
> xiangguo_li at hotmail.com wrote:
> > it is connected to Tsi109 from Tundra.
> >
> >
> Well, U-boot has support for Tundra Tsi108, which is hopefully very
> similar to the Tsi109. The Tsi108 driver does all its own PHY handling
> (i.e. doesn't use the miiphyutil infrastructure) and currently only
> supports the Marvell 88e1111 PHY.
I'm not sure about U-Boot, but from a Linux kernel perspective, Tsi108
and Tsi109 are the same.
josh
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2007-11-01 16:09 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <mailman.692561.1193925824.7786.u-boot-users@lists.sourceforge.net>
2007-11-01 14:53 ` [U-Boot-Users] where could I find the driver for BCM5461？ xiangguo_li at hotmail.com
2007-11-01 15:02 ` [U-Boot-Users] where could I find the driver for BCM5461? Ben Warren
[not found] ` <BAY133-DS375A69428F4ACF0604870918C0@phx.gbl>
2007-11-01 15:23 ` Ben Warren
2007-11-01 16:09 ` Josh Boyer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox